T-REX Electric

T-REX 760X 3D DOMINATOR TOP Super Combo Align RC Helicopter

The new models include all the current design updates from their previous releases that brings the whole T-REX family together.

• New 700EFL Rotor Head, Super low CG
• New 760 Main Blades & 105 Tri-Tail Blades
• Narrow Body Design / Split-type of Main Frame
• DS820M/DS825M High Voltage Brushless Servo
• Powerful 850MX 490KV Motor
• Brand New Platinum HV 160A V4 ESC

Specifications

• Length: 1390mm
• Height: 360mm
• Width: 195mm
• Main Blade Length: 760mm
• Main Rotor Diameter: 1702mm
• Tail Rotor Diameter: 287mm
• Motor Drive Gear: 12T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 102T
• Tail Drive Gear: 23T
• Drive Gear Ratio: 9.33:1:4.43
• Weight (w/o Battery): Approx. 3750g

Package Includes

• 1x T-REX 760X 3D Dominator Kit
• 2x 760 Carbon Fiber Blade
• 2x 105mm 3K Carbon Fiber Tail Blade
• 1x 850MX Brushless Motor (490KV)
• 3x DS820M HV Brushless Servo
• 1x DS825M HV Brushless Servo
• 1x Platinum HV 160A V4 Brushless ESC
• 1x MICROBEAST Plus Flybarless System

Required for Assembly (NOT INCLUDED !)

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 2x 6S Li-Po 4500 ~ 5200mAh
• 1x Digital Pitch Gauge

Click here to see our Lipo Batteries

Click here to see our Transmitters and Receivers

Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
Attitude Auto-level Mode & Rescue Mode.
Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
BL Heli ESC allows faster motor feedback and precise flying performance.
Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
Built-in Receiver: Futaba S-FHSS 2.4GHz System.
Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
Rigidity Main Frame.
Fully metal CNC CCPM Swashplate.
New tail motor plug mount makes maintenance easy.

Specifications:

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Weight (w/o Battery): 53g

Content:

• 1x T-REX 150X DFC
• 2x Main Blade (1 Set)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Remote Extension
• 1x 7.4V Li-Po 250mAh Li-Polymer Battery

Required for assembly:
1x Transmitter (min. 6-CH, Futaba S-FHSS System compatible)
1x Charger

Align T-REX 150X DFC Super Combo - BTF (incl. DSMX Remote RX)

Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
Attitude Auto-level Mode & Rescue Mode.
Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
BL Heli ESC allows faster motor feedback and precise flying performance.
Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
Built-in Receiver: Futaba S-FHSS 2.4GHz System.
Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
Rigidity Main Frame.
Fully metal CNC CCPM Swashplate.
New tail motor plug mount makes maintenance easy.

Specifications:

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Weight (w/o Battery): 53g

Content:

• 1x T-REX 150X DFC
• 2x Main Blade (1 Set)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo (Upper/Lower Plastic Servo Case)
• 2x DS150 Digital Servo (Upper/Lower Plastic Servo Case)
• 1x Remote Extension
• 1x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x Spektrum DSMX Remote Receiver

Brand new Align T-REX 150X DFC Super Combo - BTF 150  WITH  GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.

• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.

Specifications

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Weight (w/o Battery): 53g

Content

• 1x T-REX 150X DFC
• 4x Main Blade
• 2x Tail Blade
• 1x 150M Main Motor
• 1x 150M Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Bind Plug
• 1x Remote Extension
• 2x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g)
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x CH150 Li-Po Charger

Required for assembly
1x ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or 1x JR DSM2/DSMJ/DMSS / Spektrum DSM2 2.4GHz Transmitter

Align T-REX 150X DFC Super Combo - BTF (incl. DSMX Remote RX)

Brand new 150 GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.
Attitude Auto-level Mode & Rescue Mode.
Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
BL Heli ESC allows faster motor feedback and precise flying performance.
Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
Built-in Receiver: Futaba S-FHSS 2.4GHz System.
Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
Rigidity Main Frame.
Fully metal CNC CCPM Swashplate.
New tail motor plug mount makes maintenance easy.

Specifications:

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Weight (w/o Battery): 53g

Content:

• 1x T-REX 150X DFC
• 4x Main Blade (2 Sets)
• 1x Tail Blade
• 1x 150M Brushless Main Motor
• 1x 150MT Brushless Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Bind Plug
• 1x Remote Extension
• 2x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g)
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x CH150 Li-Po Charger
• 1x Spektrum DSMX Remote Receiver

Required for assembly:
1x Transmitter (min. 6-CH, Spektrum DSM2/DSMX or Futaba S-FHSS compatible)

Align T-REX 150X TA Super Combo

Aligns smallest and most petite 3D helicopter T-Rex 150X, carries the same superior pedigree and design concept that originated from the successful T-Rex line of helicopters.
Featuring strong power, superior flight control stability, and equipped with high end components, far exceeding any other helicopters currently on the market.
Integrate 6-aix gyro, receiver, ESC and Bluetooth controlling system.
Set up and update the flight parameter settings via APP Interface.
Support for mobile devices, iOS & Android allows easy set up and adjustment to flight parameter settings.
The APP makes firmware updates easier to install. Download the FREE APP to get the latest firmware update with additional improved functions.
Main motor KV value is increased to 9000KV to deliver outstanding power, torque, and high efficiency with low power consumption delivering outstanding performance.
The tail motor provides superior tail authority out performing all other micro helis on the market.
ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels.
The stick and holder are designed based on ergonomic bringing much smoother control.
Completed function with the mode of helicopter / aircraft / multicopter.
Logical and simple control interface, and easy to set up.
Miniature size, control precision that resembles the larger helicopters, enables you to enjoy flying inside a confined space.
Beginners can even enjoy this with ease by just turning down the speed.
The innovative breakthrough T-Rex 150X will bring you a new dimension of flying enjoyment.

Features T-REX 150X TA

Integrate 6-aix gyro, receiver, ESC and Bluetooth controlling system.
Set up and update the flight parameter settings via APP Interface.
Support for mobile devices, iOS & Android allows easy set up and adjustment to flight parameter settings.
The APP makes firmware updates easier to install.
Download the FREE APP to get the latest firmware update with additional improved functions.
It adopts high precision CNC metal assemble with high end aesthetics and superior flight performance.
Adopt industrial rich-fiber PA material improves the strength and hardness by three times over the original.
The new material increases the thickness of the frame structure, reduces warpage, and abrasion while improving impact resistance.
4G digital micro servos are specially design for the T-REX 150X to increase micro helicopter control speed, precision, and torque output.
150X all metal CNC CCPM swashplate adopts specific embedded technology for fixing bearings, improves the structure strength, and zero slop.
The swashplate can withstand 40kg of tension which significantly enhances its durability and lifetime.
Main motor KV value is increased to 9000KV to deliver outstanding power, torque, and high efficiency with low power consumption delivering outstanding performance.
The tail motor provides superior tail authority out performing all other micro helis on the market.
The new upgraded anti-impact nylon skids improve its toughness, providing the ability to withstand any hits or impacts!
The Li-po battery uses a series/balancing design, resulting in efficiency and high discharge capabilities due to machine inspection to match cells.
To deliver outstanding flight performance the main blades are manufactured with high-strength industrial fiber composite material with an added aluminum sleeve to decrease torsional stress, and improving durability.
New tail motor plug mount makes maintenance easy.
For ease of control the T-REX 150 is equipped with Attitude Mode.
Enable Attitude Mode to avoid flip overs during flight. Flip a switch takes over to keep the heli at a level position.
These new features make learning to fly more enjoyable, allowing you to practice more flight maneuvers, speeds your ability to learn, and boost flying skills. Fly with Confidence!
Equipped dual output function, it allows two batteries charging with 1A current in the same time.
Balance charging is good to prevent the situation of over-charging or under-charging for a single cell.
Auto-detected charge status display.
The auto-detected function of low voltage for power storage.
Reverse polarity protection and short circuit protection.
Brand new 150 carry box is special design for T-REX 150 helicopter, features easy to carry and storage, this attractive small box can be storage a helicopter and its necessary flying parts which included 6 batteries, 3 hexagon screw drivers, 2 pair main blades, charger and a small parts box, you can easy and clear to know inside situation just need a glance at its transparence cove.

