Carry Bags

CARRYING BAG 2 PLASTIC DRAWERS

CARRYING BAG 2 PLASTIC DRAWERS

CARRYING BAG 2 CORRUGATED PLASTIC DRAWERS

Team Corally - Carrying Bag is made to resist wear and endure all those trips to and from the track and beyond.
The cover itself is made from a durable nylon thick enough to resist tearing and everyday use.
Silk-screened printed factory team logos embody the bag throughout.

The 2 corrugated plastic storage boxes keep your stuff secure and resist tearing and warping under the most extreme conditions. Each storage box includes an injection molded plastic handle insert and injection molded leading edge insert for easy sliding in and out of each box.

Dimensions :

  • 540x335x325mm

€41.90

Inc. VAT
Quantity
ETB Carry Bag for FPV and SmAll QUAD racers

ETB Carry Bag for FPV and SmAll QUAD racers

eTURBINE Carry Bag for mode 200-260 size racers, fit also other racers. very nice protection bag, must for every one

€27.00

Inc. VAT
Quantity
Fireproof LiPo carry and storage Safe Bag

Fireproof LiPo carry and storage Safe Bag

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Size 23cm x 30cm - fits for 2 packs 6s 5000, however we recommend to use each pack with each bag.

The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Instructions to use:

Ensure that charger rate is properly set and polarity is correct

  1. Attach charging leads to battery
  2. Place battery in LiPo Safe towards the bottom
  3. Place LiPo Safe on non-flammable surface
  4. Route charge leads through vent at the top seam of the LiPo Safe
  5. Close top flap of LiPo Safe and press hook and loop closure fully closed
  6. Charge battery using proper charging practices
  7. Always practice extreme caution when charging and never leave a charging battery unattended

Please check the Video showing the use of Lipo Safe

€12.00

Inc. VAT
Quantity
Gens ace Lipo Safety pocket Box

Gens ace Lipo Safety pocket Box

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Gens ace Lipo Safety Box - Dimensions: 185x60x75mm, Fit to packs up to 6s 5000.

€9.90

Inc. VAT
Quantity
Hardcase Rucksack backpack with insert foam for Yuneec Typhoon H

Hardcase Rucksack backpack with insert foam for Yuneec Typhoon H

Hardcase Rucksack with insert foam for Yuneec Typhoon H The stable protection for your Typhoon H. You keep certainly everything what on the way need and, besides, still comfortably on the back to carry. High-quality materials protect your Typhoon H against rough damages. However, all Inlays of every Typhoon H fit here there are two different versions. Version is laid out to this Hardcase for the rounded Inlay. But also the square version fits, here only little bit bigger columns exist. Specification:
  • Hardshell Backpack for Yuneec Typhoon H480
  • Good quality, durable, waterproof and shock-proof
  • Convenient and comfortable to take the case to outdoor or travelling
  • Insert foam for Typhoon H480 is included
  • Material: PC + Nylon
  • Net wight: 2.1kg
  • Backpack size: 35x54x46cm
  • Color: gray silver
*illustrated Typhoon H incl. accessories are not a component of the product.

€99.90

Inc. VAT
Quantity
Helicopter Carry Bag 450

Helicopter Carry Bag 450

Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round

-450 size Heli carrying bag made of 620D Polyester.
-Only bag on market holds450 Class helis with Blades and Canopy.
-Water resistant PVC coating on back
-9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
- Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting
- Zipper coverage for extra protection against dust/water

Color :Red-Yellow-Black

Dimensions LxWxH:900 x 25 x35 mm for up to450 size

€39.00

Inc. VAT
Quantity
Helicopter Carry Bag 500

Helicopter Carry Bag 500

Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.

-500 Heli carrying bag made of 620D Polyester.
-Only bag on market holds up to 500 Class helis with Blades and Canopy.
-Water resistant PVC coating on back
-9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
-Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting.
-Zipper coverage for extra protection against dust/water

Color :Red-Yellow-Black

Dimensions LxWxH: 1050x200x400mm for 500 size

€49.90

Inc. VAT
Quantity
Helicopter Carry Bag 550

Helicopter Carry Bag 550

Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round.

