Eflite Blade 130-270

Page of 2
130X Ultraflex Landing Gear

130X Ultraflex Landing Gear

Lynx Heli Innovations propose an alternative to the standard 130X landing gear.
Combining Nylon and Elastomer Polymer we create an ultra flex landing gear that will surprise for it resistance.
This combination offer High-tech performance and lightweight landing gear.
Micro helicopter upgrades can be a trap; often they look nice but do little for function, and only add weight.
We spent time optimizing the design and fly testing to achieve the required strength with a final weight beyond compromise.
We are pilots, and we demand a light helicopter.

Lynx 130X Ultra Flex Landing Gear the new frontier of lightweight and innovative design.

 FEATURES:

  • Nylon 66 + Elastomer Polymer landing gear, super flexible and super resistant in case of hard landing or crash.
  • Aggressive and High-Tech profile design.
  • Direct replacement of std plastic landing gear
  • Integrate 3in1 board plate support in the front Skid Mount.

TECHNICAL SPECIFICATION:

  • Landing Gear: Nylon 66 + Elastomer Polymer
  • Hardware: Chrome Steel
  • Assembly weight: 4.75 g

PACKING LIST:

  • 1 x Plastic Landing Gear – COLOR might vary
  • 4 x M1.6×5 PAN Head Self Taping Screw

€6.00

Inc. VAT
Quantity
Blade 130X CNC AL Swashplate Set

Blade 130X CNC AL Swashplate Set

Blade 130X CNC AL Swashplate Set

€23.99

Inc. VAT
Quantity
Blade 180 CFX Aluminum Main Blade Grips (2pcs)

Blade 180 CFX Aluminum Main Blade Grips (2pcs)

Aluminum Main Blade Grips (2pcs) for the Blade 180 CFX

€28.90

Inc. VAT
Quantity
Blade 180 CFX Aluminum Tail Pitch Bellcrank

Blade 180 CFX Aluminum Tail Pitch Bellcrank

Aluminum Tail Pitch Bellcrank for the Blade 180 CFX

€17.90

Inc. VAT
Quantity
Blade 180 CFX Bevel Gear (4pcs)

Blade 180 CFX Bevel Gear (4pcs)

Bevel Gear (4pcs) for the Blade 180 CFX

€6.90

Inc. VAT
Quantity
Blade 180 CFX Radial Bearing 5x8x2mm

Blade 180 CFX Radial Bearing 5x8x2mm

Radial Bearing 5x8x2mm for the Blade 180 CFX

€6.00

Inc. VAT
Quantity
Blade 180 CFX Tail Boom (2pcs)

Blade 180 CFX Tail Boom (2pcs)

Tail Boom (2pcs) for the Blade 180 CFX

€13.50

Inc. VAT
Quantity
Blade 180 CFX Tail Grip Bearing Set

Blade 180 CFX Tail Grip Bearing Set

Tail Grip Bearing Set for the Blade 180 CFX

€8.50

Inc. VAT
Quantity
Blade 180 CFX Tail Grip Set (4pcs)

Blade 180 CFX Tail Grip Set (4pcs)

Tail Grip Set (4pcs) for the Blade 180 CFX

€9.90

Inc. VAT
Quantity
Blade 180 CFX Tail Pitch Slider

Blade 180 CFX Tail Pitch Slider

Tail Pitch Slider for the Blade 180 CFX

€10.90

Inc. VAT
Quantity
Blade 180 CFX Torque Tube Gear (4pcs)

Blade 180 CFX Torque Tube Gear (4pcs)

Torque Tube Gear (4pcs) for the Blade 180 CFX

€6.00

Inc. VAT
Quantity
Blade 200SRX Carbon Tube Tail Boom-Standard Length

Blade 200SRX Carbon Tube Tail Boom-Standard Length

 Carbon Tube Tail Boom-Standard Length for Blade 200 SRX, 2 PCS

€7.49

Inc. VAT
Quantity
Blade 200SRX CNC AL Swashplate Set (Red)

Blade 200SRX CNC AL Swashplate Set (Red)

CNC AL Swashplate Set (Red) for Blade 200 SRX

€27.47

Inc. VAT
Quantity
Blade 200SRX CNC AL Tail Boom Support Set (Red)

Blade 200SRX CNC AL Tail Boom Support Set (Red)

CNC AL Tail Boom Support Set (Red) for Blade 200 SRX

€12.60

Inc. VAT
Quantity
Blade 200SRX CNC Delrin Main Gear w/AL Hub Set (Red)

Blade 200SRX CNC Delrin Main Gear w/AL Hub Set (Red)

  • Precision CNC Aluminum Hub.
  • 120T 0.5M CNC Delrin Main Gear.
  • Compatible and replacement Stock Plastic Main Gear.
  • Optimized for weight and durability.

