Avizar motors

Avizar MC4014 Brushless MultiRotor Motor 330kv, Specially made for Monster quads, for 6S setups.

Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference just by turning them, and hear the difference on the run!  

This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters from 700cm and up, due its features.

So what is so special in this motor:

1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

2- Heat, 25% lower heat generation thanks to ceramic bearings.

3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

Features:

• Sealed Japanese Ceramic Hybrid bearings
• Short, hardened Japanese steel shaft
• 0.2mm NdFeB stator plates
• Includes 6mm, prop adapter, and mounting plate
• Oversized motor wires 3.3mm, silicone, for long and safe mounting.

Specifications:

•   Model: MC4014-330KV
•   Config: 18N24P
•   Motor size: 44.8L x 34.5 mm
•   Weight: 149g
•   KV(rpm/v): 330
•   Max Power Continuous: 750W
•   Max Current: 25A
•   Max Efficiency Current: 3 - 10A >84%
•   Battery: 4 - 8s LiPo, optimal for 6S
•   Prop: 13"- 18"
•   Internal resistance :85mohm

Included:

• Motor with 60cm wires x1
• Prop adaptor for normal prop with 8mm shaft x1
• Prop adaptor for Flat props x 1
• Prop adaptor Screws.

Avizar MC4114 Brushless MultiRotor Motor 350kv, Specially made for Monster quads, for 6S setups.

Very high quality super smooth running motors, designed specifically for multi-rotor use. You can feel the difference just by turning them, and hear the difference on the run!  

This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters FRAMES from 800Mm and up, due its features.

So what is so special in this motor:

1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

2- Heat, 25% lower heat generation thanks to ceramic bearings.

3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

Features:

• Sealed Japanese Ceramic Hybrid bearings
• Short, hardened Japanese steel shaft
• 0.2mm NdFeB stator plates

Specifications:

•   Model: MC4114-350KV
•   Config: 24N22P
•   Motor size: 46 x 39 mm
•   Weight: 149g
•   KV(rpm/v): 350
•   Max Power Continuous: 350
•   Max Current: 25A
•   Battery: 4 - 8s LiPo, optimal for 6S
•   Prop: 13"- 18"
•   Internal resistance :0.195 ohms

Included:

• Motor
  
• Prop adaptor for Flat props x 1
• Prop adaptor Screws.

Multirotors are used in many projects. because of High demands, longer flying times, heaver loads and Extreme climate conditions, there is a growing demand for Higher quality motors.
Delivering best demands, designed for Water proof and dust resistance, X3 motors give you more value.

X3 motor delivered in Black coating Matt finish, it fits 35mm motor mounts.
Delivered with original Japanese bearings, Dynamically balanced for Zero vibrations.

Fits 4-8S lipos, tested with props 12-14"( see table below)

Delivered with Standard shaft adapter for Conventional props and Flat adapter for Flat props.

Specifications:
 

• KV :470
• Config: 12N14P
• Shaft Diameter: 4mm
• Motor Dimension :34.8х34.2
• Weight : 120g
• Current Idle :0.5A
• No.of Cells: 4-8S Lipo
• Continuous current(A) 180S :25A max
• Continuous Power(W)180S :450W max
• Max. efficiency current: (6-15A)>85%
• Internal resistance :170mΩ

MC3525-950KV is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms THIS Motor is a tuning V2 version for the older motor 3525-930kv

Fits Spyder Little, F550, and many others.

As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

So what is so special in this motor:

- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

- Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

Specifications:

•   No-load speed: 950 KV
•   Load current: 22 Amps
•   Max Watts : 325
•   No load current: 0.8 Amps
•   Japan NMB bearings
•   Weight: 60gr
•   Motor Diameter :35 mm
•   Recommended Battery: 4-6 S
•   Propellers to use: from 9-11"

Included:

•   MC3525 motor
•   Propeller mount with screws, Nut and Cup.

Sample testing data is below.