Goblin 700-770 Competition

Aluminum Motor Pulley 24T (for 6/8mm motor shaft) for Goblin 700/770

Includes:

• Aluminum Motor Pulley 24T x 1pc
• Brass Bushing Motor Pulley Support x 1pc
• DIN 12.9 Cup Point Set Screw M4 x 4 x 1pc
• DIN 12.9 Cup Point Set Screw M4 x 6 x 1pc

Use for:

•  Goblin 770
•  Goblin 700 Competition

Must be used with big motor belt, big one way pulley,big front tail pulley.

Main Blade Grip Conversion Kit for Goblin 700/770 Competition/ Goblin Speed

Includes:

•  Aluminum Main Blade Grip x 2pcs
•  Aluminum Main Blade Grip Arm x 2pcs
•  Socket Head Cap M4 x 10 x 2pcs
•  ABEC5 Bearing 10 x 19 x 5 x 4pcs
•  ABEC5 Thrust bearing 10x 18 x 5,5 x 2pcs
•  Shims 10 x 16 x 1 x 2pcs
•  Uniball M3x4 5 H3.5 x 2pcs
•  Plastic ball linkages x 4pcs
•  Aluminum Main Linkage x 2pcs
•  Steel Main Linkage x 2pcs

Included:

• Aluminum center hub x 1pc
• Shoulder cap screw M4x24 x 1pc
• Metric hex locknut Nuts M4 H5 x 1pc
• DIN 12.9 Socket Head Cap M3x12 x 2pcs
  

Use on HPS head Goblin 700 & Goblin 770

DIN 12.9 Shouldered Socket Head Cap M5x35 Special for Goblin 700/770 main blade grip

Included items:
 2 x Socket Head Cap Screw M5x35mm Special    
 2 x Metric Hex NYLON Nuts M5  H4,8

Spindle Shaft for Goblin 700/770

Included items

• 1 x Spindle Shaft
• 2 x Socket Head Cap Screw M6x10mm    
• 2 x Washer Ø6,3 x Ø15 x 1mm

H0153-S Carbon Fiber ESC Support for Goblin 770 - 630/700 Competition

Included:

• Secondary shaft M3 x 1pc
• DIN 12.9 Shoulder Socket Head Cap Screw M2.5x19 x 1pc
• Metric Hex NYLON Nuts M2,5 H3,5
• DIN 12.9 Socket Head Cap  M3x22 Shoulder x 1pc
• Metric hex locknut Nuts M3 H4 x 1pc

Use for:

• Goblin 770
• Goblin 630/700 Competition

(Replacement product of H0022-S)

BIG BELT KIT UPGRADE for The SAB Goblin 770

Includes:

•  Aluminum Heavy Duty One Way Pulley x 1pc
•  Aluminum Heavy Duty Front Tail Pulley x 1pc
•  Aluminum Tail Belt Idler Support x 1pc
•  Aluminum Tail Servo Spacer x 1pc
•  Heavy Duty Motor Belt x 1pc
•  Shims 10 x 16 x 0,2 x 3pcs
•  One Way Brass Bushing x 1pc
•  Socket Head Cap M2.5 x 19 x 1pc
•  Metric Hex Locknut Nuts M2,5 H3,5 x 1pc
•  Socket Head Cap M3 x 40 x 1pc
•  Carbon Fiber Servo Spacer x 2pcs
•  Socket Head Cap M2.5 x 18 x 4pcs

• Carbon Fiber Swash Plate Antirotation x 1pc
• Aluminum Finishing Washers x 1pc
• DIN 12.9 Socket Head Cap M3x8 x 1pc

Worldwide Patented Carbon Fiber Tail Boom Yellow for Goblin 770/ 770 Competition

Includes:

•  Carbon Fiber Tail Boom Yellow x 1pc
•  Carbon Fiber Tail Locking Reinforcement x 2pcs
•  Doulble Side Tape x 2pcs
•  Cup Point Set Screws M3X20 x 1pc
•  Washer Ø3,1 x Ø12 x 1.8 x 2pcs
•  Metric hex locknut Nuts M3 H4 x 4pcs
•  Aluminum Tail Boom Support x 2pcs
•  Socket Head Cap M3x12 x 2pcs
•  Nylon Screw M8 x 20 x 2pcs
•  Flat Head Socket Cap M3x8 x 1pc

HC238-S Carbon Fiber Tail Push Rod for the SAB Goblin 770

Heavy Duty Steel Pinion 19T for Goblin 770 Competition/Speed

• Heavy Duty Steel Pinion 19T x 1pc
• Shoulder Socket Head Cap Screw M3 x 18 x 1pc
• Metric hex locknut Nuts M3 H4 x 1pc

High Performance Main Belt for the SAB Goblin 770

High Performance Motor Belt for Goblin 770

Includes:

• 240-3MGT Motor Belt 19mm x 1pc

Must be used with:

• Big One Way Pulley Part # H0171-S :
• Big Motor Pulley Part # H0175-**-S

Aluminum Tail Pulley 24T for Goblin 770

Included items:

• Aluminum Tail Pulley 24T x 1
• DIN 12.9 Cone Point Set Screws M4x4 x 2pcs

Aluminum Tail Pulley 25T for Goblin 770

Included items

• Aluminum Tail Pulley 25T x 1pc
• DIN 12.9 Cone Point Set Screws M4x4 x 2pcs

H0127-S Steel Main Shaft for The SAB Goblin 770 

Included items:

