DJI

DJI

 DJI producing Quadcopters, flight controllers.

Products


  • DJI 1345s Quick-Release Propellers for Inspire 1 (Pair)

    DJI 1345s Quick-Release Propellers for Inspire 1 (Pair)

    DJI 1345s Quick-Release Propellerss for Inspire 1 is a two pack that features one clockwise (CW) and one counterclockwise (CCW) prop. The props include the Quick Release Rotor Adapter. This part screws onto the motor and remains attached to the aircraft. The props can then be snapped on or off as needed without being unscrewed. Please refer to the user guide to ensure that you replace the CW prop with a new CW prop and a CCW prop with a CCW prop. Improper installation will lead to the props becoming unscrewed in-flight. These are specifically for the DJI Inspire 1 quadcopter and should not be installed on other aircraft.

    •     Each Pack Contains Two Propellers
    •     One CW Self-Tightening Propeller
    •     One CCW Self-Tightening Propeller
    •     Compatible with DJI Inspire 1 Quadcopter
    •     Requires Quick Release Rotor Adapter

    Note: These rotors require the Quick Release Rotor Adapters (available separately), which must be installed before installing the props. Additionally, the self-tightening props cannot be used with the Quick Release Rotor Adapters in place.

     

    SKU: DJI52
    €10.00
    inc. VAT

  • DJI CABLE PACKAGE for ZENMUSE H3-3D

    DJI CABLE PACKAGE for ZENMUSE H3-3D

    DJI CABLE PACKAGE for ZENMUSE H3-3D 
    SKU: DJI-CABLE-ZH3-3D
    €19.50
    inc. VAT

     LOW STOCK
  • DJI Camera locker for Zenmuse H3-3D

    DJI Camera locker for Zenmuse H3-3D

     DJI Camera locker for Zenmuse H3-3D

    SKU: DJI-H3-3D-PART39
    €14.00
    inc. VAT

     LOW STOCK
  • DJI Flame Wheel 450 / 550 Landing gear

    DJI Flame Wheel 450 / 550 Landing gear

    DJI Flame Wheel 450 / 550 Landing gear
    This landing gear heightened for flame wheel 450 and flame wheel 550, it allows to put a typical gimble Zenmuse H3-2D for example.

    Specification:

    1. Wheelbase: 210mm
    2. Height: 130mm
    3. Weight: 15 grs
    SKU: DJI-F550-LandSkid
    €16.90
    inc. VAT

     72HR STOCK
  • DJI Flame Wheel F450 ARF

    DJI Flame Wheel F450 ARF

    DJI Flame Wheel F450 ARF Includes Motors, ESC, Props   DJI-FW450

    The DJI FlameWheel 450 is a multi-rotor copter designed for all types of pilots either for fun or aerial photography. It can hover, cruise, even roll amongst other flight elements. It can be used for entertainment, aerial photography, FPV and other aeromodelling activities.

    Combo Content

    • 1 x F450 Frame
    • 4 x DJI OPTO 30A ESC
    • 4 x DJI 1045 Propeller
    • 4 x DJI 2212 Motor

    Specifications:

    •   Frame Weight - 282g
    •   Diagonal Wheelbase - 450mm
    •   Takeoff Weight - 800g ~ 1200g
    •   Recommended Battery - LiPo (3S 1500mAh ~2600mAh)
    •   Motor - 2212 ~ 2216 (stator size)
    •   ESC - 30A
    SKU: DJI-FW450
    €169.00
    inc. VAT

     LOW STOCK
  • DJI Focus Wireless Follow Focus System

    DJI Focus Wireless Follow Focus System

    DJI Focus Wireless Follow Focus System

    DJI's Focus is a wireless follow focus that integrates natively with the Zenmuse Z5 series of camera/gimbals systems and can be mounted on rigs equipped with 15mm or 19mm rods - including the Ronin and Ronin-M gimbals. The Focus features a handheld remote controller (transmitter) with a focus knob to give to the feel of a traditional mechanical follow focus. The wireless system sports a range of up to 330' line-of-sight with a delay of only 14ms.

    Control accuracy of ±0.002°
    Self-contained drive unit combines brushless motor and receiver in a single module - simplifying installation and requiring only a single power source
    Use with Inspire 1 Quadcopter carrying Zenmuse X5 or X5R camera
    Adjustable endpoints - ideal for lenses, such as photo lenses, that lack "hard" stops
    Programmable focus points and other parameters adjustable through controller menu
    OLED display on controller for menu access and status display
    Compatible with DJI's Ronin and Ronin-M gimbals
    Works with third-party gimbals or rigs that have 15mm or 19mm rod support
    Dual communication ports for future upgrades
    Built-in rosette for greater mounting flexibility

    Product Highlights:

    • Control Angle Accuracy:±0.002°
    • Brushless Motor and Receiver in One Unit
    • Up to 330' Line-of-Sight Range
    • Adjustable Endpoints
    • Works with Ronin and Ronin-M
    • Works with Zenmuse X5 or X5R Cameras
    • Fits Standard 15mm and 19mm Rods
    • Built-In Rosette Mount
    SKU: DJI-FOCUS
    €2199.00
    inc. VAT

     IN STOCK
  • DJI Goggles new Intelligent Flight Mode

    DJI Goggles new Intelligent Flight Mode

    The DJI Goggles are comfortable goggles designed for seamless FPV flying with DJI products. They combine a pair of large ultra-high quality screens, long-range, low lag wireless connectivity, and direct control of photo and video capture.
    With Intelligent Flight Modes like ActiveTrack, TapFly, Terrain Follow, Cinematic Mode and Tripod mode, a totally new flying dimension is created.