Features A10 Transmitter:

Automatic Frequency Hopping Digital System, AFHDS is a highly developed remote signal transmission system, providing long range, minimizing interference, with lower power consumption.
The frequency range of the system is 2.408 ~ 2.475 GHz.
The wave band is separated from 160 independent frequencies.
The transmitter uses 16 different frequency and 160 different frequency hopping algorithms.
Each time the transmitter is powered on a different frequency hopping scheme is used allowing the transmitter to avoid interference of the transmission signal.
Each transmitter has unique ID code when binding to the receiver, the receiver saves this unique ID code and only accepts a signal transmitted by the saved ID code transmitter.
This process avoids receiving another transmitter signals and significantly enhance the anti-interference ability and security.
A roll style slider is used to scroll through menu options providing a quick setup.
20 models memory with either Chinese or English interface, three aircraft options (helicopter/airplane/multicopter), Modes 1-4 available with optional direction output, set buzzer warnings, and supported firmware upgrade.
Up to four electronic timmers. Ergonomic design for comfortable feel and smoother control. The transmitter case is matte black with spined red control sticks to give a unique, and stunning look.
This system uses a high-quality gain antenna covering the entire available bandwidth. With high sensitivity receiver, the system can effectively avoid long-distance transmission signal interference.
Adopted low power rated electronics and a highly sensitive receiver chip. The transmitter frequency module uses an intermittent transmission signal to reduce transmission power and increase battery life dramatically. Provided charging port, simulator support, and firmware update ability.

Specifications T-REX 150X TA:

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Drive Gear Ratio: 1:7.8
• Weight (w/o Battery): 55g

Specifications A10 Transmitter:

• Channels: 10
• Modulation: 2.4GHz AFHDS 2A
• Support Models: Helicopters, Multicopters and Fixed Wing Aircrafts
• Frequency: 2.408 ~ 2.475 GHz
• Transmission Distance: <1000M (In wide and no RF interference places)
• Input Voltage: 4.0V ~ 6.0V
• Weight: 485g (w/o battery)
• Dimensions: 275x187x102mm

Content:

• 1x T-REX 150X DFC
• 2 Sets Main Blade
• 1 Set Tail Blades
• 1x 150M Main Motor (9000KV/1107)
• 1x 150M Tail Motor (8000KV/1103)
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Remote Extension
• 2x 7.4V Li-Po 300mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g) x 2
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x A10 Radio Control System
• 1x CH150X Li-Po Charger

Align T-REX 300X DOMINATOR Super Combo - RTF

Align newly designed T-REX 300X RTF (Ready to Fly), pre-assemble and combo with ALIGN A10 transmitter 10 channels 2.4GHz system and MiniGRS gyro makes flying much easier.
T-REX 300X, small but all-in-perfect. It adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. Narrow body design makes mechanical structure much stronger. The battery slider and top-mounted motor design with anodized bright red color brings pretty texture on this model. Thicken aluminum alloy tail boom for the best torsion resistance and increase the tail support rod lifetime. The progressive lightweight landing skid making this model the leader in this class. Plus the fiberglass painted canopy features lightweight and low in wind resistance. text by fw
T-REX 300X equipped with MiniGRS flybarless system special designed for ALIGN small helicopters (Under 500 series). It's light and simple with easy and quick settings, suitable for most pilots and beginners. Also the standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. Allow to provide consistent power output and keep stable RPM in non-stop 3D flying presenting perfect performance. Also it pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.
T-REX 300X RTF is tiny but everything all-in-one so that can perform well in not only in-door show but also outdoor 3D flights. This model offers you the best bargain price allow you to have fun flying at any time. text by fw

Specifications:

• Length: 476mm
• Height: 158mm
• Width: 88mm
• Main Blade Length: 230mm
• Main Rotor Diameter: 525mm
• Tail Rotor Diameter: 143mm
• Motor Pinion Gear: 14T
• Main Drive Gear: 115T
• Main Drive Pulley: 40T
• Tail Drive Gear: 13T
• Drive Gear Ratio: 8.21:1:3.08
• Weight (w/o battery): 418g

Specifications A10 Transmitter:

• Channels: 10
• Available Models: Helicopter / Airplane / Multicopter
• Frequency range: 2.408 ~ 2.475 GHz
• Power: no higher than 20dBm (for EU)
• System Mode: AFHDS 2A
• Suitable Voltage Range: 4.0 ~ 6.0V DC
• Receiving Distance: the open ground no interference < 1000M
• Low Voltate Warning: Lower than 4.2V
• Weight: 485g (excluded battery)
• Size: 275x187x102mm

Specifications MiniA.BUS Receiver:

• Channel: 14 channels
• RX Sensitivity: -105dBm
• RF Range: 2.4055 ~ 2.475 GHz
• System Mode: 2.4G system AFHDS 2A
• Power: 4.0 ~ 8.4V DC
• Transmit Distance: In open space without interference <150M

Specifications MiniGRS Flybarless System:

• Operating voltage range: DC 3.5~8.4V
• Operating current consumption: <100mA @ 4.8V
• Rotational detection rate: ±300°/sec
• Rudder yaw detection rate: ±600°/sec
• Sensor resolution: 12 BIT
• Swashplate Support: 120° CCPM Swashplate
• Mode Support: T-REX 250, T-REX 300, T-REX 450, T-REX 470, T-REX 500
• Receiver Support: ALIGN A.BUS, Futaba S-FHSS S.BUS, Spektrum DSM2/DSMX remote receiver
• Operating temperature: -20℃ ~ 65℃
• Operating humidity: 0% ~ 95%
• Size: 37.6x22.4x13mm

Specifications RCC-3X Charger:

• Input Voltage: AC 100V~240V (50/60Hz)
• Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
• Supported Battery Type: Li-polymer / Li-ion
• Charging Method: CC/CV
• Charging Current: 2A
• Size: 123x74.3x32mm
• Weight: 260g

Specifications Battery:

• Output: 11.1V 1300mAh 14.4Wh (3S1P)
• Supports 5C charging
• Dimension: 74x36.5x21mm
• Weight: 115g

Content:

• 1x T-REX 300X DOMINATOR Kit
• 1x MiniGRS Flybarless System
• 2x 230 Carbon Fiber Blades
• 2x 50 Tail Blade
• 1x RCE-BL25A 25 Brushless ESC
• 1x 300MX Brushless Motor(3700KV/2216)
• 3x DS450 Digital servo
• 1x DS455 Digital servo
• 1x A10 Radio Control System Combo
• 1x MiniA.BUS Receiver
• 1x Balance Charger RCC-3SX
• 1x 3S1P 11.1V 1300mAh / 30Ch

T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts and solve the problem of assembly and adjustment, Align introduced T-REX 450LP ARTF (Almost Ready to Fly). Completed with Align A10 transmitter and newly released Mini GRS flybarless system, just easy to experience the fun fly enjoyment.

The helicopter utilizes DFC rotor, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. Without any adjustment or tuning, this combo will be provided optimal stability suitable for pilot of all levels.

Equipped with newly digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with newly RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.

ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multi copter. Logical and simple control interface, and easy to set up.

With the addition of the brand new A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.

