Chargers

Built on the original Cellpro 10s charger technology and feature set, the ALL NEW Cellpro 10XP is designed to provide a whopping 15A max current output, and 600W of power (rated at 30V DC input when charging a 10s Li battery) - all without increasing the size from the original product, and available at an extremely competitive price, you will be hard-pressed to find a safer, faster, more-complete solution to meet your charging needs in the 600W class. Supporting manual charge currents up to 15A or AUTO Charge rates (1.0C, 2.0C, and 3.0C), the CP10XP is capable of safely charging one or two lithium battery packs. Add to this new features like Multi-Chemistry support (the CP10XP can charge Li, A123 (LiFePO4), NiCd, NiMH, and Pb battery types), Auto charge or discharge to storage levels (Li only), 10 user-configurable presets, free Charge Control Software (CCS).

As a lithium battery charger, the CP10XP still maintains the key aspects of the original 10s in that it is literally a plug and play device. After connecting the batteries to the charger, charging commences with the press of a button. The charger will always remember the last-used preset. But leave it up to FMA Direct to come up with clever, intuitive ways to support multiple chemistries. Out-of-the-box, the Cellpro 10XP is ready to handle virtually any type of battery available. Chemistries are assigned to user presets. Just select a preset, connect the battery, and press the START button. Chemistries, cell count, and current can also be changed at the charger on the fly. If using the free CCS (requires FUIM2 or FUIM3 PC USB interface), full access to available preset parameters are easily adjustable including preset names, selection for multiple canned fuel tables (to improve the accuracy of AUTO charge mode for your battery types), an more!

The Cellpro 10XP charger supports the direct connection of all Cellpro Revolectrix battery packs. Certain Cellpro battery packs may require the use of the Cellpro 6 pin-to-5 pin adapter (sold separately). In addition, FMA currently sells 4s adapters separately to interface with various manufacturer's battery packs up to 4s configurations. If you own a Cellpro 4s, Cellpro GOLD, or Cellpro Multi4 charger, you may have the adapters you need already. These adapters may be used with the new CP10XP charger for packs up to 4s by connecting through the Cellpro 6 pin-to-5 pin adapters. FMA also offers Cellpro 10s adapters for other manufacturer's 2s to 6s packs for use with the Cellpro 10XP directly. Two adapters are required to charge two packs using the Cellpro 10XP charger. If you already own Cellpro 10s adapters, these work directly with the Cellpro 10XP as well. It is recommended that you download and read the available User's Guide to determine your precise requirements. A customer may also adapt to his larger battery packs (over 6s) by installing the 6 pin Cellpro balancing connectors (CPBP6P-10) or a combination of the 5 pin Cellpro balancing connector (CPBP7) and the CPBP6P-10 to his battery packs directly. All current and future Cellpro Revolectrix branded battery packs will adhere to the following conventions for the above connectors. We recommend that customers adhere to the standards we have defined when re-wiring battery packs using the Cellpro battery pigtails.

