Radio Trays & Cases

Radio Trays & Cases

Cases to protect your radios, different brands, fits different radio transmitters

Page of 2
Combo Tablet Holder Baldur for DJI Mavic Air 2 et Mini 2 - LifThor

Combo Tablet Holder Baldur for DJI Mavic Air 2 et Mini 2 - LifThor

Combo Tablet Holder Baldur fpr DJI Mavic Air 2 et Mini 2 - LifThor includes 3 video feed cables lanyard & storage bag

Support tablets 7.9-13"

€119.00

Inc. VAT
DJI Mavic Pro Transmitter Carbon fiber tray

DJI Mavic Pro Transmitter Carbon fiber tray

Transmitter Carbon fiber tray for DJI MAVIC PRO.

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick carbon composite material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI MAVIC PRO.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

  • Material: Carbon composite material
  • Dimensions: approx. 250 x 165 x 130 mm
  • Weight: approx. 290 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.
  • Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

  • HAB (Hand rest Rubber pad B for Tray station-Black)

 

 

€89.90

Inc. VAT
Quantity
DJI RC Pro & DJI Mavic 3 Cine Premium Radio tray in Black

DJI RC Pro & DJI Mavic 3 Cine Premium Radio tray in Black

The transmitter tray  is suitable for the following transmitters:

DJI RC PRO (NOT for DJI RC)

Very stable transmitter  tray in a modern design made of G10 black with carbon-look hand rests.

The tray is made of high-quality fiberglass plastic with stable stainless steel suspension brackets,
which are ideal for carrying the transmitter. All connections and the battery compartment of the transmitter are freely accessible.

The transmitter is firmly fixed in the transmitter desk, it is not possible to fall out, the transmitter can be
quickly removed from the desk without tools.
The transmitter console bracket and aluminum connectors are mounted in the precisely fitting millings of the GRP plates
and screwed with rustproof stainless steel screws.

We also recommend:
FPV extension made of GRP

Dimensions:
Width : 285 mm
Depth without transmitter: 150 mm
Height with standard transmitter bracket: 130 mm
Height with foldable transmitter bracket: 160 mm / folded: 105 mm

The tray is supplied as a kit including the necessary tools.

Scope of delivery: transmitter tray with standard transmitter desk bracket or foldable transmitter coil bracket, selectable without hand rest or with hand rest
The tray is of course delivered without a transmitter, without an FPV extension and without a belt.

€75.00

Inc. VAT
Quantity
FPV Carbon tray Tablet holder adaptor for carbon trays

FPV Carbon tray Tablet holder adaptor for carbon trays

FPV Carbon tray Tablet holder adaptor for carbon trays

Stable FPV extension for transmitter trays in modern carbon design.
The FPV expansion is well suited for the video flight with Coptern, airplanes or helicopters.

For rear mounting of the monitor.
for foot mounting or side mounting requires one additional parts.

Compatible with our tablet holder.

Material: Carbon black GF3

  • Weight about 200 g
  • FPV without transmitter tray, without transmitter, without monitor, without accessories & without rubber hand rest pads.

 

€65.50

Inc. VAT
Quantity
FrSky HORUS X10 carbon fiber Transmitter tray

FrSky HORUS X10 carbon fiber Transmitter tray

FrSky HORUS X10 carbon fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick carbon fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

  • Material: Carbon composite material
  • Dimensions: approx. 305 x 160 x 145 mm
  • Weight: approx. 290 g
  • Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
  • Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

  • HAB (Hand rest Rubber pad B for Tray station-Black)

 

 

€89.90

Inc. VAT
Quantity
FrSky HORUS X12S black GFK fiber Transmitter Tray

FrSky HORUS X12S black GFK fiber Transmitter Tray

FrSky HORUS X12S black GFK fiber Transmitter Tray

The desk is made of high quality, 2mm thick GFK fiber material with support bars made of stainless steel, the radio can be worn optimally.

The transmitter tray is suitable for transport in any standard aluminum case.

This radio tray fits:

  • Horus (FrSky)

Specifications:

  • Material: carbon composite material
  • Dimensions: 340 x 170 x 125 mm
  • Weight: 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

*Transmitter Horus NOT included!

