Soldering Tools

Adjustable Digital Soldering Station Esd 48W With Accessories

The ZD 931 Soldering Station is ideal for hobby electronics, school, workshop, service and labor.
Heat Settings are using the up/down button in 1 ° and 5 °C increments.
The soldering iron is connected using the 5 pin connector on the docking station.
With Soldering Iron Stand and viscose cleaning sponge in the drawer/Compact, robust and protective insulation housing/Station and COB HOLDERS Getrennt position/Rapid switching the soldering tip
Large LCD display with and is value/Temperature Control with electronic sensor/Quick heating time thanks to generously dimensioned power supply; high-performance 48 W SOLDERING IRON FOR A WIDE RANGE OF USES
Temperature Range from 145 and 450 °C/Optical and acoustic error message at malfunction/Surge Protection

Technical Data:

• Operating Voltage: 230 V (220 – 240 V), 50 Hz
• Soldering Iron Power: 48 W
• Device mains fuse: T 1 A/250 V
• 150 °C – 450 °C Temperature Range in 1 °C increments
• Display precision: 5%
• LC Display with the 3 1/2 Points
• Max. Power consumption: approx. Power
• Average Service Life of the heating element in soldering iron: approx. 500 hours
• Cable Length Between piston and plug: 1100 mm
• Dimensions (W x H x D): 185X100X150 MM
• Weight: Approx. 2.0 kg

Box Contents:

• Soldering Station ZD 931 with soldering iron holder and drawer with cleaning sponge
• Helping Hand with Magnifying Glass
• DESOLDERING PUMP
• Solder Wire, 1 mm, 10g in dispenser
• 2x Brush/Scraper 

Aluminum Multi-function Universal Soldering Station Insulation

Fits XT60/XT90/DEANS/Banana GOLD from 2.4 to 10.4mm

Specifications:

• Color: Red
• Length of Screws: 24mm
• Weight: 132g
• Screws: 5.3g

Dry sponge made of wire nash for ERSA tool holder

Specification:
 

• Weight (g)   0,1

ERSA Extra Long-life soldering chisel-shaped tip 5.00mm with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   5.00
• Interior diameter of the shaft (mm):   6,6
• Exterior diameter of the shaft (mm):   8,5
• Total length (mm)   46,00
• Weight (g)   0,015

ERSA  professional soldering set, gas power, infinitely variable up to 75 W.
Comfortable piezo ignition. Operated with lighter gas.

Mobile power - wherever you may need it! Efficient,with a wide range of high quality accessories,
small, handy and a convenient packaging: this gas soldering set is very versatile! The ergonomic antistatic gas soldering iron with piezo ignition is the perfect tool for service and maintenance work - especially when there is no electric power supply available.
With its infinitely variable power rating from 15 up to 75 watts (compared with electrical soldering irons) max. soldering tip temperatures of 500°C can be achieved. The Independent 75 operates on commercially available butane lighter gas.
The Independent 75 „Basic Set“ is supplied in a practical transport case, consisting of a gas soldering iron with pre-installed catalytic soldering tip, a spare tip and a sponge container with cleaning sponge

In addition to the „Basic Set“, the Independent 75 „Profi Set“ includes another 2 soldering tips suitable for virtually every soldering application.
A hot blade to shape and cut high-resistance foam, a hot gas nozzle, a deflector to shrink heat-shrinkable sleeves and to solder SMD components as well as a flame nozzle to microweld complete the equipment and open up many different applications

Technical data:
Rating:15 - 75 W
Heating time: 183°C in appr. 30 sec.
Temperatures: soldering tip: appr. 500°C max.
flame nozzle: appr. 1,200° - 1,400°C
hot air nozzle: appr. 700°C
Weight:73 g
Ignition:piezo ignition, operates on butane gas
 

ERSA i-Tip Long-life soldering angled face tip 1.5mm with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT

Specification:

• Coating   long-life tip
• Shape of soldering tip:   angled face
• Soldering tip diameter / width (mm)   1,50
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA i-Tip Long-life soldering angled face tip 2mm with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station

Specification:

• Coating   long-life tip
• Shape of soldering tip:   angled face
• Soldering tip diameter / width (mm)   2,00
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA i-Tip Long-life soldering chisel-shaped 1.20mm tip with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   1,20
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA i-Tip Long-life soldering chisel-shaped tip 1.8mm with ERSADUR-LF coating for i-Tool sodlering iron (0100CDJ) for i-CON soldering station - version:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   1,80
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   35,00
• Weight (g)   0,003

