Futaba S-BUS

Futaba S.Bus System - Revolutionary, cutting-edge technology, allow you to put many channels on same cable of 3 wires.
Secure, and excellent solution for any aircraft, especially with many long wires.

Futaba 4-Way S.Bus Servo Terminal Box Connector Hub Block

Futaba 4-Way S.Bus Servo Terminal Box Connector Hub Block

Futaba 4-Way S.Bus Servo Terminal Box Connector Hub Block

€9.90

Inc. VAT
Quantity
Futaba HUB-3 Lead 0.5mm 1200mm

Futaba HUB-3 Lead 0.5mm 1200mm

3-way S-BUS distribution system with heavy-duty Futaba-plugs.

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
A HUB-3 lead will be plugged directly into the S-BUS receiver output.
From this 3-way node, the HUB-2 or HUB-3 leads will create the S-BUS-connections to both wing panels and also to the tail, namely, elevator and rudder.
The HUB-3-leads are available in lengths ranging from 30…120 cm.
The power supply is made via the receiver connection using a switch harness 6 A No. 8891 as well as ready-made NiMH- and LiPo-receiver battery packs.

€22.00

Inc. VAT
Quantity
Futaba HUB-3 Lead 0.5mm 500mm

Futaba HUB-3 Lead 0.5mm 500mm

3-way S-BUS distribution system with heavy-duty Futaba-plugs.

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
A HUB-3 lead will be plugged directly into the S-BUS receiver output.
From this 3-way node, the HUB-2 or HUB-3 leads will create the S-BUS-connections to both wing panels and also to the tail, namely, elevator and rudder.
The HUB-3-leads are available in lengths ranging from 30…120 cm.
The power supply is made via the receiver connection using a switch harness 6 A No. 8891 as well as ready-made NiMH- and LiPo-receiver battery packs.

€14.00

Inc. VAT
Quantity
Futaba HUB-3 Lead 0.5mm 800mm

Futaba HUB-3 Lead 0.5mm 800mm

3-way S-BUS distribution system with heavy-duty Futaba-plugs.

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
A HUB-3 lead will be plugged directly into the S-BUS receiver output.
From this 3-way node, the HUB-2 or HUB-3 leads will create the S-BUS-connections to both wing panels and also to the tail, namely, elevator and rudder.
The HUB-3-leads are available in lengths ranging from 30…120 cm.
The power supply is made via the receiver connection using a switch harness 6 A No. 8891 as well as ready-made NiMH- and LiPo-receiver battery packs.

€19.00

Inc. VAT
Quantity
Futaba S-BUS Adapter cable 30 cm, 1mm

Futaba S-BUS Adapter cable 30 cm, 1mm

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

€11.00

Inc. VAT
Quantity
Futaba S-BUS Adapter cable 50 cm, 1mm

Futaba S-BUS Adapter cable 50 cm, 1mm

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

€13.00

Inc. VAT
Quantity
Futaba S.BUS Adaptor Plug 30cm 0.25mm wire

Futaba S.BUS Adaptor Plug 30cm 0.25mm wire

Futaba S.BUS Adaptor Plug

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

€9.90

Inc. VAT
Quantity
Futaba S.BUS Adaptor Socket

Futaba S.BUS Adaptor Socket

S.BUS Adaptor Socket

Servo lead with fixed socket- Futaba socket for universal usage For example, as a charge socket or wing connector plug for aircraft models, or elevator connector for large models, as well as S.BUS wing connector, etc.

  • Lead length approx. 25 cm.

€9.90

Inc. VAT
Quantity
Futaba S.BUS Connector Lead 1mm2 30cm

Futaba S.BUS Connector Lead 1mm2 30cm

Futaba S.BUS Connector Lead 1mm2 30cm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.

€12.00

Inc. VAT
Quantity
Futaba S.BUS HUB-2 Lead 0.5mm 100mm

Futaba S.BUS HUB-2 Lead 0.5mm 100mm

Futaba S.BUS HUB-2 Lead 0.5mm 100mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
The HUB-2-leads are available in lengths from 10…120 cm.
Which also may be used as inexpensive and heavy-duty Y-leads for standard PWM-servos and speed controllers.
The heavy-duty switch harness 6 A (12 A) No. 8891, as well as ready-made NiMH- and LiPo-receiver battery packs are suitable and available for this Futaba high-current wiring system.