FEATURES:

AFHDS:
1. Automatic Frequency Hopping Digital System, AFHDS is a highly developed remote signal transmission system, providing long range, minimizing interference, with lower power consumption.
2. The frequency range of the system is 2.4055 ~ 2.475 GHz. The wave band is separated from 160 independent frequencies. The transmitter uses 16 different frequency and 160 different frequency hopping algorithms. Each time the transmitter is powered on a different frequency hopping scheme is used allowing the transmitter to avoid interference of the transmission signal.
3. Each transmitter has unique ID code when binding to the receiver, the receiver saves this unique ID code and only accepts a signal transmitted by the saved ID code transmitter. This process avoids receiving another transmitter signals and significantly enhance the anti-interference ability and security.

A roll style slider is used to scroll through menu options providing a quick setup.
20 models memory with either Chinese or English interface, three aircraft options (helicopter/airplane/multicopter), Modes 1-4 available with optional direction output, set buzzer warnings, and supported firmware upgrade.

Up to four electronic timmers. Ergonomic design for comfortable feel and smoother control. The transmitter case is matte black with spined red control sticks to give a unique, and stunning look.

Heli:

Equipped with the DFC flybarless head designed for extremely low CG to minimize wind resistance while providing an enhanced direct control feel. As a standard feature, the new main rotor head block and spindle design is included. New designed 325 3D main rotor blades are stable and agile resulting in improved flight performance for the beginner or 3D pilot.

Align has over 25 years of experience with motor core technical knowledge. Based on 3s 11.1V the 460MX (3200KV) motor is specifically designed for the T-REX 450L Dominator, featuring superior efficiency, high power output, extreme torque, low current, and low operating temperature. The 460MX motor shares the same extraordinary engineering design features as the 850MX Dominator motor.

Three programmable throttle speed settings for quick throttle response control. Adjustable BEC output voltage (5~8.5V), auto power detection system suitable for 2S~6S Li battery, a continues 3A current rating, a burst rating of 6A, continuous current 45A and a surge current 60A for 15 seconds.

New CNC metal reinforcement main frame brace is installed with the frame mounting bolts increasing the main frame strength to improve flight stability for the beginner or the 3D pilot. The solid reinforcement of the frame is easily felt during extreme 3D maneuvers. Also, the stylish appearance of red anodized and silver color frame brace enhances the high-end appearance of the T-REX 450L.

Carbon main frames utilizes composite integration technology to embed the battery mounting rails directly into the frames. This high-end manufacturing process allows for the clever use of open space in the frame body for a more rigid frame structure to improve flight performance. The T-REX 450L cleverly expands on the core concepts of the T-REX 450Pro design to continue our design excellence.

Designed with direct to swash control, and a one-piece main bearing block with integrated servo mounts for simplified servo installation is aesthetically pleasing. New dual bearing design DS450 servos minimize deadband and increase longevity feature improved torque and speed.

New sliding battery tray with locking system and frame integrated mounting rail provides easy battery access. The design also provides extra battery protection.

New anti-rotation guide with embedded anti-wear material to minimize the wear between the swashplate long ball and the guide.

Horizontal rudder servo mount designed for improved center of gravity (CG) to enhance Beginner or 3D flying.

Included tail boom support bridge to increase the rigidity of the overall tail boom to improve control.

Brand new tail blade grips which utilize thrust bearings to improve rudder precision control while increasing the life of the bearings. New 65 mm tail rotor blades combined with the 360mm main rotor blades contribute to improved tail authority.

New dual tail sider support assembly for a slop free tail to improve rudder resolution and control.

Mini GRS:

1. Special design for ALIGN small helicopters. It's light and simple.
2. Support the latest new ALIGN A10 Radio (10-channel/A.BUS system) for the best working operation.
3. Support T-REX 250/450/470/500 models, no need to setup, outstanding flight performance for the beginner or 3D pilot.
4. Support JR DSM2 and Spektrum DSM2/DSMX satellite. Built-in Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.

Balance Charger RCC-3SX:

1. Suitable for international AC 100V~240V.
2. Voltage balancing charging is suitable for 2S 7.4V and 3S 11.1V lipo batteries.
3. Automatically correct out of balanced cells, and automatically charge cells with low voltage.
4. Auto-detected charge status display. (Red light: while charging Green light: end of charging)
5. Reverse polarity (warning beep) and built-in short protection.
6. Aluminum alloy shell with an internal cooling fan for effective heat dissipation.

3S1P 11.1V 2200mAh/30C Battery:

1. Cells are inspected to ensure matching cells are used during manufacturing to ensure high-performance battery production. The best choice for the T-REX 450 helicopter series or other models such as airplanes and cars.
2. Max Continuous Discharge: 30C(66A), Burst Discharge: 40C(88A). Normal operating temperature is approx. 40-65°C (within 80% of rated discharge). Max. Temperature: 80°C.

Content:

• A10 Transmitter x 1
• A6B Receiver x 1
• RCE-BL45P ESC x 1
• 460MX Brushless motor(3200KV/2222) x 1
• DS450 Digital servo x 3
• DS455 Digital servo x 1
• MINIGRS Flybarless System x 1
• Balance Charger RCC-3SX x 1
• 3S1P 11.1V 2200mAh/30C Battery x 1
• T-REX 450L Kit x 1

A10 Specifications:

• Channel: 10-Channel
• Available Models: helicopter/airplane/multicopter
• Frequency range: 2.4055 ~ 2.475 GHz
• Power: no higher than 20dBm
• System Mode: 2.4G system AFHDS 2A
• Suitable Voltage Range: 4.0 ~ 6.0V DC
• Receiving Distance: the open ground no interference < 1000M
• Low Voltate Warning: Lower than 4.2V
• Weight: 487g (excluded battery)
• Size: 187x89.6x215mm

MINI GRS Specifications:

• Operating voltage range: DC 3.5~8.4V
• Operating current consumption: <100mA @ 4.8V
• Rotational detection rate: ±300°/sec
• Rudder yaw detection rate: ±600°/sec
• Sensor resolution: 12 BIT
• Swashplate Support: 120° CCPM Swashplate
• Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
• Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
• Operating temperature: -20℃ ~ 65℃
• Operating humidity: 0% ~ 95%
• Comply with RoHS
• Size: 37.6x22.4x13mm

Balance Charger RCC-3SX Specifications:

• Input Voltage: AC 100V~240V(50/60Hz)
• Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
• Supported Battery Type: Li-polymer / Li-ion
• Charging Method: CC/CV
• Charging Current: 2A
• Size: 123x74.3x32mm
• Weight: 260g

Battery Specifications:

• Output: 11.1V 2200mAh 24.4Wh(3S1P)
• Supports 5C charging
• Dimension: 104x36x22mm
• Weight: 165g
• 14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A

T-REX 450L Specifications:

• Length: 705mm
• Height: 205mm
• Width: 110mm
• Main Blade Lenght: 325mm
• Main Rotor Diameter: 734mm
• Tail Rotor Diameter: 171mm
• Motor Drive Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 106T
• Tail Drive Gear: 26T
• Drive Gear Ratio: 11:1:4.07
• Weight(w/o battery): 730g

Included:

• T-REX 450L Kit Set x 1 set
• MINIGRS Flybarless System x 1 set
• A10 Transmitter x 1
• 325 Carbon Fiber Blades x 1 set
• RCE-BL45P ESC x 1
• 460MX Brushless motor(3200KV/2222) x 1
• DS450 Digital servo x 3
• DS455 Digital servo x 1
• 3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
• Balance Charger RCC-3SX x 1 set
• 1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:

• 1.Dial Pitch Gauge or Digital Pitch Gauge
• 2.Swashplate Leveler

Align T-Rex 470LM Dominator Super Combo

This is the all new T-Rex 470LM from Align, with all the best and optimal feature of a small size T-Rex model:

• Brand New Belt Drive  Assembly
• Brand New 470EFL Main Rotor Head Set
• Support 380 Main Blade / 69 Tail Blade
• Progressive Landing Skid with 5 degree tilted forward
• New DS450M/DS455M High Voltage Brushless Servo
• New RCE-BL50X Brushless ESC
• New 3rd Main Shaft Bearing Block design
• Brand New Tail Rotor Holder

