Blades 560-620mm

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:600mm
• Root: 12mm
• Bolt Hole: 4mm
• Weight: 146g
• Width: 59mm
• Profile:Symmetrical, optimized for Flybarless helicopters

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:610mm
• Root: 12mm
• Bolt Hole: 4mm
• Weight: 146g
• Width: 58mm
• Profile:Symmetrical, optimized for Flybarless helicopters

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:615mm
• Root: 12mm
• Bolt Hole: 4mm
• Weight: 135g
• Width: 58mm
• Profile:Symmetrical, optimized for Flybarless helicopters

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:620mm
• Root: 12mm
• Bolt Hole: 4mm
• Weight: 146g
• Width: 58mm
• Profile:Symmetrical, optimized for Flybarless helicopters

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:650mm
• Root: 12mm
• Bolt Hole: 4mm
• Weight: 160g
• Width: 60mm
• Profile:Symmetrical, optimized for Flybarless helicopters

Fun-Key/Rotortech CFK-Rotorblade Ultimate 580mm

The FAI/Standard blades are designed to maintain the maneuverability needed, but keeping the stability of the model for FAI exercises on high level. The full symmetric profile of the blade makes the aerobatics easy and stable.

CFC main blades 60 cm /Standard /12/4 - 60 cm features:

• Weight: 140 g
• Length: 600 mm
• Blade type: Standard
• Root: 12 mm
• Bolt: 4 mm
• Profile: 2S

MS Composit GFC glass fiber Main Blades 62 cm /12/4-white #MS-50620/4 fits 600 size models

Recommended for beginners and for FAI aerobatics.

The FAI/Standard blades are designed to maintain the maneuverability needed, but keeping the stability of the model for FAI exercises on high level. The full symmetric profile of the blade makes the aerobatics easy and stable.

Technical specifications:

• Length: 600mm
• Width: 54mm
• Root: 12mm
• Hole: 4mm

Rapid FBL CFC main blades 57 cm/12/4

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.

Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.

The beginning pilot will appreciate the high resistance against small collisions.

Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.

It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapid rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.

Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.

The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.

Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.

The FBL Series Blades are optimized for Flybarless Helicopter.

Each pair of these blades is carefully and precisely balanced.

Technical specifications:

• Length: 570mm
• Width: 54mm
• Root: 12mm
• Hole: 4mm
• Weight: 120g

Rapid FBL CFC main blades 58 cm/12/4  Suitable for: Goblin 570, Karaken 580, OXY 5

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.

Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.

The beginning pilot will appreciate the high resistance against small collisions.

Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.

It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapid rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.

Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.

The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.

Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.

The FBL Series Blades are optimized for Flybarless Helicopter.

Each pair of these blades is carefully and precisely balanced.

Technical specifications:

• Length: 580mm
• Width: 54mm
• Root: 12mm
• Hole: 4mm
• Weight: 120g
• Suitable for: Goblin 570, Karaken 580, OXY 5

MS Composit Rapid FBL CFC main blades 60 cm /12/4 # MS-R50600FBL fits 600 size models

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.

Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.

The beginning pilot will appreciate the high resistance against small collisions.

Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.

It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapid rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.

Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.

The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.

Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.

The FBL Series Blades are optimized for Flybarless Helicopter.

Each pair of these blades is carefully and precisely balanced.

Technical specifications:

• Length: 600mm
• Width: 54mm
• Root: 12mm
• Hole: 4mm
• Weight: 120g
• Suitable for: all 600 size
  

MS Composit Rapid FBL CFC main blades 70cm /12/5 # MS-R90700FBL

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.

Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.

The beginning pilot will appreciate the high resistance against small collisions.

Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.

It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapid rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.

Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.

The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.

Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.

The FBL Series Blades are optimized for Flybarless Helicopter.

Each pair of these blades is carefully and precisely balanced.

Technical specifications:

• Length: 700mm
• Width: 64mm
• Root: 12/14mm
• Hole: 5mm
• Weight: 190g
• Suitable for: all 700 size
  

MS Composit Rapid FBL CFC main blades 71cm /12/5 # MS-R90710FBL

New high performance carbon blades of Rapid line are designed for a wide range of RC Heli pilots from a beginner up to a professional 3D specialist.

Thanks to the extraordinary stiffness in bending and torsion, these blades have a steady performance and stability also in very hard 3D maneuvers.

The beginning pilot will appreciate the high resistance against small collisions.

Thanks carefully selected and precisely followed airfoil the Rapid blades works with a smaller aerodynamic resistance also at big angle of pitch, which means smaller power consumption.

It is a big value, at first for 3D flying, also the common pilots can fly longer time especially with electric powered helicopters.