    DJI Goggles are a perfect pair with DJI's new Intelligent Flight Mode:
    Fixed-Wing Mode. In this mode, the aircraft doesn’t turn left or right but instead flies forward with enough rotational movement for realistic flight simulation.
    Combined with Head Tracking Mode, you can use your head to control the Mavic Pro for a fully realized flight experience.An AR trajectory prediction feature in Fixed-Wing Mode makes using this mode in complex environments safer. Other Intelligent Flight Modes include Terrain Follow, ActiveTrack, TapFly, Cinematic Mode and Tripod Mode.

    Immersive FPV, a pair of 1920×1080 HD screens and a head tracking feature, enabling you to look at the world from above.

    KEY POINTS:

    • Return FULL HD 1080p
    • Screens 5 " / FOV of 85 °
    • Connections HDMI 110 milliseconds of latency
    • Compatible Mavic, Inspires, Phantom 4...

    In the Box:

    • DJI Goggles Body ×1
    • Headband ×1
    • Micro USB Cable ×1
    • HDMI Cable ×1
    • Wire Clip ×1
    • Cleaning Cloth ×1
    • Charger ×1
    SKU: DJI-GOGGLES
    €599.00
    inc. VAT

     72HR STOCK
  • DJI Goggles Racing Edition - 1080p Video Goggles

    DJI Goggles Racing Edition - 1080p Video Goggles

    DJI Goggles Racing Edition - 1080p Video Goggles

    DJI Goggles just got better looking and more powerful, so you can experience FPV racing in style and without traditional restraints.

    Fly with smooth, clear video and experience the thrill of drone racing like never before.

    Experience FPV races in style and without traditional restrictions.


    The DJI Goggles Racing Edition (RE) features a newly designed visor and a new headband in a matte black. The upholstery stands out with high quality red leathers.
    Designed specifically for drone racing, the DJI Goggles RE are compatible with the OcuSync video transmission module, as well as a powerful camera module.
    The modules work together to provide video transmission with up to 7 km range and minimum latency of only 50 ms1 in addition to the analog signal.
    Enjoy stable video transmissions and experience the speed of a drone race like never before.

    OcuSync video transmission module:
    The DJI Goggles RE offers innovative new hardware - for ultimate speed, stability and clarity. The OcuSync video transmission module provides 2.4 GHz and 5.8 GHz video transmissions with a latency of only 50 ms and a maximum range of up to 7 km.1 Equipped with various powerful new features, such as the 1280 × 960 HD image transmission3 and automatic Frequency hopping spread spectrum (FHSS) transmission, make this module a universal solution for various aircraft. Thanks to the advanced technology and the interaction of the external modules for different setups, the DJI Goggles RE offer an unprecedented immersive experience.

    12 selectable transmission channels
    Accessing different low-interference transmission channels is one of the keys to success in FPV races, especially when multiple drones are in use. Choose from up to 12 transmission channels - for effective prevention of interference.

    Automated FHSS technology
    In the event of interference, the OcuSync module will quickly and automatically switch between the 2.4 and 5.8 GHz channels for the best possible transmission.

    Connect two pairs of DJI Goggles RE or an additional remote control
    With an extra pair of DJI goggles, another person can enjoy the speed of the race. This is also possible with another Mavic Pro remote control.

    Camera module
    The DJI OcuSync camera compatible with the DJI Goggles RE uses a 1/3? Image sensor, for image transfer with much higher resolution than usual analog FPV goggles on the market. The sensor uses "Global Shutter", which reduces rolling shutter effects due to high-frequency vibrations. The 148 ° field of view of the lens provides a natural image with minimal distortion. The advanced camera allows users to perform precise flight maneuvers while recording the entire flight for later analysis.

    Global shutter
    Prevents rolling shutter effects

    148° field of view
    Lens with minimal distortion

    Video recording
    With additional playback formats

    Ultimate control

    Access to flight settings, gimbal control and accurate flight data is essential for effective drone races. The DJI Goggles RE offers all this and much more.

    Flight control
    The DJI Goggles RE uses a bottom-up processing system that does not require a module for signal reception. By connecting a remote control to the goggles, pilots can control their drones directly with an F3, F4, KISS, Naze or other supported flight controllers.

    Gimbal Control
    Head-mounted gimbal mode allows users to control the gimbal camera by moving their goggles head-on.

    Display
    Essential flight information, including image transmission, battery level and signal quality, are clearly and directly readable.

    Digital and analog transmission
    In addition to digital HD transmission, the DJI Goggles RE provide analog transmission via an SMA interface.

    Always the right antenna

    The included omnidirectional antennas transmit signals in multiple directions simultaneously for maximum stability.

    Pagode:

    These circular polarized antennas offer best performance at 5.8 GHz.

    Cylindrical:

    Also circularly polarized, the antennas offer fully integrated performance at 2.4 and 5.8 GHz.

    Dipole:

    These linearly polarized antennas operate at 2.4 and 5.8 GHz and are extremely lightweight - for clear video transmissions at close range.

    Large scope:

    In addition to compatibility with racing drones and fixed-wing aircraft, the DJI Goggles RE can also be used with other devices such as robots, industrial drones and other remotely controlled vehicles.

    Grandiose entertainment
    Enjoy games, movies and more.

    Wide compatibility. Best comfort.
    Compatible with the Mavic Pro, Spark, Phantom 4 Series and Inspire 2, the DJI Goggles RE retains all the benefits of DJI goggles, including all flight settings, two HD displays, head control and more. An optimized face pillow and headband now provide even more comfort and more protection from sunlight.

    More options when playing videos

    The DJI Goggles RE play videos in even more formats! The device supports MP4, MOV and MKV to give users an even more immersive experience playing media content. In addition, the new goggles are able to reproduce 360 ​​° panoramas in 6K.

