Charger Accessories

Charger cables and adapters for our chargers

1-6S Lipo Battery Voltage Controller with built-in receiver

1-6S Lipo Battery Voltage Controller with built-in receiver

The MC-6S is a compact and easy to use 6S cell tester with built-in receiver and satellite check function. Simply connect the balance cable from your LiPO / LiFE battery to the balance pins to instantly read your cell voltage.
The MC-6S also functions as a receiver tester allowing you to verify the correct functioning of S.Bus, PPM, PWM and DSM satellites. An ideal tool for diagnosing receivers emitted when building FPV racing drones.

Specification:

  • Voltage input: 5-25V
  • Current consumption: 10mAh
  • Dimension: 45x31x10mm
  • Receiver output mode: S. bus, DSM1024, DSM2048, PPM, PWM
  • Cell Checker: up to 6S
  • USB input: Micro USB and USB-C

€19.00

Inc. VAT
Quantity
Cellpro adaptor to EH 5/8S

Cellpro adaptor to EH 5/8S

Adaptor to fit Cellpro chargers to transfer to EH . this is an easy way to adapt to your current balancer adaptor.

Option of cable 5S( CELLPRO 10X) and 8S for Powerlab chargers.

€5.00

Inc. VAT
Quantity
DJI Mavic Pro Battery Charging Hub w/ Cables

DJI Mavic Pro Battery Charging Hub w/ Cables

Charging Hub for DJI Mavic Pro with 4 Inputs.

NOTE:  4 Cables Included

€29.90

Inc. VAT
Quantity
Equalizer-adaptor EH (2-6S)

Equalizer-adaptor EH (2-6S)

Quantum Balance Adaptor EH Q-B-0007 2-6S

€4.00

Inc. VAT
Quantity
Equalizer-adaptor TP/FP

Equalizer-adaptor TP/FP

For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads or battery chargers with Equalizer. Can be used with 4 or 8S Equalizers.

€5.00

Inc. VAT
Quantity
Equalizer-adaptor TP/FP

Equalizer-adaptor TP/FP

For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads to robbe Equalizers or battery chargers with Equalizer.
Various connecting leads are supplied with the adaptors. Can be used with 5 or 6S Equalizers. Matches the Lipoly Equalizer 5S, the TOP Equalizers 6S, 6S 300 and 12S, and Duo Power 6S, Optimate and Eternity battery chargers

€4.00

Inc. VAT
Quantity
EV-PEAK Dual Parallel Balance Board 8S

EV-PEAK Dual Parallel Balance Board 8S

EV-PEAK Dual Parallel Balance Board 8S

allow to charge up to 2 X 8S lipos in parralel on same charger

€18.90

Inc. VAT
Quantity
EV-PEAK Para board 6 Lipo 6s balance adapter board

EV-PEAK Para board 6 Lipo 6s balance adapter board

EV-PEAK Para board allow parallel charge of up to 6 lipos 6S.

this board allow to charge up to 40amps Max, and it has XT60 connectors

€49.00

Inc. VAT
Quantity
ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

Designed for LiPo, LiHv, LiFe, LiIon batteries

Specification:

  • Working voltage: 5.0V-36V
  • Input voltage: 0.8V-15V
  • Input voltage 2-8S: 0.8V-4.8V
  • Battery cells: 1-8S
  • Voltage measurement accuracy: ±0.005V@4.2V
  • Balancing cells accurancy: 〈0.005V
  • Support USB charging: QC 2.0/3.0, BC1.2, Maximum output 12V/2A
  • Suppport smart battery: Charging and discharging setting,
  •                                        read battery info and usage history.
  • Supported Batt.Type: LiHv(1-8S)/LiPo(1-8S)/LiFe(1-8S)
  •                                    Lilon(1-8S)/NiMH/Cd(1-10S)
  • Display: 2.4//320x240 260,000 color IPS LCD
  • Dimension: 80 x 55 x 19mm
  • Weight: 59g
  • Operating Temperature: 0-40°C
  • Working Humidity: 10%-90%RH (noncondensing)
  • Storage Temperature: -20-60°C
  • Storage Humidity: 5%-90%RH (noncondensing)

Smart Battery Checker

  • 260,000 color display visible under strong sunlight.
  • Exquisite and powerful BG-8S smart battery checker fully support BattGO technology.