ERSA i-Tip Long-life soldering chisel-shaped tip 3.2mm with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   3,20
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA i-Tip Long-life soldering pencil point tip 0,20mm with ERSADUR-LF coating for i-Tool soldering iron for i-CON soldering station

Specification:

• Coating   long-life tip
• Shape of soldering tip:   pencil point
• Soldering tip diameter / width (mm)   0,20
• Interior diameter of the shaft (mm):   3,5
• Exterior diameter of the shaft (mm):   5,2
• Total length (mm)   30,50
• Weight (g)   0,003

ERSA Long-life soldering chisel-shaped 1.6mm tip with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   1,60
• Interior diameter of the shaft (mm):   6,60
• Exterior diameter of the shaft (mm):   8,50
• Total length (mm)   46,00
• Weight (g)   0,007

ERSA Long-life soldering chisel-shaped 2.2mm tip with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   2,20
• Interior diameter of the shaft (mm):   6,60
• Exterior diameter of the shaft (mm):   8,50
• Total length (mm)   55,00
• Weight (g)   0,093

ERSA Long-life soldering chisel-shaped tip 3.20mm with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   chisel-shaped
• Soldering tip diameter / width (mm)   3,20
• Interior diameter of the shaft (mm):   6,6
• Exterior diameter of the shaft (mm):   8,5
• Total length (mm)   46,00
• Weight (g)   0,012

ERSA Long-life soldering pencil point 0,40mm tip with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   pencil point
• Soldering tip diameter / width (mm)   0,40
• Interior diameter of the shaft (mm):   6,6
• Exterior diameter of the shaft (mm):   8,5
• Total length (mm)   55,00
• Weight (g)   0,012

ERSA Long-life soldering pencil point 1.00mm tip with ERSADUR coating for the following soldering stations:

ANALOG 60 (0ANA60), ANALOG 60 A (0ANA60A), ANALOG 80 (0ANA80), ANALOG 80 A (0ANA80A), DIGITAL 80 A (0DIG80A), DIGITAL 2000 A version with Power tool soldering iron (0DIG20A84), Multi-Pro (0930CD), Multi-Sprint (0960ED), Multi-TC (0760CD), RDS 80 (0RDS80), MICRO-CON 60 iA (0MIC60IA) with Power tool soldering iron (0840CDJ), TWIN 80 A (0TW80A) with Ergo tool soldering iron (0680CDJ), ELS 8000 (0ELS80000C, 0ELS8000MC, 0ELS8000DC), and for the following soldering stations that are out of stock: MS 6000 (0MS6000), MS 8000 (0MS8000), and MS 8000 D (0MS8000D).

Specification:

• Coating   long-life tip
• Shape of soldering tip:   pencil point
• Soldering tip diameter / width (mm)   1,00
• Interior diameter of the shaft (mm):   6,6
• Exterior diameter of the shaft (mm):   8,5
• Total length (mm)   46,00
• Weight (g)   0,010

ERSA Permanent soldering chisel tip 0.4mm with coating ERSADUR-LF for i-Tool soldering iron for i-CON soldering station:
0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT.

ERSADUR SOLDERING BITS are created for continuous operation and high Quaility.
In a special procedure they are plated on galvanic way with an iron layer and are protected by an additional chrome layer before corrosion and oxidation.
Perfect warm transfer protects the radiator of the soldering iron against overheating and premature wear. ERSA offers an extensive program in Löt-and Entlötspitzen for i tool ERSA, i tool Pico and i tool Nano (Ersa i-Con soldering stations).
   

• Tip type for sold. irons with heating element    
• Tip shape    chisel    
• Tip dimensions    0.4mm    
• Applications of soldering equipment:
• for ERSA-0100CDJ soldering iron
• for ERSA-I-CON2 station
• for ERSA-I-CONPICO station
• Gross weight: 2.46 g

Solder station i-CON 1: Innovative solution for intelligent hand soldering.

Ersa has succeeded in designing one of the smallest, lightest and most powerful soldering irons in the world - the Ersa i-TOOL. The true value added for our customers lies not only in the fact that it will increase both the hand soldering quality and productivity, but also that it can realize a tremendous reduction in operational costs associated with manual soldering. Ersa´s new patent pending technology allows for a similar performance as compared to the soldering irons with expensive heating cartridge tips, but offers a standard low-cost, long-life exchangeable tip! The Ersa i-CON advanced digital power supply offers Ersa´s new "One Touch" easy-to-use operation with the new i-Op Control, as well numerous value added functions.
  
i-CON Specs
 

• Power rating (Watt): 80
• Supply (Volt) :230
• Secondary voltage (Volt): 24
• Temperature range (in °C) :150 - 450
• Preheating time (in seconds) :9
• Design Soldering Tips: long-life tip
• Antistatic design (yes / no) :yes
• Digital display (yes / no): yes
• Station Weight (g) :3,000