    Technical specifications:
    DJI GOGGLES RE

    • Weight (without accessories) DJI Goggles RE: 502 g; Headband: 500 g
    • Dimensions DJI Goggles RE 195 × 155 × 110 mm
    • Headband (folded) 255 × 205 × 92 mm
    • Screen size 5? × 2
    • Image Resolution 3840 × 1080 (Single Screen: 1920 × 1080)
    • Transmitter power (EIRP) 2.4 GHz: 25.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 18.5 dBm (SRRC)
    • Live view modes 1080p30, 720p60, 720p30
    • Video format MP4 (H.264)
    • Supported playback formats MP4, MOV, MKV (Video format: H264;
    • Audio format AAC-LC, AAC-HE, AC-3, DTS, MP3)
    • Battery capacity 9440 mAh
    • Operating temperature 0 to 40 ° C
    • Charger (input) 100-240 VAC, 50/60 Hz, 0.5 A
    • Output 5V 3A / 9V 2A / 12V 1.5A

    DJI OCUSYNC CAMERA

    • Radio frequency 2.4 GHz / 5.8 GHz
    • Transmitter power (EIRP) 2.4 GHz: 22.5 dBm (FCC); 18.5 dBm (CE); 19 dBm (SRRC) 5.8 GHz: 25.5 dBm (FCC); 12.5 dBm (CE); 25.5 dBm (SRRC)
    • Image transmission: latency 960p50: 70 ms; 720p60: 60ms; 480p50: 50 ms
    • Max. Range 2.4 GHz 7 km (FCC); 4 km (CE); 4 km (SRRC)
    • Max. Range 5.8 GHz 4 km (FCC); 0.7 km (CE); 4 km (SRRC)
    • Recommended frequency bands 5.8 GHz; CE: 2.4 GHz; SRRC: 5.8 GHz
    • Video format MP4 (MPEG4)
    • I / O Connections S.Bus, Micro-USB, PPM, UART, MMCX, microSD card slot
    • Supported flight controllers F3, F4, KISS, NAZE
    • Supported remote controls X9D (Frsky), DEVO 10 (Walkera), T8FG (Futaba), T14SG (Futaba), WTF09sll (WFLY), AT9S (RadioLink)
    • Operating temperature 0 to 40 ° C
    • Input power 9-16,8 V (3S-4S)
    • Sensor 1/3 "CMOS; Effective Pixels: 1.2M
    • Lenses 2.65 mm, f / 2.0
    • Lens group 6G + IR
    • Closure Global Shutter
    • ISO 100 - 3200
    • Field of view 148 ° (D); 111 ° (H); 79.5 ° (V)

    DJI OCUSYNC AIR SYSTEM

    • Weight air unit: 43.7 g; Camera (cable included): 18.2 gPagoda antenna: 9.4 g; Cylindrical antenna: 9.4 g; dipole antenna: 4.2 g
    • Dimensions air unit 72 × 33 × 14 mm
    • Camera 29.4 × 28.2 × 22.6 mm

    Content:

    • 1x DJI goggles
    • 1x Charger
    • 1x wire clip
    • 2x Pagoda Antenna (SMA interface)
    • 1x reversed SMA connector
    • 1x Micro USB Cable
    • 1x HDMI cable
    • 1x Cleaning Cloth
    SKU: DJII015610
    €599.00
    inc. VAT

     72HR STOCK
  • DJI Goggles Racing Edition - MMCX to SMA Cable (Part 10)

    DJI Goggles Racing Edition - MMCX to SMA Cable (Part 10)

    DJI Goggles Racing Edition - MMCX to SMA Cable (Part 10)

    SKU: DJII015782
    €9.00
    inc. VAT

  • DJI H3-3D Standard Version Anti-drop Damping Bracket Replacement (10pcs)

    DJI H3-3D Standard Version Anti-drop Damping Bracket Replacement (10pcs)

    DJI Gimbal H3-3D Part ZH3-3D-40 Damping unit securing kits Use for DIFFERENT gimbals. (10pcs)

    SKU: DJIPHM-SP-01
    €3.00
    inc. VAT

     IN STOCK
  • DJI Inspire 1 Lipo Battery TB47 4700maH 6S

    DJI Inspire 1 Lipo Battery TB47 4700maH 6S

     DJI Inspire 1 Lipo Battery TB47 4700maH

    Standard size pack for Inspire One.

    When in flight, your remaining battery power is shown live on the dji app, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back.
    The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your DJI Inspire 1 in the air and flying for years to come.

    Specifications:

    • Name  - Intelligent Flight Battery
    • Model - TB47
    • Capacity - 4500 mAh
    • Voltage - 22.2 V
    • Battery Type - LiPo 6S High voltage battery
    • Energy - 99.9 Wh
    • Net Weight - 570 g
    • Operating Temperature Range -20° to 40° C
    • Storage Temperature Range - Less than 3 months: -20° to 45° C
    • More than 3 months: 22° C to 28° C
    • Charging Temperature Range - 0° to 40° C
    • Max Charging Power - 180 W
    • Max flight time: approximately 18 minutes
    • Only compatible with the Inspire 1
    SKU: DJI-INSP1-TB47
    €199.00
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 PRO Quadcopter with Zemuse X5 4K Camera and 3-Axis Gimbal & Single Radio TX

    DJI Inspire 1 PRO Quadcopter with Zemuse X5 4K Camera and 3-Axis Gimbal & Single Radio TX

    DJI Inspire 1 PRO Quadcopter with Zemuse X5 4K Camera and 3-Axis Gimbal & Single Radio TX

    A Micro Four Thirds CMOS sensor with 4K image capture is introduced to DJI's quadcopter line with the Inspire 1 PRO featuring the Zenmuse X5 camera and gimbal system along with a 15mm f/1.7 lens. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards and can also beam a live 720p feed to a mobile device running the DJI GO app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.
    As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that - thanks to spatial awareness - is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Position technology - combining optical flow with ultrasonics - to provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).

