Miniature Aircraft

Miniature Aircraft

Famous producer of X-cell helicopters, Now made in germany

Miniature aircraft Furion 6 FBL - Kit version

Miniature aircraft Furion 6 FBL - Kit version

Miniature aircraft Furion 6 FBL - Kit version Aluminum Boom Clamps Motor Shaft Lower Bearing Support Optional Pinion Gear Available Removable Battery Tray Flybarless Rotor Head: Full Ball Bearings/Thrust Bearings Heavy Duty Hiller Rods 8mm Head Axle CNC Machined Aluminum Swashplate Hex/Hardened Control Balls CNC Aluminum Head Button CNC Aluminum Blade Grips High Quality Swashplate Heim Ball/Ball Bearing Simple SleekDesign Tail Rotor: Full Ball Bearings Graphite Painted Tail Fin Secure CNC Aluminum Tail Rotor Clamps 22mm Lightweight Aluminum Tail Boom Positive Control System 2mm Control Rod Hardened Tail Rotor Output Shaft Carbon/Aluminum Boom Supports Canopy High Visibility Painted Epoxy-Glass Canopy by Canomod Additional Furion 6 Specifications: 6S Battery Setup Recommended Motor KV Range: 850-900 Gear Ratio: 8.38:1 (12t pinion gear/103t main gear) Battery Size: 6S 5000mah Main Rotor RPM: 2100-2300 Motor Shaft Size: 6mm x 30/32mm 10S Battery Setup Recommended Motor KV Range: 540-560 Gear Ratio: 9.08:1 (11t pinion gear/103t main gear) Battery Size: 2 x 5S 4000-5000mah Main Rotor RPM: 2200-2600 Motor Shaft Size: 6mm x 30/32mm

€660.00

Inc. VAT
Miniature aircraft Whiplash 730E (FBL) - Kit

Miniature aircraft Whiplash 730E (FBL) - Kit

  • NEW aggressively-styled, stiffer frames with side-by-side battery mounting for better GC control
  • Increased cyclic and tail rate capabilities for more locked-in, slop free controls, and easier battery change-outs.
  • 20° helical drivetrain with hardened steel pinion gear and CNC machined main gear.
  • Improved gear ratios of 9:1 and 9.75:1 to match today’s motor Kv market.
  • Adjustable motor mount for fine tuning gear mesh.
  • Steel-sleeved main gear hub eliminates middle bearing block wear.
  • True 6061-T6 CNC machined aluminum components
  • CNC machined aluminum triple main shaft bearing blocks
  • Narrowed tuff strut landing gear
  • Ball bearing supported pinion gear
  • Improved electronics placement and wiring options

Rotor Head:

Direct controlled 120 (degree) CCPM

Heavy duty linkages

9mm head axle

CNC machined aluminum swashplate

CNC machined main rotor grips

CNC machined main rotor head

High quality swashplate heim ball/ball bearing

Tail Rotor:

Full ball/thrust bearings

Graphite tail fin

CNC aluminum “open” gearbox

Carbon 22mm tail boom

Hardened tail rotor output shaft

Carbon/Aluminum boom supports and CNC machined aluminum boom clamps

Model Specifications:

Length: 52.5" (1333mm)

Height: Flybar - 6.5” (419mm)

Rotor Span: 1561-1601mm - 690-730mm blades

Tail Rotor Span: 286mm with 105mm T/R blades

Avg. Ready-to-Fly Weight: 11.5-12.5lbs - 5.22-5.67kg (w/batteries)

Main Rotor Blades: 690-730mm

Power: 12S, 490-560KV

€939.00

Inc. VAT
Miniature aircraft Whiplash 730E (FBL) - Super Combo

Miniature aircraft Whiplash 730E (FBL) - Super Combo

  • NEW aggressively-styled, stiffer frames with side-by-side battery mounting for better GC control
  • Increased cyclic and tail rate capabilities for more locked-in, slop free controls, and easier battery change-outs.
  • 20° helical drivetrain with hardened steel pinion gear and CNC machined main gear.
  • Improved gear ratios of 9:1 and 9.75:1 to match today’s motor Kv market.
  • Adjustable motor mount for fine tuning gear mesh.
  • Steel-sleeved main gear hub eliminates middle bearing block wear.
  • True 6061-T6 CNC machined aluminum components
  • CNC machined aluminum triple main shaft bearing blocks
  • Narrowed tuff strut landing gear
  • Ball bearing supported pinion gear
  • Improved electronics placement and wiring options
  • This is a super combo, including the following components
    Whiplash 730E Kit
    Blades 710( Mah/Edge/Rotortech). as stock allows
    Tail blades 105mm- brand depends on stock
    Scorpion Motor HK4035-500 OR 560kv
    ESC Tribunus II 12-130A
    (3) Cyclic SERVO Savox TG(1257/8) or KST 725/BLS 905
    (1) Tail Servo BLS905/MS525 or Savox 1290mg

€1699.00

Inc. VAT
Miniature aircraft Whiplash-G Gasser version II Flybarless Helicopter Kit

Miniature aircraft Whiplash-G Gasser version II Flybarless Helicopter Kit

Miniature aircraft Whiplash-G Gasser version II Flybarless Helicopter Kit

  •     Sturdy graphite main frame unit.
  •     All C/F parts are made from 100% carbon.
  •     CNC machined Delrin 117 tooth helical main gear
  •     High quality one way bearing Made in Germany
  •     High quality one way bearing hub, full ball bearings
  •     Heavy duty, high quality front tail drive gears Made in Germany
  •     High precise two-piece clutch bell with double ball bearing support
  •     Optional gear ratios
  •     True T6-6061 CNC machined aluminum components
  •     CNC machined aluminum triple main shaft bearing blocks
  •     Direct controlled 120 (degree) CCPM
  •     CNC machined aluminum boom clamps
  •     CNC machined aluminum engine mount
  •     Full ball bearings throughout
  •     High quality landing gear struts