Features
●Charges Lithium Polymer, Lithium Ion, A123, NiCd, NiMH, and Pb packs. Charges any brand of pack.
●Supports high-power balance charging of Li or A123 battery packs. Balance charges one 1s to 10s pack, or two 1s to 5s LiPo packs simultaneously. When two packs are connected, the balance connections and pack main discharge wires are wired in series by the charger.
●Equipped with Cellpro brand (JST PA series times two, 6 position) balance connectors which enable the charger to monitor and independently charge each cell to its optimum level (balance charge operation).
●Accepts Cellpro 10s Adapters for plug-and-play compatibility. Cellpro 10s Adapters support from 2s to 6s battery packs (all brands). For more information on REVO adapters.
●Backward-compatibility with older Cellpro 4s adapters is assured using the available 6-pin to 5-pin adapter(s) (REVO PN CP10S-5S 4S-ADP-US) for charging 2s to 4s Cellpro packs having 5-pin balance connectors.
●Also supports customer-selectable, XH MODE. JST XH/EH balance connectors and wiring are growing to be the dominant scheme in the industry. Switching to XH mode, the CP10XP can support existing XH/EH style adapters you may already own. Splice in REVO PN CPBP6P-10-US battery pigtails to the balance wires on existing adapters and you are good to go!
●Supports non-balanced charge of Li (up to 2s), Ni (up to 28 cells), Pb (up to 24V), A123 (up to 12s).
●Accepts 10-32 VDC input.
●Up to 15A max charge current.
●Maximum 25A input current
●720W max continuous input and 605W max continuous output at 30V DC input. Charger will achieve rated output to a 10s LiPo using 30V DC input. Increasing input voltage beyond 30V does increase power output, but only if the charger's output voltage exceeds 42V e.g, when charging 12s non-balanced A123 packs. However, 32V DC input is a maximum rating. It is recommended to utilize input voltage slightly below the absolute maximum.
●Supports AUTO rate charging (1.0C, 2.0C, and 3.0C charge rate) using Advanced Fuel Gauging technology, or manual set currents of 0.10A - 15A in 0.10A increments.
●Industry's largest 1A proportional integrated balancers
●Power-balance-charge packs through balance connectors in tandem with the main discharge wires of the battery pack(s). Unit does not support balance-connector only charging.
●Compensates for balance wire lengths up to six feet with 1mV accuracy.
●Displays individual cell internal resistance to 0.1milliohm, for estimating pack quality, health, and performance.
●Storage Preset available to charge or discharge Li batteries to appropriate per-cell storage levels; 3.8v (LiPo), 3.0v (A123).
●During discharge to storage, the CP10XP incorporates 1A-per-cell (nominal) discharge rate using the charger's integrated balancing circuitry to provide up to 42W (at 10s) discharge power.
●Supports Bi-directional, optional PC interface (REVO PN FUIM2-US or FUIM3-US) which enables extensive charger setup using the CCS. Configure up to 10 custom presets, adjust speaker volume, set LCD contrast and control many other settings.
●CCS automatically checks for software and charger firmware updates in the background. Update charger firmware reliably with the click of your mouse button, and without sending the charger back to the factory. Keep up-to-date with the latest enhancements and bug fixes.
●6 different, available Fuel Gauge lookup tables (fuel tables) may be assigned to independent presets to match the characteristics of different Li battery chemistries. This feature only available using the CCS.

Charger delivered with balancer adaptor cable. boards can be delivered at extra cost

Welcome to PowerLab 6, the second offering in the amazing Cellpro PowerLab series from FMA Direct and Revolectrix. Built on the same framework as the original Cellpro PowerLab 8, this latest Battery Workstation provides a virtually identical feature-set as the original. Capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, PL6 is optimized to balance the need for high power, high current operations against the need for small size and affordability. The PowerLab 6 consumes some 23% less volume (size) than the original PowerLab 8.

Power is only one part of the equation. Read the information, and talk to people who own a PowerLab and they'll tell you why and how it out-paces any other brand on the market in terms of it's rich feature-set, ease of operation, as well as it's expandability. You will be hard pressed to find a more stream-lined user interface, or more capable, native, and free P.C. software. Add to these facts, the industry's first, well-conceived plan to support safe parallel charging of virtually any number of same-cell-count packs all at once, and you will realize that the investment in PL6 has paid for itself many times over. You no longer need more batteries. You need a battery workstation that can charge, discharge, cycle or monitor many packs faster than you can fly them to depletion!

The Cellpro PowerLab 6 Battery Workstation directly supports all Cellpro Revolectrix battery packs by using the PowerLab basic adapter (available separately). Revolectrix also sells adapters separately to interface with various manufacturer's batteries, including the ALL NEW safe parallel adapters which can be daisy-chained to allow simultaneous, safe parallel charge of multiple packs.