€11.00

Inc. VAT
Futaba S.BUS HUB-2 Lead 0.5mm 1200mm

Futaba S.BUS HUB-2 Lead 0.5mm 1200mm

Futaba S.BUS HUB-2 Lead 0.5mm 1200mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
The HUB-2-leads are available in lengths from 10…120 cm.
Which also may be used as inexpensive and heavy-duty Y-leads for standard PWM-servos and speed controllers.
The heavy-duty switch harness 6 A (12 A) No. 8891, as well as ready-made NiMH- and LiPo-receiver battery packs are suitable and available for this Futaba high-current wiring system.

€8.50

Inc. VAT
Quantity
Futaba S.BUS HUB-2 Lead 0.5mm 300mm

Futaba S.BUS HUB-2 Lead 0.5mm 300mm

Futaba S.BUS HUB-2 Lead 0.5mm 300mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
 

 

€6.00

Inc. VAT
Quantity
Futaba S.BUS HUB-2 Lead 0.5mm 500mm

Futaba S.BUS HUB-2 Lead 0.5mm 500mm

Futaba S.BUS HUB-2 Lead 0.5mm 500mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
The HUB-2-leads are available in lengths from 10…120 cm.
Which also may be used as inexpensive and heavy-duty Y-leads for standard PWM-servos and speed controllers.
The heavy-duty switch harness 6 A (12 A) No. 8891, as well as ready-made NiMH- and LiPo-receiver battery packs are suitable and available for this Futaba high-current wiring system.

€6.90

Inc. VAT
Quantity
Futaba S.BUS HUB-2 Lead 0.5mm 800mm

Futaba S.BUS HUB-2 Lead 0.5mm 800mm

Futaba S.BUS HUB-2 Lead 0.5mm 800mm

The aerospace proven gold contact connectors result in a small and light plug connection and provide 6 A continuous (12A intermittent), more than sufficient current carrying capacity for the majority of models.
The HUB-2-leads are available in lengths from 10…120 cm.
Which also may be used as inexpensive and heavy-duty Y-leads for standard PWM-servos and speed controllers.
The heavy-duty switch harness 6 A (12 A) No. 8891, as well as ready-made NiMH- and LiPo-receiver battery packs are suitable and available for this Futaba high-current wiring system.

€7.50

Inc. VAT
Quantity
PSS Charger 2S-750mA-EQ

PSS Charger 2S-750mA-EQ

Using 2 chargers, both batteries in the PSS battery backer can be simulatneously charged from 230 Volt mains.
The battery wiring does NOT need to be separated. The integrated Equalizer automatically sets the cell voltage when charging.

€57.00

Inc. VAT
Quantity
PSS S-BUS Clamp

PSS S-BUS Clamp

S-BUS-Terminal block for PSS-battery backer.

Core element of the S-BUS system is the cable terminal block.
An S_BUS servo can be installed at any convenient point along the length of the cable.
Simply feed the cable between the upper and lower halves of the terminal block, press the two halves together to close the housing and lock the cable in position.
The clamped terminal creates a reliable power and signal connection to the PSS- battery backer and receiver.
Allocate the servo its relevant channel address, and the servo connection is done!

€16.70

Inc. VAT
Quantity
PSS S-BUS Clamp with PWM adaptor

PSS S-BUS Clamp with PWM adaptor

S-BUS-Terminal block with PWM-converter for PSS-battery backer.

This S-BUS terminal block serves to connect normal analogue- and also digital servos with PWM control. The terminal block has an additional printed circuit board which converts the S-BUS signal to a PWM one.
Hence a standard servo can be connected at any required point along the BUS cable. The PWM adapter neds to be configured with the channel address with this connection and the servo connection is done.
The channel allocation is made with the handy S-BUS programmer SBC-1.

€39.00

Inc. VAT
Quantity
PWM-S.BUS Converter SBE-1

PWM-S.BUS Converter SBE-1

The SBE-1 unit is a converter which converts the PWM signals in a normal receiver S.BUS signal.

This makes it possible S.BUS devices, such as the gyro CGY 750, etc., which have only one S.BUS input to connect to existing receiver with PWM output.
Up to 10 PWM channels into a S.BUS signal to be converted.

Specifications
Weight: 15g Dimensions: 23.5 x 33.5 x 9.5 mm cell count: 4 - 5 NC / NiMH o 2S LiFe / Lilo / LiPo

€75.00

Inc. VAT
Quantity
S-BUS - Futaba adapter plug

S-BUS - Futaba adapter plug

Adapter lead from USB-Adapter CIU2 to S-BUS wing plug connection.

To address and program the wing-mounted S-BUS servos.

€9.20

Inc. VAT
Quantity
S-BUS - Futaba adapter socket

S-BUS - Futaba adapter socket

Adapter lead from USB-Adapter CIU2 to S-BUS wing plug connection.