Align T-REX 470LP Dominator Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Aligns most anticipated helicopter release in 2016 the T-REX 470L is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw.
This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Main Drive Pulley: 56T
• Tail Drive Gear: 15T
• Drive Gear Ratio: 11:1:3.73
• Weight (w/o battery): 840g

Content:

• 1x Align T-Rex 470LP Dominator Kit
• 2x 380 Carbon Fiber Blade
• 2x 69 Carbon Tail Blade
• 1x RCE-BL50X 50A Brushless ESC
• 1x 470MX Brushless Motor (1800KV)
• 3x DS450 Digital Servo
• 1x DS455 Digital Servo

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V LiPo 1400~1900mAh

Align T-REX 470LP Dominator KIT

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Aligns most anticipated helicopter release in 2016 the T-REX 470L is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw.
This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Main Drive Pulley: 56T
• Tail Drive Gear: 15T
• Drive Gear Ratio: 11:1:3.73
• Weight (w/o battery): 840g

Content:

• 1x T-REX 470LP DOMINATOR Kit
• 2x 380mm Carbon Fiber Blade
• 2x 69mm Carbon Tail Blade
• 1x 470MX Brushless Motor (1800KV)
• 1x RCE-BL50X 50A Brushless ESC

Required for assembly:

• 1x Transmitter (6-channel or more,helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 1400~1900mAh battery
• 1x Flybarless System
• 3x Swashplate Servo
• 1x Tail Servo

Align T-REX 470LP Dominator Super Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Aligns most anticipated helicopter release in 2016 the T-REX 470L is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw.
This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to 8.4V, high voltage input, improving the servos torque and speed. The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Main Drive Pulley: 56T
• Tail Drive Gear: 15T
• Drive Gear Ratio: 11:1:3.73
• Weight (w/o battery): 840g

Content:

• 1x Align T-Rex 470LP Dominator Kit
• 2x 380 Carbon Fiber Blade
• 2x 69 Carbon Tail Blade
• 1x RCE-BL50X 50A Brushless ESC
• 1x 470MX Brushless Motor (1800KV)
• 3x DS450 Digital Servo
• 1x DS455 Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V LiPo 1400~1900mAh

Align T-REX 470LT Dominator Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Align's most anticipated helicopter release in 2016 the T-REX 470LT is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470LT has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470LT is equipped with the large outer diameter 470MX motor (1800KV/2818) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed.
The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.
T-REX 470LT is designed with 380mm main blade and torque drive system, which makes it more stable and more powerful.
Its superior tail lock performance and flying control feel is super and way beyond your imagination.

Features:
New 470 canopy features in aerodynamic design with durable fiber lightweight material providing the best protection in flight.
The new canopy, its enlarge clean-cut outfit makes the overall body shape more balance and stylish.
Extended 380mm main blades effectively improve the flying stability and power performance.
The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight.
New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.
Brand new 470 V2 Main Rotor Holder allow to provide the best stability and precise control no matter you are flying in static flight or 3D dynamic flight.
Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from 5mm to 6mm, while the Feathering Shaft outer dimension increased from 4mm to 5mm,effectively strengthening the Main and Feathering Shaft while improving durability.
New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
470MX motor is designed for 3D flight.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame.
This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.
DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.
A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 28T
• Drive Gear Ratio: 11:1:3.71
• Weight (w/o battery): approx. 871g

Content:

• 1x T-REX 470LT DOMINATOR Kit
• 2x 380mm Carbon Fiber Main Blade
• 2x 69mm Carbon Fiber Tail Blade
• 1x 470MX Brushless Motor (1800KV/2818)
• 3x DS450M Digital Servo
• 1x DS455M Digital Servo
• 1x RCE-BL50X 50A Brushless ESC

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V Li-Po 1400mAh~1900mAh
• 1x Battery Charger

Align T-REX 470LT Dominator Super Combo

Following the release of the T-REX 450L, which introduced an innovative design and came equipped with high-end electronic equipment.
Align's most anticipated helicopter release in 2016 the T-REX 470LT is born.
No matter whether you are a newcomer or a professional, the brand new T-REX 470LT will give you the new flying feel again.
470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm.
The 470LT has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery.
The 470L utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX 470L more avant-garde and dynamic.
The T-REX 470LT is equipped with the large outer diameter 470MX motor (1800KV/2818) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor.
The brand new DS450 digital cyclic servos and DS455 digital tail servo, support up to V8.4, high voltage input, improving the servos torque and speed.
The new RCE-BL50X brushless ESC with an internal BEC provides 5.0V to 8.4V which can be set based on servo specification.
The new high-end electronics effectively enhance flight performance.
T-REX 470LT is designed with 380mm main blade and torque drive system, which makes it more stable and more powerful.
Its superior tail lock performance and flying control feel is super and way beyond your imagination.

Features:
New 470 canopy features in aerodynamic design with durable fiber lightweight material providing the best protection in flight.
The new canopy, its enlarge clean-cut outfit makes the overall body shape more balance and stylish.
Extended 380mm main blades effectively improve the flying stability and power performance.
The new engineered airfoil design effectively reduces turbulence at the end of the main blades,this saves power consumption during extreme 3D flight.
New 69 size tail blades are longer in length and offer superior tail holding performance, even during demanding 3D flight.
Brand new 470 V2 Main Rotor Holder allow to provide the best stability and precise control no matter you are flying in static flight or 3D dynamic flight.
Brand New 470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response.
Brand New 470 Main Shaft and Feathering Shaft: Main Shaft outer dimension increased from 5mm to 6mm, while the Feathering Shaft outer dimension increased from 4mm to 5mm,effectively strengthening the Main and Feathering Shaft while improving durability.
New 470MX motor features; high efficiency, superior power, excellent torque, low current draw, and a low operating temperature. The 470MX is capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
470MX motor is designed for 3D flight.
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.
Carbon fiber side frame plates are manufactured using a proprietary composite material integration technology which integrates the battery mounting rails into the frame.
This unique use of open spaces within the frame creates a rigid frame and is aesthetically pleasing.
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.
Brand new latching battery tray which utilizes integrated mounting rails inside the frames to simplify insertion / removal of battery while providing protection for the battery.
Specially designed for T-REX 470 providing higher currency output and support for high voltage servos with an internal BEC output from 5V to 8.4V which can be set up based on servo specification.
DS350M HV Cyclic and DS455 HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.
Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.
Landing skid is tilted 5 degrees forward to improve crashworthiness.
Newly designed vertical tail servo mount to improve CG while increasing the responsiveness of 3D flight.
A wider Tail Boom to improves the torsional strength. Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.
Designed using a proprietary material integration technology which creates a unique look and improves the Vertical Stabilizer's stiffness.
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder resolution and precision.
The new tail rotor holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of the tail performance when using 69 size Tail Blades.