 

€65.90

Inc. VAT
Quantity
FrSky HORUS X12S carbon Transmitter tray

FrSky HORUS X12S carbon Transmitter tray

FrSky HORUS X12S carbon Transmitter tray

The desk is made of high quality, 2mm thick carbon composite material with support bars made of stainless steel, the radio can be worn optimally.

The transmitter tray is suitable for transport in any standard aluminum case.

This radio tray fits:

  • Horus (FrSky)

Specifications:

  • Material: carbon composite material
  • Dimensions: 340 x 170 x 125 mm
  • Weight: 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

*Transmitter Horus NOT included!

 

€89.90

Inc. VAT
FrSky Taranis X9D in Black GFK fiber Transmitter tray

FrSky Taranis X9D in Black GFK fiber Transmitter tray

FrSky Taranis X9D in Black GFK fiber Transmitter tray

Can be used with FPV1 extension if you wish to use tablet or large phone.

The Tray is made of high-quality, 2mm thick GFK fiber material with sturdy stainless steel brackets and the transmitter can be worn optimally.
The transmitter is attached to the transmitter console with a special holder developed for the DJI SPARK.
The transmitter console is suitable for transport in any standard aluminum case.
All connections and controls are accessible.

Specifications:

  • Material: Carbon composite material
  • Dimensions: approx. 305 x 160 x 145 mm
  • Weight: approx. 290 g
  • Transmitter tray without transmitter, without FPV, without neckstrap & without rubber hand rest pads.
  • Scope of delivery: Transmitter tray set, no other products included!

To complete the set:

  • HAB (Hand rest Rubber pad B for Tray station-Black)

 

 

€55.90

Inc. VAT
Quantity
Futaba 12FG Carbon Transmitter Tray set with Neck strap, Demo

Futaba 12FG Carbon Transmitter Tray set with Neck strap, Demo

this is a Demo tray fits Futaba 12FG

this tray was used for some time, but in perfect condition, comes with Neck strap.

€129.00

€49.00

62% Off Inc. VAT
Quantity
Futaba T14SG Carbon Transmitter Tray

Futaba T14SG Carbon Transmitter Tray

Futaba T14SG Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Size: 255 x 153 x 150 mm
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€89.90

Inc. VAT
Quantity
Futaba T16IZ BLACK G10 Transmitter tray

Futaba T16IZ BLACK G10 Transmitter tray

Very stable transmitter tray in a modern BLACK g10 stainless steel design

The tray is made of high-quality G10 composite material with sturdy suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the transmitter's battery compartment are freely accessible.

The transmitter is firmly fixed in the transmitter TRAY, it cannot fall out, the transmitter can be quickly removed from the console.

The transmitter tray brackets and aluminum connectors are mounted in the precisely fitting millings of the carbon plates and screwed together with stainless steel screws.

Made in germany

Material:

Upper and lower plate, intermediate elements made of g10 composite material

Connector between the plates made of black anodized aluminum

Standard transmitter tray bracket made of stainless steel

Dimensions:

Width: 280 mm

Depth without transmitter: 185 mm / with bracket 255

Height with standard transmitter bracket: 132 mm

Height with transmitter bracket: 162 mm

The desk is delivered as a kit including the necessary tools.

Scope of delivery: Transmitter tray with standard transmitter desk bracket no hand rest.

The tray is of course delivered without transmitter, without FPV extension and without belt.

€75.00

Inc. VAT
Futaba T16IZ carbon Transmitter tray

Futaba T16IZ carbon Transmitter tray

Very stable transmitter desk in a modern carbon stainless steel design with a real and beautiful carbon 3K twill surface.

The desk is made of high-quality carbon composite material with sturdy suspension

brackets made of stainless steel on which the transmitter can be optimally carried. All connections and the transmitter's battery compartment are freely accessible.

The transmitter is firmly fixed in the transmitter TRAY, it cannot fall out, the transmitter can be quickly removed from the console.

The transmitter tray brackets and aluminum connectors are mounted in the precisely fitting millings of the carbon plates

and screwed together with stainless steel screws.

No foil - no carbon imitation - made of real carbon!

Made in germany

Material:

Upper and lower plate, intermediate elements made of carbon composite material

Connector between the plates made of black anodized aluminum

Standard transmitter tray bracket made of stainless steel

Dimensions:

Width: 280 mm

Depth without transmitter: 185 mm / with bracket 255

Height with standard transmitter bracket: 132 mm

Height with transmitter bracket: 162 mm

The desk is delivered as a kit including the necessary tools.

