Set Up Tools

Products


  • 250 Ball Link Plier

    250 Ball Link Plier

    Ball Link plier for trex 250 and Other sub micro helis..

    SKU: H25070
    €5.99
    inc. VAT

     LOW STOCK
  • 4 SoftFinish®-telescopic handle

    4 SoftFinish®-telescopic handle

    SYSTEM 4 SoftFinish®-telescopic handle. Ergonomic multi-component handle with roll-off protection.

    Handle: With 4 mm hex retainer for all SYSTEM 4 blades. Enables adjustable blade lengths from 18-90 mm. ClickStop ball clamp guarantees a secure hold and rapid blade exchange.

    Application: Ideal for all precision work in the fields of electronics and mechanics

    SKU: WI-2691S
    €10.50
    inc. VAT

     72HR STOCK
  • 4-in-1 Retaining Circlip Clip

    4-in-1 Retaining Circlip Clip

    4-in-1 Retaining Circlip Clip

    Combination internal / external 6" retaining ring plier for use with C style clips.

    Set comes with 180, 90, 45 degree piece convertible tips.

    Fantastic tool for removing c-clips on motor and helicopter shafts.

    Effective range:

    • External : 10~50mm
    • Internal : 10~50mm

    SKU: SKU41605
    €9.99
    inc. VAT

  • 4/6mm Spindle Shaft Wrench

    4/6mm Spindle Shaft Wrench

    Lynx Heli Innovations is always looking for a better way of doing things.

    Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material.

    FEATURES:

    • Support and help Spindle Shaft screw assembly and disassemble
    • Easy and quick use thanks special Lynx ergonomics design.

    TECHNICAL SPECIFICATION:

    • Wrench Material: Aluminum 7075T6 – Silver Color anodized
    • One Way Bearing Material: Chrome Steel – Japan Made

    SKU: LX0170
    €22.99
    inc. VAT

     72HR STOCK
  • 8/10mm Spindle Shaft Wrench

    8/10mm Spindle Shaft Wrench

    Lynx Heli Innovations is always looking for a better way of doing things.

    Lynx design a series of One Way Wrench tools suitable for all different Spindle Shaft diameters. This tool is really usefully once in case of maintenance both sides of screws need removed. Lynx wrench is a combination of innovative design and high quality material


    FEATURES:

    • Support and help Spindle Shaft screw assembly and disassembly
    • Easy and quick use thanks special Lynx ergonomics design.


    TECHNICAL SPECIFICATION:

    • Wrench Material: Aluminum 7075T6 – Silver Color anodized
    • One Way Bearing Material: Chrome Steel – Japan Made
    SKU: LX0169
    €25.99
    inc. VAT

     72HR STOCK
  • Align AP800 Helicopter Digital Pitch Gauge

    Align AP800 Helicopter Digital Pitch Gauge

    This is the Align AP800 Digital Pitch Gauge,suitable for flybar and flybarless helicopters and features an auto-detecting Horizontal level, and the results are displayed through a high contrast LCD screen, providing a simple and precise way to measure pitch angles.

    Specifications

    •     Auto-detecting Horizontal level.
    •     Uses backlighting LCD monitor.
    •     Zero and Lock function.
    •     Detectable pitch range: -90° ~ 90°.
    •     Automatic screen rotation.
    •     Suitable for 200~800mm main blades.
    •     Build-in energy saving function, power shuts down after 3 minutes without any movement.

    Specifications:

    • Body Dimension: 108x53.9x16mm
    • Suitable blade width: 20mm~74mm
    • Detectable pitch range: ±90°
    • Resolution: 0.1°
    • Battery: 2x CR 2032 Lithium
    • Weight: 38g (including battery)
    SKU: HET80001
    €35.00
    inc. VAT

     LOW STOCK
  • Analog Dial Indicator-metric

    Analog Dial Indicator-metric

    Shock Proof Dial Indicator-metric, a tool which heli can not fly without..
    60 mm large, for easy readout..

    This item is Made in Japan

  • Steel body
  • Jeweled
  • Rack shockproof
  • Inside tolerance
  • Semi-seal cap
  • Plastic flat back
  • Precision: 0.01mm
  • Diameter :60 mm
  • Measurement range : 0-5mm

  • SKU: INDDM560
    €25.00
    inc. VAT

     IN STOCK
  • Anti static Voltage Detector

    Anti static Voltage Detector

    This detector designed for electrical and Electro static testing

    Easily and safely test for power with this GK7 non-contact voltage detector.
    The GK7 has a working range of 70 VAC - 1000 VAC and is perfect for job sites everywhere!

    This tool can save you Hundreds of Euros $$$, by helping you to solve electro static sources on your heli.