Specifications:

• Length: 755mm
• Height: 210mm
• Width: 108mm
• Main Blade Length: 380mm
• Main Rotor Diameter: 850mm
• Tail Rotor Diameter: 181mm
• Motor Pinion Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 28T
• Drive Gear Ratio: 11:1:3.71
• Weight (w/o battery): approx. 871g

Content:

• 1x T-REX 470LT DOMINATOR Kit
• 2x 380mm Carbon Fiber Main Blade
• 2x 69mm Carbon Fiber Tail Blade
• 1x 470MX Brushless Motor (1800KV/2818)
• 3x DS450M Digital Servo
• 1x DS455M Digital Servo
• 1x RCE-BL50X 50A Brushless ESC
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Battery 6S 22.2V Li-Po 1400mAh~1900mAh
• 1x Battery Charger

Align T-REX 500X Dominator Combo (DS530M/DS535M)

The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80X:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 7.4V ~ 22.2V
• Supporting battery types: 2S ~ 6S LiPo/LiIon
• BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
• BEC Output current: continuous 5A / surge 7A

Specifications DS530 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530/DS535 digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Pinion Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight(w/o battery): approx. 1400g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-REX 500X Dominator Super Combo (DS530/DS535)

The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80X:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 7.4V ~ 22.2V
• Supporting battery types: 2S ~ 6S LiPo/LiIon
• BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
• BEC Output current: continuous 5A / surge 7A

Specifications DS530 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-REX 500X Dominator Top Combo (DS530M/DS535M)

The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight responsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushless Motor (1600KV / 3527)
New 520MX motor features high efficiency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminum CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (high Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strengthen main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80A:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 11.1V ~ 22.2V
• Supporting battery types: 3S ~ 6S LiPo/LiIon
• BEC Output voltage: 5 ~ 8.4V 
• BEC Output current: continuous 10A / surge 25A

Specifications DS530 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-REX 500X Dominator Top Combo (DS530M/DS535M)

The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80X:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 7.4V ~ 22.2V
• Supporting battery types: 2S ~ 6S LiPo/LiIon
• BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
• BEC Output current: continuous 5A / surge 7A

Specifications DS530 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-REX 500X Dominator Top Super Combo (DS530M/DS535M)

The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature. Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

New RCE-BL80X 80A Brushless ESC
Specially designed for T-REX 500X providing higher currency output and support for high voltage servos with an internal BEC output from 6V to 8.4V which can be set up based on servo specification.

Adjustable Belt Guide Pulley
Innovative adjustable belt guide pulley, allows a convienient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Brand new Belt Drive Assembly
Brand new Belt Drive Assembly design allow for quiet operation and low cost on serviceability.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flight stability and power performance. Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor. The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame. This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure. In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80X:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 7.4V ~ 22.2V
• Supporting battery types: 2S ~ 6S LiPo/LiIon
• BEC Output voltage: 2x 6V ~ 8.4V (Dual BEC)
• BEC Output current: continuous 5A / surge 7A

Specifications DS530 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535 HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-REX 500X Dominator Top Super Combo (DS530M/DS535M)

Experienced in numerous of innovations, the brand new T-REX 500XT is now ready to go.
More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500XT model ever.
The New Torque Drive System; The Better Performance Advantage.
Refresh and refine, T-REX 500XT adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision.
A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter.
The T-REX 500XT main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design.
The 500XT utilizes a new torque drive assembly, highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
T-REX 500XT landing skid is tilted 5 degrees forward to improve crashworthiness.
T-REX 500XT utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor.
The latest new RCE-BL80A Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power.
The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.
Equipped with all the top end electronic devices, T-REX 500XT is as stable and powerful like the large scale helicopters.
It is about to re-define the 500-class helicopters in your mind.

470 Main Blade
New extended 470mm main blades for T-REX 500X effectively improve the flying stability and power performance.
Enhance the power for better control allow to enjoy T-REX 500X flights same like other large size helicopters.
New 78 size tail blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Brand New 500EFL Main Rotor Head Set
The brand new low CG 500EFL Flybarless Rotor Head System utilizes the precision grinding of high-carbon steel hollow shaft effectively increase its concentricity.
Allow to reduce resistance during 3D maneuvers, increased flight reponsiveness and precision.
In addition, the style appearance harmony with red anodized and stainless color, bring out the high quality just like 700 size 3D helicopter.

New Swashplate (Gigh Stability & Zero Slop)
New Swashplate design with precise bearings features in zero slop delivering a precise and accurate controlled flight.

520MX Brushles Motor (1600KV / 3527)
New 520MX motor features high efficency, superior power, excellent torque, low current draw, and low operating temperature.
Allow to provide maintaining consistent torqque and head speed through continuous 3D maneuvers.

CNC Metal Shapely Reinforcement Plate And Brace Assembly
Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from structure.
In addition, the styling appearance harmony with red anodized and stainless color bring out the high tactile appeal.

The 3rd Main Shaft Bearing Block
An additional 3rd main shaft bearing block increases the strength of the main frame while improving 3D flight.

Quick release battery mounting plate
Brand new latching battery tray which utilizes integrated mounting rails inside the frame to simplify insertion / removal of battery while providing protection for the battery.

High Voltage Servos
DS530M HV Cyclic and DS535M HV Rudder servos support up to 8.4V for superior responsiveness, extreme torque, and improved performance.

500 Slant Thread Main Drive Gear Set
Utilize of Strenghten main gear case features in using larger bearing has a higher load carry capacity which reduces the loss of momentum and improves the efficency, speed and smoothness of the main rotor.
The new main gear case and all-metal central pulley transmission system is an efficent design to deliver the ultimate performance.

Progressive Lightweight Landing Skid
Landing Skid is tilted 5 degrees forward to improve crashworthiness.

500 Tail Boom
A 19mm wide Tail Boom to improves the torsional strength.

Tail Control Unit
The newly designed dual point supported tail control assembly delivers slop free performance while improving rudder and precision.

Brand New Tail Rotor Holder
The new Tail Rotor Holder design includes thrust bearings which increases durability, as well as significantly improving the accuracy and efficiency of tail performance when using 78 size Tail Blades.

78 Tail Blade
New 78 size Tail Blades are longer in length and offer superior and precise tail holding performance, even during demanding 3D flight.

Special Qualified Washer
Advanced Aluminium CNC cutting manufactures, clean aesthetic perfectly exhibits the helicopters exclusiveness.

1.6mm 3K Carbon Fiber Main Frame
Carbon fiber side frame plates are manufactured using proprietary composite material integration technology which integrates the battery mounting rails into the frame.
This unique use of open space within the frame vreates a rigid frame and is aesthetically pleasing.

Carbon Fiber Tail Control Rod Assembly
Carbon Fiber Tail Control Rod is practical and improves the helicopters tail control.

Specifications:

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Drive Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight (w/o power system): 1400g

Specifications RCM-BL520MX:

• Input voltage: 22.2V (6S LiPo)
• KV value: 1600
• Continuous current: 85A
• Surge current: 130A (2 sec)
• Continuous Output power: 1900W
• Surge Output power: 2750W (2 sec)
• Stator dimension: 3527
• Stator arms: 9
• Magnet Poles: 6

Specifications RCE-BL80A:

• Continuous current: 80A
• Surge current: 100A
• Supporting Input voltage: 7.4V ~ 22.2V
• Supporting battery types: 2S ~ 6S LiPo/LiIon
• BEC Output voltage: 6V ~ 8.4V
• BEC Output current: continuous 5A / surge 7A

Specifications DS530M HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 6.5kg/cm @ 6.0V, 9.0kg/cm @ 8.4V
• Motion Speed: 0.085sec/60° @ 6.0V, 0.065sec/60° @ 8.4V

Specifications DS535M HV Digital Servo:

• Rating voltage: DC 6.0V - 8.4V
• Temperature range: -20°C ~ +60°C
• Stall torque: 5.0kg/cm @ 6.0V, 6.5kg/cm @ 8.4V
• Motion Speed: 0.05sec/60° @ 6.0V, 0.035sec/60° @ 8.4V

Content:

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x RCE-BL80A Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820/DS825 high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.

Specifications :
Length: 1163mm
Height: 344mm
Width: 196mm
Main Rotor Diameter: 1248mm
Main Blade Lenght: 550mm
Tail Rotor Diameter: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 7:1:3.85
Weight (w/o power system): 2590g

Content :

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820 High Voltage Brushless Servo
• 1x DS825 High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC

Required for assembly :

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery

The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820M/DS825M high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.

