Blades 710mm and Up

MAH, Rotortech, Fun-key, Edge, Rail blades,Sab,Goblin, Gryphon blades,Radix blades

3D MAH BLADES 710mm

3D MAH BLADES 710mm

 15 Years of Flight research are packed in the box.

MAH 3D high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Precision.
You will feel an immediate effect when flying with MAH 3D, excellent control in the air , Stable for sport and 3d flying.

Materials: MAH 3D are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it.

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH 3D blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.
Blade sets are pre-balanced and ready to fly.

Blade Specs:

  • Length: 710mm (bolt hole to tip)
  • Width: 64mm
  • Root: 12mm
  • Bolt Hole: 4-5mm

€75.00

Inc. VAT
3D MAH Flybarless rotorblades 690mm V2

3D MAH Flybarless rotorblades 690mm V2

 15 Years of Flight research are packed in the box.

MAH 3D high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Precision.
You will feel an immediate effect when flying with MAH 3D , excellent control in the air , and if needed, aggressive response performance,.
MAH 3D are a perfect fit for Flybarless helicopters, combining long and precise R&D, Inserting the best features of Flybarless performance in one Blade.

Materials: MAH 3D are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced 3D pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it. Nothing comes close to MAH 3D

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH D3 blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.
Blade sets are pre-balanced and ready to fly.

Blade Specs:

  • Length: 690mm (bolt hole to tip)
  • Width: 63mm
  • Root: 14mm
  • Bolt Hole: 5mm
  • Weight 190gr

€79.00

Inc. VAT
Quantity
4G MAH Flybarless rotorblades 690mm

4G MAH Flybarless rotorblades 690mm

 15 Years of Flight research are packed in the box.

MAH 4G high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Precision.
You will feel an immediate effect when flying with MAH 4G , excellent control in the air , and if needed, aggressive response performance,.
MAH 4G are a perfect fit for Flybarless helicopters, combining long and precise R&D, Inserting the best features of Flybarless performance in one Blade.

Materials: MAH 4G are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced 3D pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it. Nothing comes close to MAH 4G

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH 4G blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.
Blade sets are pre-balanced and ready to fly.

Blade Specs:

  • Length: 690mm (bolt hole to tip)
  • Width: 63mm
  • Root: 12mm
  • Bolt Hole: 4-5mm

€75.00

Inc. VAT
Quantity
4G MAH Flybarless rotorblades 710mm

4G MAH Flybarless rotorblades 710mm

 

 15 Years of Flight research are packed in the box.

MAH 4G high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Precision.
You will feel an immediate effect when flying with MAH 4G , excellent control in the air , and if needed, aggressive response performance,.
MAH 4G are a perfect fit for Flybarless helicopters, combining long and precise R&D, Inserting the best features of Flybarless performance in one Blade.

Materials: MAH 4G are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced 3D pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it. Nothing comes close to MAH 4G

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH 4G blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.
Blade sets are pre-balanced and ready to fly.

Blade Specs:

 

  • Length: 710mm (bolt hole to tip)
  • Width: 64mm
  • Root: 12mm
  • Bolt Hole: 4-5mm

€75.00

Inc. VAT
4G MAH Helicopter Flybarless rotor Blades 715mm

4G MAH Helicopter Flybarless rotor Blades 715mm

Mah 4G FBL blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH FBL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

  • Length:715mm
  • Root: 12mm
  • Bolt Hole: 5mm
  • Weight: 192g
  • Width: 60m
  • Profile:Symmetrical, optimized for Flybarless helicopters

 

€80.00

Inc. VAT
Quantity
Align 780 Carbon Fiber Blades

Align 780 Carbon Fiber Blades

Align 780 Carbon Fiber Blades. These blades have been developed specifically for extreme 3D flight, featuring incredible agility and stability characteristics. The blades have a re-designed airfoil that helps to minimize turbulence at the blade tips, reducing noise and power loss. Additionally, the rigidity of the blades has been increased for improved anti-torsion characteristics during flight.

Specifications:
Shape: Symmetrical wing
Length: 780x64x8.5mm
Width: 14mm
Shaft Diameter: 5mm
Weight: 440g/set (approx)

€148.00

Inc. VAT
Quantity
EDGE 713mm Premium Flybarless Blades Version B-surface

EDGE 713mm Premium Flybarless Blades Version B-surface

EDGE 713mm Premium Flybarless Blades Version B-surface
These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money

EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines.

Flybarless Edge blades may be flown on flybarred helicopters for a smoother and less aggressive FAI style cyclic response.

