Align T-rex 700

 Here you find range of aftermarket upgrades for T-rex 700 Nitro and electro
Align NEW T-Rex 700 M1 CNC Upgrade Gears Assembly 115T

Align NEW T-Rex 700 M1 CNC Upgrade Gears Assembly 115T

Use for T-REX 700 Nitro Pro.

CNC Main Drive Gear/115T x 1
M1 Autorotation tail drive gear/104T x 1
M1 Engine gear /14T x 1
M1 Front drive gear assembly x 1
Short umbrella gear/24T x 1
700N Clutch nut x 1

 

€42.00

Inc. VAT
Quantity
Align T-rex 700 Main Drive Gear 164T M0.7

Align T-rex 700 Main Drive Gear 164T M0.7

Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise, and highly efficient energy transfer properties to dramatically increase power output

€16.00

Inc. VAT
Quantity
CCPM Metal Swashplate/Silver

CCPM Metal Swashplate/Silver

Use for T-REX 700 Nitro Pro.

●CCPM metal swashplate x 1
●Linkage ball B(M3x4) x 7(Φ5x12mm)
●Bearing(6706ZZ) x 1(Φ30xΦ37x4mm)

€41.00

Inc. VAT
Quantity
M1 Engine Gear Set/14T

M1 Engine Gear Set/14T

Use for T-REX 700 Nitro Pro.

●14T Engine gear x 1(Φ7xΦ16x40.9mm) Modulus:1
●Clutch nut x 1(Φ14x6mm)

€13.00

Inc. VAT
Quantity
Magnetic Canopy Mount Black

Magnetic Canopy Mount Black

Magnetic Canopy Mount in Black

Pack - 1 x Magnet, 1 x Washer, 2 x Fitting Screws

€6.00

Inc. VAT
Quantity
Metal Flybar Control Arm/Black

Metal Flybar Control Arm/Black

Use for T-REX 700 Nitro Pro.

●Metal flybar control arm x 2
●Flybar control rod x 2(Φ5x4.5x71mm)
●Scoket screw x 4(M3x6mm)
●M4 set screw x 2(M4x4mm)

€18.80

Inc. VAT
Quantity
Metal Flybar Seesaw Holder/Silver

Metal Flybar Seesaw Holder/Silver

Use for T-REX 700 Nitro Pro.

●Metal flybar seesaw holder x 1
●Bearing MR104ZZ x 2(Φ4xΦ10x4mm)
●Bearing MF105ZZ x 2(Φ5xΦ11.2xΦ10x4mm)
●M4 collar screw x 2(Φ5xΦ6.5x10mm)
●Socket button head screw x 2(M3x12mm)
●Washer x 4(Φ3xΦ4.8x0.3mm)

€24.00

Inc. VAT
Quantity
Metal Main Rotor Holder/Silver

Metal Main Rotor Holder/Silver

Use for T-REX 700 Nitro Pro.

●Metal main rotor holder x 2
●Socket collar screw x 2(M5x32mm)
●Washer x 4(Φ10xΦ16x1mm)
●Bearing 6800ZZ x 4(Φ10xΦ19x5mm)
●Linkage ball A(M4x5) x 2(Φ5x24mm)
●M5 nut x 2

€51.50

Inc. VAT
Quantity
Metal Main Rotor Housing/Silver

Metal Main Rotor Housing/Silver

Use for T-REX 700 Nitro Pro.


●Metal main rotor housing x 1
●Damper rubber x 2(Φ9.9xΦ17x7mm)
●Spacer x 2(Φ10.2xΦ17x21mm)
●Pin x 2(Φ2.5x35mm)
●Socket collar screw x 1(M4x24mm)
●M4 nut x 1

€34.30

Inc. VAT
Quantity
Metal SF Mixing Arm/Silver

Metal SF Mixing Arm/Silver

Use for T-REX 700 Nitro Pro.

●Metal SF mixing arm x 2
●Socket button head screw x 2(M3x12mm)
●Linkage ball C(M3x3.5) x 4(Φ5x8.5mm)
●Bearing 683ZZ x 4(Φ3xΦ7x3mm)
●Collar x 2(Φ3xΦ4.8x1.5mm)
●Washer x 4(Φ3xΦ4.8x0.3mm)

€232.50

Inc. VAT
Quantity
Metal Washout Control Arm/Silver

Metal Washout Control Arm/Silver

Use for T-REX 700 Nitro Pro.