Specifications :

• Length: 1163mm
• Height: 344mm
• Width: 196mm
• Main Rotor Diameter: 1248mm
• Main Blade Lenght: 550mm
• Tail Rotor Diameter: 254mm
• Motor Drive Gear: 16T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 131T
• Tail Drive Gear: 34T
• Drive Gear Ratio: 7:1:3.85
• Weight(w/o power system): 2590g

Content :

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820M High Voltage Brushless Servo
• 1x DS825M High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC
• 1x Microbeast PLUS Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery

Align T-REX 700L Dominator Kit

Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
In addition, numerous performance upgrades were carried on to this model, such as: DFC main rotor assembly, new style swashplate anti-rotation guide, hardened main gear, new style tail transmission, dual pivoted tail control system, metal frame reinforcement plates, etc.

The superior control feel, and attractive look, the T-Rex 700L Dominator is the top choice for any enthusiasts!

Features:

• The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.
• Brand new frame reinforcement plates and blocks effectively improves frame′s anti-torsion ability. The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
• 3K side frame plate is integrated with battery rail, combined with all in one cartridge and latching battery mounting design, and CNC aluminum alloy battery mounting plate, the system allows for simplified switching of battery packs and crash protection.
• Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 700L.
• Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
• Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.

Specifications:

Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight (with Motor): 3310g

Includes:

• 1x T-REX 700L DOMINATOR Kit
• 2x 700 Carbon Fiber Blade
• 2x 105mm 3K Carbon Fiber Tail Blade
• 1x 800MX Brushless Motor (520KV)
• 1x 3K Carbon Fiber Tail Boom
• 1x Aluminum Tail Boom

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, according to Transmitter)
• 1x Brushless ESC ~120A-160A
• 1x Flybarless system
• 3x Swashplate Servo
• 1x Tail Servo
• 2x 6S Li-Po 4500 ~ 5200mAh
• 1x 2S Li-Po 1900 ~ 2300mAh
• 1x Digital Pitch Gauge
• 1x Charger

Align T-REX 700L Dominator Kit

Powered by 850MX 490KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
In addition, numerous performance upgrades were carried on to this model, such as: DFC main rotor assembly, new style swashplate anti-rotation guide, hardened main gear, new style tail transmission, dual pivoted tail control system, metal frame reinforcement plates, etc.
The superior control feel, and attractive look, the T-Rex 700L Dominator is the top choice for any enthusiasts!

The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.
Brand new frame reinforcement plates and blocks effectively improves frame′s anti-torsion ability.
The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
3K side frame plate is integrated with battery rail, combined with all in one cartridge and latching battery mounting design, and CNC aluminum alloy battery mounting plate, the system allows for simplified switching of battery packs and crash protection.
Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 700L.
Powered by 850MX 490KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.

Specifications:

• Length: 1350mm text by fw
• Height: 360mm
• Width: 208mm
• Main Blade Length: 700mm
• Main Rotor Diameter: 1582mm
• Tail Rotor Diameter: 281mm
• Motor Drive Gear: 12T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 22T
• Drive Gear Ratio: 1:9.33:4.37
• Weight (with Motor): 3310g

Content:

• 1x T-REX 700L DOMINATOR Kit
• 1x MICROBEAST Plus
• 2x 700 Carbon Fiber Blade
• 2x 105mm 3K Carbon Fiber Tail Blade
• 1x 850MX Brushless Motor (490KV)
• 1x 3K Carbon Fiber Tail Boom
• 1x Aluminum Tail Boom text by fw

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, according to Transmitter)
• 1x Brushless ESC ~120A-160A
• 3x Swashplate Servo
• 1x Tail Servo
• 2x 6S Li-Po 4500 ~ 5200mAh text by fw
• 1x 2S Li-Po 1900 ~ 2300mAh
• 1x Digital Pitch Gauge
• 1x Charger

The brand new Align T-REX 760X features with new body length and new 760 main blade, as for T-REX 760X F3C utilize the new design F3C fuselage with low wind resistance, streamline appearance and convenient disassembly providing a breakthrough performance no matter in static or 3D flight.

The new 700FL rotor head system can use new F3C rotor holder arm and 3D rotor holder arm. F3C rotor holder arm effectively doubles the flight stability with excellent and precise control accuracy not only has more advantages in the static flight also provide the perfect controlling feel in 3D flight. 3D rotor holder arm suitable for extreme 3D flight provides the more direct and faster control response. Main rotor grip arm and linkage rod is at 90-degree angle symmetrically, allow to keep the best precise flight performance. Also the new 760 main blade features with better flight stability and superior lift making the T-REX 760X in the control feel and stability better than other models. Utilized the three tail blade set as standard accessory feature with excellent controlling feel and superior tail authority allowing you to enjoy the flying no matter F3C or 3D flight.

T-REX 760X introduced the advanced engineered narrow body design efficiently decreases gear abrasion, machine deformation, increases power, and extends flying durability. The unique Split-Type Main Frame design, made of composite material side plates, is engineered using our proprietary embedding technology, which strengthens the entire structure and provides better accessibility for servicing the T-REX 760X. This extraordinary design includes a progressive lightweight landing skid making the T-REX 760X the leader in this class. The lightweight structure design which significantly reduce the body weight can effectively increase your flight time.

The T-REX 760X is equipped with the new 850MX motor which is highly efficient with superior power, excellent torque, low current draw, and is the most advanced motor approved by World RC Champions. The new designed motor cooling mount plate can reduce the motor operating temperature up to 20°C (68°F). The helicopter’s high quality design is accented with precision machined red and silver metal parts. The brand new Platinum HV 160A V4 ESC supplies extreme power. The ESC includes a superior governor and BEC. The NEW DS820M/DS825M high voltage brushless servos are more efficient and outperform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

T-REX 760X F3C introduced many new design with top equipment and new F3C fuselage must provide you the best F3C flying experience.

Specification
Length: 1500mm
Height: 375mm
Width: 240mm
Main Blade Length: 760mm
Main Rotor Diameter: 1702mm
Tail Rotor Diameter: 287mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 102T
Tail Drive Gear: 23T
Drive Gear Ratio: 9.33:1:4.43
Weight(w/o Battery): Approx. 4200g

Includes
T-REX 760X Kit Set x 1 set
T-REX 760 F3C Fuselage x 1
760 Carbon Fiber Blades x 1 set(2pcs)
105mm Carbon Fiber Tail Blades x 1 set(3pcs)
850MX Brushless Motor(490KV/4535) x 1
DS820M High Voltage Brushless Servo x 3
DS825M High Voltage Brushless Servo x 1
Platinum HV 160A V4 Brushless ESC x 1
Microbeast PLUS Flybarless System x 1

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 5200 ~ 6000mAh x 2
Digital Pitch Gauge

The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights. The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction. The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

Nothing was spared in the electronics components of the kit: The mighty power of the 850MX(490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output; The new CNC machined aluminum cased BL815H brushless high voltage cyclic servos paired with BL855H rudder servo not only exhibited top of the line servo aesthetics, but also combine heat sink function and best performance in the market segment.

The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align’s superior product line. Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Content

• 1x T-REX 800E PRO DFC Kit
• 2x 780mm Carbon Fiber Main Blade
• 2x 115mm 3K Carbon Fiber Tail Blade
• 3x BL815H High Voltage Brushless Servo
• 1x BL855H High Voltage Brushless Servo
• 1x 3K Carbon Fiber Tail Boom
• 1x 850MX Brushless Motor (490KV)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

T-REX 760X 3D DOMINATOR TOP Combo Align RC Helicopter

The new models include all the current design updates from their previous releases that brings the whole T-REX family together.

