Goblin 700, Competition

Aluminum Frame Support (4pcs) for Goblin 630/700/770

Aluminum Main Servo Mount for Goblin 630/700/770

Aluminum Tail Blade Grip for Goblin 630/700/770

Includes

• 2 x Aluminum Tail Blade Grip
• 4 x Bearing Ø5 x Ø9 x 3
• 2 x Socket Head Cap Screw M3x16mm

Aluminum Tail Case Spacer for Goblin 630/700/770

Included items:

•  2 x Aluminum Tail Case Spacer
•  4 x Socket Head Cap Screw M3x8mm

Antenna Guide for Goblin 630/700/770

Includes

• 2 x ANTENNA GUIDE 
• 2 x Button Head Cap Screw M3x4mm

2 x High Quality ABEC-5 Bearings  Ø10 x Ø15 x 4 for Goblin 630/700/770

ABEC-5 Bearing 12 x 24 x 6 (2pcs) for Goblin 630/700/770

ABEC-5 Bearing 5 x 9 x 3 - (4pcs) for Goblin 630/700/770

Button Head Socket Cap M3x4 for Goblin 630/700/770

Includes:

• DIN 12.9 Button Head Socket Cap M3x4 x 5pcs

Canopy Orings (5pcs) for Goblin 630/700/770

Canopy Positioner (2pcs) for Goblin 630/700/770

Carbon Fiber Battery Tray for Goblin 630/700/770

Includes:

• Carbon Fiber Battery Tray x 1pc
• Carbon Fiber Battery Protection Plate x 1pc
• CNC Aluminum Cylinder Posts M2.5 x 2pcs
• Heat Shrink 350mm x 1pc
• DIN 12.9 Flat Head Cap Screw M2.5x5 x 2pcs
  

This is a battery plate set for the Goblin. Allows for quick change of flight batteries, and at the same time the two carbon plates protect the battery packs. This tray set requires your Goblin to be fitted with the cnc battery tray stopper (H0150-S).

Carbon Fiber Landing Gear Stiffener for Goblin 630/700/770

Carbon Fiber Tail Boom Lock for Goblin 630/700/770

Includes:

• 1 x Carbon Fiber Tail Boom Lock
• 1 x FINISHING WASHER
• 1 x Socket Head Cap Screw M3x8mm

Carbon Fiber Tail Case Side for Goblin 630/700/770

Includes:

• 1 x Carbon Fiber Tail Case Side
• 2 x FINISHING WASHER
• 2 x Socket Head Cap Screw M3x12mm

Carbon Fiber Tail Locking Reinforcement (2pcs) for Goblin 630/700/770

Includes:

• 2 x Carbon Fiber Tail Locking Reinforcement (2pcs)
• 2 x double-side tapes
• 4 x M3 locknuts

Carbon Fiber Vertical Fin for Goblin 630/700/770

Includes:

• 1 x Carbon Fiber Vertical Fin
• 2 x FINISHING WASHER
• 2 x Socket Head Cap Screw M3x12mm

DIN 12.9 Cup Point Set Screws M3X20 (5pcs) for Goblin 630/700/770

Cup Point Set Screws M5x20mm (5pcs) for Goblin 630/700/770

Delrin Tecno Dampener HPS for Goblin 630/700/770

Includes:

• CNC Delrin Dampener x 2pcs
• Brass Shims D10 x D16 x 1 x 2pcs
• Steel Shims D10 x D16 x 0,2 x 4pcs
• O-ring 3050 x 4pcs

These are replacement delrin dampers for the Goblin HPS head system. These provide long life and perfect dampening for the Goblin helicopter.

For:

• Goblin 630/700 HPS head only
• Goblin 770 HPS head

DIN 12.9 Button Head Socket Cap M4x8 (5pcs) for Goblin 630/700/770

ABEC-5 Flanged bearing 3 x 7 x3 (4pcs) for Goblin 630/700/770

ABEC-5 Flanged bearing 5 x 9 x 3 (4pcs) for Goblin 630/700/770

Flat Head Socket Cap M3x8 (5pcs) for Goblin 630/700/770

Flybarless Support for Goblin 630/700/770

Includes:

• 3 x Flybarless Support
• 1 x SUPPORTO FLYBARLESS
• 1 x Flat Head Socket Cap Screw M3x8mm
• 5 x Socket Head Cap Screw M3x6mm

High Performance HTD Motor Belt for Goblin 630/700/770

Landing Gear Protector for Goblin 630/700/770

Included items:

• 4 x Landing Gear Protector
• 4 x Socket Head Cap Screw M2.5x6mm

Metric hex locknut Nuts M5 H4,8 (5pcs) for Goblin 630/700/770

Low Profile Carbon Fiber landing gear for Goblin 630/700/770 - Yellow (1pc)

The new 37T main pulley which is the replacement for the old 36T pulley (H0016-S) is designed to increase the tail ratio a bit (New tail gear ratio is 4.67:1 compares to 4.53:1 of the old pulley) to improve tail performance and authority. In addition the new pulley comes with new screws.

Main Shaft Bearing Support w/Bearing for Goblin 630/700/770

Included items:

• 1 x Main Shaft Bearing Support w/Bearing
• 1 x Bearing  Ø12 x Ø24 x 6
• 3 x Flat Head Socket Cap Screw M2.5x5mm

Motor Pulley 18T for Goblin 630/700/770

Motor Pulley 20T for Goblin 630/700/770

Included items:

• 1 x Motor Pulley 20T
• 2 x Cone Point Set Screws M4x4mm

Motor Pulley 21T for Goblin 630/700/770

Includes:

• 1 x Motor Pulley 21T
• 2 x Cone Point Set Screws M4x4mm

Motor Pulley 22T for Goblin 630/700/770

Included items:

• 1 x Motor Pulley 22T
• 2 x Cone Point Set Screws M4x4mm

Motor Pulley 23T for Goblin 630/700/770

Included items:

• 1 x Motor Pulley 23T
• 2 x Cone Point Set Screws M4x4mm