Goblin 700-770 Competition

Includes :

- Spherical Bearing 12 x 22 x 7 x 1pc

- Radial Bearing 30 x 37 x 4 x 2pcs

- Swashplate Upper Cup x 1pc

- Swashplate Bottom Cup x 1pc

- Swashplate Base Cup x 1pc

- Button Screw M2 x 5 x 3pcs

- Socket Screw M2 x 8 x 3pcs

- Steel Washer 2,2 x 5 x 0,3 x 3pcs

- Socket Screw M3 x 10 x 1pc

(All already assembled)

- Reference pin x 1pc

- Uniball M3x4 5 H3 x 7pcs

Use for :

- Goblin Kraken

Includes:

- Aluminum Swashplate Reference x 1pc

- Socket Head Cap Screws M3 x 10 x 2pcs

Used for:

- Goblin Kraken

Includes:

• Uniball M3 x 4.5 D5 H3 x 7 pcs
• Reference Pin x 1 pcs
• Swashplate Set assembled x 1pc

Use for:

• Goblin Kraken

Includes:

- Tail Belt 2250-6mm x 1 pc

Used for:

- Goblin Maverick

Includes:

• Spacer 5 x 9 x 0,75 x 2pcs
• 7075 Aluminum Tail Blades Grip x 2pcs
• Socket Head Cap M2x6 x 2pcs
• Button Cap M4x6 x 2pcs
• Bearing 5 x 10 x 4 (MR105ZZ) x 4pcs (already assembled)
• Thrust bearing 5 x 10 x 4 (F5 - 10M) x 2pcs

Use for:

• Goblin Kraken/Raw

Blade Size 105

Spare Part Type Blades

Blades Type Tail Blades (3Blades)

Technical features:

Length: 105 mm

Width: 27/30 mm

Root: 5 mm

Bolt Hole: 3 mm

Technical features:

Length: 105 mm
Width: 27/30 mm
Root: 5 mm
Bolt Hole: 3 mm

Technical features:

Length: 105 mm
Width: 27/30 mm
Root: 5 mm
Bolt Hole: 3 mm

Technical features:

Length: 105 mm
Width: 27/30 mm
Root: 5 mm
Bolt Hole: 3 mm

Technical features:

Length: 105 mm
Width: 27/30 mm
Root: 5 mm
Bolt Hole: 3 mm

Includes:

- Aluminum Tail Spacer x 1pc

- Socket Head Cap Screws M3 x 8 x 4pcs

Used for:

- Goblin Kraken

Includes:

- Carbon Fiber Tail Fin x 1pc

- Orange sticker x 1 set

- White Sticker x 1 set

- Yellow Sticker x 1 set

- Flat Head cap M3 x10 mm x 2pcs

- Metrix Hex Nylon Nut M3 x 2pcs

Used for:

- Goblin Kraken

Includes:

- Tail Oring Damperner x 4pcs

Use for:

- Goblin 630/700 Competition

Includes:

• Tail Pitch Slider Assembled x 1set
• Steel Grip Link Bushing x 2pcs
• Plastic Tail Linkage x 2pcs
• Socket Head Cap Screws M2x6 x 2pcs

Used for:

• Goblin Kraken

Includes:

• Steel Tail Rotor Hub x 1pc
• Steel Tail Shaft x 1pc
• Tail Orings x 1pcs

Used for:

• Goblin Kraken

Includes:

- Aluminum Tail Side Plate x 1pc

- Flanged bearing 6 x 13 x 5 (F686ZZ) x 1pc

Used for:

- Goblin Kraken

Includes:

- Slider Bushing x 2pcs

Used for:

- Goblin Kraken

Includes:

- Aluminum Main Structure Top x 1

- Socket Head Cap Screw M3 x 12 x 5pcs

- Radial Bearing 12 x 28 x 7mm ( 16001-2RS) x 1pc

- Radial Bearing 6x13x5 (MR686ZZ) x 3pcs

Used for:

- Goblin Kraken

Includes:

- Sprag Clutch 17 x 25 x 12 (FE425) x 1pc

Used for:

- Goblin Kraken

This is an SAB official nitro conversion for the Kraken model! The kit is manufactured and supported by SAB and includes everything required to convert your electric Kraken kit to a nitro, this conversion includes all the parts such as the fan shroud, fan, clutch, clutch bell, etc. (Excludes motor and electronics).