Features
●Selectable charge rates range 10mA to 40A
●Continuous maximum output power rating, 1000W @ +30VDC input voltage, 408W @ +12VDC input voltage
●Using +30VDC to +32VDC input, 1000W output will deliver full current rating (40A) over the full range of output voltage up to 25.2V
●Industry's first "daisy-chainable" Safe Parallel adapters available to maximize available power potential. Safely connect virtually any number (2s-6s for any brand or 2s-8s Cellpro compatible) of equal cell count/capacity together in parallel; charge, discharge, cycle, or monitor on a single PowerLab 6 unit. These items are peripheral products, available separately or as part of Combo packages, not included as a part of the basic PowerLab 6 unit. PowerLab 6 and PowerLab 8 both use the same adapters.
●Smart power management allows customer to select between programmable input power sources. Using the Charge Control Software (CCS), choose from several templates to get you in the ballpark, then fine tune the settings. Available settings include power supply input current limit, input low voltage limit, regenerative discharge rate and voltage limit. PowerLab 6 stores 1 set-up for Power Supply and 1 set-up for Battery and asks for verification one time on start-up
●PowerLab 6 does not support charging through balance wires only. For balanced charging, unit requires balance wires in combination with discharge wires (charge rate support up to 40A max)
●Initiate charge, discharge, monitor, and multiple cycles at the PL6 or via remote control from the CCS. Graph all major operations when using CCS.
●Open Architecture presets allow for customization of any User Preset including show/hide presets on unit, preset name editing, up to 100 parameters control how presets are displayed and charging/discharge/cycling parameters associated with particular batteries and/or charging strategies. Unit includes 25 user preset banks pre-loaded for most major battery type/chemistries, plus 50 library presets.
●Environmentally friendly, industry first, regenerative discharge capability of up to 1000W. Unlike traditional methods of discharge, which deplete the output battery's energy in the form of heat across a transistor, regenerative discharge takes most of that energy and puts it back into the input battery. In other words, when you discharge your LiPo for storage, you will be re-charging your Lead Acid input battery. The total amount of power that you can achieve is limited only by the amount of current that your input battery can accept, or 1000W, whichever is lower.
●PowerLab 6 is also equipped with a traditional, 50W internal discharge capability which is non-regenerative.
●Large cooling fan
●Massive over-sized internal heat sink
●12AWG silicon input power cable terminating in an EC-5 female pin connector. A plier clip assembly with EC-5 on one end and red/black plier clips on the other is available as an accessory item.
●Massive sendust core toroid capable of 40A continuous input current requirement for maximum output specifications

Specification
●For Battery types: Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)
●Pack capacity: 20 mAh to 360Ah
●Input voltage: 10-32VDC, reverse polarity protected
●Input current: 1A to 40A, software limited
●Power conversion: Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current
●Output battery charge current: Adjustable range 10mA to 40A, limited by 40A input current*

●Output battery discharge current: Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**
●Continuous max output power: 408W @ +12VDC input, 1000W @ +30VDC
●Cell balancing: Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging
●Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV
●Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA
●Measurement accuracy:
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity (“Fuel”): +/- 5% (with accurate fuel table defined for battery being charged)
●Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity
●Data integrity: Checksum, CRC checking
●Cooling fans: Single, 13 CFM, 50mm diameter
●Heat sink: Internal 120W aluminum, thin finned
●Output battery connector: “Cellpro” compatible, JST PA series, 9 position
●LCD: 2 line, 16 character, light grey/blue backlit
●Size: 5.70" x 5.57" x 3.40" 

Delivered with Balancer adaptor only, no extra wires

Charger for 5 Li-Po Bateries 1S 720 mAH (Losi/Walkera 2 pin battery connector). It provides overcharge and short circuit protection. It is lightweight, durable, practical and convenient to use. Fast charge and discharge rate for your requirements.

Specifications:

• Color : Black
• Weight : 22g
• USB powered
• Maximun 1S 720 mAH Li-Po battery

Package includes:

• 1x 5 in 1 Charger
• Batteries NOT included

5 in 1 Battery Charger for DJI Mavic Pro

This charger can charge 3 batteries at the same time.
The Double USB Port can provide 5V/2A power supply for the Mavic Pro Remote Control or for smartphones.
This item provides an intelligent control of the temperature.