Scope of delivery: Transmitter tray with standard transmitter desk bracket no hand rest.

The tray is of course delivered without transmitter, without FPV extension and without belt.

€99.90

Inc. VAT
Quantity
Futaba T16SZ black GFK fiber Transmitter Tray

Futaba T16SZ black GFK fiber Transmitter Tray

Futaba T16SZ black GFK fiber Transmitter Tray

Very stable transmitter tray in the modern GFK stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick GFK material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV, neckstrap & without rubber hand rest pads.

€65.90

Inc. VAT
Quantity
Futaba T16SZ carbon Transmitter Tray

Futaba T16SZ carbon Transmitter Tray

Futaba T16SZ carbon Transmitter Tray

Very stable transmitter tray in the moderncarbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV, neckstrap & without rubber hand rest pads.

€89.90

Inc. VAT
Quantity
Futaba T18MZ Carbon Transmitter Tray

Futaba T18MZ Carbon Transmitter Tray

Futaba T18MZ Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Size: 255 x 153 x 150 mm
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€89.90

Inc. VAT
Quantity
Futaba T18SZ & T16SZ G10 COMPOSITE black radio tray

Futaba T18SZ & T16SZ G10 COMPOSITE black radio tray

Futaba T18SZ & T16SZ G10 COMPOSITE black radio tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick g10 material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: g10 BLACK
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€69.00

Inc. VAT
Quantity
Futaba T18SZ Carbon Transmitter Tray

Futaba T18SZ Carbon Transmitter Tray

Futaba T18SZ Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€89.90

Inc. VAT
Quantity
Futaba T6K Black G10 Transmitter Tray

Futaba T6K Black G10 Transmitter Tray

Futaba T6K G10 Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

    Dimensions:  Width: 295 mm
    Depth without transmitter: 150 mm
    Height with standard transmitter stand: 138 mm
    Height with folding transmitter panel bracket: 168 mm / folded: 113 mm
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€69.00

Inc. VAT
Quantity
Futaba T7PX Radio Case

Futaba T7PX Radio Case

Futaba T7PX Radio Case

€119.00

Inc. VAT
Quantity
Futaba T8J & T10J Carbon Transmitter Tray

Futaba T8J & T10J Carbon Transmitter Tray

Futaba T8J & T10J Carbon Transmitter Tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick omposite material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Specification:

  • Material: Carbon
  • Size: 255 x 153 x 150 mm
  • Weight: about 300 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€79.90

Inc. VAT
Quantity
Hand rest Rubber pad A for Tray station

Hand rest Rubber pad A for Tray station

Modern and comfortable rubber hand rest pad for our Tray station:

  • DX5
  • MC16
  • MC20
  • MC32

The hand rest pad made from foam rubber is red in the colors and available black.

Supply: 2 hand rest pads, without Tray station & without FPV.

€9.90

Inc. VAT
Quantity
Hand rest Rubber pad B for Tray station (Black)

Hand rest Rubber pad B for Tray station (Black)

Modern and comfortable rubber hand rest pad for our Tray station:
 

  • Jeti DC16
  • Jeti DS16
  • FrSky Taranis
  • Spectrum DX9
  • Phantom DJI.

The hand rest pad made from foam rubber is black in the colors and available black.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

€9.90

Inc. VAT
Quantity
Hand rest Rubber pad B for Tray station (Blue)

Hand rest Rubber pad B for Tray station (Blue)

Modern and comfortable rubber hand rest pad for our Tray station:
 

  • Jeti DC16
  • Jeti DS16
  • FrSky Taranis
  • Spectrum DX9
  • Phantom DJI.

The hand rest pad made from foam rubber is blue.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

€9.90

Inc. VAT
Quantity
Hand rest Rubber pad B for Tray station (Orange)

Hand rest Rubber pad B for Tray station (Orange)

Modern and comfortable rubber hand rest pad for our Tray station:
 

  • Jeti DC16
  • Jeti DS16
  • FrSky Taranis
  • Spectrum DX9
  • Phantom DJI.

