Crown Gear

Crown Gear
Best Pinions you ever seen, They are machined from a special steel alloy and hardened for ultimate strength and durability. All produced in Europe, under most hardest standards, those Pinions are the best value for money you can have.

Products


  • Extra-Hard Clutch Bell 15T

    Extra-Hard Clutch Bell 15T

    Extra Hard 15 Tooth Clutch Bell for the Traxxas Revo, and 3.3 Revo. This clutch bell attaches to the engine crankshaft, makes contact with the clutch shoes and meshes with the main gear to power the vehicle.

    included:

    Extra Hard 15 Tooth Clutch Bell for the Traxxas.
    Two Bearing 5mm x 10mm
    SKU: TRXREVO15T
    €14.50
    inc. VAT

     IN STOCK
  • Extra-Hard Clutch Bell 16T

    Extra-Hard Clutch Bell 16T

    Extra Hard 16 Tooth Clutch Bell for the Traxxas Revo, and 3.3 Revo. This clutch bell attaches to the engine crankshaft, makes contact with the clutch shoes and meshes with the main gear to power the vehicle.

    included:

    Extra Hard 16 Tooth Clutch Bell for the Traxxas.
    Two Bearing 5mm x 10mm
    SKU: TRXREVO16T
    €14.50
    inc. VAT

     IN STOCK
  • Extra-Hard Clutch Bell 18T

    Extra-Hard Clutch Bell 18T

    Extra Hard 18 Tooth Clutch Bell for the Traxxas Revo, T-Maxx

    included:

    Extra Hard 18 Tooth Clutch Bell for the Traxxas.
    Two Bearing 5mm x 10mm
    SKU: TRXJATO18T
    €14.50
    inc. VAT

     IN STOCK
  • Extra-Hard Clutch Bell 20T

    Extra-Hard Clutch Bell 20T

    Extra Hard 20 Tooth Clutch Bell for the Traxxas Revo, T-Maxx

    included:

    Extra Hard 20 Tooth Clutch Bell for the Traxxas.
    Two Bearing 5mm x 10mm
    SKU: TRXJATO20T
    €14.50
    inc. VAT

     LOW STOCK
  • Extra-Hard Clutch Bell 22T

    Extra-Hard Clutch Bell 22T

    Extra Hard 22 Tooth Clutch Bell for the Traxxas Revo, T-Maxx

    included:

    Extra Hard 22 Tooth Clutch Bell for the Traxxas.
    Two Bearing 5mm x 10mm
    SKU: TRXJATO22T
    €14.50
    inc. VAT

     IN STOCK
  • Gear/Pinion 12T M1, Ø8mm

    Gear/Pinion 12T M1, Ø8mm

    Not all Pinions are Created Equal !

    Crown Gear Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Cown Gear Pinions are produced in Europe.

    Details: Pinion Modul 1, Diameter of 8mm. 12T

    SKU: CROWN12M18mm
    €9.00
    inc. VAT

     IN STOCK
  • Gear/Pinion M1, 13T Ø5mm

    Gear/Pinion M1, 13T Ø5mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR Pinions produced in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 5mm. 13T

    SKU: CROWN1305M1
    €9.00
    inc. VAT

     IN STOCK
  • Gear/Pinion M1, 8T Ø5mm

    Gear/Pinion M1, 8T Ø5mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR Pinions produced in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 5mm. 8T

    SKU: CROWN805M1
    €9.00
    inc. VAT

     IN STOCK
  • Hardened Pinion M0.7, 10T, Shaft 6mm

    Hardened Pinion M0.7, 10T, Shaft 6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 0.7, To fit Shaft Diameter of 6mm. 10T

    SKU: CROWN10M076MM
    €9.00
    inc. VAT

     IN STOCK
  • Hardened Pinion M0.7, 11T, Shaft 6mm

    Hardened Pinion M0.7, 11T, Shaft 6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 0.7, To fit Shaft Diameter of 6mm. 11T

    SKU: CROWN11M076MM
    €9.00
    inc. VAT

     IN STOCK
  • Hardened Pinion M0.7, 12T, Shaft 6mm

    Hardened Pinion M0.7, 12T, Shaft 6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 0.7, To fit Shaft Diameter of 6mm. 12T