Charging Time Approx. 60 Min

Specifications

• Only compatible with DJI Mavic Pro models.
• Input: AC / 110-240V, 50 / 60HZ
• Output: 13.05V / 13.5A (Plug: 13.05V /4.5A); USB: 5V / 2A
• Active Temperature Control

E-flite 1S USB Li-Po Charger, 300mA

Key Features:

• Charges most 1S batteries using E-flite ultra micro connector
• Covenient-use anywhere a powered USB port is available
• Works with a USB computer port, USB car charger adapter, or a USB AC power charger adapter
• DC Input: 5.0V 350mA
• DC Output: 4.2V 300mA

To use with Blade Nano CP-S battery

EV Peak AR1 300W DC Charger 11-32V

EV-PEAK AR1 integrates battery technology together with touch-operated system.
It is equipped with a 128x64 pixel resistive touch screen,which plays very important role in the
entire system.
Every operating procedure and status change can be shown on this screen,making the operating procedures very intuitive. When the battery is working, you can
directly check the battery capacity, battery voltage, charging time and internal resistance on the screen.
Additionally,the entire charging procedures can be recorded and generated into a charging curve for you to check on the screen.

AR1 can be powered up with 12V car battery or 11-32V output power supply, suitable for use with LiPo / LiFe / LiHV / Li-lon / NiMH / NiCd / Pb battery,
maximum 25A charge current and maximum 300W charge power.Integrated high-performance micro processor and high-efficient cooling system,control the charger always under a safety temperature
situation

Specification:

• DC input voltage  11.0V-32.0V
• Charge power  max.300W
• Discharge power max.30W
• Charge current     0.1~20.0A
• Discharge current  0.1~20.0A
• Regenerative discharge power     max. 300W
• Balance current  400mA
• LiPo/Li-Ion/LiFe/LiHV battery cell count 1-6S
• NiMH/NiCd battery cell count  1-15cells
• Pb battery voltage  2V-24V
• Weight     450g
• Dimension  102x120x46mm

Package includes:

• Charger EV-PEAK-AR1
• Charging cable Dean
• DC Supply cable XT60
• Lipo Balancer board JST XH

The A1 EV PEAK is a smart charger capable of charging any type of battery: NiCd, NiMh, LiPo, LiFe, LiIon, Pb. For Lixx batteries, the A1 has a built-in balancer.

The charging current is adjustable up to 10A for a power limit of 100W.

Thanks to its touch screen, navigation is very intuitive like on your smartphone or tablet.

The A1 works both on mains and on a 12V source.

Specifications:

• AC Input voltage: 100-240V
• DC Input Voltage: 11-18V
• Charge power: max.100W
• Discharge power: max.12W
• Charge current range: 0.1-10.0A
• Discharge current range: 0.1-5.0A
• Balance current: 400mA
• NiCd/NiMH battery cell count: 1-15cells
• LiPo/Li-ion/LiFe battery cell count: 1-6series
• Pb battery voltage: 2V-24V
• Digital Power: 3V-24V
• Operation system: graphical display

EV-PEAK A8 Touch Screen DC 1350W 1-8S Charger 11-32V

The all new Ev-Peak A8 Touch Screen DC 1350W Charger brings a new level to battery charging.
It comes with a high resolution LCD touch screen interface and can connect directy to your car battery at the field.
The A8 is able to charge, balance and discharge Lion, LiPo, LiHv, LiFe (A123), NiCd, NiMH and Lead Acid batteries. It also has a battery cycling functions to test new batteries.
The A8 offers a new Forming Charge algorithm which involves a low charge rate, typically 0.1C for a long period of time . It is used to "activate" the electrolytic media or reactivate it when batteries have been unused for a long time.

Features:

• Microprocessor controlled Delta-peak sensitivity Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable Large range of charge currents.
• Store function, allows safe storage current.
• Time limit function Input voltage monitoring.
• Also includes a mini USB port for PC software monitoring and firmware upgrades.

Specification:

• DC Input Voltage     11-32V
• Charge power     max.1350W
• Discharge power     max.100W
• Charge current range     0.1-45.0A
• Discharge current range     0.1-45.0A
• Balance current     1A
• NiCd/NiMH battery cell count     1-20cells
• LiPo/Li-ion/LiFe/LiHV battery cell count     1-8series
• Pb battery voltage     2V-24V
• Dimension     144x162x84mm
• Operation system : graphical display
• Weight     1440g

Features:

• input voltage: 12 VDC / 1000 mA (mains adapter incl.)
• mains adapter: 100-240 VAC / 50-60 Hz
• output/channel:
• AA/C/D: 1300 mA charging current
• AAA: 500 mA charging current
• 9 V: 30 mA
• USB: 5 VDC - 500 mA
• discharge current: 400 mA (AA/AAA/C/D)
• number of channels: 4
• dimensions: 127 x 172 x 65 mm
• weight: ± 420g

