Servo Parts

Metal Servo arm for heavy duty applications,  Airplanes, cars and Boats.- do not use on helicopters.

Use it where you need extreme reinforcement for your servo, eliminating any slope !

Set including 4 arms with hardware, 40mm length.

Apply for ALIGN DS415M/425M Servo.

DS415M/425M servo upper cover x 1

DS415M/425M servo lower cover x 1

Screw x 2

Align D4BF Servo Horn

Suitable for servos of ALIGN DS410 / DS420 / DS410M

DS4 Servo Horn x 3 pcs
DS4A Servo Horn x 1 pcs

This is a replacement Align Servo arm Set, and is intended for use with the Align DS150/155 T-REX 150 Servo.

Double Aluminium Servo horn for HDS 577 & 877 SERVOS. Anodised in Blue

Set including 1 arm

Aluminium CNC Double Arm Fits Hitec servos, 40mm long
Fits  Hitec servos

Pack including 1 double arm, with m2 holes

Aluminium CNC Single Arm Fits Hitec servos -Green, 25mm long
Fits  Hitec servos

Pack including 1 arm, with m2 holes

CNC servo Wheel/Round horn, 30mm
Fits  Futaba.

Pack including 1 round wheel arm - Not drilled

Description:

Includes:

• 2 x Singel Servo Support.
• 1 x Tail Servo Support.

Used For:

• Goblin Comet

 

Futaba - Savox 25T Servo Horn/ Aluminum Alloy Locking Reinforced Servo Arm

available in Black

Set inclusive 1pcs Arm Black

Futaba - Savox 25T Servo Horn/ Aluminum Alloy Locking Reinforced Servo Arm

available in Black

Set inclusive 1pcs Arm Black

Futaba - Savox 25T Servo Horn/ Aluminum Alloy Reinforced Servo Arm

Set including : 1 servo arm

Futaba - Savox 25T Servo Horn/ Aluminum Alloy Reinforced Servo Arm

available in Red/Black and Gold/Black

Set inclusive -1pcs (choose your color)

This is a replacement Align Upper and Lower Case Set, and is intended for use with the Align BL700H and 750H servos. 
(1) BL700H/750H servo upper cover
(1) BL700H/750H servo lower cover
(4) Screw

This is a replacement Align Servo Gear Set, and is intended for use with the Align BL750H Servo.

CNC Machined Alloy 35 mm Servo Wheel (HiTec fitting)

Heavy duty machined alloy 35mm diameter servo wheel provides positive flex free control and a high degree of structural security. All holes drilled and threaded to accept M2 fixings.

A total of 24 holes at 11mm, 12.5mm, 14mm & 15.5mm from centre allowing various offsets and spacings.

CNC servo Arms, avaliable for Hitec, JR, Futaba.Pack including 1 arm ( choose Arm options)

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS410 Servo. This package includes all five gears, so you can
replace the entire gear train in the servo

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS410 Servo. This package includes gears G1, G2 and G5

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS420 servo

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS420 Servo. This package includes gears G1, G2 and G5

Use for ALIGN DS525 Servo.

Specification:

• DS525 Metal gear G1x1
• DS525 Metal gear G2x1
• DS525 Metal gear G3x1
• DS525 Metal gear G4x1
• DS525 Metal gear G5x1

 

Apply for ALIGN DS615/655 Servo

Specification:

 

• DS615/655 servo upper cover x 1
• DS615/655 servo lower cover x 1
• Screw x 4
• O-Ring x 4

 

 

Apply for ALIGN DS655 Servo

Specification:

• DS655 gear G1x1
• DS655 gear G2x1
• DS655 gear G3x1
• DS655 gear G4x1

GT Power CCPM Servo Consistency Master is a very handy servo driver/tester that can test the consistency and set the centering for up to 3 servos simultaneously.

This is great for anyone who is setting up RC airplane, car, or CCPM 3D helicopter and would like to see if their servos are actually working or compare the response time of each servo before installing them in your model. Additionally, you can set your servo into neutral/center mode without having a Transmitter/Receiver.

There are 3 available test modes: Manual Mode, Neutral Mode, Automatic "window wiper" Mode

You can also connect 1-3 ESC to test and compare their reaction time respectivel

The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver

Gear Set For Futaba Servo S9201/9202/9304

Gearset Savox 1256 , TITANIUM gear, with bearing

Gearset Savox 1257 , METAL gear, with bearing

Gearset Savox 1257 , TITANIUM gear, with bearing

Gearset Savox 1258 , TITANIUM gear, with bearing

Gearset Savox 1290 with bearing

Machined from high grade light alloy and anodised in various colours.

All holes drilled and threaded to accept M2 fixings.

Servo set , Use for JR Servo

KST original metal servo arm 25T standard servo rocker arm, suitable for a variety of 25T servos.

Main output gear teeth: 25T.

M3 thread holes.

Suitable for KST515MG, 725MG, 525MG, 815MG, 805X... Futaba, Savox, graupner... standard servos.

included: 1 arm, black color.

KST original metal servo arm 25T standard servo rocker arm, suitable for a variety of 25T servos (single rudder arm, excluding screws and other accessories)

Main output gear teeth: 25T Main output gear outer diameter: 6MM

Suitable for KST standard size - such as 515MG, 725MG, 525MG, 815MG, 805X, Futaba , Savox, and other 25T spline standard servos

Fully Adjustable to the neutral point, double fixation, plastic structure in the middle, protects the gear of the servo.