Features:
Airfoil designed specifically for flybarless helicopters.
Integrated lead weight safety harness.

Specs:

  • Length: 713mm
  • Width: 60mm
  • Root: 12mm
  • Bolt Hole: 4mm

Includes:

  • One pair of EDGE blades.
  • 4 x 1mm shims.
  • A good time.

EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey.

Get an EDGE on your competition with these rotor blades. 

€89.90

Inc. VAT
Quantity
EDGE 753mm Premium Flybarless Blades Version B-surface

EDGE 753mm Premium Flybarless Blades Version B-surface

EDGE 753mm Premium Flybarless Blades Version B-surface
These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money

EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines.

Flybarless Edge blades may be flown on a traditional flybar helicopters for a smoother and less aggressive FAI/FC3 style cyclic response.

Features:
Airfoil designed specifically for flybarless helicopters.
Integrated lead weight safety harness.

Specs:

  • Length: 753mm
  • Width: 65mm
  • Root: 14mm
  • Bolt Hole: 5mm

Includes:

  • One pair of EDGE blades.
  • 4 x 1mm shims.
  • A good time.

EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey.

Get an EDGE on your competition with these rotor blades. 

€119.00

Inc. VAT
Quantity
MAH "Black Label" Flybarless Blades 695mm

MAH "Black Label" Flybarless Blades 695mm

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

  • Length:695mm
  • Root: 12mm
  • Bolt Hole: 5mm
  • Weight: 178g
  • Width: 60-63mm
  • Profile:Symmetrical, optimized for Flybarless helicopters

 

€78.00

Inc. VAT
Quantity
MAH "Black Label" Flybarless Blades 700mm

MAH "Black Label" Flybarless Blades 700mm

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

  • Length:700mm
  • Root: 12mm
  • Bolt Hole: 5mm
  • Weight: 178g
  • Width: 60-63mm
  • Profile:Symmetrical, optimized for Flybarless helicopters

 

€78.00

Inc. VAT
MAH "Black Label" Flybarless Blades 713mm

MAH "Black Label" Flybarless Blades 713mm

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

  • Length:713mm
  • Root: 12mm
  • Bolt Hole: 5mm
  • Weight: 186g
  • Width: 60m
  • Profile:Symmetrical, optimized for Flybarless helicopters

 

€78.00

Inc. VAT
Quantity
MAH 4G Flybarless rotorblades 710mm

MAH 4G Flybarless rotorblades 710mm

New Profile, New color scheme, especially for HARD 3D!!

MAH blades incorporate a revolutionary steel safety wire retention system. This assures a high level of safety in the event of a “structurally compromising impact,” better know as a crash.
Those blades are combination of design taken from many blades, and combined all in one..

Specifications:

  • Length: 710 mm
  • Chord: 63 mm
  • Root: 12 mm

Blades are matched by weight and center of gravity. Dynamically and static balanced

€75.00

Inc. VAT
Quantity
MAH 4G Flybarless rotorblades 710mm Black Label

MAH 4G Flybarless rotorblades 710mm Black Label

New Profile, New color scheme, especially for HARD 3D!!

MAH blades incorporate a revolutionary steel safety wire retention system. This assures a high level of safety in the event of a “structurally compromising impact,” better know as a crash.
Those blades are combination of design taken from many blades, and combined all in one..

Specifications:

  • Length: 710 mm
  • Chord: 63 mm
  • Root: 12 mm- Shims Supplied


Blades are matched by weight and center of gravity. Dynamically and static balanced

€75.00

Inc. VAT
Quantity
MAH INDUSTRIAL UAV Helicopter rotor Blades 1120MM Shark Skin finish Left Hand rotation

MAH INDUSTRIAL UAV Helicopter rotor Blades 1120MM Shark Skin finish Left Hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Industrial UAV/UAS  helicopters.

Semi symmetrical profile Reflex Carbon Fiber main blade for helis.

  • Length: 1120 mm
  • Rotor disc is 2500mm +-
  • Chord: 76mm
  • Thickness: 11mm
  • Weight: +-570gr
  • Bolt: 6mm
  • Root: 22mm
  • Shark Skin finish: anthracite matt
  • Profile: reflex Left hand rotation

€299.00

Inc. VAT
Quantity
MAH INDUSTRIAL UAV Helicopter rotor Blades 1120MM Shark Skin finish Right Hand rotation

MAH INDUSTRIAL UAV Helicopter rotor Blades 1120MM Shark Skin finish Right Hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Industrial UAV/UAS  helicopters.