Specifications:

• Nickel-Metal Hydride (Ni-MH) battery charger with 5 VDC USB output
• charge and discharge functions
• 4 independent channels: charge 1~4 AAA/AA/C/D or 1~2 9V- Ni-MH batteries of different types simultaneously
• automatically selects charging current
• with LCD indicating battery charging status
• reverse-polarity protection
• microprocessor-controlled
• negative delta V cut-off function (AAA/AA/C/D)
• safety timer to prevent overcharge
• bad cell detection

Graupner/SJ POLARON EX COMBO charger that is consist of a charger and docking SMPS. Graupner/SJ is known worldwide as a leader in advanced battery charger technology, and they published a new generation of high tech charger that has the space-saving design to save space. POLARON Ex combo is 2 channels charger to provide a wide feature set, including 20 amp charge rates and 400 Watt's of power per side. Max 400W is available for 24V per channel (Max 220W /12V) .Equipped with a touch sensitive 3.0" full color LCD screen and specialized touch software, it’s a brand new experience in the field of battery charging. There are 4 options of Silver, Red, Orange, Blue 4 Colors

Features:

• The world's first standing type design
• User friendly 3.0" full color TFT LCD
• Charging 400W from 24V input, 220W from 12V input.
• Charging Capability of Lixx 1-7 cells, Nixx 1-14 cells, Pb 1-12 cells
• Individual 20 memories in each channel to manage the different parameter set
• The outstanding and maximized space saving design
• Docking SMPS features easy voltage control and checking consumption current
• Built in additional useful functionality such as servo tester, tire warmer updating with
• the latest firmware

The Set includes:

• POLARON charger
• Docking SMPS
• EH to XH 7S Adapter Board and 7S Cable
• USB Cable
• DC input cable
• Temp Sensor x 2
• Charge Cable x 2
• Alligator Clip x 2
• Charger Stand
• Manual

Specification

• Dimensions (LxWxH)  88,2x203,4x196,3mm
• Max. balancing current   350mA
• Operating voltage    DC: 11 ... 28V
• Discharge current    2x Max.60W / 0,1 - 10A
• All-up weight, approx. 1368g
• Charge output    2   
• Automat. charge current USB 5V output (5.0V 2,5A)
• Max. discharge current   10A
• Max. charge current    20A

Graupner/SJ POLARON AC/DC charger. Graupner/SJ is known worldwide as a leader in advanced battery charger technology, and they published a new generation of high tech charger that has the space-saving design to save space. POLARON AC/DC is 2 channels charger to provide a wide feature set, including DC 120W, AC 60W of power per side. Equipped with a touch sensitive 3.0" Full color TFT LCD screen and specialized touch software, it’s a brand new experience in the field of battery charging.

There are 4 options of colors- Silver, Red, Black, Blue- Availiability of colors may vary.

Features:

The world's first standing type design
User friendly 3.0" Full color TFT LCD
DC 120W/ AC 60W charge, 30W discharge per channel and user adjustable output on each channel
Charging Capability of Lixx 1-7 cells, Nixx 1-14 cells, Pb 1-12 cells
Each channel 20 memories ( total 40) to manage the different parameter set
The outstanding and maximized space saving design
Built in additional useful functionality such as servo tester, tire warmer updating withthe latest firmware

The set includes:

• POLARON AC/DC charger
• AC power cord
• EH to XH 7S Adapter Board and 7S Cable
• USB Cable
• DC input cable
• Temp Sensor x 2
• Charge Cable x 2
• Alligator Clip x 2
• Charger Stand
• Manual

Specification

• Dimensions (LxWxH)   88,2x203,4x196,3mm
• Max. balancing current   300mA
• Operating voltage    DC: 11-28V
• Input voltage     AC: 100-240V
• Discharge current    2x 30W / 0,1 ... 5A
• All-up weight, approx.   1536g
• Charge output   2   
• Automat. charge current USB 5V output (5.0V 1.0A)A
• Max. discharge current   2 x 5A
• Max. charge current    2 x 8A