    SKU: CROWN12M076MM
    €9.00
    inc. VAT

     IN STOCK
  • Hardened Pinion M0.7, 13T, Shaft 6mm

    Hardened Pinion M0.7, 13T, Shaft 6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 0.7, To fit Shaft Diameter of 6mm. 13T

    SKU: CROWN13M076MM
    €9.00
    inc. VAT

     IN STOCK
  • Hardened Pinion M0.7, 14T, Shaft 6mm

    Hardened Pinion M0.7, 14T, Shaft 6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 0.7, To fit Shaft Diameter of 6mm. 14T

    SKU: CROWN14M076MM
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 10-20T M0.7 5mm

    Pinion 10-20T M0.7 5mm

    Not all Pinions are Created Equal !
    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR pinions are produced in Europe

    Details: Pinion Modul 0.7, Diameter of 5 mm. 10T-20T( Choose Option)

    SKU: CROWN1005M071
    €7.00
    inc. VAT

     IN STOCK
  • Pinion 10T, M1, Ø6mm

    Pinion 10T, M1, Ø6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown gear products are made in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 6mm. 10T

    SKU: CROWN10m16mm
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 11T, M1, Ø6mm

    Pinion 11T, M1, Ø6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR pinions are produced in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 6mm. 11T

    SKU: CROWN11m16mm
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 12-20T, M0.5 5mm

    Pinion 12-20T, M0.5 5mm

    Not all Pinions are Created Equal !

    Crown Gear Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Crown Gear Pinions are produced in Europe!

    Details: Pinion Modul 0.5 , Diameter of 5 MM.
    Choice of T : 12-20

    SKU: CROWN0.515205mm1
    €5.00
    inc. VAT

     IN STOCK
  • Pinion 12T ,M0.6 5mm

    Pinion 12T ,M0.6 5mm

    CROWN GEAR 12T . Hardened pinion, fit shaft of 5mm, Modulus 0.6, fit Trex 500, 3DX500, LEPTON and others.


    CROWN GEARE pinions are made in Europe

     

    SKU: CROWN06.12T
    €6.00
    inc. VAT

     IN STOCK
  • Pinion 12T, M1, Ø6mm

    Pinion 12T, M1, Ø6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR products are produced in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 6mm. 12T

    SKU: CROWN12m16mm
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 13T ,M0.6 5mm

    Pinion 13T ,M0.6 5mm

    CROWN GEAR 13T . Hardened pinion, fit shaft of 5mm, Modulus 0.6, fit Trex 500, 3DX500, LEPTON and others.


    CROWN GEARE pinions are made in Europe

     

    SKU: CROWN06.13T
    €6.00
    inc. VAT

     IN STOCK
  • Pinion 13T M1, Ø8mm

    Pinion 13T M1, Ø8mm

    Not all Pinions are Created Equal !

    Crown Gear Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    Cown Gear Pinions are produced in Europe.

    Details: Pinion Modul 1, Diameter of 8mm. 13T

    SKU: CROWN13M18mm
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 13T, M1, Ø6mm

    Pinion 13T, M1, Ø6mm

    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR pinions are produced in Europe

    Details: Pinion Modul 1, To fit Shaft Diameter of 6mm. 13T

    SKU: CROWN13m16mm
    €9.00
    inc. VAT

     IN STOCK
  • Pinion 14 m0.7 6MM

    Pinion 14 m0.7 6MM

    Not all Pinions are Created Equal !
    CROWN GEAR Pinions are the last pinion gears you will ever need. They are machined from a special steel alloy and hardened for ultimate strength and durability. We maintain extremely tight tolerances so the pitch of the gear is precise. The means our gears run very quietly and efficiently.

    CROWN GEAR pinions are made in Europe

    Details:14T Pinion Modul 0.7 , Diameter of 6 MM.
     

    SKU: CROWN14M0.7
    €8.00
    inc. VAT

     IN STOCK
  • Pinion 14T M0.6 5mm

    Pinion 14T M0.6 5mm

    CROWN GEAR Hardened pinions, fit shaft of 5mm,14T , Modulus 0.6, fit Trex 500 and others.

    CROWN GEARE pinions are made in Europe

    SKU: CROWN0614T
    €6.00
    inc. VAT

     IN STOCK

Manufacturers