-550 Heli carrying bag made of 620D Polyester.
-Only bag on market holds up to 550 Class helis with Blades and Canopy.
-Water resistant PVC coating on back
-9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
-Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting.
-Zipper coverage for extra protection against dust/water

Color :Blue-Yellow-Black

Dimensions LxWxH: 1150x200x400mm for 550 size

€49.90

Inc. VAT
Quantity
Helicopter Carry Bag 600

Helicopter Carry Bag 600

Smart design Helicopter carry bag, the only heli bag with those features available on market, yet low cost. Helicopter carry bag was produced base on actual market demand and our own R&D. Simple and Smart design, lightweight for travel, protection and storage solution over all year round

-50 ( up to 600) size Heli carrying bag made of 620D Polyester.
-Only bag on market holds 600 Class helis with Blades and Canopy.
-Water resistant PVC coating on back
-9.5mm closed cell foam inner layer + thick PVC board on bottom for maximum protection.
-Extra wide front opening , convenience to drop in heli without removing blades and canopy.
-“Tail Boom” Zipper for even easier access to the Heli/Bag
-Inner Soft pocket for accommodation of TX or Tools/Accessories, with flexible location mounting
-Zipper coverage for extra protection against dust/water

Color :Red-Yellow-Black

Dimensions LxWxH: 1400x250x500mm for up to 600 size

€55.00

Inc. VAT
Quantity
LiPo Battery Fireproof Safety Guard  Bag  215 X 50 X 170MM

LiPo Battery Fireproof Safety Guard Bag 215 X 50 X 170MM

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

Dimensions:  215 X 50 X 170MM

€9.90

Inc. VAT
Quantity
Lipo heating case with Lipo mounting plate and thermometer

Lipo heating case with Lipo mounting plate and thermometer

The heating is controlled via a digital thermometer which is visible and operable from the outside.
If the temperature falls below the set temperature by 1 degree, the controller switches on again.
The inside of the case is completely covered with insulating material. The floor slab was double insulated.
It can be operated from the inside via a 3S Lipo, and from the outside via 2 existing 4mm sockets. (e.g. power supply, car battery)
The cables that can be seen in the case are the temperature sensor and the internal power connection for 3S (no connector is installed on delivery, if you want to order HERE)
The holding plates are screwed to the case and can be easily loosened at any time to thread new lipo straps.
The color of the mounting plate may vary slightly.

Specifications:

  • Operating voltage 11V - 14V
  • Economical 2A power at 12V
  • Inner dimensions (insulation already taken into account) 28cm X 20cm X 7cm
  • 2x 12V - 12Watt
  • 1x fan
  • Working area up to 70 degrees
  • Economical 2A electricity

Contains:

  • 1 x Alu case
  • 1 x Lipo mounting plate

€186.00

Inc. VAT
Quantity
Mikado Pocket bag brown for VBar Control

Mikado Pocket bag brown for VBar Control

Mikado Pocket bag brown for VBar Control

Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

€99.00

Inc. VAT
Quantity
Mikado Pocket bag camouflage blue-grey for VBar Control

Mikado Pocket bag camouflage blue-grey for VBar Control

Mikado Pocket bag camouflage blue-grey for VBar Control

Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

€99.00

Inc. VAT
Quantity
Mikado Pocket bag camouflage blue-grey for VBar Control

Mikado Pocket bag camouflage blue-grey for VBar Control

Mikado Pocket bag camouflage blue-grey for VBar Control

Carrying bag for VBar Contro, with inside and outside pockets and shoulder strap.

