Upgrades Mikado Logo

Aluminum CNC Main & small Belt Pulley, LOGO500~690/SE/SX Series

The driving gear is made of top quality POM material,
integrated with high hardness of metal and abrasive resistance of plastics.Its shape and position hole benefit from simultaneous manufacturing with precision numerical control machines,
thus high precision and excellent concentricity are guaranteed.The metal rings are CNC precisely machined with 6061-T6 alloy. They are tightly embedded in the POM wheel, and fixed by several screws,
making the parts form a perfect unit with high strength, capable of large load capacity.CNC gear hobbing machine contributes to the high precision of driving gear,
and solves those problems found in stock plastic gear,
such as slippage phenomenon and beating problem.

Contains:

• 1x Main belt pulley
• 1x Steel shaft
• 1x small belt pulley

Spedix Carbon Fiber Main Frame Stiffener for Logo 500 / 600 / 600SE

This carbon fiber stiffener can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash.
With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes.
The carbon fieber parts are CNC precision cut from light and strong plates.
The kit includes two carbon fiber plates, six set of hex screws and bolts.

Carbon Fiber Tail Fin for Spedix Logo 600 Tail gearbox

Carbon fiber tail fin that can be used together with Spedix Logo 600 series integrated tail box.
Weight: 28 g / 1oz

Chassis Upgrade Set

Compatible with:

• LOGO 600
• LOGO 690

The best you can allow- CNC tuning Arms set for Logo helicopters. Now you can fly complete Alu CNC head.

Produced in Europe, made from 7075 material, in black anodized finish to fit the existing Mikado logo head.

Those arms will use existing bearings and hardware, all you need will be included in the set.
 

What is the advantage of CNC metal over plastic? Tests reports pointed on mainly those advantages:

•  Less flex , means more precise flying performance.
•  No influence of weather, e.g hot weather will not make the grips softer and vice versa.
•  Silent- been smaller than Plastic, less drag and better flying noise, Efficiency..

Stainless inserts will insure perfect support for blade screws by removing inertia load.

This arm set for Mikado Logo 500-550 series. Set include 2 Grips with Hardware.
Bearing and other items to be used from stock head.

Spedix Main Frame Stiffener Combo for Logo 500 / 600 / 600SE

This combo can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash.
Metal pieces reinforce connections between landing skids and the main frame by transfering impact to stornger body parts.
With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes.
The carbon fieber parts are CNC precision cut from light and strong plates.

This combo includes aluminum (SPX92007) and carbon fiber (SPX93017) main frame stiffener kits, as shown in first photo. Both kits can be purchased seperately.

Spedix Aluminum Main Frame Stiffener for Logo 500 / 600 / 600SE

This aluminum stiffener can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash.
Metal pieces reinforce connections between landing skids and the main frame by transfering impact to stornger body parts.
Made of strong and light avaiation aluminum alloy.

Contains:

• 4 x alluminum stiffeners (2 front, 2 back)
• 8 x hex screws
• 4 x washers

An industry first – Lynx Heli Innovations high performance NITRO fan replacement.

Increases air flow for better engine cooling with maximum efficiency to reduce engine load compared to a standard fan. High tolerance dimensions for solid and concentric installation to eliminate all vibrations. Has a turbo effect and special rudder blade to optimize air flow.

Designed to replace the Synergy 700 Nitro Series and Mikado G LOGO 690 standard fan and immediately improve the performance of your Heli.

Material: Aluminum 7075-T6 Alloy

Neon red Carbon Fiber Tail Fin for Logo 550-600

Spedix Hardened Tail Rotor Shaft for Logo 550SX/600/600SE

Features

• Compatible with stock shaft.
• Smooth surface
• Excellent concentricity
• Made of high strength stainless steel

Integrated Tail Box for Mikado Logo 400,480,500 series

Tail Boom Holder for Logo 600 / 600SE
This tail boom holder can prevent the tail boom rip into the heli body and destroy the plastic main frames in a crash.
CNC precision cut from high strength, light weight aviation aluminum alloy.
 

Battery support LOGO 600/SE/SX/690SX

CNC Metal Pitch Arm set for logo 480/550

Includes:

• 2x 6061 pitch arm

CNC Metal Pitch Arm set for Logo 600

Includes:

• 2x 6061 pitch arm (Pre-installed)

Suitable for Logo ,ALIGN - TRX-600 Nitro & Electric

Alloy tail grip set complete with high strength stainless steel hub, pre-assembled with twin precision radial ballraces and thrust bearing in each grip for smooth movement and safety at high rpm..

Supplied complete with blade grip washers and plain shank mounting bolts. Designed to suit tail blades with a nominal 5mm root thickness.

Total weight including blade washers and bolts - 32.80 g

Canopy Rubbers Robbe( fit other models) 4pcs

Heavy Duty Autorotation Hub for Mikado Logo 500 to 690 SE/SX

this is an upgrade to standard hub, using stronger Japan made bearing .The hub itself is made from CNC 7075 aluminium, black anodized

This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

Specifications:

• Base length is 14mm
• Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
• Cut the Nylon Collars to require length.
• Canopy Rubber Grommet openings diameter 7.2~7.5mm

Includes:

• 2x Fast Mounting Canopy Mount
• 2x M3x20 Set Screw
• 2x M3x16 Set Screw
• 2x Rubber Grommet
• 2x 7x6MM Nylon Collar
• 2x 7x8MM Nylon Collar
• 2x 7x10MM Nylon Collar

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m2.5 is very strong for all today FBL helicopters.
Easy and fine adjustable for the length of linkage rods. Made From stainless steel

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment everytime and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustbale linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack includes 4 rods

Choice of

• M2.5x55mm
• M2.5x60mm
• M2.5x65mm
• M2.5x71mm

Direct replacement for Standard Logo 700 Pitch Rod Set.

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m3

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment everytime and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustbale linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, 46 or 64mm