 
Make battery smarter

  • Cooperating with BattGO technology, only with XT60i connected and you can get full knowledge on detail parameters on your batter.
  • Easy to read cells voltage, battery circulations, working parameters and fast set to your preferred settings.

Auto balancing cells voltage

  • Advanced auto balancing algorithm, make sure every cell is well balanced.
  • After completion auto into low power mode.

 
Powerful portable charging function

  • Connecting to your battery, BG-8S can become your power bank for mobile devices.
  • Support Qualcom QC 2.0/3.0, compatible with BC1.2 and Apple devices.
  • Maximum output 12V/2A.

Receiver signal test and protocol analysis

  • With standard 3 pin plug, BG-8S cab detect BEC output voltage.
  • BG-8S also support multiple protocol analysis including PWM, PPM&S.BUS and etc.
  • With future firmware upgrades more Protocol analysis will be supported.

 
Multiple measurement connections

  • Support XT60/XT60i, XH2.54 1-8s balance lead, XH2.54 3 pin, JST ETC to measure voltage.
  • Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurements.

Support USB upgrade, multilanguage options

  • BG-8S has Micro USB port, easily connect to PC to perform firmware upgrades.  

 
XT60i Meant for BattGo

  • BG-8S uses XT60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.

 
Package Included:
1x ISDT BG-8S Smart Battery Checker

€32.00

Inc. VAT
Quantity
iSDT PC-4860 1-8S LIPO Safe Parallel XT60 Plug Charging Board

iSDT PC-4860 1-8S LIPO Safe Parallel XT60 Plug Charging Board

iSDT PC-4860 1-8S LIPO Safe Parallel XT60 Plug Charging Board

Max Input Current: 40A
Max Output Current: 30A/Port
Max Balance Current: 2A
Size: 88 * 58 * 20 mm
Weight: 210 g
Balance Cells: 1-8S
Power Plug Type: XT60

€35.90

Inc. VAT
Quantity
ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

ISDT scLinker is an exclusive data cable for ISDT charger firmware upgrading,such as sc608,sc620.

Specification:

  • Brand: ISDT
  • Name: scLinker
  • Material: Aluminium alloy+rubber
  • Cable length: 30 cm

Upgrade Step:

  1. Visit the ISDT website https://www.isdt.co/scLinker.html to download the firmware.
  2. Connect to PC and power supply.
  3. Upgrade the firmware to your charger
  4. Wait for completion.

Package included:
1 x ISDT scLinker

€6.90

Inc. VAT
Quantity
JST XH 2-8S Balance Charger Expansion Adapter Board with cable

JST XH 2-8S Balance Charger Expansion Adapter Board with cable

This is the Multi- Adapter Balancing Board for  JST- XH (Gens ace, ALIGN, Optipower, and so..)
This adapter allows you to balance a 2S to 8S via one harness.

Great adapter when you have packs with different cell counts. Eliminates the need to purchase individual harnesses. works with most popular chargers / balancers only.
Plug only 1 battery in at a time during balancing

€5.00

Inc. VAT
Quantity
JST-XH Wire Extension 6S

JST-XH Wire Extension 6S

Your battery too close to the balancer? This is exactly  what you need!
This cable to be used with Lipo balancer, extention of 30cm, fit JST connectors such as Align, Optipower and others.

Fit batteries up to 6S

€4.00

Inc. VAT
Quantity
Lipo Balance extension 6S EH

Lipo Balance extension 6S EH

Your battery too close to the balancer? This is exactly  what you need!
This cable to be used with Lipo balancer, extention of 30cm, fit EX( Robbe, graupner, etc.. lipos)

Fit batteries up to 6S

€4.00

Inc. VAT
Quantity
Lipo balancer adaptor PQ 2-6 S battery

Lipo balancer adaptor PQ 2-6 S battery

Equalizer adaptor for battery packs , fits Packs with 2 ... 6 cells

For connecting LiPo batteries fitted with Polyquest Balance adaptor leads to EH Equalizers( such as robbe)

€4.00

Inc. VAT
Quantity
Multi All-in-One Balance Board TP Hyperion JST-XH EH

Multi All-in-One Balance Board TP Hyperion JST-XH EH

Description:

