Multicopter Tuning & Upgrades

Page of 3
Kylin CNC aluminium Motor mount set 37mm, Silver Demounted from Machine

Kylin CNC aluminium Motor mount set 37mm, Silver Demounted from Machine

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

this model is demounted from model, its brand new, but some signs of screws from the inside.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

  • 2 Half Arms, Made from CNC aluminum,
  • Screws

€35.00

Inc. VAT
Quantity
40CH Raceband AVTransmitter With Pigtail Antenna For FPV Multicopter 25mW

40CH Raceband AVTransmitter With Pigtail Antenna For FPV Multicopter 25mW

This is the size and weight savings, while still obtaining good performance.
The FX795T-2 support full range of 40 channels and only weighs 7.5g.
It’s perfect for a wide range of FPV racing aircraft, especially small FPV racing models and FPV racing multicoptors.

€25.00

Inc. VAT
Quantity
ABS 3.2x7mm Round Standoff Non-threaded Spacer thick 3,5,6,8mm 10pcs

ABS 3.2x7mm Round Standoff Non-threaded Spacer thick 3,5,6,8mm 10pcs

ABS M3 Round Standoff , Non-threaded Spacer 3,5,6,8mm

made for M3 screws, non threaded , size is 3.2mm(ID), 7mm(OD)

Set of 10 pcs

Sizes avaliable( THICKNESS/HEIGHT)

3/5/6/8mm long

 

€2.00

Inc. VAT
Quantity
ABS Spacer for Sky hero tuning

ABS Spacer for Sky hero tuning

This is the ABS material Spacer for Sky hero machines. it is higher (40mm) and usually used with Clamp (avclamp) as a set.

1 Spacer is in the set

€6.90

Inc. VAT
Quantity
Anti-vibration Ball Dual-Head for Gimbal

Anti-vibration Ball Dual-Head for Gimbal

Dual-head anti-vibration rubber ball, widely used in gimbals connection and FPV system

 

  • Hardness: 35 degree
  • Height: 21mm
  • Inner bore diameter: 8mm
  • Included: 4pcs in set

 

€4.00

Inc. VAT
Quantity
AntiSlip VELCRO Lock Strap for Large Applications 620x50mm 2pcs

AntiSlip VELCRO Lock Strap for Large Applications 620x50mm 2pcs

Theis is the new Lock Strap feature a Patented anti slip material in the inside surface that securely locks your battery in place and prevents them from slipping, during extreme maneuvers. This strap is made for large applications, e.g lipos of 16000mah and over. also possible to attach 2 lipos in this size with one strap.

Those straps are made from heavy duty nylon, with special antislip material, stiched with Kevlar wire for strongest application possible and heavy loads of up to 8g forces.
use on large UAV, Multicopters and more.

Strap measures  620 mm long and 50mm wide, so they will also catch lipos from 6-12000mah without any problem.

Each package contains 2 Velcro straps

Straps coming with Plastic or Metal buckle.

€11.00

Inc. VAT
Quantity
AntiSlip VELCRO Lock Strap XL

AntiSlip VELCRO Lock Strap XL

The new XL Lock Straps feature a Patented anti slip material in the inside surface that securely locks your battery in place and prevents them from slipping, during extreme maneuvers.
These large size straps are made from heavy duty nylon Velcro material and perfect for 500 to 800 class electric helicopters or larger RC Aircraft.

Strap measures 25 X 450 mm, so they will also catch lipos from 6-8S 5000-8000mah without any problem.
Each package contains 3 Velcro straps

€5.00

Inc. VAT
Quantity
Body clips medium size (10 pcs)

Body clips medium size (10 pcs)

Body clips

  • 10 pieces in one set
  • Medium size

€4.50

Inc. VAT
Quantity
Body clips Small size fit 1:10 scale, Metal green color (10 pcs)

Body clips Small size fit 1:10 scale, Metal green color (10 pcs)

Body clips

  • 10 pieces in one set
  • small size

€4.50

Inc. VAT
Quantity
Carbon Fiber electronic retractable landing gear for DJI Phantom

Carbon Fiber electronic retractable landing gear for DJI Phantom

Carbon Fiber electronic retractable landing gear for DJI Phantom

Product Description:

  • Simple structure, easy to assemble
  • No serious vibration during flight
  • Applicable to DJI Phantom, F550. and other multi-copters.
  • Please use a separate radio when use this product with Phantom because Phantom's transmitter does not have spare channel to control the retractable landing gear.
  • Weight: 190G
  • Working Voltage: 4.6-7.2V

Note:
DO NOT connect to the flight controller directly. It will cause damage to the flight controller.

€49.90

Inc. VAT
Quantity
CNC Aluminium Folding Arm Joint Fitting for D30mm Tube W/Up-tilt angle (Black)

CNC Aluminium Folding Arm Joint Fitting for D30mm Tube W/Up-tilt angle (Black)

Make your drone with retractable Arms.D30 CNC Aluminium Folding Arm Joint Fitting (suit for D30mm Tube) W/ up-tilt angle - Auto Edition (Black) V2.