To address and program the wing-mounted S-BUS servos.

€9.20

Inc. VAT
Quantity
S-BUS HUB-3 cable,120Cm wire 0.5 qmm section,triple distribution

S-BUS HUB-3 cable,120Cm wire 0.5 qmm section,triple distribution

German produced, The gold plated contact plug-in connections tested in aviation technology result in a very small and light plug-in connection and nevertheless offer a total power supply sufficient for the majority of models with a duration of 6 A (12 A briefly).

From this triple distribution, the S-BUS connection to the two surfaces and to the stern, i.e. elevator and rudder, is established with HUB-2 or HUB-3 cables.

Cable is 120cm, but can be easily trimmed for shorter applications

€17.00

Inc. VAT
Quantity
S-BUS HUB-Kabel 1->3, 30 cm

S-BUS HUB-Kabel 1->3, 30 cm

HUB-lead to extend and distribute S-BUS-Servo connections. Extends the connection from 1 to 3 Servos.
Length 30 cm

€29.90

Inc. VAT
Quantity
S-BUS Programmer SBC-1

S-BUS Programmer SBC-1

Handy programmer to allocate the S-BUS channel numbers to S-BUS servos or S-BUS PWM adapters.

€32.00

Inc. VAT
Quantity
Futaba HPS-H700 S.bus 2 Brushless High-Voltage performance Helicopter Servo

Futaba HPS-H700 S.bus 2 Brushless High-Voltage performance Helicopter Servo

High Performance Servo with Brushless Motor (Neutral Pulse Width: Default 1520μs, optional 760μs) 

For all-purpose giant scale airplanes and Helicopters

FEATURES:

  • Suitable for all purpose RC helicopters.
  • Programmable/HV Brushless Servo.
  • Custom New high power Brushless Motor.
  • Programmable and compatible with S.Bus and S.Bus2 systems.
  • Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.
  • Upper/middle/bottom: Aluminum Case
  • 2S LiPo Suitable

SPEED:
0.075 sec/60°at 6.6V
0.07 sec/60° at 7.4V

TORQUE:
41.0 kgf/cm at 6.6V
569.4 ozf/in at 6.6V
44.0 kgf/cm at 7.4V
511.1 ozf/in at 7.4V

SIZE:
40.5 mm x 21 mm x 37.8 mm
1.59 in x 0.83 in x 1.49 in

WEIGHT:
76 g
2.68 oz

RATED VOLTAGE:
DC 6.0V-7.4V

OPERATING VOLTAGE:
DC 4.8-8.4V

NO DRY BATTERY OR BEC USE

€229.00

Inc. VAT
Quantity
Futaba HPS-HC700 S.bus 2 Brushless High Performance Servo with Brushless Motor 1520μs,optional 760μs

Futaba HPS-HC700 S.bus 2 Brushless High Performance Servo with Brushless Motor 1520μs,optional 760μs

FEATURES:

  • Suitable for all purpose RC helicopters.
  • Programmable/HV Brushless Servo.
  • Custom New high power Brushless Motor.
  • Programmable and compatible with S.Bus and S.Bus2 systems.
  • Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.
  • Upper/middle/bottom: Aluminum Case
  • 2S LiPo Suitable

SPEED:
0.08 sec/60°at 6.6V
0.075 sec/60° at 7.4V

TORQUE:
18.0 kgf/cm at 6.6V
250.0 ozf/in at 6.6V
20.0 kgf/cm at 7.4V
277.8 ozf/in at 7.4V

SIZE:
40.5 mm x 21 mm x 37.8 mm
1.59 in x 0.83 in x 1.49 in

WEIGHT:
73 g
2.57 oz

RATED VOLTAGE:
DC 6.0V-7.4V

OPERATING VOLTAGE:
DC 4.8-8.4V

NO DRY BATTERY USE

€234.00

Inc. VAT
Quantity
S-BUS Signal Inverter set

S-BUS Signal Inverter set

Get all channels through a single wire! This simple cable, allows you to connect an S.BUS enabled receiver to a Naze or other Flight Controllers.  It allows you to use the 3 Channel S.BUS enabled Rx or a Futaba S.BUS receiver with full-range dual antennas and make use of 14 Channels!  This, in turn, opens up Motor outputs M7-M10 on the Naze receiver headers allowing Octo configurations.

The cable is inserted between the receiver's S.BUS output and the Naze Flight controller receiver input power+- and signal to channel 4 to inverts the S.BUS signal.

€8.00

Inc. VAT