●Metal washout control arm x 2
●Radius arm x 2
●Washer x 4(Φ3xΦ4.8x0.3mm)
●Bearing 683ZZ x 4(Φ3xΦ7x3mm)
●Bearing FMR52ZZ x 4(Φ2xΦ5x2.3mm)
●Socket button head screw x 2(M3x12mm)
●Collar x 2(Φ3xΦ4.9x1.5mm)
●Socket screw x 4(M2x5mm)
●Linkage ball B(M3x4) x 2(Φ5x12mm)

€19.70

Inc. VAT
Quantity
T-REX 700N / 700E blade damper

T-REX 700N / 700E blade damper

T-REX 700N / 700E blade damper

€5.60

Inc. VAT
Quantity
TREX 600/700 Push-Pull Wheel Set

TREX 600/700 Push-Pull Wheel Set

A set of machined alloy push-pull servo wheels optimised for the Trex 600/700 CCPM system.

Set of 3 wheels with a choice of 5 different control ball positions enabling the closest mechanical servo centre to be used and so minimising sub-trim requirement. Mounting holes are M2 threaded to provide a secure fixing for control balls.

€19.00

Inc. VAT
Quantity
TREX 700 - Blade Grip Control Balls

TREX 700 - Blade Grip Control Balls

Replacement main blade grip control balls with re-sized ball suitable for use with "standard" 3/16" control ball links such as "Rocket City" or Quick UK.

These are NOT suitable for use with original Align ball links.

Supplied as a pair

€4.90

Inc. VAT
Quantity
700DFC Main Rotor Holder Arm

700DFC Main Rotor Holder Arm

Suitable for T-REX700DFC.(H70089A)
6061-T6 Aluminum alloy material and CNC processed.

Specification:

Metal Main rotor holder arm x 2
M3 CNC socket collar screw x 2(M3x24mm)
Socket collar screw x 4(M3x6mm)
Washer(Φ3xΦ4.8x0.3mm) x 2
Weight:20g

€22.00

Inc. VAT
Quantity
700DFC Main Rotor Housing

700DFC Main Rotor Housing

Use for T-REX700DFC.(H70089A)
6061-T6 Aluminum alloy material and CNC processed.

700DFC Main Rotor Housing x 1
700N Feathering shaft sleeve x 2
Damper Rubber x 2
Socket Button Head Collar Screw(M4x24) x 1
Socket button head screw(M4x8) x 2
M4 Locking nut x 1
Weight:46g

€30.00

Inc. VAT
Quantity
700DFC Main Shaft

700DFC Main Shaft

Use for T-REX 700DFC.(H70089A) Specification: 700DFC Main shaft x 2 Socket collar screw x 1(M4x24mm) Socket buton head collar screw x 1(M4x27mm) Socket screw x 2(M4x8mm) M4 nut x 2 Weight:103g

€19.90

Inc. VAT
Quantity
Align T-rex 700-800 DFC Main rotor grip arm

Align T-rex 700-800 DFC Main rotor grip arm

Suitable for T-REX 700-800 DFC

€25.00

Inc. VAT
Quantity
Align T-Rex 760 Upgrade Tail Assembly

Align T-Rex 760 Upgrade Tail Assembly

Use for:

  • T-REX 760 / 700X / 700L / 700E.

Lengthened tail boom design which can be used with 760/780 main blades has a better flight stability and is suitable for F3C flight.

