Helicopter Fuselages

The 800 F3C fuselage is designed specifically for T-Rex 700E F3C upgrade to 800 series in competitions. Contrary to other older fuselage designs where assembly and fitting can be difficult, this fuselage can be assembled easily and quickly with the included hardware.

The aerodynamic lines of the shark shaped minimizes wind resistance, while stabilizing the helicopter during F3C flight routines and advancing the great performance of T-Rex 700E F3C even higher, achieving total dominance in class P and F of F3C. Custom designed floating fuselage mounting system effectively reduce helicopter vibration and minimize resonance effect; The light weight fiberglass and carbon fiber construction weights only 520g, maintaining the optimal power to weight ratio of the helicopter; Colorful paint scheme ideal for visibility while in the air; Unique quick release design of the fuselage for battery access with removal of just 4 screws; Finally, a low CG landing gear system not only reduce wind resistance during flight, but also contributes to the extraordinary style. This classical fuselage is not to be missed for those who owns a T-Rex 700E.

Unique shark shape which minimizes wind resistance for F3C flight and stabilize the helicopter, allows contestants to excel in static maneuvers as well as superior tracking performance, achieving total dominance of P and F classes in F3C competitions.
Floating fuselage mounting design to effectively minimize vibration and resonance, achieving even more stable flight.
Fiberglass and carbon fiber construction to bring the weight down to mere 520g. Equipped with complete hardware for ease of assembly.
Dedicated low CG landing gear painted in white color, minimizing wind resistance during flight and stabilizing helicopter landing.
Quick fuselage removal design, battery access is achieve with removal of only 4 screws.
Colorful paint scheme with 3D elements for optimal visibility during flight.

Body length:1540mm
Body width:265mm
Body high:285mm
Weight:Approx. 750g

Aerodynamic Low Wind Resistance

Utilizing wrap-around aerodynamic design, the brand new 700 Speed Fuselage has an attention grabbing unique curve. It's tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers.

Easy to Install & Maintain

The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation, just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

Specification:

Body length:1275mm
Body width:144mm
Body high:240mm
Weight:Approx. 430g

Accessories:

1x 700E Speed Fuselage –Blue- White
1x 700E PRO Carbon Vertical Stabilizer
1x 700E Speed Fuselage Main Blade Holder
4x Canopy nut
4x Canopy protector
4x R4 pin
2x Socket Collar Screw ( M3x30mm)
2x Socket button head collar screw (M3x8mm)

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.