BeastX

BEASTX 8cm Receiver Adapter- BX76002

BEASTX 8cm Receiver Adapter- BX76002

BEASTX Receiver Adapter Cable 8cm-BX76002

€9.90

Inc. VAT
Quantity
BEASTX Bevel Box and Mounting Frame Set

BEASTX Bevel Box and Mounting Frame Set

BEASTX Bevel Box and Mounting Frame Set

360° Inclinometer "Bevel Box"

Digital Bevel Box solves the problem just put on the magnetically adhering device and is immediately displayed the exact horizontal angle.
So you can precisely align your tools, rows are marked out accurately.

Measuring range =b1180 degrees, Accuracy =b10,1 degrees
Resolution 0,1 degrees
Waterproof housing (IP 54)
Magnetic Case
Dimensions (W x H x D): 50 x 50 x 32 mm
Operating with 1x Button Cell CR 2032 (in content)

Mounting Frame for Bevel Box (BXA76005)

To adjust the pitch values, simply pull the mounting frame on to the rotorblade.
use for T-Rex 450 up to T-Rex 700

Technical Data:
Material: Carbon, black
Thickness: 2,5mm

Mounting Frame is pre-assembled
You just have to put the Digital Bevel Box into the Carbon Frame and go on !

Content:
scews and acessories
Inclinometer Bevel Box
Bag
Li-Button cell /CR2032

€49.99

Inc. VAT
Quantity
BEASTX MICROBEAST PLUS HD Pro Edition

BEASTX MICROBEAST PLUS HD Pro Edition

MICROBEAST PLUS HD Pro Edition -Our deliveries are fresh, so you can be sure to get the latest version!

MICROBEAST PLUS HD Pro Edition is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircraft′s rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.
The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field.
Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

The device comes with Firmware ProEdition: Additional to basic functionality as flybarless and tail gyro system, an internal RPM Governor function for helicopters with electric or combustion drive is included as well as the AttidudeControl function which can level the helicopter automatically. This allows to activate different training aids like bail out rescue mode, 3D-Mode or flight trainer mode.

This version is designed as "Heavy Duty" version of MICROBEAST PLUS Pro Edition with an additional switchable high power input. It is particularly suitable for helicopters with standard sized servos and it reflects today‘s requirements for power supply like never before. The power supply port is realized by a well proven, high-quality connector. By using the included switch, the system can be activated electronically and remains operational even if the switch is disconnected by accident. Due to this fact the high power connection may be used without the switch at all. MICROBEAST PLUS HD has a housing in aluminum composite construction.

Governor mode :

The RPM Governor can be used for electric and nitro helicopters. It has built in soft start and autorotation bail out function. The control it quite similar to electric speed controllers with governor function, so you simply set your throttle curves as switches for "motor off", "headspeed 1", "headspeed 2" and "autorotation bailout".
Adjusting complex throttle curves is not necessary anymore and the helicopter will maintain the specified rotor head speed over the whole flight. Optional the nitro governor can be also used in classic style with throttle curves and a separate switch for governor/rpm control.

Attitude Control :

"Attitude Control" offers different modes of self leveling. These are "Bailout rescue mode", "3D-Mode" and "Flighttrainer mode" with angular limitation. Basically when you activate the Attitude Control it will turn your helicopter back to level position when you release the sticks.
Some modes additionaly apply collective pitch input and lock your thrust stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight regardless of how the pilot moves the stick.

Try everything and improve your skill with Microbeast Plus HD Pro Edition !

Specifications:
Input voltage : 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
Processor : 32 Bit ARM
Sensor : 6-Axis MEMS (Gyro + Accelerometer)
Dimensions : 36 x 25 x 21mm
Weight (w/o wiring) : 19g

Servo center pulses:
Swashplate: 1520µs
Rudder: 1520µs, 960µs, 760µs

Servo pulse rates:
Swashplate: 50 - 200Hz
Rudder: 50 - 560Hz

Swashplate mixing:
mCCPM, eCCPM: 90, 120, 135, 140
Swash phasing (by using StudioX)

Input signals:
Single channels
PPM serial pulse
SRXL (JR XBus, SUMD, M-Link...)
Futaba S.Bus/S.Bus2
Spektrum Remote Receiver* (DSM2/DSMX) * with Spektrum Remote Receiver adapter

In the box :

MICROBEAST PLUS HD Pro Edition
Switch harness
Power cable
Receiver connection cables
3M adhesive pads
Adjustment tool
Printed instruction manual

Accessories:
USB2SYS Interface
Spektrum Remote Receiver adapter

€249.00

Inc. VAT
Quantity
BeastX Microbeast Receiver Adapter Cable 15cm

BeastX Microbeast Receiver Adapter Cable 15cm

Set of long receiver wiring leads for the MICROBEAST flybarless system.

Length of 15cm and intended to be used to connect the MICROBEAST to your receiver.

Package includes:

  • 3 multi conductor receiver leads, each 15cm in length.