Specification:

  • Suitable for 30mm Tube
  • 5 degree dip angle to help to enhance stability
  • Spring Type Automatic, ease and simple to use!
  • DIY necessary! suitable for Quadcopter/Hexacopter/Octacopter
  • Material: aluminum alloy
  • Color: Black
  • Weight: 116 g

€59.90

Inc. VAT
Quantity
CNC metal Carbon Arm Multicopter 45cm for single or double motor

CNC metal Carbon Arm Multicopter 45cm for single or double motor

This is the newest arm for DIY multicopters.

Best Arm in terms of quality, made 100% in Europe from 6061 Aluminium, the tube itself is made from Carbon. The inserts fits and secures the arm, which allows the part to be solid as rock. The base insert (the part which connecting to the quad), allows the arm to be easily retracted. The motor mount with its very unique design, allows single or double coaxial motor mounting with a special reinforced cnc part inside.

This unit was tested with over 30kg of force for a long time, to show how strong it is.

Specifications:

  • Tube length: 45cm (can be shortened if needed)

Set includes:

  • 1 Tube
  • 1 Base insert
  • 2 Motor mounts
  • 1 Insert
  • Hardware

€89.00

Inc. VAT
Quantity
Collapsible folding GPS Antenna Mount without stand

Collapsible folding GPS Antenna Mount without stand

Collapsible folding GPS Antenna Mount without stand

  •   Collapsible design
  •   Compatible with 4mm GPS antenna mount.
  •   T6 aluminum
  •   Weight only 4gr
  •   Silver color

€9.00

Inc. VAT
Quantity
Direction Indicator for Rhino-X

€17.00

Inc. VAT
Quantity
DJI Zenmuse Z15 Rubber Damper black, fits also other models

DJI Zenmuse Z15 Rubber Damper black, fits also other models

This is a replacement DJI Innovations Part 15Damping Rubber Set. These are used to absorb vibration. Package includes four black hard density dampers.

€4.00

Inc. VAT
Dome 580

Dome 580

Large ROUND Dome , plastic reinforced with carbon on the sides, for Multicopters, can be used on almost any machine from 550 mm.

€12.00

Inc. VAT
Quantity
eTURBINE Quadcopter Rear LED Ice Blue & controller

eTURBINE Quadcopter Rear LED Ice Blue & controller

eTURBINE Quadcopter Rear LED Ice Blue & controller

140mm long, however can be used for Any machine.

Controller allows 8 different modes of Light, the LED is in Ice Blue color. Providing Excellent visibility at any time of the day.

€16.90

Inc. VAT
Quantity
FPV multicopter quad Foam Landing Pads (FEETS)

FPV multicopter quad Foam Landing Pads (FEETS)

3m branded foam landing feets in a pack of 4 pieces. perfect to protect your mini quad.

Set including 4 pcs

Colors: Black, Brown ,Orange

€2.85

Inc. VAT
Quantity
Frame for Rhino-X ( BLACK )

€60.00

Inc. VAT
Quantity
GPS Black Cover Case Shell  Neo6m 6H MTK Ublox

GPS Black Cover Case Shell Neo6m 6H MTK Ublox

Black Cover Case Shell for GPS Antenna Neo6m 6H MTK Ublox

Perfect for Open source Self kits as MultiWii/Ardu pilot, etc.

€8.00

Inc. VAT
Quantity
High Fluorescent sticker (2 pcs)

High Fluorescent sticker (2 pcs)

Special High visibility Fluorescent stickers perfect for applications of drones, where the visibility of front/back is important.  (2 pcs)
Available in a Fluorescent yellow or Orange.
Size: 30x12cm

€3.00

Inc. VAT
Quantity
HML650 Retractable Landing Gear for multicopters

HML650 Retractable Landing Gear for multicopters

HML650 Retractable Landing Gear. The retractable landing gear is designed for the multicopter Frame in order to provide a better perspective inaerial-filming / photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible.

Feature:

  • Weight: 224g
  • Power support: DC 3S-6S 12V-22V
  • Suitable for QuadcopterHexacopterOctocopter ,Wheelbase less than 700mm

Tips:
If the switch channel on the TX has fail-safe function, set the fail-safe value to [Lower] position, so that the landing gear will be in [Lower] status when the receiver enters fail-safe, to land the aircraft safely.To avoid false switch triggering, you can use the
slide lever or other trim as the landing gear’s control switch.

Disclaimer & Warning:
Please strictly follow the manual to assemble and use the retractable landing gear. As We have no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. We accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product.

€69.90

Inc. VAT
Quantity
Intelligent Navigation LED Light for Fixed/ FPV Racing quadcopter

Intelligent Navigation LED Light for Fixed/ FPV Racing quadcopter

This navigation light is widely used and can be used in any model of sea and land using PWM signal.
 