• New 700EFL Rotor Head, Super low CG
• New 760 Main Blades & 105 Tri-Tail Blades
• Narrow Body Design / Split-type of Main Frame
• DS820M/DS825M High Voltage Brushless Servo
• Powerful 850MX 490KV Motor
• Brand New Platinum HV 160A V4 ESC

Specifications

• Length: 1390mm
• Height: 360mm
• Width: 195mm
• Main Blade Length: 760mm
• Main Rotor Diameter: 1702mm
• Tail Rotor Diameter: 287mm
• Motor Drive Gear: 12T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 102T
• Tail Drive Gear: 23T
• Drive Gear Ratio: 9.33:1:4.43
• Weight (w/o Battery): Approx. 3750g

Package Includes

• 1x T-REX 760X 3D Dominator Kit
• 2x 760 Carbon Fiber Blade
• 2x 105mm 3K Carbon Fiber Tail Blade
• 1x 850MX Brushless Motor (490KV)
• 3x DS820M HV Brushless Servo
• 1x DS825M HV Brushless Servo
• 1x Platinum HV 160A V4 Brushless ESC

Required for Assembly (NOT INCLUDED !)

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 2x 6S Li-Po 4500 ~ 5200mAh
• 1x Digital Pitch Gauge
• 1x Flybarless System

Click here to see our Lipo Batteries

Click here to see our Transmitters and Receivers

Fun and easy flying characteristic has been the reason for T-Rex 100S’s unparallel popularity. To increase its performance even further, Aligh has improved upon the T-Rex 100S and introduces the brand new T-Rex 100X.

The innovators at Align developed an awesome control method for the T-Rex 100. By connecting the 2.4G transmitter attachment to your trendy iPhone, your phone is instantaneously transformed into a T-Rex 100 controller.

But the most unique feature is that T-Rex 100X can also be controlled through an iPhone, allowing pilot to experience a completely different flying method.

To use the 2.4G transmitter attachment, Align’s Flight app need to be installed on your iPhone. This app is the control interface for your T-Rex 100 helicopter, which can be downloaded and installed to your iPhone (and iPod Touch, iPad) through iTunes by searching for ALIGN Flight. The control interface mimics the rc controllers with two sticks that controls the helicopter’ s movements. The stick modes can also be changed to one of the 3 settings. In addition, helicopter control can be done through iPhone’s motion sensors.

Superior flight stability and quality assurance, for immediate indoor flying gratification, T-Rex 100X is the prime choice for any pilot!

Features:

• Dedicated 2.4GHz wireless transmitter, which attaches to iPhone to transform it into a T-Rex 100X controller.
• Special iPhone app incorporating fully functional remote control capability for controlling T-Rex 100X.
• Gyro gain adjustment function.
• Brand new rotor head to main shaft attachment design, improving flight stability and minimize vibration.
• Extended tailboom to improve gyro tail locking ability and overall controllability.
• Brand new canopy design.
• Increased flybar paddle to effectively increase flight stability.
• Utilizes hobby grade micro servos and increased frame rigidity, for flight stability, crash survivability, and longevity.
• Specifically lipo battery charger, capable of charging two battery packs concurrently.
• 5-in-1 circuitry includes receiver, ESC, heading lock gyro, servos, and mixing function.

Specifications:

• Length:209mm
• Height:82mm
• Main Rotor Diameter:192mm
• Tail Rotor Diameter:36mm
• Weight(w/o power system):28.8g
• Flying Weight:Approx 33g
• A5 2.4G Wireless transmitter attachment:
• Battery Specifications : 3.7V 60mAh Li-Po
• USB Charging port input : DC 5V
• Size : 86.7 x 19.8 x12.8 mm
• Weight : 15 g

Included:

• T-REX 100X Kits set x 1
• A5 Transmitter x 1
• 3.7V / 150mAh Li-Polymer Battery x 2
• CH100 Lipo Charger x 1
• USB Cable x 1
• Philips Screwdriver x 1

T-REX 450L Dominator Kit (6S) including Motor/ESC

The internationally popular T-Rex 450 has long been a trend setting helicopter, every enthusiasts probably has owned at least one.
It is the ideal model for beginners as well as experts practicing advanced maneuvers.
Now the T-Rex 450 evolution continues, as Align drops another shocker into the market; with even more innovative designed incorporated, the brand new T-Rex 450L Dominator.

T-Rex 450L reverses the common impression people have on T-Rex 450, with material integration technology utilized on side frame design, and has features previously found only on larger models, such as battery mounting rails, top mounted motor, 700E DFC type main bearing block with integrated servo mounts, forming striking resemblances to larger contest grade models.
The newly added frame reinforcement plates not only improves helicopter′s overall rigidity and anti-torsion characteristics, the beautiful red anodizing also creates highly pleasing aesthetics, further exhibits the T-Rex 450L′s attractiveness and exclusiveness.
In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450 Pro designs, to carry on the heritage of its mature design of excellence.

Equipped with the DFC flybarless head assembly, paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, improving anti-torsion characteristics and power output during flight, resulting in even better flight stability.
Based on 6S 22,2V the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR.
When paired with RCE-BL45X brushless speed controller, the motor has superior efficiency, high power output, extreme torque, and low current, low temperature
As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.

With cutting edge design concepts and top grade electronics, T-Rex 450L Dominator surpasses traditional flight performances with higher stability, extreme power, superior control feel, yet maintains the convenience of smaller size.
The T-Rex 450L Dominator is a model not to be missed!

Features:

• Equipped with the DFC flybarless head assembly, with extremely low CG design to minimize wind resistance while providing more direct control feel. In addition, the brand new main rotor head block and new spindle design has been incorporated as standard feature. Paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, resulting in improved flight performance.
• Carbon side frame plates utilized composite material integration technology, featuring integrated battery mounting rails. The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing. In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450Pro designs, to carry on the heritage of its mature design of excellence.
• Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic.
• Based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
• Brand new RCE-BL45X electronic speed controller, capable of 2S-6S lipos, with switching BEC featuring variable voltage adjustment between 5V-6V.
• Frame reinforcement plates were added to effectively increase frame rigidity and increase anti-torsion ability. Classic red anodizing increases overall aesthetics of the helicopter.
• Brand new battery mounting plate with battery latching design, along with integrated mounting rails in side frames to simplify battery installs while protecting them.
• New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
• Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
• Added tailboom support bridge design to increase the rigidity of the overall tailboom/support assembly.
• Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
• Brand new tail blade grips with thrust bearing design, dramatically increase rudder precision and tail locking effectiveness, while increasing the longevity of bearings. The brand new extended tail rotor blades to match the 360mm main rotor blades also contributes to the tail locking performance. The new style paint scheme provides better visibility in midair.
• New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.

Specifications:

• Length: 705mm
• Height: 205mm
• Width: 110mm
• Main Blade Lenght: 360mm
• Main Rotor Diameter: 804mm
• Tail Rotor Diameter: 171mm
• Tail Rotor Lenght: 68mm
• Motor Drive Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 106T
• Tail Drive Gear: 25T
• Drive Gear Ratio: 1:11:4.24
• Weight (w/o power system): 730g

Includes:

• 1x T-REX 450L DOMINATOR Kit
• 2x 360 3G Carbon Fiber Blade
• 2x 68 Carbon Fiber Tail Blade
• 1x RCE-BL45X 45A Brushless ESC
• 1x 460MX Brushless Motor (1800KV)

Equipment required for assembly:

• 1x Transmitter (6-channel or more, helicopter system)
• 1x Receiver (6-channel or more, compatible with Transmitter)
• 1x Flybarless System
• 3x Swashplate Servo
• 1x Tail Servo
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S1P 22,2V Li-Po 1100~1400mAh battery

T-REX 450L Dominator Super Combo (6S) with MICROBEAST Plus

The internationally popular T-Rex 450 has long been a trend setting helicopter, every enthusiasts probably has owned at least one.
It is the ideal model for beginners as well as experts practicing advanced maneuvers.
Now the T-Rex 450 evolution continues, as Align drops another shocker into the market; with even more innovative designed incorporated, the brand new T-Rex 450L Dominator.