Usage:

  • Use for Blade 200SRX.

Weight:

  • CNC Delrin Main Gear w/AL Hub Set: 7.37(g) = 0.023(oz).

Included:

  • CNC Delrin Main Gear w/AL Hub (1set).

€13.26

Inc. VAT
Quantity
Blade 200SRX CNC Delrin Main Gear w/AL Hub Set (Silver)

Blade 200SRX CNC Delrin Main Gear w/AL Hub Set (Silver)

  • Precision CNC Aluminum Hub.
  • 120T 0.5M CNC Delrin Main Gear.
  • Compatible and replacement Stock Plastic Main Gear.
  • Optimized for weight and durability.

Usage:

  • Use for Blade 200SRX.

Weight:

  • CNC Delrin Main Gear w/AL Hub Set: 7.37(g)

Included:

  • CNC Delrin Main Gear w/AL Hub (1set).

€13.50

Inc. VAT
Quantity
Blade 200SRX CNC Hardened Steel Spindle Shaft Set

Blade 200SRX CNC Hardened Steel Spindle Shaft Set

CNC Hardened Steel Spindle Shaft Set for Blade 200 SRX

€3.78

Inc. VAT
Quantity
CNC AL DFC Head Combo (Red) for Blade 130X

CNC AL DFC Head Combo (Red) for Blade 130X

The CNC AL DFC Head is designed of 6061 Aluminum alloy to get:

  • Direct Flight Control (DFC) Rotor Head concept on the heli.
  • Performance and clear looking.
  • The linkage can be adjusted for blade tracking.
  • Optimized for weight and durability.

Content:

  • CNC AL Main Blade Grips (2sets).
  • CNC AL DFC Center Hub (1set).
  • Plastic DFC Linkage Set (2pcs)

€25.99

Inc. VAT
Quantity
CNC AL Main Rotor Hub Set (Red) - Blade 200SRX

CNC AL Main Rotor Hub Set (Red) - Blade 200SRX

Description:
- Precision CNC Aluminum Main Rotor Hub.
- All optimized for weight and durability.

Usage:
- Use for Blade 200SRX.

Weight:
- Stock Plastic Main Rotor Hub Set: 1.5(g).
- CNC Aluminum Main Rotor Hub Set: 1.4(g). Lighter weight than Stock: 0.1(g) .

Included:
- CNC AL Main Rotor Hub (1-set).

€20.90

Inc. VAT
Quantity
CNC CF Tail Fin Set (Black-Red)

CNC CF Tail Fin Set (Black-Red)

1. Description:

  • Carbon Fiber material, style with decals.
  • Optimized for weight and durability.

Note important:

  • The carbon fiber horizontal fin cannot use with stock plastic horizontal stabilizer fin mount.
  • Compatible with RKH's CNC AL Horizontal Stabilizer Fin Mount Set (SKU: 200SRX816).

2. Usage:

  • Use for Blade 200SRX.

3. Weight:

  • Stock Plastic Tail Fin Set: 2.08(g) = 0.066(oz).
  • CNC CF Tail Fin Set: 1.66(g) = 0.053(oz). Lighter weight than Stock: 0.42(g) = 0.013(oz).

4. Included:

  • CNC Carbon Fiber Horizontal and Vertical Tail Fin (1set).