Right hand means Clock wise rotation when looking from top

Semi symmetrical profile Reflex Carbon Fiber main blade for helis.

  • Length: 1120 mm
  • Rotor disc is 2500mm +-
  • Chord: 76mm
  • Thickness: 11mm
  • Weight: +-570gr
  • Bolt: 6mm
  • Root: 22mm
  • Shark Skin finish: anthracite matt
  • Profile: reflex Right hand rotation

€299.00

Inc. VAT
Quantity
MAH Large scale Helicopter and UAV rotor Blades 850mm

MAH Large scale Helicopter and UAV rotor Blades 850mm

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.
Length: 850mm

  • Chord: 85 mm tapering to 73mm at blade tip.
  • Weight: 250-260 grams
  • Bolt: 4/5mm
  • Root: 14mm
  • Weight : +-295grm
  • Set of 2 blades.

 

€199.00

Inc. VAT
Quantity
MAH Large scale Helicopter rotor Blades 1050MM GLOSSY finish Right Hand CW rotation

MAH Large scale Helicopter rotor Blades 1050MM GLOSSY finish Right Hand CW rotation

MAH Large scale Helicopter rotor Blades 1050MM GLOSSY finish Right Hand CW rotation. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

  • Length: 1050 mm
  • Rotor disc is 2360mm +-
  • Chord: 76mm
  • Weight: +-570gr
  • Bolt: 6mm
  • Root: 22mm
  • Finish: anthracite matt
  • Profile: reflex RIGHT hand rotation CW

€299.00

Inc. VAT
Quantity
MAH Large scale Helicopter rotor Blades 1120MM Shark Skin finish Left Hand rotation

MAH Large scale Helicopter rotor Blades 1120MM Shark Skin finish Left Hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

  • Length: 1120 mm
  • Rotor disc is 2500mm +-
  • Chord: 76mm
  • Weight: +-570gr
  • Bolt: 6mm
  • Root: 22mm
  • Shark Skin finish: anthracite matt
  • Profile: reflex Left hand rotation

€299.00

Inc. VAT
MAH Large scale Helicopter rotor Blades 1120MM Shark Skin finish Right Hand rotation

MAH Large scale Helicopter rotor Blades 1120MM Shark Skin finish Right Hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

  • Length: 1120 mm
  • Rotor disc is 2500mm +-
  • Chord: 76mm
  • Weight: +-570gr
  • Bolt: 6mm
  • Root: 22mm
  • Shark Skin finish: anthracite matt
  • Profile: reflex right hand rotation

€299.00

Inc. VAT
MAH Large scale Helicopter rotor Blades 810mm

MAH Large scale Helicopter rotor Blades 810mm

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

  • Length: 810mm
  • Chord: 81mm tapering to 68mm at blade tip.
  • Weight: 225-245 grams
  • Bolt: 4/5mm
  • Root: 14mm
  • Weight : +-270grm
  • Set of 2 blades

 

€149.00

Inc. VAT
MAH Scale Rotor blades 112cm, CCW, 22mm root

MAH Scale Rotor blades 112cm, CCW, 22mm root

Rotor Blades set, replacing expensive Alu blades, for Large scale helicopters Such as Vario , For rotors +- 2500mm

Specifications:

  • Length of blade: 112cm
  • Wide:76 mm
  • Profile Thickness : 6.5 mm
  • Root:22 mm
  • Hole :6 mm
  • Rotation: Right hand (counterclockwise)
  • White finishing

Set of 2 blades

€339.00

Inc. VAT
Quantity
MAH UAV Large scale Helicopter rotor Blades 950mm

MAH UAV Large scale Helicopter rotor Blades 950mm

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

  • Length 950mm
  • Root :14mm
  • Width: 90(root)-75(tip)
  • Weight : +-360grm

€239.00

Inc. VAT
Main Blades 750 TB

Main Blades 750 TB

Main Blades 750 TB

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber.
In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

  • Length: 750 mm
  • Width: 58/62 mm
  • Root: 12 mm
  • Bolt Hole: 5mm

€139.00

Inc. VAT
Quantity
Main Blades 800 TB

Main Blades 800 TB

Main Blades 800 TB

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber. In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

  • Length: 800 mm
  • Width: 58/62 mm
  • Root: 12 mm
  • Bolt Hole: 5mm

€149.00

Inc. VAT
Quantity
Mikado VTX 717 Carbon Rotorblades

Mikado VTX 717 Carbon Rotorblades

Mikado VTX 717 Carbon Rotorblades (2pcs)