Specification:

  • Carbon Tail Boom x 1 (F20.3xF21.5x855mm)
  • Torque Tube x 1 (M7.2xF8x848mm)
  • Torque tube end x 2 (M7.2xF7.95x30mm)
  • Bearing MR148ZZ x 2 (F8xF14x4mm)
  • Torque Rod Sleeve x 2 (F7.95xF10.5x5mm)
  • Carbon Tail Control Rod x 1 (F2.7xF5x828mm)
  • Linkage Rod C x 2 (F2.5xF23mm)
  • 700NFL Ball Link x 2 (F5xF20.5mm)
  • Carbon Tail Control Rod sleeve x 2 (F2.6xF6x11mm)
  • Tail Control Guide sleeve x 1 (F5xF6x35mm)

€75.00

Inc. VAT
Quantity
TREX 700 Heavy Duty Clutch Upgrade, Made in Europe

TREX 700 Heavy Duty Clutch Upgrade, Made in Europe

This clutch is a direct replacement for the original Align unit

The hinge points have been extended to provide a more progressive drive take up and to reduce the chances of stress fractures. All of our heavy duty clutches are machined from carefully selected high grade heat treated steel to ensure long life.

Supplied complete with high quality German manufactured one-way bearing.

€37.00

Inc. VAT
Quantity
Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

Specifications:

  • Base length is 14mm
  • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
  • Cut the Nylon Collars to require length.
  • Canopy Rubber Grommet openings diameter 7.2~7.5mm

Includes:

  • 2x Fast Mounting Canopy Mount
  • 2x M3x20 Set Screw
  • 2x M3x16 Set Screw
  • 2x Rubber Grommet
  • 2x 7x6MM Nylon Collar
  • 2x 7x8MM Nylon Collar
  • 2x 7x10MM Nylon Collar

€25.00

Inc. VAT
RJX 90 Size Flybar rotor head complete set

RJX 90 Size Flybar rotor head complete set

Complete head, Flybar version, for any 10 or 12 mm Shaft size. helicopters of (50- 90 size)

Fully programmable, over 80 positions, from Soft fligh to F3C-to HARD 3D..( SEE details image)

Set including all the head( swash plate not included ), with swash driver, Flybar, Paddles

This is the best quality and strongest head on the market, real made from 7075 aluminum.

€129.00

Inc. VAT
Quantity
Two-way fine adjustable Stainless steel linkage rods M2.5  60-65-71mm long (4pcs)

Two-way fine adjustable Stainless steel linkage rods M2.5 60-65-71mm long (4pcs)

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m2.5 is very strong for all today FBL helicopters.
Easy and fine adjustable for the length of linkage rods. Made From stainless steel


Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment everytime and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustbale linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack includes 4 rods

Choice of

  • M2.5x55mm
  • M2.5x60mm
  • M2.5x65mm
  • M2.5x71mm

€13.00

Inc. VAT
Quantity
Two-way fine adjustable Turnbuckle Pitch Rod Set M3 46/64mm set of 2

Two-way fine adjustable Turnbuckle Pitch Rod Set M3 46/64mm set of 2

Direct replacement for Standard Logo 700 Pitch Rod Set.

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m3

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment everytime and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustbale linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, 46 or 64mm

€7.60

Inc. VAT
Quantity
Clutch Liner Material - 180x12mm (4pcs)

Clutch Liner Material - 180x12mm (4pcs)

Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm
4 pieces of 180x12mm

Why do i need aftermarket material?

The material used in today systems as Align, and others is very thin, around 0.8-1mm.

After seen a lot of clutches broken in the air, we came with aftermarket material.
The main reason for those breaking clutches is the distance between the clutch and the material.
Example, the diameter of clutch( metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.
Every technical person knows that the material which clutch made from is spring metal which expand  with turning, but it is very limited, and can expand to 0.3-0.5mm  if more space exist, the clutch risk to break.

So if you need to change the liner, use thicker material and do the following:

Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.
If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.
If you use 1.5mm, its better, however the clutch will be tight to insert,
In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.
You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

€10.00

Inc. VAT
Quantity
Carbon Landing gear RJX, align 600-700 size, sport edition

Carbon Landing gear RJX, align 600-700 size, sport edition

Carbon Landing gear RJX, align 600-700 size, sport edition.
Fits RJX helicopters, also can fit Align and other models 600-700 size.
Comes with metal adapters.

€34.00

Inc. VAT
Quantity
M3 x 10 Button Head Frame Screws

M3 x 10 Button Head Frame Screws

 Lynx Heli Innovations -M3 x 10 Button Head Frame Screws x 45 pcs- LX0073

OEM Lynx production - With larger head which eliminates need for washer, making stronger frame assembly. (Can be used in all carbon frame helis)

€22.99

Inc. VAT