Connectors & Cables
We are the #1 provider of high performance connectors in the R/C market place.
12FG charge connector
Connector DIY for charge cable. You will need to solder the cable , supplied connector Only |
€5.00
Inc. VAT2 pin LOCKING Connector
Set of Male+Female with 15cm wire attached.
|
€4.00
Inc. VATAlligator- Crocodile Clips Connector- 1 Pair
Alligator Connector, see the picture how it looks like, Connector is 3.5cm, the Isolation cover length is 2.8 cm Price for 1 pair , one piece of black and one piece red. |
€2.00
Inc. VATAmass 3.5mm gold plated connector with Red Housing
3.5mm gold Connectors for connecting to your battery, speed control, charger, power meter or similar applications!!
Included:
|
€2.50
Inc. VATAS150 7mm Gold Plated Anti Spark Connector Set up to 150 Amps
This connector features an insulated tip to stop big sparks from higher voltage applications. This coupled with the plastic self insulating shroud offers a safe and effective connector package with no shrink tube needed. Note: When powering on, please connect the plug without yellow collar first, and then connect the plug with yellow collar. There is a Anti Spark Protector in plug with yellow collar. (Please refer to the picture below.) Features:
Specification:
Ø7mm continuance current: 150A Peak current: 200A |
€12.00
Inc. VATBanana Panel Mount Jack Socket Connectors
This jack easily mounts and contains a solder point for connection. 4mm opening to accept banana plugs. |
€2.50
Inc. VATBanana Plug set 4mm
4mm Banana Jack (Gold plated) set, fits all Chargers.. Set of Red & Black or Blue & Yellow |
€2.50
Inc. VATBeastX Microbeast Receiver Adapter Cable 15cm
Set of long receiver wiring leads for the MICROBEAST flybarless system. Length of 15cm and intended to be used to connect the MICROBEAST to your receiver. Package includes:
|
€9.90
Inc. VATCharge & Balance Cable for T-Rex 150
Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.
|
€5.00
Inc. VATCharge cable with Banana connector
Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries. Directly connect to your charger with Banana 4mm bullet connectors, and bare wires to connect any of your desired connectors. 50cm of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup. Specifications
|
€5.00
Inc. VATCharger DC cable Alligator 80amps 60cm long
Hook up your Charger to a lead-acid battery or a large power supply with these heavy duty alligator clips. Two feet (60CM) of 10 AWG wire give you plenty of flexibility to make your connection, and with clips rated for up to 80 amps, you can draw all the power you need for even the heaviest load. At the charger end of the cable, a female EC5 connector is ready to make an easy connection to your input cable. can fit other chargers with a chance of the end connector Specifications: Input Connectors: Alligator Clips
|
€11.90
Inc. VATCharging adapter XT60 Female to BANANA 4mm female
Charging adapter XT60 Female to BANANA 4mm female This extending adapter is very helpful when you need to connect a charging cable ( with Banana 4mm) to Charger which using XT60 connector as Output |
€4.00
Inc. VATCharging adapter XT60 Female to XT30 Male
Charging adapter XT60 Female to XT30 Male This extending adapter is very helpful when you need to convert a charging cable XT60 to Battery XT30 plug |
€4.00
Inc. VATCharging adapter XT60 «-» XT30 1,5mm² 30cm
Charging adapter XT60 «-» XT30 1,5mm² 30cm This extending adapter is very helpful when you need to connect a charging cable from XT60 to XT30 |
€4.00
Inc. VATConnector JST plug male-female for Bec or other applications
JST type connector kit including male and female plug. Included: 1 Male Housing with 2 Connectors. 1 Female Housing with 2 Connectors |
€2.00
Inc. VATCover cap for 5,5mm gold connector, Yellow
Cover cap for 5,5mm gold connector, Yellow |
€9.90
Inc. VATDC Male socket 2.5mm
Used to replace Charging or test socket in transmitter, airplane, heli and other applications |
€2.50
Inc. VATDeans Aluminium Housing
Housing for Deans (T-connector) Charger, hold, Hide your deans into solid light Housing. Securing with M3 screw the connector for secure charger or battery connection. Attachable to Airplane, Quad, Heli, Car and much more. Set of 1. Red Anodized color |
€7.00
Inc. VATDeans High power connector set with protection cap(male & female)
High performance Deans connector (T connect )for use with higher power Lipo batteries. |
€3.00
Inc. VATDJI Controller Data cable USB-C to USB-C for DJI Mavic series/Spark/Air
Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to USB-C android devices when flying to view and transfer the real time video / images 90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending Connector: USB-C to USB-C (Android devices and others) |
€9.90
Inc. VATDJI micro-USB OTG Upgrade Heavy Duty Coiled Video feed cable, 35-60cm to USB-C, Lightning, Micro USB
OTG cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device. Cable avaliable in following configuration: choose your model
For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your mount. You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:
Also Other models which fit the connector and OTG Cable length: 35cm (coiled), total length max 60cm Set of 1 cable |
€15.00
Inc. VATDJI USB Upgrade Heavy Duty Coiled Video feed cable, Misc models, 35-60cm
Thor cables allow you to connect your smartphone or tablet to your DJI remote, depending on the connection and the brand of your device. Cable avaliable in following configuration: choose your model
For added convenience, the Thor cable is Heavy Duty and designed in a spiral shape to automatically adjust to the distance between your device and your mount. You can use this cable with a smartphone or tablet with a micro USB connection in combination with the following remote controllers:
Other models which fit the connector Cable length: 35cm (coiled), total length max 60cm Set of 1 cable |
€15.00
Inc. VATDupont Jumper Wires 20cm (40pcs) Breadboard Cable M-M, F-F, M-F
40PCS Dupont wire 20cm cable Line color 1p-1p pin connector Length: about 20 cm /8-inch Product Options: M-F Male to Female |
€5.00
Inc. VATEC 5 gold connector EC5 high current 50 amps Mega Pack (10 pairs)
High-quality EC5 connectors should be a staple for every workbench. Those are 5MM bullet connectors, perfect for High current electric power applications and work with any battery, charger, ESC, Power Meter, etc. They are ideal for high power applications. Mega pack is 10 pairs and gives you a saving of 25% over single set.
|
€30.00
Inc. VATEC 5 gold connector set (EC5) high current 50Amps
High-quality EC5 connectors should be a staple for every workbench. Those are 5MM bullet connectors, perfect for High current electric power applications and work with any battery, charger, ESC, Power Meter, etc. They are ideal for high power applications.
|
€4.00
Inc. VATEC2 Gold Connector 2mm Bullets Male & Female (1 pair)
EC2 Gold Connector 2mm Bullets Male & Female (1 pair)
|
€2.00
Inc. VATEC3 3.5mm Battery gold Connector
EC3 Battery Connector for connecting to your battery, speed control, charger, power meter or similar applications!!
|
€3.50
Inc. VATEC3 3.5mm gold Connector mega pack (10pcs)
EC3 Connectors for connecting to your battery, speed control, charger, power meter or similar applications!! Mega pack gives you huge savings , over 20% 10 sets of EC3 connector, each set including:
|