€10.90

Inc. VAT
Quantity
E-Flite Blade 200 SR-X 6.0-Gram Super Sub-Micro S60 Servo

E-Flite Blade 200 SR-X 6.0-Gram Super Sub-Micro S60 Servo

E-Flite Blade 200 SR-X 6.0-Gram Super Sub-Micro S60 Servo

€16.90

Inc. VAT
Quantity
E-Flite Blade 200 SR-X Gear Set: S60

E-Flite Blade 200 SR-X Gear Set: S60

E-Flite Gear Set: S60 for the Blade 200 SR-X

€5.00

Inc. VAT
Quantity
E-Flite Blade 200 SR-X Stabilizer Fin Set White

E-Flite Blade 200 SR-X Stabilizer Fin Set White

E-Flite Blade 200 SR-X Stabilizer Fin Set White

€6.90

Inc. VAT
Quantity
FUSUNO Green Energy Blade 180 CFX Speed Fuselage (TDR shape)

FUSUNO Green Energy Blade 180 CFX Speed Fuselage (TDR shape)

PRODUCT INCLUDES:

  • 1 x Airbrush fiberglass canopy
  • 1 x Airbrush fiberglass tail boom
  • 1 x CF vertical Fin

DESCRIPTION:

  • Use for Blade 180 CFX.
  • Easy to install!
  • Separated body, it’s very easy to replace battery!
  • Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

  • Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
  • Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
  • Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
  • Remove two button head screws on both sides of the frame.
  • Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
  • Secure the Fusuno tail boom by tighten up the two button head screws.
  • Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
  • Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 

€39.90

Inc. VAT
Quantity
FUSUNO Yellow Energy Blade 180 CFX Speed Fuselage (TDR shape)

FUSUNO Yellow Energy Blade 180 CFX Speed Fuselage (TDR shape)

PRODUCT INCLUDES:

  • 1 x Airbrush fiberglass canopy
  • 1 x Airbrush fiberglass tail boom
  • 1 x CF vertical Fin

DESCRIPTION:

  • Use for Blade 180 CFX.
  • Easy to install!
  • Separated body, it’s very easy to replace battery!
  • Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

  • Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
  • Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
  • Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
  • Remove two button head screws on both sides of the frame.
  • Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
  • Secure the Fusuno tail boom by tighten up the two button head screws.
  • Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
  • Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 

€39.90

Inc. VAT
Quantity
Lynx Double Ball Bearing Tail Pitch Slider Red Devil Blade 130X

Lynx Double Ball Bearing Tail Pitch Slider Red Devil Blade 130X

Lynx Double Ball Bearing Tail Pitch Slider Red Devil Blade 130X LX0904

Lynx Heli Innovations has redesigned and improved upon the standard 130X plastic tail pitch slider, using a combination of 7075 aluminum alloy, low friction brass bushings and more robust linkages that comes fully assembled with spare parts.

The Pro Edition, as usual for Lynx represents the highest evolution in performance and quality. The tail pitch slider was revised with tighter tolerances and ABEC5 double bearings to give you the best smoothest actuating tail pitch slider for the 130X. In response to customer suggestions Lynx proudly introduces the Pro Edition tail pitch slider linkages. To save you time and headache we have pre-assembled the linkages and pins at the factory. We even include a spare set of linkages and pins to save down time after the eventual crash.

The tail pitch slider is one of the most critical components in any helicopter tail case. In order to insure the best performance, lightweight, precision and smoothness the bearings and bushings were our primary focus during our redesign.
After extensive testing, Lynx specified double ABEC5 radial bearings and special low friction brass bushings to slide freely on the tail shaft. No more tail jitters due to slow, sticky tail pitch sliders with loose fitment.

The tail pitch slider is factory assembled using dedicated equipment and expert staff with attention to detail in order to insure maximum quality and repeatability.

Details, design, strength, durability, precise CNC tolerances, fit and finish, and most importantly lightweight all contribute to increased tail response and insures precision tail holding ability while minimizing vibration flight after flight. This is the perfect first upgrade that offers a big tail performance boost for every 130X.

FEATURES:

  • Direct fit replacement part for the standard 130 X tail pitch slider
  • Preassembled with lubricated bearings
  • Includes two spare linkages and pins
  • FEA (Final Elements Analysis) assisted in achieving the most lightweight part with maximum strength.
Pro Edition Special improved Features:

  • Revised dimensions, tighter tolerances for the best performance and no vibrations
  • Highest quality radial bearings for the smoothest operation and greater wear resistance
  • Easy to use / install (Ready to Fly) thanks to factory pre-assembly of pitch slider linkages and pins
  • Extra set of linkages and pins for your convenience
TECHNICAL SPECIFICATIONS:

  • Main Body Material: Aluminum 7075-T6 – Silver anodized finish
  • Bearing Material: Chrome Steel –ABEC5 Precision Class
  • Slide Bushing Material: Low Friction Brass alloy
  • Tail Pins Material: SST
  • Assembly weight: 0.62g