    Find bad bearings, problem with belt, all turning parts which creating electrostatic energy. this one destroying ESC, receivers and resulting crashes and damage..

    Use the tool to find out if and where you have the electrostatic electricity on your heli, then use Antistatic spray to remove it.

    This tool is a MUST TO HAVE!!!

    •   Non-Contact AC detecting from 90V to 1000VAC
    •   This instrument is only used to judge whether the conductivity is live or not.
    •   LED flash and continual beep when near an AC Voltage source


    Product Specification:

    •   Voltage Sensitivity: 90~ 1000VAC
    •   Bandwidth: 50/60Hz
    •   Normal Indicators: Beep and flashing LED indicate the presence of AC and static voltage
    •   Battery Indication: The LED Will not flash if the batter is less than 2V. The beep sounds still on but may be weaker.
    •   Portable design
    •   Easy to use
    •   Safe
    •   Plastic tip over contact point for safety
    •   Audible alert with flashing LED
    •   70 VAC - 1000 VAC detection range
    •   50/60 Hz frequency range
    •   Perfect on-site tool
    •   Runs on two (2) AAA batteries (included)
    •   Pocket clip
    •   CAT III
    •   Test voltage on sockets or cords

    Included:

    •   Non-Contact AC Voltage Detector x 1
    •   1.5V Battery (AAA) x 2
    •   English Manual x 1
    SKU: EMX99780
    €12.00
    inc. VAT

     IN STOCK
  • Anti static Voltage detector

    Anti static Voltage detector

    This detector designed for electrical and Electro static testing

    This tool can save you Hundreds of Euros $$$, by helping you to solve electro static sources on your heli.

    Find bad bearings, problem with belt, all turning parts which creating electrostatic energy. this one destroying ESC, receivers and resulting crashes and damage..

    Use the tool to find out if and where you have the electrostatic electricity on your heli, then use Antistatic spray to remove it.

    This tool is a MUST TO HAVE!!!

    • Non-Contact AC detecting from 90V to 1000VAC
    • This instrument is only used to judge whether the conductivity is live or not.
    • LED flash and continual beep when near an AC Voltage source


    Product Specification:

    • Voltage Sensitivity: 90~ 1000VAC
    • Bandwidth: 50/60Hz
    • Normal Indicators: Beep and flashing LED indicate the presence of AC and static voltage
    • Battery Indication: The LED Will not flash if the batter is less than 2V. The beep sounds still on but may be weaker.
    • Portable design
    • Easy to use
    • Safe
    • Plastic tip over contact point for safety
    • Audible alert with flashing LED
    • 70 VAC - 1000 VAC detection range
    • 50/60 Hz frequency range
    • Perfect on-site tool
    • Runs on two (2) AAA batteries (included)
    • Pocket clip
    • CAT III
    • Test voltage on sockets or cords

    Included:

    • Non-Contact AC Voltage Detector x 1
    • 1.5V Battery (AAA) x 2
    • English Manual x 1
    SKU: UT12A
    €16.00
    inc. VAT

  • ANTISTATIK 100 Spray- Get ESD electro static away from your Helicopter

    ANTISTATIK 100 Spray- Get ESD electro static away from your Helicopter

    Against electro-static charge. A must for Helicopters
    Surface-active product preventing accumulation of static electricity on various surfaces. Leaves ultra-thin invisable anti-static film.
    ESD-protection.
    Spray- 200 ml

    SKU: EMX-36301
    €9.90
    inc. VAT

     IN STOCK
  • Ball Joint Driver

    Ball Joint Driver

    Suitable for ball link and quicklink.Simple tool, which saves a lot of hand-stress.Contents: 2 pcs.

    SKU: RCTA-002
    €6.50 €8.00
    inc. VAT

     LOW STOCK
  • Ball Link Adjusters

    Ball Link Adjusters

    This set of alloy ball end adjusting tools simply plug over the ends of control end pushrods and allow easy and precise adjustment. Protects your ball links and your fingers!!

    SKU: H7050
    €11.00 €12.00
    inc. VAT

     LOW STOCK
  • Ball link reamer

    Ball link reamer

    Ball link sizing tool 4.75- 4.8 mm

    SKU: T6006
    €8.50
    inc. VAT

     LOW STOCK
  • BEASTX Bevel Box and Mounting Frame Set

    BEASTX Bevel Box and Mounting Frame Set

    BEASTX Bevel Box and Mounting Frame Set

    360° Inclinometer "Bevel Box"

    Digital Bevel Box solves the problem just put on the magnetically adhering device and is immediately displayed the exact horizontal angle.
    So you can precisely align your tools, rows are marked out accurately.