• Steel Main Shaft x 1pc
• DIN 12.9 Socket Head Cap M4x22 x 1pc
• Metric hex locknut Nuts M4 H5 x 3pc
• Shoulder cap screw M4x24 x 1pc

Goblin Black FBL support Low

Includes:

• Aluminum FBL support x 3pcs
• Flat Head Socket Cap Screw M3x8mm x 1pc
• Socket Head Cap Screw M3x6mm x 5pcs

Compatible with:

• Goblin 630CO/700CO/770CO/Black Nitro/SPORT/Black Thunder/Urukay CO

Goblin Black Nitro SAB Fuel Stop

Includes:

• SAB Fuel Stop x 2pcs
• SAB T connector x 2pcs

Compatible with:

• Goblin Black Thunder
• Goblin Black Nitro
• Goblin 630/700/770

Included:

• Aluminum Blade Grip Arm x 2pcs
• DIN 12.9 Socket Head Cap M3x10 x 2pcs
• Uniball M3x4 Ø5 H3.5 x 2pcs

Use for:

• Goblin 700 HPS head only
• Goblin 770

GOBLIN Kraken Aluminum FBL Support

Includes:

• Carbon Fiber FBL support x 2pcs
• Aluminum FBL Plate x 1pc
• Aluminum FBL Mouting Plate x 1pc
• Aluminum Spacer x 2pcs
• G10 Receiver support x 1pc
• Socket Head Cap Screws M3 x 8 x 4pcs
• Socket Head Cap Screws M2.5 x 6 x 4pcs
• Finishing Washer M2.5 x 2pcs

Used for:
Goblin Kraken

GOBLIN Kraken Blade Grip Arm 26mm

Includes:

Blades Grip Arm 26mm x 2pcs
Uniball M3 x 4.5 D5 H3 x 2pcs
Socket Head Cap M4x10 x 2pcs

Used for:
Goblin Kraken

GOBLIN Kraken Boom Yellow/Blue

Includes:

• Carbon Fiber boom Yellow x 1pc
• Locking Element Tail x 2pcs
• G10 M10 Block Nut x 1pc
• Double side tape x 2pcs
• Metric Hex Nylon Nuts M3 H4 x 4pcs (already assembled)

Used for:
Goblin Kraken

GOBLIN Kraken Canopy Yellow/Blue

Includes:

• Carbon Fiber Canopy Yellow x 1pc
• Canopy Grommet x 2pcs

Used for:
Goblin Kraken

GOBLIN Kraken Damper Kit Set

Includes:

• Delriin Damper A x 2pcs
• Delriin Damper B x 2pcs
• Delriin Damper C x 2pcs
• Steel Shim 10 x 16 x 0.2 x 4pcs
• 90 Shore Orings x 8pcs
• 80 Shore Orings x 8pcs

Used for:
Goblin Kraken

GOBLIN Kraken Low Side Frame L Yellow/Blue

Includes:

• Yellow Cater Right (Lighter version) x 1pc

Used for:
Goblin Kraken

GOBLIN Kraken Low Side Frame R Yellow/Blue

Includes:

• Yellow Cater Right (Lighter version) x 1pc

Used for:
Goblin Kraken

GOBLIN Kraken Pulley HTD 3M Z26

Includes:

• Aluminum Pulley HTD 3M Z26 x 1pc
• Socket Head Cap Screws M2 x 5 x 6pcs (already assembled)
• Set screw M4 x 6 x 1pc

Used for:
Goblin Kraken

GOBLIN Kraken Swashplate Leveler

Includes:

• Kraken Washplate Leveler x 1pc
• Magnet N52, D5 x 6mm

Used for:
Goblin Kraken

GOBLIN Kraken Titanium Main Shaft

Includes:

• Titanium Main Shaft 12mm x 1pc
• Shoulder Screws M4 x 24 x 1pc
• Metric Hex Nylon Nuts M4 H5 x 1pc
• Shouder Screw M4x 21.5mm x 1pc

Used for:
Goblin Kraken

GOBLIN Kraken Titanium Spindle

Includes:

• Titanium Main Spindle x 1pc
• Socket Head Cap Screws M6 X 10 x 2pcs
• Steel Washer 6.1 x 14 x 1.8 x 2pcs

Used for:
Goblin Kraken

GOBLIN Kraken Transmission Bearing Set

Includes:

• 1 x Bearing 12 x 24 x 6
• 2 x Bearing 8 x 16 x 5 (MR688-2RS)
• 2 x Bearing 10 x 22 x 6 mm ( 6900-2RS)
• 1 x Bearing 12 x 28 x 7mm ( 16001-2RS)
• 3 x Ball Bearing 6x13x5 (MR686ZZ)

Used for:
Goblin Kraken

GOBLIN Kraken White Landing Gear

Includes:

• 2 x Landing Gear Kraken (white)
• 4 x Set screw M4 x 4
• 4 x Metric Hex Nylon Nuts M3 H4

Used for:
Goblin Kraken

Includes:

- FBL/RX Support x 1 Set

Used for:

- Goblin RAW 580

Goblin THREAD ROD pushrod m2.5x18, 10 pcs