Airplane Propellers

Composit Prop 10x5 Electro

Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

- Composite Propeller
- Suitable GP & EP

5x2.75 Electric Propeller: UMX Beast, Sbach 342
by E-flite

Composit Prop 9X3.8 Electro

Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

- Composite Propeller
- Suitable GP & EP

Composit Prop 9X4.7 Electro

Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

- Composite Propeller
- Suitable GP & EP

Aeronaut CAM-Carb-Bl.12,0x 6,0"

The new generation of folding propellers from Rudolf Freudenthaler, exploiting CAM technology.
The very thin, carefully optimised blade profile and computer-calculated airfoil sections guarantee very high accuracy and excellent efficiency combined with low power absorption from the electric motor.
All blades are made exclusively from a mixture of carbon fibres and nylon, which has proved excellent in our propellers over many years, as it endows the blades with very high torsional rigidity.
These blades are very light in weight thanks to the extremely thin blade profile and the materials employed.

Technical information:

• max RPM [1/min] 13000
• Size in cm 30,5x15,0cm
• Size in inch 12,0x6,0"
• Diameter / Pitch [cm]:     30 x 15
• Diameter / Pitch [inch]:     12 x 6
• Piece / Pack:     1 Paar
• Type:     CAM FOLDING PROP

Aeronaut CN-Spinner 36/4,00mm

Technical information:

• Front bore [mm] M2,5
• Thread M8
• thread-free length [mm] 7,5
• Length [mm] 26
• Motor shaft Ø [mm] 4
• Shaft Ø [mm] 8

Aeronaut CN-Spinner 36/4,00mm

Technical information:

• Motor shaft Ø [mm] 3
• Spinner Ø [mm]  36

Aeronaut Precision-Spinner 36/4,00mm

Technical information:

• Motor shaft Ø [mm] 3
• Spinner Ø [mm]  36

APC prop

sizes : 12 x 4 / 12 x 5 / 14 x 6

APC propeller 5X5, Fit shaft of 6mm

PROPELLER specs.

•   APC Electric propellers have been designed specifically for electric powered model airplanes.
•   APC Computer optimized design gives these propellers a thinner profile and more "bite" with less weight compare to standard glow propellers.
•   Lightweight molded nylon construction reduces rotating mass for less drag and more efficiency.

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

APC props are manufactured using a pultrusion process.
This method causes the fiberglass "fibers" to be oriented axially in 1/2" long pellets, allowing for a higher fiber (60%) to resin (nylon binder) density. Providing substantially higher strength and stiffness than glass filled nylon.
The additional stiffness is beneficial to control of vibration resonance response. The higher strength allows the use of thinner cross-sections, beneficial to weight and aerodynamic efficiency.

Competition proven. Dark gray composite material.

Diameter x Pitch in inches:10X 5, special for electric planes.

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

size 11.5x6 for Glow and Electric

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

Diameter x Pitch in inches: 12.3x3.8

Precision for ultimate power
APC propellers are manufactured using the latest CNC-machined metal moulds. The blade airfoils are carefully selected with low current drain (where applicable), excellent efficiency, and lowest possible weight as top priority, combined with ample strength. This is only
possible through the use of a special glass fibre reinforced plastic and a sophisticated computer design program.
You too can benefit from these advantages - just move up to APC propellers!

size 13x6.5 for Glow and Electric

APC props are manufactured using a pultrusion process.
This method causes the fiberglass "fibers" to be oriented axially in 1/2" long pellets, allowing for a higher fiber (60%) to resin (nylon binder) density. Providing substantially higher strength and stiffness than glass filled nylon.
The additional stiffness is beneficial to control of vibration resonance response. The higher strength allows the use of thinner cross-sections, beneficial to weight and aerodynamic efficiency.

Competition proven. Dark gray composite material.

Diameter x Pitch in inches:9x6, special for electric planes.