€99.00

Inc. VAT
Quantity
Radio Case Faux Leather V-Control with Mikado Logo 200

Radio Case Faux Leather V-Control with Mikado Logo 200

Radio Case Faux Leather V-Control with Mikado Logo 200

this Case can fit the Mikado logo 200 And the Vbar control radio

€119.00

Inc. VAT
Quantity
SAB Goblin 280 FIREBALL - MINI COMET Carry Bag

SAB Goblin 280 FIREBALL - MINI COMET Carry Bag

Instruction:

  • Use for Sab Goblin 280 ( FIREBALL - MINI COMET)

Descriptions:

  • This red and black carry bag is specifically designed to hold and protect Goblin 280 helicopters, utilizing superior grade water resistant canvas.
  • The protection foams inside hold the helicopter securely in an upright position.
  • Extra thick padding ensures an excellent protection for your Sab Goblin helicopters.

Important notice:

  • Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

€54.00

Inc. VAT
Quantity
SAB Goblin 380 Carry Bag - Red

SAB Goblin 380 Carry Bag - Red

SAB Goblin 380 Carry Bag - Red

Allows for safe transport and protects from minor bumps and scratches.

Instruction:

  • Use for Sab Goblin 380
Descriptions:

This carry bag is specifically designed to hold and protect Goblin 380 helicopters, utilizing superior grade water resistant canvas.
The protection foams inside hold the helicopter securely in an upright position.
Extra thick padding ensures an excellent protection for your Sab Goblin helicopters.

Dimensions:

  • Length: 80 cm
  • Width: 20 cm
  • Height: 25 cm

Important notice:
Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

€64.90

Inc. VAT
Quantity
Sab Goblin 500-570-580 KRAKEN Carry Bag Black/Red Colour

Sab Goblin 500-570-580 KRAKEN Carry Bag Black/Red Colour

Sab Goblin 500-570-580 KRAKEN Carry Bag Black/Red Colour

The protection foams inside hold the helicopter in an upright position ensuring the best safety.

Extra thick padding provides an excellent protection for your Sab Goblin helicopters.

Dimension (cm)

Outer dimensions: 

Length 115
High 37
Width 20

Inner pocket:

Length 35
High 18
Width 9

Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

€89.90

Inc. VAT
Quantity
Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

Sab Goblin 630/700/770/Urukay/Speed/KRAKEN Carry Bag Black/Red Colour

This carry bag by SAB is specifically designed to hold and protect Goblin 630/700/770/Urukuay Competition/Speed/KRAKEN helicopters, utilizing superior grade water resistant canvas.

The protection foams inside hold the helicopter in an upright position ensuring the best safety.

Extra thick padding provides an excellent protection for your Sab Goblin helicopters.


Dimension (In cm) LENGTH*HIGH*WIDTH

Bag  140*42*24
Inner pocket 35*18*9

Important notice:

Please turn off your helicopter and radio before storing in bag to ensure safety during transport.

€100.00

Inc. VAT
Quantity
Scorpion RC Travel Pit Bag carry case

Scorpion RC Travel Pit Bag carry case

  • Compact size 540mm x 300mm x 525mm for 1/10th vehicle, but also for other machines, great to keep tools and parts in.
  • Extra tough fabric, handle and straps, heavy-duty stitching throughout
  • 3 x Composite inner drawers 470mm x 215mm x 140mm (inner size) with handles
  • Full-length composite inner liner
  • Removable tool organizer can stow drivers snug inside elastic loops and easily go from the bag to your workbench or pit space at the track
  • External pockets for extra storage
  • Net weight : 4.1kgs (shipping volume weight: 10kgs)

€112.00

Inc. VAT
Quantity
Shockproof Bag Carry Case for Rc transmitter

Shockproof Bag Carry Case for Rc transmitter

Perfectly fits DJI ,Futaba Remote Control,JR , Radiolink, Spektrum, and many others

Great for Chargers

Specification:

  •  Dimensions: 31*20*11cm
  •  Weight: 0.7kg

Package contents:

1 X Transmitter Bag Case (Transmitter not included)

€35.00

Inc. VAT