    What Ready-to-Fly Means
    This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required - in particular, no assembly that requires soldering. It is important - as with any multi-rotor - to follow the user guide to ensure proper calibration before embarking on your first flight
    Integrated 4K Camera with MFT Mount and 15mm Lens

    Micro Four Thirds Sensor with MFT Mount
    Sporting a Micro Four Thirds CMOS sensor, the Inspire 1 PRO introduces mirrorless camera performance to the Inspire series. The featuring a standard MFT mount, the Zenmuse X5 camera includes the Panasonic Lumix 15mm f/1.7 lens, and also works with the separately available Olympus M. ED 12mm f/2.0 lens

    4K and HD Video Capture
    The Zenmuse X5 is able to capture video at up to DCI 4K 4096 x 2160 at 23.98p or UHD 4K at 29.97p

    16MP Stills Capability
    Not just for video, the Zenmuse X5 can snap still from the air at up to 16MP resolution. In addition to single-shot, the camera support busts of 3, 5, or 7 frames and can take time-lapse at stepped intervals of between three and 60 seconds

    3-Axis Gimbal
    The Zenmuse X5 camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter

    Live HD View
    A real-time feed from the Zenmuse X5 camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles
    For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device's battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter

    Modular Gimbal and Camera
    The Zenmuse X5 gimbal and camera assembly can be removed from the Inspire 1 for safe transport and future upgrades

    Airframe Design:

    Retractable Carbon Fiber Arms
    The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio

    Aerodynamic Design
    Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life

    Flight Control System

    Fly Indoors and Without GPS
    DJI's Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable

    App-Based Control Software
    Everything from manual camera controls to flight telemetry - even auto takeoff and landing - can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System

    Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required

    Manual Mode
    Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want

    Live Map and Radar
    See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path

    Dynamic Home Point
    When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function

    Auto-Takeoff and Landing
    Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land

    Transmitter Customization
    Put yourself in charge by tailoring the Inspire 1's controls to your personal needs. This way, your Inspire 1 moves and responds in ways you're most comfortable with

    Transmitter (Radio Controller)

    Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery

    Use Two Transmitters
    For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time

    Smart Battery System

    Smart Power Management
    The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home

    Automated Charging
    The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status

    Product Highlights:

    • 4K MFT Camera with 3-Axis Gimbal
    • 15mm f/1.7 Lens Included
    • Up to 1.2 Mile Radio Range
    • GPS-Based Stabilization System
    • Optical Flow Sensor for Indoor Flying
    • DJI Lightbridge System Integrated
    • Live 720p HD Monitoring with Lightbridge
    • Retractable Carbon Fiber Arms
    • Unobstructed 360° Shooting
    • Dual Transmitter Operation Supported

     

    SKU: DJI-INSPIRE1-PRO
    €3499.00 €4999.00
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 Propeller Lock Set

    DJI Inspire 1 Propeller Lock Set

    DJI Inspire 1 Propeller Lock Set

    6 Per Pack
    SKU: DJI-1189
    €3.50
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 RAW Quadcopter with Zemuse X5R 4K Camera and 3-Axis Gimbal & 2 Radio TX

    DJI Inspire 1 RAW Quadcopter with Zemuse X5R 4K Camera and 3-Axis Gimbal & 2 Radio TX

    DJI Inspire 1 RAW Quadcopter with Zemuse X5R 4K Camera and 3-Axis Gimbal & 2 Radio TX

    A Micro Four Thirds CMOS sensor with 4K image capture is introduced to DJI's quadcopter line with the Inspire 1 PRO featuring the Zenmuse X5 camera and gimbal system along with a 15mm f/1.7 lens. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards and can also beam a live 720p feed to a mobile device running the DJI GO app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.
    As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that - thanks to spatial awareness - is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Position technology - combining optical flow with ultrasonics - to provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).

    What Ready-to-Fly Means
    This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required - in particular, no assembly that requires soldering. It is important - as with any multi-rotor - to follow the user guide to ensure proper calibration before embarking on your first flight
    Integrated 4K Camera with MFT Mount and 15mm Lens

    Micro Four Thirds Sensor with MFT Mount
    Sporting a Micro Four Thirds CMOS sensor, the Inspire 1 PRO introduces mirrorless camera performance to the Inspire series. The featuring a standard MFT mount, the Zenmuse X5 camera includes the Panasonic Lumix 15mm f/1.7 lens, and also works with the separately available Olympus M. ED 12mm f/2.0 lens

    4K and HD Video Capture
    The Zenmuse X5 is able to capture video at up to DCI 4K 4096 x 2160 at 23.98p or UHD 4K at 29.97p

    16MP Stills Capability
    Not just for video, the Zenmuse X5 can snap still from the air at up to 16MP resolution. In addition to single-shot, the camera support busts of 3, 5, or 7 frames and can take time-lapse at stepped intervals of between three and 60 seconds

    3-Axis Gimbal
    The Zenmuse X5 camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter

    Live HD View
    A real-time feed from the Zenmuse X5 camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles
    For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device's battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter

    Modular Gimbal and Camera
    The Zenmuse X5 gimbal and camera assembly can be removed from the Inspire 1 for safe transport and future upgrades

    Airframe Design:

    Retractable Carbon Fiber Arms
    The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio

    Aerodynamic Design
    Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life

    Flight Control System

    Fly Indoors and Without GPS
    DJI's Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable

    App-Based Control Software
    Everything from manual camera controls to flight telemetry - even auto takeoff and landing - can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System

    Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required

    Manual Mode
    Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want

    Live Map and Radar
    See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path

    Dynamic Home Point
    When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function

    Auto-Takeoff and Landing
    Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land

    Transmitter Customization
    Put yourself in charge by tailoring the Inspire 1's controls to your personal needs. This way, your Inspire 1 moves and responds in ways you're most comfortable with

    Transmitter (Radio Controller)

    Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery

    Use Two Transmitters
    For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time

    Smart Battery System

    Smart Power Management
    The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home

    Automated Charging
    The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status

    Product Highlights:

    • 4K MFT Camera with 3-Axis Gimbal
    • 15mm f/1.7 Lens Included
    • Up to 1.2 Mile Radio Range
    • GPS-Based Stabilization System
    • Optical Flow Sensor for Indoor Flying
    • DJI Lightbridge System Integrated
    • Live 720p HD Monitoring with Lightbridge
    • Retractable Carbon Fiber Arms
    • Unobstructed 360° Shooting
    • Dual Transmitter Operation Supported

     

    SKU: DJI-INSPIRE1-RAW
    €5899.00 €6699.00
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 Spare Lipo Battery High Capacity 5700maH 6S

    DJI Inspire 1 Spare Lipo Battery High Capacity 5700maH 6S

    Spare Lipo Battery High Capacity TB48 5700maH 6S for Extended Flight Time

    Specification:

    • Capacity 5700 mAh
    • Voltage  22.8 V
    • Battery Type LiPo 6S
    • Capacity 5700mAh
    • Energy 129.96 Wh
    • Net Weight 670 g
    • Operating Temperature Range -10 to 40° C
    • Storage Temperature Range
    • Less than 3 months: -20 to 45° C
    • More than 3 months: 22° to 28° C
    • Charging Temperature Range 0° to 40° C
    • Max Charging Power 180 W
    • Max flight time: approximately 22 minutes
    • Only compatible with the Inspire 1

    SKU: DJI-INSP1-TB48
    €229.00
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 V2.0 (Dual Remote) RTF with 4K video recording

    DJI Inspire 1 V2.0 (Dual Remote) RTF with 4K video recording

    DJI’s most advanced technology comes together in an easy to use, all-in-one flying platform that empowers you to create the unforgettable.

    TRANSFORMING DESIGN
    Strong carbon fiber arms lift out of sight, transforming the way you shoot. Get a full, unrestricted 360⁰
    view of the world below and create images like never before.

    4K CAMERA
    Shoot up to 4K video and capture 12 megapixel photos with the Inspire 1 camera. The lens consists of 9 elements in 9 groups including an aspherical element producing extreme clarity, while Adobe DNG RAW support gives you the power to make every shot a masterpiece. Everything is better in 4K.

    FULL-FEATURED APP

    Take complete control of your camera and flight system with a comprehensive mobile app. Everything
    from manual camera controls to flight telemetry and even auto takeoff and landing are just a tap away,
    with more functions and updates coming soon.

    INTELLIGENT POWER  MANAGEMENT SYSTEM

    A fully integrated intelligent battery powers your Inspire 1 and virtually manages itself.
    When in flight, your remaining battery power is shown live, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back.
    The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your Inspire 1 in the air and flying for years to come.

    MANUAL MODE
    Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want.

    LIVE MAP AND RADAR
    See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed and shows your most recent flight path.

    DYNAMIC HOME POINT
    When GPS signal is available on the remote, the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function.

    AUTO-TAKEOFF AND LANDING
    Takeoff and landing is easier than ever before, with both functions just a tap away. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land.

    FLIGHT TELEMETRY
    All of the information you need to fly safely is just a glance away. Altitude, flight speed, distance, and more are right at your fingertips.

    REMOTE CONTROL CUSTOMIZATION
    Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable with.

    A COMPLETE READY-TO-FLY SYSTEM

    Everything you need is included and ready to go offering you a complete aerial film making tool in a box. Just add a mobile device or screen for live HD view.

    FLY INDOORS AND WITHOUT GPS USING VISION POSITIONING SYSTEM
    Indoor flight has always been a true test of skill for all levels of pilots. DJI’s new Optical Flow technology uses a specially designed camera as well as sonic waves to bring simplicity to flying indoors. This technology allows the Inspire to hold its position, stop when the controls are released, and respond to your commands even when GPS is unavailable.

    A tool for serious videographers and photographers
    DJI has packed just about every feature a videographer — or photographer — could want into the Inspire 1. The camera features a 9-element lens, and can capture 4K video at 24 fps, or 1080p video at 60 fps. It can also capture 12-megapixel stills. The improved 3-axis gimbal is designed to smooth out the vibrations from the rotors and small movements during flight. A new ground-facing system called Optical Flow incorporates both a camera and ultrasonic sensors to provide safer indoor flight — when GPS is typically not available.

    Beyond the basic specs, the Inspire 1’s camera can be operated in full-manual mode. White balance, ISO, Exposure, and other settings can be controlled from the ground. With its new version of DJI’s LightBridge technology, the operators can see the drone’s video feed as far as a mile away. Of course, that’s going to mean that you want a color accurate preview display, and if you’re outdoors maybe even some type of shade on the display used by the camera operator.