€20.90

Inc. VAT
Quantity
Lynx Heli Innovations Blade 130 X Tail Grip Set Red Devil Edition 2pcs

Lynx Heli Innovations Blade 130 X Tail Grip Set Red Devil Edition 2pcs

Lynx Heli Innovations 130 X Tail Grip Set Red Devil Edition 2pcs

Lynx Heli Innovations has redesigned the standard 130 X plastic tail grip, using aluminum alloy.
Our tail grip are weighted with integrated CNC weigh, positioned very close the tail shaft rotation center.
Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight, in particular micro helicopters tail components, were smaller weight difference  can made huge difference in final performance.
We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, we expect form our upgrade a better performance.
After many flights, we decided on a single 4x1.5x2 radial bearing design. Simple, lightweight and durable. Only 0.35g each grip assembled, with a huge increase in tail precision and strength.
The counter couple weights are sized to reduce the servo load during fly, giving faster tail response, less vibration and increase tail servo longevity.
The details and design of these tail grips add top performance in your 130X tail system.
TIPS FOR THE BEST PERFORMANCE:
Tail grip are weighted and have better performance compare the std one. Reduce 2 or 3 steep tail gyro gain to compensate Lynx tail grip efficiency.

FEATURES:

  • Direct replacement for the standard 130 X tail parts.
  • Increase tail response and reduce vibration.
  • Preassembled with lock thread linkage balls and lubricated bearing
  • SST linkage balls to assure durability and wear resistance
  • Integrated CNC counter balace weight to reduce servo load during fly maneuvers, giving faster tail response, less vibration and increase tail servo longevity.
  • FEA (Final Elements Analysis) design assisted, achieve lightweight and maximum strength.


TECHNICAL SPECIFICATION:

  • Tail Grip material: Aluminum 7075-T6 – red anodized finish.
  • Bearing Material: SST – ABEC5
  • Linkage Ball Material: SST
  • Assembly weight: 0.7g (the couple)
  • PACKING LIST:
  • 2 x 130 X – CNC Tail Grips factory assembly

€23.90

Inc. VAT
Quantity
Main rotor blade set (green) Blade 230s

Main rotor blade set (green) Blade 230s

Main rotor blade set (green) Blade 230s

€10.90

Inc. VAT
Quantity
Rakon CNC Aluminum Tail Boom-Standard Length (Red) - Blade 200SRX

Rakon CNC Aluminum Tail Boom-Standard Length (Red) - Blade 200SRX

Rakon CNC Aluminum Tail Boom-Standard Length (Red) - Blade 200SRX 

€10.99

Inc. VAT
Quantity
Rakonheli Blade 130/200SRX Carbon Tail Boom Support Rod Set (2pcs)

Rakonheli Blade 130/200SRX Carbon Tail Boom Support Rod Set (2pcs)

Carbon Tail Boom Support Rod Set (2pcs) for Blade 130/200 SRX

- Carbon rod Ø2, 130mm length.
- Optimized for weight and durability.

€2.84

Inc. VAT
Quantity
Rakonheli CNC 12mm Heatsink Main Motor Mount Set (Green) for Blade 130X

Rakonheli CNC 12mm Heatsink Main Motor Mount Set (Green) for Blade 130X

Description:

  • Precision CNC of 6061 Aluminum alloy.
  • Heatsink designed with large contact area help main motor increase effeciency and cooler.
  • Optimized for weight and durability.

Usage:

  • Use for Blade 130X.

Weight:

  • CNC 12mm Heatsink Main Motor Mount Set: 0.75(g) = 0.026(oz).

Included:

  • CNC 12mm Heatsink Main Motor Mount (2pcs)

€7.57

Inc. VAT
Quantity
Rakonheli CNC 3 Blades Head Combo 02 (Green) Blade 130X

Rakonheli CNC 3 Blades Head Combo 02 (Green) Blade 130X

CNC 3 Blades Head Combo 02 (Green) Blade 130X

1. Description:
Multi-Blade Head system is designed for whom want to built scale Helicopter at 130X size.
With the original motor setup, it is not a overpowered 3D monster but can do most of aerobatic maneuvers: Flip, Roll and Inverted flights.
You can also play with your outrunner brushless motor and pinion setup to get more powerful and fun.
Optimized for weight and durability.
The 3-Blades Head systems can be fitted to 130X

2. Usage:
Use for Blade 130X.

3. Weight:
CNC 3 Blades Head Combo 02 (included RKH's Parts and BLADE's Red Bull 130X Parts): 11.75(g) = 0.41(oz).

4. Included:
(SKU: 130X016-G) CNC 3 Blades Main Rotor Hub Set (Green) Blade 130X (1-set).
(SKU: 130XR034-G) CNC Multi-Blades Main Blade Grip Set (Green) Blade 130X/Red Bull 130X (3-sets).
(SKU: 130XR198-G) CNC Multi-Blades Swashplate Set (Green) Blade 130X/Red Bull 130X (1-set).