Digital soldering station with microprocessor control
ERSA RESISTRONIC temperature control
High initial power and fast heating
Very high heat output
High efficiency through internally heated Lotspitzen
Ergonomic soldering iron grip
Set the temperature between 150 ° C and 450 ° C
Programming of three fixed temperatures or two fixed temperatures with a standby temperature
Bar graph display, calibration and a power-off function


Soldering station Specifications

• Supply voltage: 230V / 50Hz
• Secondary voltage:24V AC
• Power:80W
• Control technology:ERSA RESISTRONIC
• Temperature range, infinitely variable:150 ... 459 ° C
• Control:LCD Display
• Lead:2m PVC
• Irons RT80
• Voltage:24V AC
• Power: 80W at 350 ° C
• Heating power:290W
• Heating time, approx .:40s at 20 ° C
• Soldering iron tip:842CD
• Weight (without cable), approxl:130g
• Lead:1.5 m, PVC

ERSA strong Tip-Reactivator

Soldering bits Re-Activator, unleaded, 30gr. Box, to the cleaning and reactivation of very oxidized or passive soldering bits.
Cleaning without abrasive.

Specification:
 

• Weight (g)   30

ERSA Tip Exchanger\n\nThis ESD-safe tool allows for quick and reliable replacement of all internally heated ERSA soldering tips and the 422-type desoldering inserts.
It incorporates an additional side cutter and screw driver allowing the multi-purpose use of this versatile tool.\n

• Weight (g)   0,076

ERSA Tip-Reactivator

Special cleaning chemical for removal of oxidation on solder tips.

Specification:

• Weight (g)   15

ERSA Viscose cleaning sponge 55 mm x 55 mm for tool holders 0A09, 0A10, 0A13, 0A16, 0A24, 0A25, 0A28, 0A29, 0A30, 0A34, 0A35, 0A36, 0A39, 0A41, 0A42, 0A43, 0A44 and 0A45

Specification:

• Weight (g) 0,004
• Number of layers 2

Temperature controlled solder Station , ESD-safe, with digital display of target- and actual temperature, including soldering iron with tip, iron holder and sponge in drawer.
The soldering station  is ideal for hobby, school, workshop, service and lab. The adjustment of temperature is easy with the up-/down-button in 1° and 5°C-steps. The soldering iron will be connected with a 5 poles socket to the station.
 

•   With iron holder and sponge in a drawer.
•   Compact, stable and insulated housing.
•   Station and iron holder can be placed separately.
•   Fast and easy replacement of soldering tip
•   Large LC-display with target- and actual value of temperature.
•   Temperature control with electronic sensor
•   Short heating-up time thanks to a amply designed power supply.
•   Efficient soldering iron for a wide range of application
•   Temperature range from 150 to 450°C (300-850°F)
•   Optical and acoustic error indication in case of malfunction
•   ESD-safe

Technical Specifications
 

•   Input Power: 230V (220-240V), 50Hz
•   Soldering iron power: 48W
•   Fuse: T 1A/250V
•   Temperature range: 150°C-450°C (300-850°F), in 1°C or 5°C steps
•   Display accuracy: 5%
•   LC-Display with 3 1/2 digits
•   Max. Input Power: ca. 90VA
•   Dimension WxHxL: 185x100x150mm
•   Weight: ca. 2.0kg

Contains

•   Solder station  with iron holder and drawer with sponge
•   Solder iron with tip 1,6 mm
•   Color of station plastic can vary

 

 

AT-90DH is a professional soldering station which has high power consumption. It is used for SMD electronic components' soldering and un-soldering in factory or workbench.

• Only 10 seconds is needed from room temperature to 350°C.
• Silver alloy conductive materials ensures a minimum heat loss.
• Fresh new appearance, big LCD back-light display, easy readout.
• Visual operating control, analog bar indicates temperature change.
• Multi-power switching mode control suitable for different occasions.
• Access to three sets of temperatures, rapid conversion of the temperature required.
• Temperature lock with personalized code.
• Intelligent sleep function, sleep time is adjustable to facilitate choice of different users, energy-efficient and environmentally friendly.
• Buzzer alarm function
• Extended lifespan of iron tips
• Split design of iron tip and heating element
• Specifications
• Input voltage:   230V (220-240V), 50Hz
• Output voltage:   24VAC
• Temperature range:   100~500°C
• Temperature calibration range:   -50~50°C
• Power consumption:   90W
• Sleep temperature:   200°C
• Sleep time:   0-99 min
• Dimension:   168x95x110mm

Accessories

• Soldering station AT-90DH
• Power plug
• Iron stand (with sponge)
• Soldering iron
• Manual

Spare solder tip 1,6mm for soldering station AT-938D

The Fume extractor incorporates a built in high efficiency, low noise, brushless mini fan. A-Must tool for those who solder and want to protect themself from inhaling the smoke.
Easy to replace activated carbon filter effectively absorbs noxious flux and lead fumes. Quickly removes smoke and fumes.