The hand rest pad made from foam rubber is orange.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

€9.90

Inc. VAT
Quantity
Hand rest Rubber pad B for Tray station (Red)

Hand rest Rubber pad B for Tray station (Red)

Modern and comfortable rubber hand rest pad for our Tray station:
 

  • Jeti DC16
  • Jeti DS16
  • FrSky Taranis
  • Spectrum DX9
  • Phantom DJI.

The hand rest pad made from foam rubber is red in the colors and available black.

Supply: 2 Handauflagenpads, without Tray station & without FPV.

€9.90

Inc. VAT
Quantity
JETI DS-16 Carbon Transmitter tray

JETI DS-16 Carbon Transmitter tray

JETI DS-16 Carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Carbon

  • 310 x 150 x 150 mm
  • Weight: about 290 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.


€89.90

Inc. VAT
Quantity
Jeti DUPLEX 2,4EX Alu-Case for Transmitter DC

Jeti DUPLEX 2,4EX Alu-Case for Transmitter DC

JETI DUPLEX 2,4EX Alu-Case for Transmitter DC
 
Contains:

  • Aluminium Transmitter suitcase
  • 2 keys
  • Foam material application fitting to DS Transmitter
     

€54.90

Inc. VAT
Quantity
Jeti DUPLEX 2,4EX Alu-Case for Transmitter DS-16 and DS-14

Jeti DUPLEX 2,4EX Alu-Case for Transmitter DS-16 and DS-14

JETI DUPLEX 2,4EX Alu-Case for Transmitter DS-16 and DS-14
 
Contains:

  • Aluminium Transmitter suitcase
  • 2 keys
  • Foam material application fitting to DS Transmitter
     

€79.00

Inc. VAT
Quantity
Jeti Duplex 2024 Aluminum case for transmitters of the DSxx series

Jeti Duplex 2024 Aluminum case for transmitters of the DSxx series

Aluminum case for transmitters of the DSxx series
 
Contains:

  • Aluminium Transmitter suitcase
  • 2 keys
  • Foam material application fitting to DS Transmitter

€155.00

Inc. VAT
Quantity
Jeti DUPLEX Tray DC-16 black

Jeti DUPLEX Tray DC-16 black

Transmitter tray made of black acrylic for transmitters DC-16

Ensures ergonomic and effortless control in conjunction with JETI DUPLEX 2.4EX harness even during long flight durations. Both, the DC-16 transmitter and the tray fit inside the carrying case of the DC-16. The clamps are foldable.

€89.00

Inc. VAT
Quantity
Jeti Tray for DC-16

Jeti Tray for DC-16

Jeti Tray for DC-16

NOTE:
Transmitter NOT included

€99.00

Inc. VAT
Quantity
Jeti Tray for DC-16 Blue

Jeti Tray for DC-16 Blue

Transmitter tray made of blue acrylic for transmitters DC-16

Ensures ergonomic and effortless control in conjunction with JETI DUPLEX 2.4EX harness (item no. J80001511) even during long flight durations. Both, the DC-16 transmitter and the tray fit inside the carrying case of the DC-16. The clamps are foldable.

€98.90

Inc. VAT
Quantity
Jeti wind and weather protection for Jeti DC Transmitter

Jeti wind and weather protection for Jeti DC Transmitter

Jeti wind and weather protection for Jeti DC Transmitter

NOTE:
Transmitter NOT included

€109.90

Inc. VAT
Quantity
JR 14 Carbon Transmitter tray

JR 14 Carbon Transmitter tray

JR 14 Carbon Transmitter tray

Very stable transmitter tray in the modern carbon stainless steel design.
The transmitter tray is made ​​of high quality 2mm thick carbon material with stainless steel frames.
The transmitter tray can be transported in any commercially available aluminum case.

Material: Carbon

  • 310 x 150 x 150 mm
  • Weight: about 290 g
  • Transmitter tray without transmitter without FPV & without rubber hand rest pads.

€79.90

Inc. VAT
Quantity
Large bracket for Tx-tray V1

Large bracket for Tx-tray V1

Large bracket for Tx-tray V1

€45.00

Inc. VAT
Quantity
Mikado Base bracket for VBar Control

Mikado Base bracket for VBar Control

Mikado Base bracket for VBar Control

€8.90

Inc. VAT
Quantity
Page of 2