Rotor Head:

  •     Full ball bearings
  •     Heavy duty linkages
  •     9mm head axle made from special high quality steel
  •     CNC machined aluminum swash-plate
  •     CNC machined main rotor grips
  •     CNC machined main rotor head
  •     High quality swash-plate heim ball/ball bearing
  •     High precise swash plate follower arms with 4 ball bearings each

Tail Rotor:

  •     Full ball/thrust bearings
  •     Tail Rotor hub made from special high quality steel
  •     Graphite tail fin
  •     CNC aluminum “open” gearbox
  •     CNC machined tail gears made from aluminum and POM
  •     Aluminum 22mm tail boom
  •     Precise running torque tube w. 3 ball bearings
  •     Hardened tail rotor output shaft
  •     High precise tail slider
  •     Carbon/Aluminum boom supports
  •     Carbon Tail Control Rod

Air Filter:

High Flow Air Cleaner X-cell

Canopy:

High Visibility Painted Epoxy-Glass Canopy

Specifications:

  •     Heli Length 52.5" (1343mm)
  •     Heli Height 17.25" (439mm)
  •     Rotor Span 1561-1621mm - 690-720mm blades
  •     Tail Rotor Span 286mm with 105mm T/R blades
  •     Avg. Ready-to-Fly Weight     12-13lbs - 5.6-6.2kg (less fuel)
  •     Main Drive Ratio   6.89:1 (7.3:1, 7.8:1 options)
  •     Tail Drive Ratio   4.67:1
  •     Main Rotor Blades    690-720mm
  •     Recommended Power   23-32cc R/C Style Gas Engine

€1219.00

Inc. VAT
Miniature aircraft Whiplash-G II Gasser version combo set with servos, engine..

Miniature aircraft Whiplash-G II Gasser version combo set with servos, engine..

Miniature aircraft Whiplash-G II Gasser version combo

Including

  • Miniature aircraft Whiplash-G II Gasser Kit  MA1033-3
  • 4  servos : 3x Savox 1257/8+ 1 x 1290 tail or KST (stock pending)
  • Zenoah Modified  Engine 240 (Balanced wheel , matched Piston, for reduced Vibrations). special made for Whiplash Gasser
    - Option 1 :Zenoah Modified Engine 270 (Balanced wheel , matched Piston, for reduced Vibrations) special made for Whiplash Gasser
    - Option 2 :Zenoah  Hanson 3D 290 modified special made for Whiplash Gasser
  • Main Carbon 710 mm blades, and tail Carbon blades 105mm
  • Original MA4000 Gasser Muffler

€1999.00

 
Miniature aircraft Whiplash-N II Nitro V2 Flybarless helicopter Kit

Miniature aircraft Whiplash-N II Nitro V2 Flybarless helicopter Kit

Miniature aircraft Whiplash-N II Nitro V2 - Kit version, no blades or electronics/motors included

Chassis:

  •     Sturdy graphite main frame unit.
  •     All C/F parts are made from 100% carbon.
  •     CNC machined Delrin 117 tooth helical main gear
  •     High quality one way bearing Made in Germany
  •     High quality one way bearing hub, full ball bearings
  •     Heavy duty, high quality front tail drive gears Made in Germany
  •     High precise two-piece clutch bell with double ball bearing support
  •     Optional gear ratios
  •     True T6-6061 CNC machined aluminum components
  •     CNC machined aluminum triple main shaft bearing blocks
  •     Direct controlled 120 (degree) CCPM
  •     CNC machined aluminum boom clamps
  •     CNC machined aluminum engine mount
  •     Full ball bearings throughout
  •     High quality landing gear struts

Rotor Head:

  •     Full ball bearings
  •     Heavy duty linkages
  •     9mm head axle made from special high quality steel
  •     CNC machined aluminum swashplate
  •     CNC machined main rotor grips
  •     CNC machined main rotor head
  •     High quality swashplate heim ball/ball bearing by original SKF
  •     High precise swash plate follower arms with 4 ball bearings each

Tail Rotor:

  •     Full ball/thrust bearings
  •     Tail Rotor hub made from special high quality steel
  •     Graphite tail fin
  •     CNC aluminum “open” gearbox
  •     CNC machined tail gears made from aluminum and POM
  •     Aluminum 22mm tail boom
  •     Positive control system
  •     Hardened tail rotor output shaft
  •     High precise tail slider
  •     Carbon/Aluminum boom supports

Canopy:

  •     High Visibility Painted Epoxy-Glass Canopy

Specifications

  • Heli Length :    52.5" (1333mm)
  • Heli Height :   17.5" (445mm), Flybarless - 17" (432mm)
  • Rotor Span : 1561-1601mm - 690-710mm blades
  • Tail Rotor Span: 286mm with 105mm T/R blades
  • Avg. Ready-to-Fly Weight: 10-11lbs - 4.5-5kg (less fuel)
  • Main Drive Ratio : 8.35 : 1 7.8 : 1 (optional) 7.3 : 1 (optional)
  • Tail Drive Ratio : 4.66:1
  • Main Rotor Blades : 690-710mm
  • Recommended Power : .90 to 120 size glow

€990.00

Inc. VAT