Multi All-in-One Balance Board TP Hyperion JST-XH EH

€5.50

Inc. VAT
Quantity
Revoelectrix MPA-to-Other Brand Charger Interconnect Cable

Revoelectrix MPA-to-Other Brand Charger Interconnect Cable

This special cable is required to interface the Revolectrix MPA or SPA to GT500, GT1200 and other brand, 8 cell chargers having XH compatible balance connectors.
The cable is 305mm long,  Made from silicone cable, and includes a JST XH on one end and a JST XH connector on the other end

€7.90

Inc. VAT
Quantity
Single-Port Safe Parallel Adapter for XH Compatible Battery Packs

Single-Port Safe Parallel Adapter for XH Compatible Battery Packs

SPA is a Signle-Port Safe Parallel Adapter for charging one pack at a time or safely interconnecting same-cell-count LiPO batteries in parallel via daisy-chaining.
This version supports LiPO batteries with JST XH compatible balance connectors and wiring.

SPA-XH uses the same interconnect cables as the MPA-XH.
These interconnect cables are available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
Be sure to purchase the proper cable to plug the SPA into your Charger or Battery Workstation.
Daisy-chain multiple SPA to parallel charge multiple packs using this cable.

The SPA includes a custom header. A single connector supports any cell count from 2s through 8s.

IMPORTANT: SPA-XH is a native XH adapter. It requires a charger capable of running XH WIRING MODE; e.g., Cellpro 10XP, PowerLab series, or other brands which support XH batteries directly.

€13.90

Inc. VAT
Quantity
Yuneec Q500 Rapid Multi Battery Parallel Charging Board

Yuneec Q500 Rapid Multi Battery Parallel Charging Board

4 Battery Charging Board Plate Multi Battery Parallel Charger for YUNEEC Q500 Quadcopter

For Yuneec Q500 Battery charging ONLY

Specifications:

  • Rapid Multi-battery charger plate
  • Support 4 batteries charge at same time!
  • Support Original charger and other charger adaptors
  • For protecting battery, do not exceed 5A per battery
  • To fully charge a battery will take about 50 minutes while the output is 4A.
     
  • Package includes:
  • 1x Battery Parallel Board
  • 1x Connector balance cable

€19.90

Inc. VAT
Quantity
BID-CHIP

BID-CHIP

discontinued product

€3.50

Inc. VAT
Charger DC cable Alligator 80amps 60cm long

Charger DC cable Alligator 80amps 60cm long

Hook up your Charger to a lead-acid battery or a large power supply with these heavy duty alligator clips.

Two feet (60CM) of 10 AWG wire give you plenty of flexibility to make your connection, and with clips rated for up to 80 amps, you can draw all the power you need for even the heaviest load. At the charger end of the cable, a female EC5 connector is ready to make an easy connection to your input cable. can fit other chargers with a chance of the end connector

Specifications:

    Input Connectors: Alligator Clips
    Output Connector: Female EC5
    Wire Type: 10 AWG Silicone
    Length: 24"

 

€11.90

Inc. VAT
Quantity
Deans Aluminium Housing

Deans Aluminium Housing

Housing for Deans (T-connector)

Charger, hold, Hide your deans into solid light Housing. Securing with M3 screw the connector for secure charger or battery connection.

Attachable to Airplane, Quad, Heli, Car and much more.

Set of 1. Red Anodized color

€7.00

Inc. VAT
Quantity
Male Deans-T to female XT60 adapter

Male Deans-T to female XT60 adapter

 Deans-T type male to XT60 female adapter.

This adapter is very helpful when you need to connect heterogeneous connectors

€2.00

Inc. VAT
Quantity
MT60 3.5mm 3 pole Soldering protected Motor connector set

MT60 3.5mm 3 pole Soldering protected Motor connector set

MT60 3.5mm 3-pin Motor connector set.

Made from high-temp Nylon and 3.5mm gold plated spring connectors.