5. Needed To Complete:
(SKU: FOB3808-3) 3 Feathering Spindle w/O-Rings, Bushings (1-set).
(SKU: LK3809-3) 3 Rotor Head Linkages (1-set).
(SKU: RS00661-3) 3 Plastic Main Rotor Blades 126mm (Grey) (1-set).

€70.04

Inc. VAT
Quantity
Rakonheli CNC 3 Blades Head Combo 02 (Red) Blade 130X

Rakonheli CNC 3 Blades Head Combo 02 (Red) Blade 130X

Rakonheli CNC 3 Blades Head Combo 02 (Red) Blade 130X

1. Description:
Multi-Blade Head system is designed for whom want to built scale Helicopter at 130X size.
With the original motor setup, it is not a overpowered 3D monster but can do most of aerobatic maneuvers: Flip, Roll and Inverted flights.
You can also play with your outrunner brushless motor and pinion setup to get more powerful and fun.
Optimized for weight and durability.
The 3-Blades Head systems can be fitted to 130X

2. Usage:
Use for Blade 130X.

3. Weight:
CNC 3 Blades Head Combo 02 (included RKH's Parts and BLADE's Red Bull 130X Parts): 11.75(g) = 0.41(oz).

4. Included:
(SKU: 130X016-G) CNC 3 Blades Main Rotor Hub Set (Green) Blade 130X (1-set).
(SKU: 130XR034-G) CNC Multi-Blades Main Blade Grip Set (Green) Blade 130X/Red Bull 130X (3-sets).
(SKU: 130XR198-G) CNC Multi-Blades Swashplate Set (Green) Blade 130X/Red Bull 130X (1-set).

5. Needed To Complete:
(SKU: FOB3808-3) 3 Feathering Spindle w/O-Rings, Bushings (1-set).
(SKU: LK3809-3) 3 Rotor Head Linkages (1-set).
(SKU: RS00661-3) 3 Plastic Main Rotor Blades 126mm (Grey) (1-set).

€70.04

Inc. VAT
Quantity
Rakonheli CNC AL Canopy Mount Set (Red)

Rakonheli CNC AL Canopy Mount Set (Red)

1. Description:
- Precision CNC machining of 6061 Aluminum alloy.
- Colorful anodizing with 2 options: Silver and Red.
- Optimized for weight and durability.

2. Usage:
- Using for Blade 130X.

3. Weight:
- CNC AL Canopy Mount Set: 0.53(g) = 0.018(oz)

€7.26

Inc. VAT
Quantity
Rakonheli CNC AL Canopy Mount Set (Silver)

Rakonheli CNC AL Canopy Mount Set (Silver)

1. Description:
- Precision CNC machining of 6061 Aluminum alloy.
- Colorful anodizing with 2 options: Silver and Red.
- Optimized for weight and durability.

2. Usage:
- Using for Blade 130X.

3. Weight:
- CNC AL Canopy Mount Set: 0.53(g) = 0.018(oz)

€7.26

Inc. VAT
Quantity
Rakonheli CNC AL Main Shaft Collar Set (Green) for Blade 130X/Red Bull 130X

Rakonheli CNC AL Main Shaft Collar Set (Green) for Blade 130X/Red Bull 130X

Description:

  • Precision CNC machining of 6061 Aluminum alloy.
  • Optimized for weight and durability.


Usage:

  • Use for Blade 130X/Red Bull 130X.


Weight:

  • CNC AL Main Shaft Collar Set: 0.19(g) = 0.006(oz)


Included:

  • CNC AL Main Shaft Collar (1pcs).


*Hardware
(SKU: M1.4x6PH-10) M1.4x6mm Pan Head Screw (1pcs).

€4.73

Inc. VAT
Quantity
Page of 2