€9.90

Inc. VAT
Quantity
MICROBEAST PLUS Flybarless Stabilization controller

MICROBEAST PLUS Flybarless Stabilization controller

MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft‘s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

Box contents (MICROBEAST PLUS):

MICROBEAST PLUS
Receiver connection cables
3M adhesive pads
Adjustment tool
Printed instruction manual

MICROBEASTPLUS and MICROBEASTPLUSHD work with the world‘s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field.

Further options are available with the optional USB2SYS in­ter­face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

Specifications:

  • Input voltage  :3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
  • Processor: 32 Bit ARM
  • Sensor :6-Axis MEMS (Gyro + Accelerometer)
  • Dimensions :36 x 25 x 14 mm
  • Weight (w/o wiring) : Approx 11g

Features:

  • Servo center pulses:
  • Swashplate: 1520µs
  • Rudder: 1520µs, 960µs, 760µs

Servo pulse rates:

  • Swashplate: 50 - 200Hz
  • Rudder: 50 - 560Hz

Swashplate mixing:

  • mCCPM, eCCPM: 90, 120, 135, 140
  • Swash phasing (by using StudioX)

Input signals:

  • Single channels
  • PPM serial pulse
  • SRXL (JR XBus, SUMD, M-Link...)
  • Futaba S.Bus/S.Bus2
  • Spektrum Remote Receiver* (DSM2/DSMX)
  • * with Spektrum Remote Receiver adapter

€149.90

Inc. VAT
Quantity
MICROBEAST PLUS HD Flybarless Controller

MICROBEAST PLUS HD Flybarless Controller

MICROBEAST PLUS HD is designed as „Heavy Duty“ version of MICROBEAST PLUS with an additional switchable high power input. It is particularly suitable for helicopters with standard sized servos and it reflects today‘s requirements for power supply like never before. The power supply port is realized by a well proven, high-quality connector. By using the included switch, the system can be activated electronically and remains operational even if the switch is disconnected by accident. Due to this fact the high power connection may be used without the switch at all. MICROBEAST PLUS HD has a housing in aluminum composite construction.

MICROBEAST PLUS HD

  • Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
  • Processor: 32 Bit ARM
  • Sensor: 6-Axis MEMS (Gyro + Accelerometer)
  • Dimensions: 36 x 25 x 21mm
  • Weight (w/o wiring): ca. 19g

Features:

  • Servo center pulses:
  • Swashplate: 1520µs
  • Rudder: 1520µs, 960µs, 760µs

Servo pulse rates:

  • Swashplate: 50 - 200Hz
  • Rudder: 50 - 560Hz

Swashplate mixing:

  • mCCPM, eCCPM: 90, 120, 135, 140
  • Swash phasing (by using StudioX)

Input signals:

  • Single channels
  • PPM serial pulse
  • SRXL (JR XBus, SUMD, M-Link...)
  • Futaba S.Bus/S.Bus2
  • Spektrum Remote Receiver* (DSM2/DSMX)
  • * with Spektrum Remote Receiver adapter


Box contents:

  • MICROBEAST PLUS HD
  • Switch harness
  • Power cable
  • Receiver connection cables
  • 3M adhesive pads
  • Adjustment tool
  • Printed instruction manual

€159.90

Inc. VAT
Quantity
MICROBEAST PLUS PRO-EDITION Flybarless controller

MICROBEAST PLUS PRO-EDITION Flybarless controller

MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft′s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system.
These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

MICROBEAST PLUS and MICROBEAST PLUS HD work with the world′s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field.

Further options are available with the optional USB2SYS in-ter-face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can customize the unit specifically to their needs. StudioX for Windows & Mac is available for download at www.beastx.com.


Additional features of PRO EDITION
Governor
AttitudeControl*

*) AttitudeControl contains following functions:

  • Rescue mode (with/without extra pitch)
  • 3D-mode (with/without extra pitch)
  • Hover trainer

Specifications

  • Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
  • Processor: 32 Bit ARM
  • Sensor: 6-Axis MEMS (Gyro + Accelerometer)
  • Dimensions: 36 x 25 x 14 mm
  • Weight (w/o wiring): ca. 11g

Features

  • Servo center pulses:
  • Swashplate: 1520µs
  • Rudder: 1520µs, 960µs, 760µs

Servo pulse rates:

  • Swashplate: 50 - 200Hz
  • Rudder: 50 - 560Hz

Swashplate mixing:

  • mCCPM, eCCPM: 90, 120, 135, 140
  • Swash phasing (by using StudioX)

Input signals:

  • Single channels
  • PPM serial pulse
  • SRXL (JR XBus, SUMD, M-Link...)
  • Futaba S.Bus/S.Bus2
  • Spektrum Remote Receiver* (DSM2/DSMX)  * with Spektrum Remote Receiver adapter

Content

  • MICROBEAST PLUS PRO-EDITION
  • Receiver connection cables
  • 3M adhesive pads
  • Adjustment tool
  • Printed instruction manual


Optional Accessories:

  • USB2SYS Interface
  • Spektrum Remote Receiver adapter

€249.00

Inc. VAT
Quantity
MICROBEAST Tail Gyro Adapter Cable

MICROBEAST Tail Gyro Adapter Cable

MICROBEAST Tail Gyro Adapter Cable

€9.50

Inc. VAT
Quantity
NANOBEAST control unit for small RC model helicopters

NANOBEAST control unit for small RC model helicopters

NANOBEAST control unit for small RC model helicopters

The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot. The steering feel can be adjusted from tame to extremely agile.
Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional. Through a paid firmware upgrade, the system can be extended to "ProEdition".
This offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsafe attitude, as well as a bank switching, which allows to switch between different parameter sets in flight.
For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


Supported receiver types / transmission protocols

  • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
  • Futaba® SBUS
  • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
  • Jeti® EXBUS
  • ALIGN / FlySky iBus
  • PPM sum signal (SPPM)


Technical specifications

  • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
  • Input voltage: 4.8V to 6.0V
  • Recommended helicopter size: 180 - 250 electric helmets
  • Dimensions: 32x20x10mm
  • Weight: 5.8g


Delivery:

  • 1x NANOBEAST control unit
  • 1x patch cable for sum signal receiver
  • 2x adhesive pad
  • 1x manual
  • 1x decal sheet

€89.90

Inc. VAT
Quantity
NANOBEAST control unit Servo Connection Kit

NANOBEAST control unit Servo Connection Kit

Adaptation kit to use servos equipped with conventional connectors (JR) with Flybarless BeastX Nanobeast.

Specifications:
Connectors: JST micro / JR
Length: 50mm
5 cables

€10.70

Inc. VAT
Quantity
NANOBEAST PRO-EDITION control unit for small RC model helicopters

NANOBEAST PRO-EDITION control unit for small RC model helicopters

NANOBEAST PRO-EDITION control unit for small RC model helicopters

The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot.
The steering feel can be adjusted from tame to extremely agile.
Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional.
This ProEdition offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsteady attitude, as well as a bank switching, which makes it possible to switch between different parameter sets in flight.

For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


Supported receiver types / transmission protocols

  • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
  • Futaba® SBUS
  • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
  • Jeti® EXBUS
  • ALIGN / FlySky iBus
  • PPM sum signal (SPPM)


Technical specifications

  • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
  • Input voltage: 4.8V to 6.0V
  • Recommended helicopter size: 180 - 250 electric helmets
  • Dimensions: 32x20x10mm
  • Weight: 5.8g


Delivery:

  • 1x NANOBEAST control unit
  • 1x patch cable for sum signal receiver
  • 2x adhesive pad
  • 1x manual
  • 1x decal sheet

€169.90

Inc. VAT
Quantity
RX2SIM Wireless Multi-Simulator Adapter (USB2SYS)

RX2SIM Wireless Multi-Simulator Adapter (USB2SYS)

RX2SIM Wireless on the simulator!
No more annoying and too short cables between transmitter and RC simulator.

With the RX2SIM you are able to operate many well-known simulators with practically every remote control via radio.
This does not require a student socket on the transmitter, only a receiver suitable for the transmitter with sufficient channels must be available.

The RX2SIM is the link between the receiver and the interface belonging to the simulator.

The RX2SIM receives the receiver signals via a patch cable (included).
Single channels and all common single line receivers (PPM, Futaba S.Bus, SRXL, Spektrum DSM2/DSMX, JR DMSS) are supported.

The RX2SIM generates the corresponding student signal from the receiver signal and feeds it to the simulator interface.

In addition, the RX2SIM can also be operated as a joystick (game device).
All programs that support a joystick can be controlled via the RX2SIM.
This is especially useful because R/C simulators like the neXt CGM R/C Flight Simulator, Aerofly, FMS and also many shareware simulators are controlled with a Joysick interface.

The firmware of the RX2SIM can be updated future extensions can be easily retrofitted.


The RX2SIM supports as receiver system

  • individual channels
  • PPM-Serial
  • Spectrum Satellite (DSM2 / DSMX)
  • JR DMSS Satellite
  • Futaba S.Bus/S.Bus2
  • SRXL
  • PPM-Serial Output signal
  • Compatible with many well-known flight simulators (e.g. Phoenix R/C Pro Simulator, Real Flight R/C Flight Simulator)

USB modes

  • Passive mode (passes a connected interface)
  • Joysick emulation (neXt CGM R/C Flight Simulator, Aerofly, Heli-X, FMS, and many more)
  • USB2SYS interface emulation (connects BEASTX devices to the PC)

Technical Specifications

  • Operating voltage: 3.8V 6.0V (Typical 5V)
  • Compatible operating systems: Windows, LINUX and MAC
  • Dimensions (LxWxH): 92 x 42 x 20mm
  • Weight: 32g

Includes

  • RX2SIM USB Interface
  • USB extension
  • patch cable
  • Instructions DE/ENG

€37.90

Inc. VAT
Quantity
USB-Interface for MICROBEAST USB2SYS

USB-Interface for MICROBEAST USB2SYS

USB-Interface for MICROBEAST, Plus, Plus HD

Included:

- USB2SYS interface
- Patchcable 1,8m

€24.90

Inc. VAT
Quantity