CAM PROP. Very high efficiency and broad effective working envelope. Range of profiles specially calculated for each propeller, ensuring best possible aerodynamics. CAM (Computer Aided Manufacturing) methods guarantee close tolerances and maximum possible accuracy. A series of propellers for models with electric or glow motors. As they are designed primarily for electric flight adaptors, all these propellers are supplied with an 8 mm centre bore. To use them with OS glow-plug motors tubular spacers are required.

size: 14,5/4'' 36-10cm

Fiala 3-Blades 20x10 Electro E3 woodpropeller - nature

Specification:

• Manufacturer:     Fiala
• Folding propeller
• Sheet:     3
• Color:     natur
• Prop material:     Holz
• max. Numbers of revolutions [rpm:     9936
• Slope [inch]:     10
• Diameter [inch]:     20
• Type:     Elektro E3
• Pusher Props
• Weight [g]:     0.000
• Drilling:     10
• Height [mm]:     0
• Width [mm]:     0
• Length [mm]:     0

Fiala 3-Blades 20x10 Electro E3 woodpropeller - nature/pusher (left turning)

Specification:

• Manufacturer:     Fiala
• Folding propeller
• Sheet:     3
• Color:     natur
• Prop material:     Holz
• max. Numbers of revolutions [rpm:     9936
• Slope [inch]:     10
• Diameter [inch]:     20
• Type:     Elektro E3
• Pusher Props
• Weight [g]:     0.000
• Drilling:     10
• Height [mm]:     0
• Width [mm]:     0
• Length [mm]:     0

FUSION PROPELLER (2PCS)

Graupner CAM FOLDING PROP blades 30x15 cm

CAM FOLDING PROP propeller blades
The propeller blades, which are supplied in packs of 2, can be used as individual blades or
combined with the spinners, which are also available to purchase separately.

Technical information:

• Sort:     Folding Props
• Wide blade root [mm]:     8
• Bore [mm]:     3,1
• Rotating direction:     R
• Colour :     black
• Diameter / bore [mm]:     3,1
• Diameter / Pitch [cm]:     30 x 15
• Diameter / Pitch [inch]: 12 x 6

Graupner CAM FOLDING PROP blades 30x15 cm

CAM FOLDING PROP propeller blades
The propeller blades, which are supplied in packs of 2, can be used as individual blades or
combined with the spinners, which are also available to purchase separately.

Technical information:

• Sort:     Folding Props
• Wide blade root [mm]:     8
• Bore [mm]:     3,1
• Rotating direction:     R
• Colour :     black
• Diameter / bore [mm]:     3,1
• Diameter / Pitch [cm]:     30 x 15

High efficiency Propeller , For slow fliers, Shock fliers, and flying boats .
Different Sizes to choose .
Pack including 2 pieces
Size: 4x3.5

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.

Prop set 10 x 4.7 ( Pusher and Tractor) , Set of 2L+2R.

These are very nice multicopter propellers that are quite stiff in comparison to similar props of ABS plastic construction. There is definite resilience to breakage combined with solid flying performance from these propellers

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.

Multicopter 4 Propeller set 11x4.7 ( Pusher and Tractor) , Set of 2L+2R.
These are very nice multicopter propellers that are quite stiff in comparison to similar props of ABS plastic construction. There is definite resilience to breakage combined with solid flying performance from these propellers

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.
 

Multicopter 4 Propeller set 8x4.3 ( Pusher and Tractor) , Set of 2L+2R.
These are very nice multicopter propellers that are quite stiff in comparison to similar props of ABS plastic construction. There is definite resilience to breakage combined with solid flying performance from these propellers

COMMENTS: For Electric flight only. Do not modify or attempt to use with Glow engines.

Propellers Alpha 139 2-3X (2 pieces)

VITAPROP CARBON FOLDING PROP 11x6"

World top quality carbon folding props from Vitaprop!

These props made from high quality materials which garantee safety and great performances.
Only best materials like german uni-directional carbon and 92 g/m² 45 degree carbon cloth, plus japanese Tenax1600 tex rowing and L285 epoxy resin were used for making.
The rowing is wrapped around metallic ring at the root and goes at least to middle of blade for extra strength.
Props 16x16" and 15x16" were designed especially for F5B and are reinforced.
Moreover, all blades are exposed to heat treatment in the oven in the end of the process. So all blades are strong for any sport or hobby purpose.
The thickness of the blade root is 8mm.
The hole for the axis attaching the blade is 3mm.

Perfect for TOPMODEL aluminum precision spinners (#020C...series).
Delivered in pair (blades only without spinner, nor hub centerpart)

XPower CARBON FOLDING PROP 12x6"

Very High-performance folding propeller blades
Very thin blades airfoil, optimized and calculated by computer, ensures high accuracy and excellent efficiency combined with low electrical power consumption by the motor.
Extremely rigid carbonfiber molded blades.

These blades are lightweight thanks to thin airfoil and material used.
The thickness of the blade root is 8mm.
The hole for the axis attaching the blade is 3mm.

Perfect for TOPMODEL aluminum precision spinners (#020C...series).
Delivered in pair (blades only without spinner, nor hub centerpart).