Carbon Technology

Carbon Technology
Carbon Technology make best products from German Carbon

Products


  • 60-90 Carbon Paddles

    60-90 Carbon Paddles

    3D paddles for 60-90 helicopters, using 4mm flybars.
    Those paddles using 2 grub screws for securing the paddle on the flybar

    Weight : 36-38gr
    Flybar Hole 4mm

    SKU: RCM15519
    €33.00
    inc. VAT

     72HR STOCK
  • Carbon Boom ms Stinger

    Carbon Boom ms Stinger

    Carbon Boom for MS stinger

    SKU: RCM16360
    €19.00
    inc. VAT

     LOW STOCK
  • Carbon Flat strip 10X0.5 mm, length of 1 meter

    Carbon Flat strip 10X0.5 mm, length of 1 meter

    Carbon flat strip 10X0.5mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 0.5 mm, Width 10.0 mm

    SKU: STRIP10X0.5
    €4.00
    inc. VAT

     IN STOCK
  • Carbon Flat strip 10X2 mm, length of 1 meter

    Carbon Flat strip 10X2 mm, length of 1 meter

    Carbon flat strip 10X2mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 2 mm, Width 10.0 mm

    SKU: STRIP10X2
    €6.90
    inc. VAT

     IN STOCK
  • Carbon Flat strip 3x0.5mm, length of 1 meter

    Carbon Flat strip 3x0.5mm, length of 1 meter

    Carbon flat strip 3x0.5mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 0.5 mm, Width 3.0 mm

    SKU: STRIP3X0.5
    €2.60
    inc. VAT

     IN STOCK
  • Carbon Flat strip 3x1mm, length of 1 meter

    Carbon Flat strip 3x1mm, length of 1 meter

    Carbon flat strip 3x1mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 1 mm, Width 3.0 mm

    SKU: STRIP3X1
    €2.40
    inc. VAT

     IN STOCK
  • Carbon Flat strip 4X1mm, length of 1 meter

    Carbon Flat strip 4X1mm, length of 1 meter

    Carbon flat strip 4X1mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 1 mm, Width 4.0 mm

    SKU: STRIP4X1
    €2.50
    inc. VAT

     IN STOCK
  • Carbon Flat strip 5X1mm, length of 1 meter

    Carbon Flat strip 5X1mm, length of 1 meter

    Carbon flat strip 5X1mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 1 mm, Width 5 mm

    SKU: STRIP5X1
    €2.60
    inc. VAT

     IN STOCK
  • Carbon Flat strip 6X1 mm, length of 1 meter

    Carbon Flat strip 6X1 mm, length of 1 meter

    Carbon flat strip 6X1mm rectangular high modulus carbon fiber strip available in 1 meter long
    These pultruded carbon fiber composite strips have a high fibre content of high modulus carbon in an epoxy matrix, making them extremely rigid and strong.
     

    Specification
    Thickness 1 mm, Width 6 mm

    SKU: STRIP6X1
    €2.70
    inc. VAT

     IN STOCK
  • Carbon Landing gear 30-50 size

    Carbon Landing gear 30-50 size

    This is a super light Carbon Landing Gear for EP and also up to 50 class Nitro machines.You will get the whole kit including hardware for skids mounting.This is a cheaper version of the unbreakable gear, but holding very well models up to 50 size.
    click on the thumbnail to see more details

    Width: 240mm
    Skid Diameter: 8mm
    Skid Length : 300mm
    Height: 55mm
    Weight: approx. 59gr

    SKU: SKU14349
    €39.00
    inc. VAT

  • Carbon Landing gear 50/600 size

    Carbon Landing gear 50/600 size

    High quality carbon fiber landing gears set for Raptor 30-50, or any other heli with skid pipes`s diameter 8mm .

    Height - 56mm, width between skids - 225mm . Light - 54 gr

    Set included : CF landing gear Struts (2) with CF mounting Hardware. (Skids used as original from the kit)

    SKU: RCC3050
    €26.00
    inc. VAT

  • Carbon Sheet 1.5mm

    Carbon Sheet 1.5mm

    Carbon (CF) plate / sheet, 1.5 mm thick, size 400 x 500 mm

    SKU: RJ013
    €79.00
    inc. VAT

  • Carbon Sheet 2.5mm

    Carbon Sheet 2.5mm

    Carbon (CF) sheet / plate 2.5 mm thick
    Size is 400 x 500 mm

    SKU: RJ0132
    €89.50
    inc. VAT

     LOW STOCK
  • Carbon Sheet 2mm

    Carbon Sheet 2mm

    Carbon (CF) sheet / plate 2.0 mm thick
    Size is 400 x 500 mm

    SKU: RJ0131
    €84.00
    inc. VAT

     IN STOCK
  • Cf Landing gear Trex 450

    Cf Landing gear Trex 450

    High quality carbon fiber landing gears set for T-Rex 450 and other 450 size helis.
    Height - 40mm, width between skids - 140mm . Light -20 gr., but STRONG .
    Set included : CF landing gear Struts with CF mounting Hardware. (Skids used as original from the kit)
    SKU: RCC450
    €15.00
    inc. VAT

  • Fiber Canopy H50

    Fiber Canopy H50

    Originally made for Hurrican, this canopy will fiot most 50 size helis
    Lightweight , finished in Yellow color, supplied with carbon fiber black window screen.