     

    Specification:

    • DJI Inspire
    • Weight (Incl. Battery): 2935g
    • Hovering Accuracy (GPS mode): 0.5m(Vertical), 2.5m (Horizontal)
    • Max Angular Velocity: 300°/s(Pitch), 150°/s (Yaw)
    • Max Tilt Angle: 35°
    • Max Ascent Speed: 5m/s
    • Max Descent Speed: 4m/s
    • Max Speed: 22m/s (ATTI mode, no wind)
    • Max Flight Altitude: 4500m
    • Max Wind Speed Resistance: 10m/s
    • Max Flight Time: Appro. 18 minutes
    • Motor Model: DJI 3510
    • Propeller Model: DJI 1345
    • Indoor Hovering: Enabled(Default)
    • Diagonal Distance: 559 to 581mm
    • Dimensions: 438x451x301mm

    Included in the package:

    Inspire 1 Ready to fly, premounted.
    1x Camera FC350 with Gimbal ZENMUSE X3
    1x Support for Tablet/Smartphone
    2 x Radio transmitter
    1x Battery pack TB47 (6S 22.2V 4500mAh)
    4x Prop pairs 13x4.5"
    1x Radio charge cord
    1x 220 Charger

    SKU: INSPIRE1DUO
    €2799.00 €3499.00
    inc. VAT

     72HR STOCK
  • DJI Inspire 1 V2.0 (Single Remote) RTF with 4K video recording

    DJI Inspire 1 V2.0 (Single Remote) RTF with 4K video recording

    DJI’s most advanced technology comes together in an easy to use, all-in-one flying platform that empowers you to create the unforgettable.

    TRANSFORMING DESIGN
    Strong carbon fiber arms lift out of sight, transforming the way you shoot. Get a full, unrestricted 360⁰
    view of the world below and create images like never before.

    4K CAMERA
    Shoot up to 4K video and capture 12 megapixel photos with the Inspire 1 camera. The lens consists of 9 elements in 9 groups including an aspherical element producing extreme clarity, while Adobe DNG RAW support gives you the power to make every shot a masterpiece. Everything is better in 4K.

    FULL-FEATURED APP

    Take complete control of your camera and flight system with a comprehensive mobile app. Everything
    from manual camera controls to flight telemetry and even auto takeoff and landing are just a tap away,
    with more functions and updates coming soon.

    INTELLIGENT POWER  MANAGEMENT SYSTEM

    A fully integrated intelligent battery powers your Inspire 1 and virtually manages itself.
    When in flight, your remaining battery power is shown live, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back.
    The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your Inspire 1 in the air and flying for years to come.

    MANUAL MODE
    Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want.

    LIVE MAP AND RADAR
    See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed and shows your most recent flight path.

    DYNAMIC HOME POINT
    When GPS signal is available on the remote, the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function.

    AUTO-TAKEOFF AND LANDING
    Takeoff and landing is easier than ever before, with both functions just a tap away. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land.

    FLIGHT TELEMETRY
    All of the information you need to fly safely is just a glance away. Altitude, flight speed, distance, and more are right at your fingertips.

    REMOTE CONTROL CUSTOMIZATION
    Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable with.

    A COMPLETE READY-TO-FLY SYSTEM

    Everything you need is included and ready to go offering you a complete aerial film making tool in a box. Just add a mobile device or screen for live HD view.

    FLY INDOORS AND WITHOUT GPS USING VISION POSITIONING SYSTEM
    Indoor flight has always been a true test of skill for all levels of pilots. DJI’s new Optical Flow technology uses a specially designed camera as well as sonic waves to bring simplicity to flying indoors. This technology allows the Inspire to hold its position, stop when the controls are released, and respond to your commands even when GPS is unavailable.

    A tool for serious videographers and photographers
    DJI has packed just about every feature a videographer — or photographer — could want into the Inspire 1. The camera features a 9-element lens, and can capture 4K video at 24 fps, or 1080p video at 60 fps. It can also capture 12-megapixel stills. The improved 3-axis gimbal is designed to smooth out the vibrations from the rotors and small movements during flight. A new ground-facing system called Optical Flow incorporates both a camera and ultrasonic sensors to provide safer indoor flight — when GPS is typically not available.

    Beyond the basic specs, the Inspire 1’s camera can be operated in full-manual mode. White balance, ISO, Exposure, and other settings can be controlled from the ground. With its new version of DJI’s LightBridge technology, the operators can see the drone’s video feed as far as a mile away. Of course, that’s going to mean that you want a color accurate preview display, and if you’re outdoors maybe even some type of shade on the display used by the camera operator.

    Specification:

    • DJI Inspire
    • Weight (Incl. Battery): 2935g
    • Hovering Accuracy (GPS mode): 0.5m(Vertical), 2.5m (Horizontal)
    • Max Angular Velocity: 300°/s(Pitch), 150°/s (Yaw)
    • Max Tilt Angle: 35°
    • Max Ascent Speed: 5m/s
    • Max Descent Speed: 4m/s
    • Max Speed: 22m/s (ATTI mode, no wind)
    • Max Flight Altitude: 4500m
    • Max Wind Speed Resistance: 10m/s
    • Max Flight Time: Appro. 18 minutes
    • Motor Model: DJI 3510
    • Propeller Model: DJI 1345
    • Indoor Hovering: Enabled(Default)
    • Diagonal Distance: 559 to 581mm
    • Dimensions: 438x451x301mm

    Included in the package:

    Inspire 1 Ready to fly, premounted.
    1x Camera FC350 with Gimbal ZENMUSE X3
    1x Support for Tablet/Smartphone
    1x Radio transmitter
    1x Battery pack TB47 (6S 22.2V 4500mAh)
    4x Prop pairs 13x4.5"
    1x Radio charge cord
    1x 220 Charger

    SKU: INSPIRE1S
    €2299.00 €3199.00
    inc. VAT

     72HR STOCK
  • DJI IOSD (ON SCREEN DISPLAY) MARK II

    DJI IOSD (ON SCREEN DISPLAY) MARK II

    The iOSD Mark II On Screen Display is for the DJI Wookong M AutoPilot and Ace One series AutoPilots. The iOSD On Screen Display enables the pilot to monitor the real-time flight data from the Wookong M WKM or Ace One Autopilot systems while in flight using First Person View (FPV).