T-Rex 450L reverses the common impression people have on T-Rex 450, with material integration technology utilized on side frame design, and has features previously found only on larger models, such as battery mounting rails, top mounted motor, 700E DFC type main bearing block with integrated servo mounts, forming striking resemblances to larger contest grade models.
The newly added frame reinforcement plates not only improves helicopter′s overall rigidity and anti-torsion characteristics, the beautiful red anodizing also creates highly pleasing aesthetics, further exhibits the T-Rex 450L′s attractiveness and exclusiveness.
In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450 Pro designs, to carry on the heritage of its mature design of excellence.

Equipped with the DFC flybarless head assembly, paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, improving anti-torsion characteristics and power output during flight, resulting in even better flight stability.
Based on 6S 22,2V the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR.
When paired with RCE-BL45X brushless speed controller, the motor has superior efficiency, high power output, extreme torque, and low current, low temperature
As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.

With cutting edge design concepts and top grade electronics, T-Rex 450L Dominator surpasses traditional flight performances with higher stability, extreme power, superior control feel, yet maintains the convenience of smaller size.
The T-Rex 450L Dominator is a model not to be missed!
Features:

    Equipped with the DFC flybarless head assembly, with extremely low CG design to minimize wind resistance while providing more direct control feel. In addition, the brand new main rotor head block and new spindle design has been incorporated as standard feature. Paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, resulting in improved flight performance.
    Carbon side frame plates utilized composite material integration technology, featuring integrated battery mounting rails. The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing. In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450Pro designs, to carry on the heritage of its mature design of excellence.
    Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic. Brand new DS416M servos feature improved torque and speed, with dual bearings design to minimize deadband and provide better longevity.
    Based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    Brand new RCE-BL45X electronic speed controller, capable of 2S-6S lipos, with switching BEC featuring variable voltage adjustment between 5V-6V.
    Frame reinforcement plates were added to effectively increase frame rigidity and increase anti-torsion ability. Classic red anodizing increases overall aesthetics of the helicopter.
    Brand new battery mounting plate with battery latching design, along with integrated mounting rails in side frames to simplify battery installs while protecting them.
    New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
    Added tailboom support bridge design to increase the rigidity of the overall tailboom/support assembly.
    Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    Brand new tail blade grips with thrust bearing design, dramatically increase rudder precision and tail locking effectiveness, while increasing the longevity of bearings. The brand new extended tail rotor blades to match the 360mm main rotor blades also contributes to the tail locking performance. The new style paint scheme provides better visibility in midair.
    New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.

Specifications:

•     Length: 705mm
•     Height: 205mm
•     Width: 110mm
•     Main Blade Lenght: 360mm
•     Main Rotor Diameter: 804mm
•     Tail Rotor Diameter: 171mm
•     Tail Rotor Lenght: 68mm
•     Motor Drive Gear: 11T
•     Main Drive Gear: 121T
•     Autorotation Tail Drive Gear: 106T
•     Tail Drive Gear: 25T
•     Drive Gear Ratio: 1:11:4.24
•     Weight (w/o power system): 730g

Includes:

•     1x T-REX 450L DOMINATOR Kit
•     1x MICROBEAST Plus Flybarless System
•     2x 360 3G Carbon Fiber Blade
•     2x 68 Carbon Fiber Tail Blade
•     1x RCE-BL45X 45A Brushless ESC
•     1x 460MX Brushless Motor (1800KV)
•     3x DS450 Digital Servo
•     1x DS455 Digital Servo

Equipment required for assembly:

•     1x Transmitter (6-channel or more, helicopter system)
•     1x Receiver (6-channel or more, compatible with Transmitter)
•     1x Pitch gauge or Digital Pitch Gauge
•     1x 6S1P 22,2V Li-Po 1100~1400mAh battery-Po 1100~1400mAh battery

Successor of the T-REX 450L, equipped with high-end electronic equipment. Align's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor

Specification:

•  Length: 755mm
•  Height: 210mm
•  Width: 108mm
•  Main Blade Length: 380mm
•  Main Rotor Diameter: 850mm
•  Tail Rotor Diameter: 181mm
•  Motor Pinion Gear: 11T
•  Main Drive Gear: 121T
•  Main Drive Pulley: 56T
•  Tail Drive Gear: 15T
•  Drive Gear Ratio: 11:1:3.73
•  Weight(w/o battery): 860g

Included in the kit:

•  T-REX 470L DOMINATOR Set x 1
•  380 Carbon Fiber Blades x 1set
•  69 Tail Blade x1set
•  470MX Brushless Motor(1800KV) x 1
•  RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:

1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1

The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights.
The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction.
The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align′s superior product line.
Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Features:

• Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
• 850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It′s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
• New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
• The shapely Reinforcement plate and brace are special design for T-REX 800E, effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is particular arranged in groups of 850MX motor, subtly bring the T-REX 800E PRO stylish and metal beauty.
• Equipped with new high strength cnc M1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
• Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design.
• Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Specifications:

• Length: 1490mm
• Height: 402mm
• Width: 204mm
• Main Blade Length: 780mm
• Main Rotor Diameter: 1740mm
• Tail Blade Length: 115mm
• Tail Rotor Diameter: 301mm
• Motor Drive Gear: 12T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 104T
• Tail Drive Gear: 22T
• Drive Gear Ratio: 1:9.33:4.73
• Weight (with Motor): 4100g

Includes:

• 1x T-REX 800E PRO DFC Kit
• 1x 850MX Brushless Motor (490KV)
• 2x 780mm Carbon Fiber Main Blade
• 2x 115mm 3K Carbon Fiber Tail Blade
• 1x 3K Carbon Fiber Tail Boom

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Brushless HV ESC ~160A
• 2x 6S 22,2V Li-Po 4500~5200mAh or 1x 12S 44,4V Li-Po 4500~5200mAh
• 1x 2S 7,4V Li-Po 1900~2300mAh
• 1x Flybarless system
• 3x Swashplate Servo
• 1x Tail Servo
• 1x LiPo Charger
• 1x Dial Pitch Gauge

The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights.
The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction.
The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

Nothing was spared in the electronics components of the kit:
The mighty power of the 850MX (490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output;
The new CNC machined aluminum cased BL815H brushless high voltage cyclic servos paired with BL855H rudder servo not only exhibited top of the line servo aesthetics, but also combine heat sink function and best performance in the market segment.

The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align′s superior product line.
Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Features:

• Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
• 850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It′s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
• The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
• New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
• The shapely Reinforcement plate and brace are special design for T-REX 800E, effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is particular arranged in groups of 850MX motor, subtly bring the T-REX 800E PRO stylish and metal beauty.
• Equipped with new high strength cnc M1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
• The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by team pilots for their low operation heat, contributing to dramatically increased longevity.
• Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design.
• Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Specifications:

Length: 1490mm
Height: 402mm
Width: 204mm
Main Blade Length: 780mm
Main Rotor Diameter: 1740mm
Tail Blade Length: 115mm
Tail Rotor Diameter: 301mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.73
Weight (with Motor): 4100g

Includes:

• 1x T-REX 800E PRO DFC Kit
• 1x MICROBEAST Plus Flybarless System
• 2x 780mm Carbon Fiber Main Blade
• 2x 115mm 3K Carbon Fiber Tail Blade
• 3x BL815H High Voltage Brushless Servo
• 1x BL855H High Voltage Brushless Servo
• 1x 3K Carbon Fiber Tail Boom
• 1x 850MX Brushless Motor (490KV)
• 1x 130-160A Hv esc( Hobbywing/scorpion/as stock allows)

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 2x 6S 22,2V Li-Po 4500~5200mAh or 1x 12S 44,4V Li-Po 4500~5200mAh
• 1x 2S 7,4V Li-Po 1900~2300mAh
• 1x LiPo Charger
• 1x Dial Pitch Gauge