Includes:

  • 1x male connector
  • 1x female connector
  • 2 x wire guiding sleeves

€2.50

Inc. VAT
Quantity
Parallel (6X) Walkera 1s charging cable

Parallel (6X) Walkera 1s charging cable

The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs Walkera, Hubsan.. 1s Lipo
Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Walkera, Hubsan 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

€8.50

Inc. VAT
Quantity
XT60 Serial Adaptor

XT60 Serial Adaptor

XT60 serial adapter.

This adapter is very helpful when you need to connect 2 batteries with XT60 connector in series.

€4.00

Inc. VAT
Quantity
XT90 Serial Adaptor

XT90 Serial Adaptor

XT90 serial adapter.

This adapter is very helpful when you need to connect 2 batteries with XT90 connector in series.

€7.00

Inc. VAT
Quantity
Micro Parallel Board - mCPX & nCPX

Micro Parallel Board - mCPX & nCPX

Micro Parallel Charging Board - Unlimited Flight at Your Fingertips. Safe Parallel Charge Board for mCPX & Pico

One of the best ways to extend your day of flying is multiple batteries, and with this Micro Parallel Charging Board, you can now charge up to (6) Ultra Micro Batteries, and (6) Nano CPX style batteries, allowing you to take flight times to new limits.

Compatible with UMX style batteries found in aircraft like the Blade mSR, and NCPX batteries found in aircraft like the Blade nCPX, this parallel board can charge up to (12) batteries at once, allowing you to spend more time flying, and far less time waiting for your batteries to charge. Further, this micro parallel board is protected by self resettable fuses to prevent shorts when charging batteries in parallel.

Specifications

  • Input Charge Connector: Male 4mm Banana Plug
  • Output Connector: 6x 1S Female JST-PH; 6x Female Pico
  • Wire Type: 18 AWG Silicone Charge Lead
  • Max Charge Rating: 1.5A per battery
  • Fuse Rating: 1.5A
  • Wire Length: 8"


When charging in parallel, it is best to be sure that the batteries being charged are close in overall voltage. Charging multiple batteries that are far out of balance with each other can limit the batteries potential and shorten battery life.

€7.00

Inc. VAT
Quantity
Multi-Port Safe Parallel Adapter for EC5 XH/EH/HR

Multi-Port Safe Parallel Adapter for EC5 XH/EH/HR

Working with big 6S packs? Cut the clutter and get the one board that's designed specifically for your application.

Designed from the ground-up with one purpose, this board is as straightforward as we could make it, with EC5 and 6S JST-XH connectors for up to four packs in parallel. With fuse protection on both the main and balance connections, you can rest easy knowing that all your gear is protected from any short circuits. 40A blade fuses on the main circuits are easily replaceable if needed, while the balance circuits have self-resetting poly-fuses built into the board.

With both main and balance cables included to connect to whatever charger you're using, this is a true plug-and-play solution.

€49.00

Inc. VAT
Quantity
Safe 35A Parallel Charge Board for 4 Packs 2-8S XT60 connector

Safe 35A Parallel Charge Board for 4 Packs 2-8S XT60 connector

MPA is a Multi-Port Safe Parallel Module for safely interconnecting up to 4 Lipos with same-cell-count batteries in parallel
 

  • Balance Output Cable: 18AWG silicon cable
  • Current: Support MAX. 35A charge current
  • Support up to 4 packs 2S-8S balance charge.

Features:

  • Supports up to four packs of the same type, same cells 2-8S battery pack.
  • Balanced port output line with 18AWG multi-strand silicone line.
  • Equipped with safety protection
  • High-quality gold-plated connectors.
  • Thicken PCB copper foil, allow security using 35A charging current
  • Equipped with 40A fuse between any two groups of batteries, to prevent line burned due to the large battery pressure.

Package Included:
1x Parallel Charging Board

€35.00

Inc. VAT
Quantity
Safe 40A Parallel Charge Board for 6 Packs 2-8S XT60 connector

Safe 40A Parallel Charge Board for 6 Packs 2-8S XT60 connector

MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
 
Spcifications:
support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s);
supports 40A max charge/discharge rate;
every port reverse polarity fuse protection of main battery wires;
every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators;
supports non-balanced charge of up to two 1s LiPos used with "indoor models";
supports 1 RX and 1 TX NiCd/NiMH battery pack
Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring.
 
Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.

€56.00

Inc. VAT
Quantity