Includes:

• Finishing Washer M3 x 18goblin-kraken-words-2.jpg
• Servo Spacer x 2
• Finishing Washer M2,5 x 8
• Servo Blockx 2sab-kraken-nitro-conversion-1-woh.png
• Plastic Ball Link M2 x 2
• Uniball M2 maschio x 2
• Nitro Fan A x 1
• Nitro Fan B x 1
• Motor Support DX x 1
• Motor Support LX x 1
• Shaft YS x 1
• Shaft OS x 1sab-kraken-nitro-conversion-ass-woh.png
• Tank Rubber 50 shore x 4
• Clutch x 1
• Fan x 1
• Clutch Support x 1
• Clutch Bell Flange Black Anodizing x 1
• Z26 Nitro Pulley (black anodizing) x 1
• Nitro Pulley Flange x 1
• Motor Frame Spacer x 4
• Engine support spacer x 2
• SAB Fuel Tank x 1
• Alu Tank Support Right x 1
• Alu Tank Support Left x 1
• CF Servo Gas Support x 1
• CF Accessories Support x 1
• Fuel Clunk x 1
• Fuel Nipple x 1
• Fuel Rubber 60 shore x 1
• Better Fuel Stop x 2
• Carbon Insert M2.5 x 4
• Servo Spacer x 2
• CF Sensor Support (2mm) x 1
• H1073 cut slot x 1
• Landing Gear Space kraken Naked x 4
• Main Frame x 2
• Main Frame Spacer x 1
• Cable Pass x 1
• Servo Horn 25T 6mm x 1
• Grommet x 1
• Socket Head Cap M2,5x6 x 2
• Socket Head Cap M2,5x8 x 4
• Socket Head Cap M2,5x10 x 7
• Socket Head Cap M2,5x15 x 4
• Socket Cap M3 x 6 x 1
• Socket M3 x 8 x 9
• Socket Head Cap M3 x 10 x 11
• Socket M3 x 12 x 6
• Socket M3 x 16 x 4
• Button Cap M3x6 x 4
• Button M4 x 8 x 2
• Button M4 x 10 x 4
• Socket Head Cap M4x10 x 4
• Socket M4 x 15 x 4
• Flat M3 x 8 x 6
• Metric Hex Nuts M2 x 1
• Metric Hex Nylon Nuts M2,5 H3,5 x 4
• Metric Hex Nylon Nuts M3 H4 x 4
• Threaded Rod M2x64 x 1
• Radial bearing 12 x 18 x 4mm x 3
• Belt Gates 339-3GT-013 x 1
• Silicone Tube 2.4 x 5.5 x 600mm shore 60 x 1
• Silicone Tube 2.4 x 4.5 x 85mm shore 50 x 1
• Filter 6 x 13.5 x 15mm x 1
• Te 3.2 x 2

Nylon Screw M8x20 (4pcs) Goblin 630/700 Competition

Includes:

• Nylon Screw M8x20 x 4pcs

Use for:

• Goblin 630/700 Competition

Swashplate Black Matte for HPS3

Includes:

• Spherical Bearing 12 x 22 x 7 x 1pc
• Radial Bearing 30 x 37 x 4 x 2pcs
• Swashplate Upper Cup x 1pc
• Swashplate Bottom Cup x 1pc
• Swashplate Base Cup x 1pc
• Button Screw M2 x 5 x 3pcs
• Socket Screw M2 x 8 x 4pcs
• Steel Washer 2,2 x 5 x 0,3 x 3pcs
• Socket Screw M3 x 10 x 1pc
• Uniball M3x4 5 H18 x 1pc
• Uniball M3x4 5 H3 x 6pcs

Compatible with:

• Goblin Urukay
• Goblin 630/700/770/Competition/Speed/Thunder Using HPS3

Blade Size 105

Blades Type Tail Blades

Spare Part Type Blades

ABEC-5 Flanged bearing 8 x 12 x 3,5 (2pcs) for Goblin 380/420/500/570/630/700/770

New Plastic M8,M6 Wrench Tool for Goblin 420/500/570/630/700/770

SAB main blades 690tbs x 3

Specifically designed for all Goblin 700 and other helicopters class 700

Thanks to the variable profile, "SAB Thunderbolt Blades" can increase the performance of your helicopter optimizing efficiency and enhancing the maneuverability in all flight styles. The bi-directional carbon structure ensures high rigidity and strength necessary to withstand very high stress generated by modern 3D helicopters. Include safety wire to prevent the throwing of dangerous fragments in case of a crash.

Technical features:

• Length : 690 mm [3 BLADES]
• Width : 56/60 mm
• Root : 12 mm
• Bolt Hole : 5mm

Thrust Bearing 5x10x4 mm for Goblin 630/700 Competition (2pcs)