Rapid rotor blades are manufactured in high precision hardened steel molds using highest quality prepreg carbon composites used in aerospace industry. Processing at high temperatures and pressures gives the material excellent mechanical properties and thermal and dimensional stability.

Production and processing after removal form the mold by machine method using CNC technology. This ensures maximum accuracy and stable production characteristics of the products with high and permanent quality with no difference between the products purchased with plenty of time.

The whole line of these blades has been intensively and thoroughly tested by the best pilots and carefully tuned for the best flight characteristics.

Strongly colored ends of the blades are beneficial for good visibility and ease of positioning the helicopter during flight.

The FBL Series Blades are optimized for Flybarless Helicopter.

Each pair of these blades is carefully and precisely balanced.

Technical specifications:

• Length: 710mm
• Width: 64mm
• Root: 12/14mm
• Hole: 5mm
• Weight: 190g
• Suitable for: all 700 size such a REX 700 / Goblin 700 / Protos MAX / CORE 700 and others
  

• RotorTech 560mm Carbon Fiber Main Blades B-Surface- COSMETIC flaw only
• Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
  Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.
   
• Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
• Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
• High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
• Designed for your 3D performance.
• Matched C.C.G. for stability.
• Matched outward S.C.G. for better autos.
• Airfoil designed for fast, accurate cyclic.
• Layered for optimum aerodynamic damping.

Specifications:

• Length:560mm
• Width: 53mm
• Grip: >= 12mm
• Hole: 3-4mm
• Airfoil: Symmetrical
• Tip: Aeroflat
• Make: Carbon Fiber
• Common Application: 550-570 size Flybarless RC Helicopters.

RotorTech blades are finely crafted premium carbon fiber rotor blades from Fun-Key Aeroplane Models. RotorTech blades are designed to be an all around powerful, efficient, well rounded performance oriented blade that will suite a large majority of flight styles from simple aerobatics, F3C, and extreme 3D flight. Additionally, RotorTech blades utilize a minimal amount of paint within the mold, while still providing excellent flight visibility. By using less weight on all of their blades, weight is saved on each set which offers a small boost in performance.

After months of testing, the team at RotorTech have delivered some of the best feeling 600 sized blades available to date. Excellent stability, high collective lift, a very late stalling point and crisp agility are features of the new Ultimate blade, which have been at the forefront of design since inception. Additionally, featuring an incredible iridescently sparkling paint scheme, these blades offer a unique, new look in the sky depending on where the sun may be at any given point of the day.

All RotorTech blades are precision balanced and matched at the factory, allowing pilots to bolt on and fly any set of RotorTech blades (main or tail) to their helicopter.

Specifications

• Length: 610mm
• Width: 59mm
• Root Size: 12mm
• Hole Diameter: 4mm

RotorTech 610mm Carbon Fiber Main Blades (RT-610)

Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

• Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
• Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
• High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
• Designed for your 3D performance.
• Matched C.C.G. for stability.
• Matched outward S.C.G. for better autos.
• Airfoil designed for fast, accurate cyclic.
• Layered for optimum aerodynamic damping.

Specifications:

• Length: 610mm
• Width: 57mm
• Grip: >= 12mm
• Hole: 4mm
• Airfoil: Symmetrical
• Tip: Aeroflat

RotorTech 620mm Carbon Fiber Main Blades (RT-620)

Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

• Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
• Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
• High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span-wise loading.
• Designed for your 3D performance.
• Matched C.C.G. for stability.
• Matched outward S.C.G. for better autos.
• Airfoil designed for fast, accurate cyclic.
• Layered for optimum aerodynamic damping.

Length: 620mm

• Width: 59mm
• Weight: 135-140g
• Grip: 12mm
• Hole: 4-5mm
• Airfoil: Symmetrical
• Tip: Aeroflat
• Material: Carbon Fiber

SAB - Goblin Helicopter Main Blades 570 TBS

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber. In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

    Length: 570 mm
    Width: 47/52 mm
    Root: 10 mm
    Bolt Hole: 4mm

Technical features:

Length : 580 mm
Width : 40/52 mm
Root : 10 mm
Bolt Hole : 4mm

Technical features:
Length: 580 mm
Width: 40/52 mm
Root: 10 mm
Bolt Hole: 4mm

Technical features:
Length: 580 mm
Width: 40/52 mm
Root: 10 mm
Bolt Hole: 4mm

Technical features:
Length: 580 mm
Width: 40/52 mm
Root: 10 mm
Bolt Hole: 4mm

Technical features:
Length: 580 mm
Width: 40/52 mm
Root: 10 mm
Bolt Hole: 4mm

Description:

VTX 557 Carbon Rotorblade