€165.00

Inc. VAT
Quantity
RJX 710mm CF Blades-FBL Version

RJX 710mm CF Blades-FBL Version

RJX 710mm CF Blades-FBL Version

Specifications/

  • Length: 710mm (bolt hole to tip)
  • Width: 64mm
  • Root: 14mm
  • Bolt Hole: 5mm
  • Weight: ~185 grams

€97.90

Inc. VAT
Quantity
RotorTech 760mm Carbon Fiber Main Blades RT-760

RotorTech 760mm Carbon Fiber Main Blades RT-760

RotorTech 760mm Carbon Fiber Main Blades RT-760

  • Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
    Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

      Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

  •   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
  •   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
  •   Designed for your 3D performance.
  •   Matched C.C.G. for stability.
  •   Matched outward S.C.G. for better autos.
  •   Airfoil designed for fast, accurate cyclic.
  •   Layered for optimum aerodynamic damping.

Specifications:

  •   Length: 760mm
  •   Width: 66mm
  •   Grip: >= 14mm
  •   Hole: 5mm
  •   Airfoil: Symmetrical
  •   Tip: Aeroflat

€125.00

Inc. VAT
RotorTech 760mm Carbon Fiber Main Blades RT-760 B-surface

RotorTech 760mm Carbon Fiber Main Blades RT-760 B-surface

RotorTech 760mm Carbon Fiber Main Blades RT-760,

B-surface means Cosmetic flaw only, mostly on color.

  • Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
    Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

      Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

  •   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
  •   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
  •   Designed for your 3D performance.
  •   Matched C.C.G. for stability.
  •   Matched outward S.C.G. for better autos.
  •   Airfoil designed for fast, accurate cyclic.
  •   Layered for optimum aerodynamic damping.

Specifications:

  •   Length: 760mm
  •   Width: 66mm
  •   Grip: >= 14mm
  •   Hole: 5mm
  •   Airfoil: Symmetrical
  •   Tip: Aeroflat

€89.00

Inc. VAT
RotorTech 810mm Carbon Fiber Main Blades 800 size helis

RotorTech 810mm Carbon Fiber Main Blades 800 size helis

  • Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
    Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

      Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

  •   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
  •   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
  •   Designed for your 3D performance.
  •   Matched C.C.G. for stability.
  •   Matched outward S.C.G. for better autos.
  •   Airfoil designed for fast, accurate cyclic.
  •   Layered for optimum aerodynamic damping.

Specifications:

  •   Length: 810mm
  •   Width: 66mm
  •   Grip: >= 14mm
  •   Hole: 5mm
  •   Airfoil: Symmetrical
  •   Tip: Aeroflat

€179.00

Inc. VAT
SAB - Goblin Helicopter Main Blades 710 TB

SAB - Goblin Helicopter Main Blades 710 TB

SAB - Goblin Helicopter Main Blades 710 TB

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber. In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

  • Length: 710 mm
  • Width: 58/62 mm
  • Root: 12 mm
  • Bolt Hole: 5mm

€137.00

Inc. VAT
Quantity
SAB - Goblin Helicopter Main Blades 720 TB [Speed]

SAB - Goblin Helicopter Main Blades 720 TB [Speed]

SAB - Goblin Helicopter Main Blades 720 TB [Speed]

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber. In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

  • Length: 720 mm [Speed]
  • Width: 58/62 mm
  • Root: 12 mm
  • Bolt Hole: 5mm

€119.00

Inc. VAT
Quantity
VTX-717mm Premium Carbon RotorBlades

VTX-717mm Premium Carbon RotorBlades

VTX-717mm Premium Carbon RotorBlades

No compromises- That was the VTX mindset when they set out to revolutionize the r/c helicopter rotor blade. From the very first sketches, outlining their goals, every decision made was performance based. It was not the easiest nor the fastest road, but it was the only way to design and bring to market the finest rotor blade available.

Form follows function taken to the next level- Literally every millimeter of the rotor blade is aero data driven. What does this mean? There were no preconceived notions of what the perfect rotor blade should or shouldn’t look like. The VTX team let the aerodynamics have the first and last word, just as it should be.

Unique- Not just a buzz word. Every size of VTX rotor blade is unique in form. That is because each size is unique in the way it performs best. Scalability was never an option. That would have been compromising the goal of bringing the finest rotor blade to the market.

Specifications:

  • Length: Approx. 717mm
  • Weight: Approx. 209g
  • CG: Approx. 357mm from center of bolt
  • Max Chord: 75mm
  • Root: 12mm
  • Bolt Hole: 5mm
  • Safety: Internal Safety Chord

 

€165.00

Inc. VAT