    The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)

    The DJI iOSD will allow you to view the following information:

    • Voltage
    • Vertical velocity
    • Horizontal velocity
    • Height
    • Distance from home point
    • Horizontal Altitude
    • GPS satellite number

    The iOSD is a multifunctional integrated on screen display module which also has a built-in BEC module that supports 3s-6s LiPo batteries (11-26 volts), when used with the Wookong M or Ace One professional autopilot systems, it delivers a total solution for aerial photography with key information clearly displayed around the outside of the screen.

    The DJI Innovations iOSD only supports the Wookong M AutoPilot and Ace One systems at this time. The iOSD supports two video input sources, one of which can be selected by the R/C transmitter and switched remotely. It can also change the wireless the transmission channel using the wireless video transmission module by DJI. The iOSD can be upgrade in the future by firmware updates.

    SKU: DJI_IOSD_MKII
    €195.00
    inc. VAT

     LOW STOCK
  • DJI iOSD Mini DJI

    DJI iOSD Mini DJI

    The Naza-M now supports iOSD Mini. This will undoubtedly give you a fantastic FPV flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD Mini can grab the most accurate first-hand flight data information in the shortest possible time.

    Technical Specs:

    • Voltage: 6V
    • Working Temperature: -20℃~+60℃
    • Video Input/Output Mode: PAL/NTSC (automatically recognize)
    • Weight: 14g
    • Working Current (Typical Value): 180mA@6V
    SKU: DJI_IOSD_MINI
    €64.99
    inc. VAT

     IN STOCK
  • DJI Mavic 8330 Quick-Release Props Cw & CCW (1 pair)

    DJI Mavic 8330 Quick-Release Props Cw & CCW (1 pair)

    DJI Mavic 8330 Quick-Release Props Cw & CCW (1 pair)

    SKU: DJI-MAVIC-PART22
    €9.00
    inc. VAT

  • DJI Mavic Air (Colors Available)

    DJI Mavic Air (Colors Available)

    The Mavic Air is the most portable DJI drone to house a 3-axis mechanical gimbal, with its angular vibration range reduced to 0.005°. Set in a triangular formation, gimbal dampeners help create even steadier shots. In addition to Horizontal, Vertical, and 180° panoramas, the Mavic Air stitches 25 photos together in just eight seconds to create crystal-clear 32 MP Sphere panoramas. View them from an immersive perspective with DJI Goggles.

    A marvel of engineering and design, the Mavic Air was built to go wherever adventure takes you. Inheriting the best of the Mavic series, this ultraportable and foldable drone features high-end flight performance and functionality for limitless exploration.

    3-Axis Gimbal Camera
    The Mavic Air is the most portable DJI drone to house a 3-axis mechanical gimbal, with its angular vibration range reduced to 0.005°. Set in a triangular formation, gimbal dampeners help create even steadier shots.

    32 MP Sphere Panoramas
    In addition to Horizontal, Vertical, and 180° panoramas, the Mavic Air stitches 25 photos together in just eight seconds to create crystal-clear 32 MP Sphere panoramas.1 View them from an immersive perspective with DJI Goggles.

    4K 100 Mbps Video
    The Mavic Air shoots video at an incredible 4K 30 fps, recording at 100 Mbps to capture every second with UHD quality.

    Slow-Motion Video
    With support for recording 1080p 120 fps slow-motion video, the Mavic Air captures all your epic high-speed adventures.

    HDR Photos
    New HDR algorithms help you obtain the right exposure settings intelligently, according to lighting conditions. Overexposed or dark areas are processed for more natural transitions between highlights and shadows, while DSP acceleration allows for more efficient shooting

    12 MP Stills
    The Mavic Air’s onboard camera integrates a 1/2.3” 12-megapixel CMOS sensor and an f/2.8 lens with a 35-mm equivalent focal length of 24 mm to shoot high-quality photos and videos.

    8 GB Internal Storage
    In addition to a Micro SD card slot, 8 GB of internal storage let you save photos and videos directly to the aircraft and export files through its USB 3.0 Type-C port.

    Design
    Built for Every Adventure

    Geometric Elegance
    Expressing geometric precision, the Mavic Air's arms fold flush against its aerodynamic chassis. Magnesium alloy brackets reinforce the seven onboard cameras, rear vents dissipate heat efficiently, and the primary gimbal camera is recessed for better protection.

    3D Foldable Design
    As tall and wide as a smartphone when folded, the Mavic Air is an ultraportable drone that stretches the boundaries of what's possible for a device its size.

    Foldable Remote Controller
    The dedicated remote controller uses a foldable, low-profile, ergonomic design to hold your smartphone for maximum convenience. Detachable control sticks store inside the remote controller to pack more comfortably on the go.

    Intelligent & Intuitive
    Easy to Use, Fun to Fly

    ActiveTrack
    ActiveTrack can sense up to 16 selectable subjects simultaneously,2 letting you choose the right tracking subject. With higher tracking precision and broader scenario applications, ActiveTrack follows targets even when they're running, jumping, or cycling.

    QuickShots
    Choose from six different QuickShots — Rocket, Dronie, Circle, Helix, Asteroid, and Boomerang. All are just a tap away and will get you those epic selfie drone videos without needing to think about composing your shot. Share your new creations to social media through the DJI GO 4 app instantly.

    SmartCapture
    Fun, simple, and intuitive, SmartCapture offers a new and interactive way of controlling the Mavic Air by hand. Launch and control the drone with hand gestures, then take photos or videos however you like.