    SKU: RCM16236
    €27.00
    inc. VAT

     LOW STOCK
  • G10 FRP fiber sheet 2.0 mm

    G10 FRP fiber sheet 2.0 mm

    G10 FRP fiber sheet , size 400 x 500 mm. Black color.
    Thickness 2.0 mm

    SKU: RJ071
    €36.00
    inc. VAT

  • G10 FRP fiber sheet 2.5 mm

    G10 FRP fiber sheet 2.5 mm

    G10 FRP fiber sheet , size 400 x 500 mm. Black color.
    Thickness 2.5 mm

    SKU: RJ072
    €39.90
    inc. VAT

  • H6-12 HEXACOPTER

    H6-12 HEXACOPTER

    This is a hexacopter  main frame, landing gear . Total expected weight to fly inclusive IOSD/VIDEO 4kg

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!

    • 100% Material and product is made In Europe, with highest Grade Carbon fiber for Maximum strength and performance.
    • The 650 frame can be equipped in single or Coaxial config.
    • Max pick up weight is up to 2.9 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)
    • Fold-able Arms, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    • main frame`s weight ~420gr,
    • size between motor axes ~650mm
    • equipped with single-battery slider system (it`s possible to fit till to 4s 6000mAh lipo)


    Sliding battery tray, for easy battery replacement.

    Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.
    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42170
    €379.00
    inc. VAT

     LOW STOCK
  • H6-12 HEXACOPTER EXTENDED

    H6-12 HEXACOPTER EXTENDED

    This is an Extended hexacopter combo set - main frame, landing gear and camera mount. Size is +- 900mm. Frame complete weight ~960gr.

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!

    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performace.

    =The 900 frame can be equipped in each arm with 1 or 2 motors, e.g 6 motors and if added also pusher motors, it can be 12.

    =Max pick up weight is up to 5.5 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~620 gr,
    - size between motor axes ~900mm
    - equipped with Dual-battery slider system ( Recommended 2 x 3s 5000 lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos TGY930. Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery trays, for easy battery replacement.

    -Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.

    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42170EX
    €529.00
    inc. VAT

     LOW STOCK
  • Raptor 30/50 Tail Fin Set Silver

    Raptor 30/50 Tail Fin Set Silver

    Carbon Fiber vertical and horizontal tail fins for Raptor  30 or 50 size helicopters.
    Specifications: Material: Carbon +Glass Fiber
    Color: Silver
    SKU: RCM16234
    €19.60
    inc. VAT

  • Y6-COPTER

    Y6-COPTER

    This is a Y-COPTER combo set - main frame, landing gear and camera mount. Total weight ~620gr.

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performace.

    =The 650 frame can be equipped in each arm with 1 or 2 motors, e.g 3 motors and if added also pusher motors, it can be 6.

    =Max pick up weight is up to 2.9 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~420gr,
    - size between motor axes ~650mm
    - equipped with single-battery slider system (it`s possible to fit till to 4s 6000mAh lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos TGY930. Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.
    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42172
    €399.00
    inc. VAT

     LOW STOCK
  • Y6-COPTER COMBO

    Y6-COPTER COMBO

    This is a Y6 Combo set with all you need to complete( NO RADIO/.LIPO) included, please note that the frame is Pre-built, and components are NOT installed.

    We deliver a quality controller which is perfect to fly and train, and can be expanded with GPS and other add ons.

    Frame is made from Carbon. This machine is produced in Europe. Same frame can be found under other brands for higher cost.

    Included:

    -1 x MWC or KK flight controller
    -6 x BL Motors Avizar suitable for this frame configuration.
    -6 x APC or equal props suitable for this configuration
    -6 x 20-30 Amps Speed controllers( For expert-possible to have programmable)
    -1 x Led strip for easy orientation
    -6 x Prop Adaptor


    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performance.

    =The 650 frame can be equipped in each arm with 1 or 2 motors per Arm.

    =Max pick up weight is up to 2.9 kg ( net Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~420gr,
    - size between motor axes ~650mm
    - equipped with single-battery slider system (it`s possible to fit till to 4s 6000mAh lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos . Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 300 mm, width between skids = 400mm. Weight ~110gr.

    SKU: SKU42172PD
    €659.00 €890.00
    inc. VAT

     LOW STOCK
  • Y6-COPTER EXTENDED

    Y6-COPTER EXTENDED

    This is an EXTENDED Y-COPTER - main frame, landing gear and camera mount. Size +-900mm, FrameTotal weight ~820 gr.

    This product can be supplied as Frame only, with landing gear, and with camera mount. all per customer choice.

    Main Highlights!


    =Produced In Europe, with highest Grade Carbon fiber for Maximum strength and performace.

    =The 900 frame can be equipped in each arm with 1 or 2 motors, e.g 3 motors and if added also pusher motors, it can be 6.

    =Max pick up weight is up to 5 kg ( nett Pickup weight, excluding the own weight of the frame/electronics)

    =Foldable Arms, Landing gear, camera mount, for easy transportation and carriage. can fit all in Supermarket Bag

    Technical Data

    - main frame`s weight ~620gr,
    - size between motor axes ~900mm
    - equipped with Dual-battery slider system (we recommend 2 x 3s 5000 lipo), two battery mount plates are included.

    -- camera mount is is producing in two options :1- compatible with pocket-size cameras - like Canon Ixus ,SONY and others pocket size. and second - for GoPro.

    Any of mounts are equipped with two servos TGY930. Every Axe supported by Dual ball bearings
    Working angles : ailerons +-30 degrees, elevator -90 /+10degrees.
    Camera mount`s weight ~230gr.

    - Sliding battery tray, for easy battery replacement.

    -Landing gear, Height is 205mm, width between skids = 400mm. Weight ~110gr.

    All other electronic parts/ Motors and camera are not included in the set

    SKU: SKU42172EX
    €249.00
    inc. VAT

     LOW STOCK

Manufacturers