• Works on  :230v
• Consumption:22w
• Weight: 1.6kg

Soldering Iron Stand with cleaning sponge

A quality soldering iron stand with a heavy duty metal base. This stand features a reinforced spring safety holder to prevent flex tangling in the coil and comes complete with a useful cleaning sponge.

Soldering iron RT 80 for the electronic temperature controlled soldering station RDS 80

Would you like to make the task of soldering these connectors simple and easy? If so, you've come to the right place. This jig quickly and securely clamps, holds, and releases these connectors for your soldering tasks. To enjoy the many benefits of this soldering jig, go to our order page now for a great price!
 connectors.

Holds the following connectors: XT60, Deans T connector, Traxxas, EC-3, EC-5, Multiplex 6 pin, Deans Micro , BULLET connectors

Connectors and accessories are Not included

Soldering Precision Electronic Tool Set Multimeter with 18 Accessoires

Set with more than soldering iron (20/130W), iron stand,de soldering pump, solder wire, multimeter, box of electronic screwdrivers,component storage box, different screwdrivers, soldering aid kit and pliers in a bag with zip.
Soldering set with wide accessories. Particularly useable are the screw able cowl for the shank of soldering iron, which protects the bag against singeing.

Solder Iron with tip, power cord and screw able cowl for the shank of iron. Input voltage: 230V (220-240V), 50Hz.

Set contains:

• Soldering Iron with soldering tip power cord and screw-on cover sleeve for the stem.
• Input Voltage: 230 V (220 – 240 V), 50Hz
• Soldering Iron Holder
• Solder in Dispenser, 1 mm, lead-free (99,3% Sn/0.3% Copper
• DESOLDERING PUMP
• Digital Multimeter (DCA, ACV, DCV, Ω, Hfe, Diode Test) no battery included
• Measuring cable for multimeter
• Electricians Screwdriver Set in a separate box
• Small parts box (8 compartments with lid)
• Magnifying Glass
• Tweezers
• Small side cutters
• Small combination/Long Nose Pliers
• Phillips Screwdriver
• Slotted Screwdriver
• Voltage Tester
• Claw Pick-Up Tool 3 needle tweezers)
• 3 Piece Board cutlery
• Telescopic Magnet, 125 – 650 mm

Replacement Soldering Sponge 38 x 58mm thickness 2mm (2pcs), used for solder stations.

Soldering Station with digital display, 160-480 °C, with soldering irons and soldering and soldering iron holder and sponge

Cheap soldering station for hobby and workshop. The temperature can be continuously adjusted using the control dial of 160-480 ° C. Performance depending on the temperature to about 40 watts.
 

• On and off switch with light
• LCD display for temperature with blue back light
• Rotary controls for temperature
• Soldering iron with tip and 1m cable
• Solder Sponge for wiping the tip
• Drawer for Soldering
• soldering Iron Holder
• Specifications
• Operating voltage: 230V (220-240), 50 Hz
• Soldering iron power: about 48W
• Temperature range: 160-480 ° C
• Weight: about 630g
• Dimension (BxHxL): approx 98x70x155mm

         Included:

• Soldering Station ZD-8906L with soldering iron tip
• English user manual

4 piece of replacement soldering tips : 1.0/1.5/2.0/3.0 mm suitable for the solder stations HEP-1540080

4 soldering tips for soldering stations ZD-8906

 included:

•   1 Soldering Tip 0,5mm
•   1 Soldering Tip 1,5mm
•   1 Soldering Tip 2.0mm
•   1 Soldering Tip 3.0mm

The ideal solder for lead work and projects requiring extra strength .

Avaliable in 1m, 5m, 10m

This is no-clean solder wires that contain no rosin, no halides and are recommended when soldering in class 3 (IPC-A-610). Since the body of the IF 14 flux carrier can evaporate by heat (rather than carbonising), residues can easily be cleaned with a brush.
 
Key Advantages

Reduced contamination of tools, equipment, due to the low flux content

• Low non sticky residue, easily removable by hand
• No colophony fumes
• Classification to IPC and EN: RE L0
• Absolutely halogen free
• Long tip-life
• Long product history
• Very good wetting on Cu, Ag, Sn