    TapFly
    If you want to focus on just your shot, select TapFly in DJI GO 4, which lets you fly wherever you tap on your mobile device screen. TapFly works in Forward, Backward, Free, and Coordinate modes, and you can adjust flight speed to suit all your aerial needs.

    Flight Safety
    Vision-Based Protection

    FlightAutonomy 2.0
    Using advanced VIO technology, the powerful sensor system in FlightAutonomy 2.0 consists of a primary gimbal camera, forward, backward, and downward dual-vision sensors, downward infrared sensing system, IMU redundancies, and a group of computing cores. Together, they collect and transmit information from the surrounding environment to the high-performance processor for more precise hovering and better flight performance. Advanced Pilot Assistance Systems (APAS) allow the aircraft to bypass obstacles in front of and behind it actively. Your grand adventures of discovery have never been so safe and easy.

    Flight Performance
    The Thrill of Flight

    Max Flight Time: 21 min
    Mavic Air Intelligent Flight Batteries are made with high-density lihium, offering a substantial flight time of up to 21 minutes for all your adventuring needs.

    FOC ESCs & Propulsion
    The application of FOC sinusoidal drive architecture ESCs provides the Mavic Air with a smoother motor commutation process and higher overall efficiency of both motors and ESCs.

    Max Speed: 68.4 kph
    Feel the rush and thrill of first class drone flight with top speeds of 68.4 kph in Sport Mode.

    Enhanced Wi-Fi Video Transmission
    A new Wi-Fi video transmission system supports dual frequency bands of 2.4/5.8GHz and a 720p live view from up to 4 km away.

    DJI Goggles
    Pair the Mavic Air with DJI Goggles for FPV flight, and take to the skies for an immersive aerial adventure!

    Contents

    • Mavic air Aircraft
    • Remote Controller
    • Intelligent Flight Battery
    • Battery Charger
    • Power cable
    • Propellers (4 pairs)
    • Propeller Guards (set)
    • RC Cable (Lightning connector)
    • RC Cable (Standard Micro USB connector)
    • RC Cable (USB Type-C connector)
    • Gimbal Protector
    • Communication Cable (USB 3.0 Type C)
    • USB Adaptor
    • RC Cable Slider (Large)
    • RC Cable Slider (Small)
    • Carrying Case
    • Spare Control Sticks
    • Battery Charging Hub
    • Battery to Power Bank Adaptor
    • Travel Bag

     

    SKU: DJI-MAVIC-AIR-11
    €849.00
    inc. VAT

     72HR STOCK
  • DJI Mavic Air Battery Charger (without AC Cable)

    DJI Mavic Air Battery Charger (without AC Cable)

    The Mavic Air Battery Charger is used to charge the Mavic Air Intelligent Flight Battery and remote controller by connecting to a power outlet.


    By connecting to the USB port, it can also provide power to mobile devices such as smart phones or tablets.

    Tips:

    • This charger does not include AC cables.

    In the Box:

    • Battery Charger (Without AC Cable) × 1

    Specifications:

    • Product Model: P1C50
    • Input Voltage: 100-240 V; 50-60 Hz
    • Output:
    • Main: 13.2 V, 3.79 A
    • USB: 5 V, 2 A (Total)
    • Rated Power: 50 W
    • Charging Temperature: 5° to 40° C (41° to 104?)
    • Charging Time*:
    • Intelligent Flight Battery:
    • 55 min 60° to 104° F (16° to 40° C)
    • 1 hr 35 min 41° to 59° F (5° to 15° C)
    • Remote Controller: 2 hr 10 min
    • *It will take a longer time to charge the Intelligent Flight Battery and remote controller together.

    Compatibility:

    • Mavic Air
    • Mavic Air Battery Charging Hub
    • 100W Power Adaptor AC Cable
    SKU: DJI-MA-PART3
    €19.00
    inc. VAT

     72HR STOCK
    NEW
  • DJI Mavic Air Battery to Power Bank Adapter

    DJI Mavic Air Battery to Power Bank Adapter

    The Mavic Air Battery to Power Bank Adaptor is designed to provide power from the Mavic Air Intelligent Flight Battery to mobile devices such as smart phones or tablets.

    Use the Mavic Air Intelligent Flight Battery as a power bank.

    Highlights:

    • Charge mobile devices using the remaining battery level.

    In the Box:

    • Battery to Power Bank Adapter × 1

    Specifications:

    • Product Model: PD03
    • Input: 9.6-14 V, 3 A
    • Output: USB Type-A; 5 V, 2 A

    Compatibility:

    • Mavic Air Intelligent Flight Battery
    SKU: DJI-MA-PART5
    €19.00
    inc. VAT

     72HR STOCK
    NEW
  • DJI Mavic Air Car Charger

    DJI Mavic Air Car Charger

    The Mavic Air Car Charger is used to charge the Intelligent Flight Battery through the car's 12 V accessory socket.

    It comes with low-voltage protection to ensure enough starting battery voltage for the car.

    Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature.

    In the Box:

    • Car Charger × 1

    Specifications:

    • Product Model: C3S60
    • Operating Temperature: 41° to 104° F (5° to 40° C)
    • Input Voltage: 12-16 V (Sedan); Coach not supported
    • DC Output: 13.2 V; 4.54 A
    • Charge Time*:
    • 48 min 60° to 104° F (16° to 40° C)
    • 1 hr 37 min 41° to 59° F (5° to 15° C)
    • *Charging times were tested in a lab environment and should be taken as reference only.

    Compatibility:

    • Mavic Air
    • Mavic Air Battery Charging Hub
    SKU: DJI-MA-PART4
    €53.00
    inc. VAT

     72HR STOCK
    NEW

Manufacturers