    Measuring range =b1180 degrees, Accuracy =b10,1 degrees
    Resolution 0,1 degrees
    Waterproof housing (IP 54)
    Magnetic Case
    Dimensions (W x H x D): 50 x 50 x 32 mm
    Operating with 1x Button Cell CR 2032 (in content)

    Mounting Frame for Bevel Box (BXA76005)

    To adjust the pitch values, simply pull the mounting frame on to the rotorblade.
    use for T-Rex 450 up to T-Rex 700

    Technical Data:
    Material: Carbon, black
    Thickness: 2,5mm

    Mounting Frame is pre-assembled
    You just have to put the Digital Bevel Box into the Carbon Frame and go on !

    Content:
    scews and acessories
    Inclinometer Bevel Box
    Bag
    Li-Button cell /CR2032

    SKU: BXA76005-SET
    €49.99
    inc. VAT

     72HR STOCK
  • Blade Balancer

    Blade Balancer

    Balancer for most blades, a "must" tool
    SKU: H60110
    €22.00
    inc. VAT

     72HR STOCK
  • Blade Balancer Helicopters

    Blade Balancer Helicopters

    This superb quality universal blade balancer uses a precision machine alloy center beam supported by twin sealed ball races.

    Supplied with bushes to suite both 2, 2.5,  3mm & 4mm main and tail blade root and a black anodised alloy support stand

    SKU: HA135BLU
    €29.50 €32.00
    inc. VAT

     LOW STOCK
  • Chrome Vanadium Steel Ball link Plier for RC Helicopter

    Chrome Vanadium Steel Ball link Plier for RC Helicopter

    These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open.
    Not only the best we've used, also the best value!

    High quality chrome vanadium steel material , Slip-resistant handle, easy to hold it and operate.
    Suits for RC helicopter DIY

    Specifications:
    Material: Chrome vanadium steel
    Size: 16.7*7.5*1cm
    Weight: 180g

    SKU: DH-T039
    €15.00
    inc. VAT

  • Combination Spanner Set (10pcs)

    Combination Spanner Set (10pcs)

    This "economy" spanner set includes just about all the sizes you will ever need on a model heli.
    Ideal for you field box and building bench.

    Sizes included are : 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm.
    Set of 10 spanners

    SKU: QT-05
    €24.00
    inc. VAT

     LOW STOCK
  • Connecting Rod Wrench

    Connecting Rod Wrench

    Using on T-REX 450 / 500 / 550 / 600 / 700 / 800.

    Connecting Rod Wrench x 2
    SKU: HOT00008
    €3.50 €3.95
    inc. VAT

     LOW STOCK
  • Cross wrench

    Cross wrench

    Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

    This wrench will fit from Glow plug removal to Motor nut replacement.
    Wrench sizes are : 5.5 - 7 - 8 - 10 mm

    SKU: RDVS0019
    €5.00 €8.00
    inc. VAT

     IN STOCK
  • Curved Micro Helmostat

    Curved Micro Helmostat

    Curved Micro Helmostat

    These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

    Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

    SKU: SQU10502
    €4.00
    inc. VAT

     LOW STOCK
  • Deluxe ball Link Plier (Curved)

    Deluxe ball Link Plier (Curved)

    Deluxe type, ball link plier, multi purpose tool.

    These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open. Not only the best we've used, also the best value!

    Color of handle may vary..

    SKU: HT-3013-2
    €14.00
    inc. VAT

     IN STOCK
  • Digital Caliper

    Digital Caliper

    Japan made Stainless steel caliper. Precision without compromise.

    Features:

    * Manual power on/off
    * Metric/Inch conversion.
    * Zero setting at any position
    * SPC output.
    * Easy measurement of narrow grooves.

    Size: 6"/ 150mm, Precision 0.01mm

    SKU: 100-9006
    €29.00 €35.00
    inc. VAT

     IN STOCK
  • Digital Infrared Thermometer 12:1 adjustable Emissivity

    Digital Infrared Thermometer 12:1 adjustable Emissivity

    Digital infrared thermometer -30 - +550°C with laser and display back light for non-contact measurement.

    Features:

    • Display: LCD with back-light
    • Data-Hold-Function
    • Auto power off
    • Units: °C and °F
    • Laser pointer
    • Adjustable Emissivity

    Technical Specifications:

    • Range: -30-550°C Resolution: 0,1°C
    • Accuracy: ±2% or 2°C between 0 and 100°C, ±3% or 3°C upper and lower
    • Repeatability: ±1°C
    • Distance ratio: 12:1
    • Emissivity adjustment: 0,1-1
    • Power supply: 9V-Battery

    Includes:

    • Infrared-Thermometer
    • German and English manual
    SKU: HP-880E
    €26.99
    inc. VAT


Manufacturers

Back