Generic Upgrades

Generic upgrades which can be used on most Helicopters
Page of 3
30-50 Size Carbon Boom support

30-50 Size Carbon Boom support

Carbon Boom support, with CNC caps

€16.00

Inc. VAT
Quantity
3D AL servo horn JR servo

3D AL servo horn JR servo

3D CNC servo arm, for Jr servos ( standard size)
Avaliable in - 38mm length , 1 pcs

 

€5.00

Inc. VAT
Quantity
3D Helicopter Purple Paddles m4 500-700 size

€4.99

Inc. VAT
Quantity
Ball links set

Ball links set

Blue or neon red colors, set of 10

€5.00

Inc. VAT
Quantity
Boom Support Bridge

Boom Support Bridge

Tail Support Bridge , a Must for your heli. Stop vibrations of Boom support .

Fits 6-8mm supports.

€7.50

Inc. VAT
Quantity
Canopy Rubber nuts, 450 size, set of 4

Canopy Rubber nuts, 450 size, set of 4

Canopy Rubber nuts, made from wear resistant rubber material.

can be used on Any 300-450 class helicopter canopy.

€4.50

Inc. VAT
Quantity
Canopy Rubber nuts, 600-700 size, set of 4

Canopy Rubber nuts, 600-700 size, set of 4

Canopy Rubber nuts, made from wear resistant rubber material.

can be used on Any 600-700 class helicopter canopy.

€4.50

Inc. VAT
Quantity
CANOPY THUMB SCREW

CANOPY THUMB SCREW

Aluminium Thumb screw set, Very light, 4 pcs pack.

M3, fits all size canopies

€4.50

Inc. VAT
Quantity
Carbon Boom ms Stinger

Carbon Boom ms Stinger

Carbon Boom for MS stinger

€19.00

Inc. VAT
Quantity
Carbon Boom support Ends set 8mm (no rods) set of 4

Carbon Boom support Ends set 8mm (no rods) set of 4

CNC ends set(caps), for 8mm tubes.

Include 4 pcs, silver Anodized color

*If you need to order the carbon tubes, please order 2 pcs of 8mm
 

€10.00

Inc. VAT
Quantity
Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

Specifications:

  • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 4x2.5mm), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
  • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 4x2.5mm eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
  • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
  • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
  • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
  • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
  • The CFRP ball joint adapter can be painted easily.
  • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
  • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
  • The result is a high strength component, which does not bear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All CFRP components are manufactured in Germany using the latest CNC machines.

€8.00

Inc. VAT
Quantity
Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

Specifications:

  • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
  • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
  • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
  • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
  • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
  • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
  • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
  • The CFRP ball joint adapter can be painted easily.
  • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
  • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
  • The result is a high strength component, which does not bear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All CFRP components are manufactured in Germany using the latest CNC machines.

€8.00

Inc. VAT
Quantity
Carbon Header Tank Mount

Carbon Header Tank Mount

High quality carbon fiber header tank mount for any nitro/gas heli.
Weight - 5gr.

€9.00

Inc. VAT
Quantity
Carbon Tail Boom 22mm

Carbon Tail Boom 22mm

Rigid, Lighter and more Stronger then the stock metal boom, made from High Strength material.


This is a boom to be used on helicopter with sizes OD-22 mm, ID 20.5, Length- 950 mm, so can be adapted to any heli with this OD size.

Made in Germany

Thanks to the new technology - this Boom is stronger then the original Metal Boom.

€69.00

Inc. VAT
CFK fork servo lever 25mm Futaba

CFK fork servo lever 25mm Futaba

CFK fork servo lever 25mm Futaba

Specifications:

  • Fork servo lever with precise teeth (variant).
  • Gap servo driven ball center to 25mm.
  • Fork opening 5 mm.
  • Weight 0.8g.
  • Comes with built-in ball joint and M2 screw with lock nut.
  • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
  • The redesign of our fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The execution of a fork lever effectively prevents misjudged the servo drive output.
  • The servo gear will last longer.
  • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
  • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
  • The result is a high strength component which need not fear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All servo lever are manufactured in Germany using the latest CNC machines.

 

€6.00

Inc. VAT
Quantity
CFK fork servo lever 30mm Futaba

CFK fork servo lever 30mm Futaba

CFK fork servo lever 30mm Futaba

Specifications:

  • Fork servo lever with precise teeth (variant).
  • Gap servo driven ball center to 30mm.
  • Fork opening 5 mm.
  • Weight 1.5g.
  • Comes with built-in ball joint and M2 screw with lock nut.
  • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
  • The redesign of our fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The execution of a fork lever effectively prevents misjudged the servo drive output.
  • The servo gear will last longer.
  • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
  • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
  • The result is a high strength component which need not fear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All servo lever are manufactured in Germany using the latest CNC machines.