2. This navigation lamp can be used for racing quad footpad, perfect in place of sponge MATS, with special materials, anti-cracking and toughness. Please treat customers differently. Because of the design of the divergent lamp shade, the player can feel the attitude of flight in multiple angles.

3. there are six functions to choose from, convenient and practical.
 
4. When operating model equipment, the light of the associated rudder will be activated when the control is not affected.
 
5. The equipment supports 2-6s voltage input.
 
6. The navigation lamp control panel is 12V version (imported 3W high brightness light bead).
 
7. This product can automatically identify remote neutral point location. In case of abnormal situation, first check whether the remote control is neutral, then please restart the device without power.
 
8. With the BB sound finder function, the customer needs to cut the buzzer mouth by itself

€39.00

Inc. VAT
Quantity
Kylin CNC aluminium Motor mount set 37mm, RED

Kylin CNC aluminium Motor mount set 37mm, RED

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

  • 2 Half Arms, Made from CNC aluminum,
  • Screws

€42.00

Inc. VAT
Quantity
Kylin CNC aluminium Motor mount set 37mm, Silver

Kylin CNC aluminium Motor mount set 37mm, Silver

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

  • 2 Half Arms, Made from CNC aluminum,
  • Screws

€42.00

Inc. VAT
Quantity
Kylin CNC aluminium Motor mount set 55mm, Silver

Kylin CNC aluminium Motor mount set 55mm, Silver

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

Fit motors up to 55mm in diameter.
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

  • 2 Half Arms, Made from CNC aluminum,
  • Screws

€53.00

Inc. VAT
Quantity
Landing Gear Foam Protection Set For DJI Phantom RC Quadcopter

Landing Gear Foam Protection Set For DJI Phantom RC Quadcopter

Provide protection for DJI Phantom landing gear
Features:

  • Super light weight less than 0.1G
  • Landing Gear Protective Set
  • Come with inside 3M sticker
  • Dedicated for DJI Phantom RC Quadcopter

€4.50

Inc. VAT
Quantity
Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

€4.00

Inc. VAT
Quantity
M3 Nylon Black Spacers/ Screw /Nut /Hex M-F Stand off 180pcs Assorted Kit Box

M3 Nylon Black Spacers/ Screw /Nut /Hex M-F Stand off 180pcs Assorted Kit Box

M3 Nylon Black Spacers, Screw, Nut, Hex M-F Stand off 180 pcs Assorted Kit Box

Type specification complete, the quality is reliable.
Never rust, beautiful,practical, durable and convenient for using.
Packed in a plastic box, good for storage and difficult to be damaged.
Nylon has the characteristics of insulativity,Non-Magnetic,thermal insulation,corrosion resistance and etc.

Specification:

  • Material: Nylon
  • Color: Black
  • Quantity: 180pcs
  • Stand-off Length: 6 ~ 20mm (not include male end thread length)
  • Male end thread length: 6mm
  • Screw Length: 6mm (not include top head)
  • Thread: M3 (3mm)
  • Thread pitch: 0.5mm

Accessories total of 180 pcs:
Type  :   Length(Size)   :  Quantity
M3x20mm Spacers / 20mm+6mm x 10
M3x15mm Spacers  / 15mm+6mm x 10
M3x12mm Spacers / 10mm+6mm x 10
M3x10mm Spacers / 10mm+6mm x 10
M3x8mm Spacers  / 10mm+6mm x 10
M3x6mm Spacers   /  6mm+6mm  x 10
M3x6mm Screw    /  8mm x 60
M3 Nut /2mm x 60

€9.00

Inc. VAT
Quantity
M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener (10 pcs)

M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener (10 pcs)

M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener

Set includes 10 pcs

€2.00

Inc. VAT
Quantity
M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

Set includes 10 pcs

€2.00

Inc. VAT
Quantity
M3x10mm Female-Male Standoff (4pcs)

M3x10mm Female-Male Standoff (4pcs)

M3 x 10mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

€2.00

Inc. VAT
Quantity
M3x15mm Female-Male Standoff (4pcs)

M3x15mm Female-Male Standoff (4pcs)

M3 x 15mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

€2.00

Inc. VAT
Quantity
M3x5mm Female-Male Standoff (4pcs)

M3x5mm Female-Male Standoff (4pcs)

M3 x 5mm Nylon Hexagonal Female / Male Standoff Spacer

Set of 4pcs

Available in white color only.

€2.00

Inc. VAT
Quantity
Multi copter Landing gear 250mm

Multi copter Landing gear 250mm

Foldable LANDING gear, made from Carbon, comes with special attachment for Camera mount

Height, 250mm

€99.00

Inc. VAT
Quantity
Multi copter Landing gear 300mm

Multi copter Landing gear 300mm

Foldable LANDING gear, made from Carbon, comes with special attachment for Camera mount

Height, 300mm

€139.00

Inc. VAT
Quantity
Page of 3