 

€6.00

Inc. VAT
Quantity
CFK fork servo lever 38mm Futaba

CFK fork servo lever 38mm Futaba

CFK fork servo lever 38mm Futaba

Specifications:

  • Gap servo driven ball center to 38mm.
  • Fork opening 6mm.
  • Fork hole for M3 thread. Weight 3g.
  • Comes with built-in ball joint
  • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
  • The redesign of our fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The execution of a fork lever effectively prevents misjudged the servo drive output.
  • The servo gear will last longer.
  • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
  • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
  • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
  • The result is a high strength component which need not fear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All servo lever are manufactured in Germany using the latest CNC machines.

 

€9.00

Inc. VAT
Quantity
CFK fork servo lever 46mm Futaba

CFK fork servo lever 46mm Futaba

CFK fork servo lever 46mm Futaba

Specifications:

  • Gap servo driven ball center to 46mm.
  • Fork opening 6mm.
  • Fork hole for M3 thread. Weight 3.5g.
  • Comes with built-in ball joint
  • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
  • The redesign of our fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The execution of a fork lever effectively prevents misjudged the servo drive output.
  • The servo gear will last longer.
  • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
  • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
  • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
  • The result is a high strength component which need not fear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All servo lever are manufactured in Germany using the latest CNC machines.

 

€9.00

Inc. VAT
Quantity
CNC Boom Support Ends (Set of 4) blue anodized

CNC Boom Support Ends (Set of 4) blue anodized

Suitable for 6mm CARBON tubes.
Set of 4

*If you need tubes, please order set of 2 tubes 6mm

 

€10.00

Inc. VAT
Quantity
Flybar Weight Set 3mm

Flybar Weight Set 3mm

Single piece Flybar weights. Fit all models with 3mm flybars.

Weight per pcs.: 7gr
Diameter inside: 3mm
This kit includes 2 pcs. inclouding set screws

€5.00

Inc. VAT
Quantity
FORK LEVER 2-ARM 24/30MM Futaba

FORK LEVER 2-ARM 24/30MM Futaba

FORK LEVER 2-ARM 24/30MM Futaba

Specifications:

  • Double fork servo lever with precise teeth (variant)
  • Gap servo driven ball center to 24mm / 30mm.
  • Fork opening 5 mm. 2.2 g weight.
  • Supplied with built-in ball joints
  • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp rudder.
  • The new design of our double fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The redesign of our fork servo lever is designed for ruggedness.
  • The power dissipation occurs in the middle of the servo gearing.
  • The execution of a fork lever effectively prevents misjudged the servo drive output.
  • The servo gear will last longer.
  • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
  • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
  • The result is a high strength component which need not fear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant. All servo lever are manufactured in Germany using the latest CNC machines.

 

 

€10.00

Inc. VAT
Quantity
HD boom support 8mm

HD boom support 8mm

Twin 8mm diameter Carbon fibre boom support set with high quality alloy CNC machined end fittings for superior strength and durabaility. For all 60-90size helis

€18.00

Inc. VAT
Quantity
Header Tank Size 80cc Assembly with Metal Alu Holder

Header Tank Size 80cc Assembly with Metal Alu Holder

Specifications:

  • Size: 81 * 40 * 25mm
  • Net Weight: 29g
  • Color: Purple
  • Holder material: Metal

Features:

  • TANK capacity: 80cc
  • This is a replacement Header tank with Metal Holder.
  • Great value and great looking CNC header tank support.

Package Included:

  • 1 x Header Tank
  • 1 x Holder
  • Color of holder is purple

€19.00

Inc. VAT
Quantity
Header Tank Size 80cc Assembly with Plastic Holder

Header Tank Size 80cc Assembly with Plastic Holder

Specifications:

  • Size: 77x40x27mm
  • Net Weight: 22g
  • Holder material:Plastic

Features:

  • TANK capacity: 80cc
  • This is a replacement Header tank 

Package Included:

  • 1 x Header Tank
  • 1 x Holder

€13.00

Inc. VAT
Quantity
Heavy Duty Ball Links with ball M2.5X27

Heavy Duty Ball Links with ball M2.5X27

This is a set of Heavy-Duty Ball Links for use with M2.5 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:
  • Length 27mm( end to end)
  • Rod diameter tread- 2.5 M
  • Ball mounting screw-M3
  • Set of 2 links with hardware
FEATURES:

  • White nylon link construction
  • Brass swivel-ball construction
  • Beveled brass swivel-ball stand-off
  • Hex-Head machine mounting screw

€3.90

Inc. VAT
Quantity
Heavy Duty Ball Links with ball M2X26 (2pcs)

Heavy Duty Ball Links with ball M2X26 (2pcs)

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

  • Length 26mm( end to end)
  • Rod diameter tread-M2-2.5
  • Ball mounting screw-M2
  • Set of 2 links with hardware

FEATURES:
 

  • BLACK nylon link construction
  • Brass swivel-ball construction
  • Beveled brass swivel-ball stand-off
  • Hex-Head machine mounting screw

€3.90

Inc. VAT
Quantity
Heavy Duty Ball Links with ball M2X30

Heavy Duty Ball Links with ball M2X30

This is a set of Heavy-Duty Ball Links for use with M2 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

  • Length 19mm( end to end)
  • Rod diameter tread-M2
  • Ball mounting screw-M2
  • Set of 2 links with hardware

FEATURES:
 

  • Black nylon link construction
  • Brass swivel-ball construction
  • Beveled brass swivel-ball stand-off

€3.90

Inc. VAT
Quantity
Heavy Duty Ball Links with ball M3X27

Heavy Duty Ball Links with ball M3X27

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

  • Length 27mm( end to end)
  • Rod diameter tread- M3
  • Ball mounting screw-M2
  • Set of 2 links with hardware

FEATURES:
 

  • White nylon link construction
  • Brass swivel-ball construction
  • Beveled brass swivel-ball stand-off
  • Hex-Head machine mounting screw

€3.90

Inc. VAT
Quantity
Heavy Duty Ball Links with ball M3X30

Heavy Duty Ball Links with ball M3X30

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

  • Length 30mm( end to end)
  • Rod diameter tread-M3
  • Ball mounting screw-M3
  • Set of 2 links with hardware

FEATURES:
 

  • Black nylon link construction
  • Brass swivel-ball construction
  • Beveled brass swivel-ball stand-off
  • Hex-Head machine mounting screw

€3.90

Inc. VAT
Quantity
Heavy duty Carbon Tail Pushrod set with Mikado links, CNC ends

Heavy duty Carbon Tail Pushrod set with Mikado links, CNC ends

This carbon tail pushrod kit is an Upgrade or replacement for any heli.  The kit includes a pair of CNC machined Pushrod ends, Mikado ball links.

Sizes Available are:

Pushrod (tube) thickness :4 or 5mm

Lenght of carbon rod is 90cm

€10.90

Inc. VAT
Quantity
Heavy Duty Landing Gear

Heavy Duty Landing Gear

We believe these "acetol" polymer resin undercarriages to be THE strongest and most energy absorbing units available.Suitable for use on all helis from 30 to 60 size.

Avaliable in Black or White color , with alloy skid tubes and plastic end caps..

€16.00

Inc. VAT
Quantity
Heavy Duty landing gear 700-800 size -black

Heavy Duty landing gear 700-800 size -black

We believe these "acetol" polymer resin undercarriages to be THE strongest and most energy absorbing units available.

Suitable for use as an extra heavy duty replacement on helis best fitted 700-800 class size machines. The mounting position has been reinforced to allow the struts to be re-drilled to suit virtually any application without effecting strength.

 

€29.90

Inc. VAT
Quantity
K&S Japan Header Tank Size 80cc Assembly

K&S Japan Header Tank Size 80cc Assembly

Specifications:

  • Size: 60x60x25mm
  • Net Weight: 22g
  • Holder material:Plastic

Features:

  • TANK capacity: 80cc
  • This is a replacement Header tank 

Package Included:

  • 1 x Header Tank set

€13.00

Inc. VAT
Quantity
M3 Control Ball

M3 Control Ball

Stainless steel control ball with M3 thread 4MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 4mm
Supplied in a pack of 5 pieces

€5.00

Inc. VAT
Quantity
M3 Control Ball

M3 Control Ball

Stainless steel control ball with M3 thread 6MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 4 mm
Supplied in a pack of 5 pieces

€5.00

Inc. VAT
Quantity
M3 Control Ball Short Thread (5 pieces)

M3 Control Ball Short Thread (5 pieces)

Stainless steel control ball with M3 thread 8MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 6/8mm
Supplied in a pack of 5 pieces

€5.00

Inc. VAT
Quantity
Page of 3