RaGG-e

RaGG-e

RaGG-e Frame is a proud supporter of UK engineering and all RaGG-e frames are Design & Engineered In the South of the UK.

Products


  • Gravity 250 FPV Racing unbreakable Frame - Blue (for 2200 series motors)

    Gravity 250 FPV Racing unbreakable Frame - Blue (for 2200 series motors)

    The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included

    The Gravity 250-22 is a frame based on the original Gravity 250. This frame will accommodate the larger 2200 series motors.
     
    Main Features:

    •     FPV camera protection
    •     Motor protection
    •     Accessible VTX dip switches from window in Top Cover
    •     Lipo balance lead socket
    •     Battery strap slots
    •     Rubber battery grip pad included
    •     Motor ventilation holes
    •     LED rear bumper for 8 programmable LED’s
    •     Naze 32 LED indicator window
    •     Naze 32 pre-drilled mounting holes
    •     CC3D PDB pre-drilled holes
    •     Large airflow slots in motor arms
    •     Machined channels in arms for motor wires
    •     Pre-drilled Top Cover
    •     Central COG with 3S 1.3ah lipo battery
    •     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    •     Material                              HDPE
    •     Weight                               152g
    •     Size                                    250mm PCD
    •     Flight Controller                 Naze32
    •     Motor Size                         1806 series
    •     Maximum battery size        3S 1.3ah

     
    * The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

    SKU: GRAVITY250-22-BLU
    €109.00
    inc. VAT

     LOW STOCK
  • Gravity 250 FPV Racing Unbreakable Frame - White (for 2200 series motors)

    Gravity 250 FPV Racing Unbreakable Frame - White (for 2200 series motors)

    The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included

    The Gravity 250-22 is a frame based on the original Gravity 250. This frame will accommodate the larger 2200 series motors.
     
    Main Features:

    •     FPV camera protection
    •     Motor protection
    •     Accessible VTX dip switches from window in Top Cover
    •     Lipo balance lead socket
    •     Battery strap slots
    •     Rubber battery grip pad included
    •     Motor ventilation holes
    •     LED rear bumper for 8 programmable LED’s
    •     Naze 32 LED indicator window
    •     Naze 32 pre-drilled mounting holes
    •     CC3D PDB pre-drilled holes
    •     Large airflow slots in motor arms
    •     Machined channels in arms for motor wires
    •     Pre-drilled Top Cover
    •     Central COG with 3S 1.3ah lipo battery
    •     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    •     Material                              HDPE
    •     Weight                               152g
    •     Size                                    250mm PCD
    •     Flight Controller                Naze32/CC3D
    •     Motor Size                         1806 series-2204
    •     Maximum battery size       3S 1.3ah

     
    * The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s

    SKU: GRAVITY250-22-WHT
    €109.00
    inc. VAT

  • Gravity 250 FPV Racing Unbreakable Frame- Yellow (for 2200 series motors)

    Gravity 250 FPV Racing Unbreakable Frame- Yellow (for 2200 series motors)

    The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included

    The Gravity 250-22 is a frame based on the original Gravity 250. This frame will accommodate the larger 2200 series motors.
     
    Main Features:

    • FPV camera protection
    • Motor protection
    • Accessible VTX dip switches from window in Top Cover
    • Lipo balance lead socket
    • Battery strap slots
    • Rubber battery grip pad included
    • Motor ventilation holes
    • LED rear bumper for 8 programmable LED’s
    • Naze 32 LED indicator window
    • Naze 32 pre-drilled mounting holes
    • CC3D PDB pre-drilled holes
    • Large airflow slots in motor arms
    • Machined channels in arms for motor wires
    • Pre-drilled Top Cover
    • Central COG with 3S 1.3ah lipo battery
    • The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    • Material                              HDPE
    • Weight                               152g
    • Size                                    250mm PCD
    • Flight Controller                 Naze32
    • Motor Size                         1806 series
    • Maximum battery size        3S 1.3ah

     
    The Lifetime Frame Warranty* covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s

    SKU: GRAVITY250-22-YEL
    €109.00
    inc. VAT

     LOW STOCK
  • Gravity 280 FPV Racing unbreakable Frame - Blue

    Gravity 280 FPV Racing unbreakable Frame - Blue

    The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included
     
    Main Features:

    •     FPV camera protection
    •     Motor protection
    •     Accessible VTX dip switches from window in Top Cover
    •     Lipo balance lead socket
    •     Battery strap slots
    •     Rubber battery grip pad included
    •     Motor ventilation holes
    •     LED rear bumper for 8 programmable LED’s
    •     Naze 32 LED indicator window
    •     Naze 32 pre-drilled mounting holes
    •     CC3D PDB pre-drilled holes
    •     Large airflow slots in motor arms
    •     Machined channels in arms for motor wires
    •     Pre-drilled Top Cover
    •     Central COG with 4s 1800mah lipo battery
    •     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    •     Material                             HDPE
    •     Weight                               175g
    •     Size                                    280mm PCD
    •     Flight Controller                Naze32/CC3D
    •     Motor Size                         2200 series
    •     Maximum battery size       4s-1800mah

     
    * The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

    SKU: GRAVITY280-BLU
    €119.00
    inc. VAT

     LOW STOCK
  • Gravity 280 FPV Racing unbreakable Frame - White

    Gravity 280 FPV Racing unbreakable Frame - White

    The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included
     
    Main Features:

    •     FPV camera protection
    •     Motor protection
    •     Accessible VTX dip switches from window in Top Cover
    •     Lipo balance lead socket
    •     Battery strap slots
    •     Rubber battery grip pad included
    •     Motor ventilation holes
    •     LED rear bumper for 8 programmable LED’s
    •     Naze 32 LED indicator window
    •     Naze 32 pre-drilled mounting holes
    •     CC3D PDB pre-drilled holes
    •     Large airflow slots in motor arms
    •     Machined channels in arms for motor wires
    •     Central COG with 4S 1800Mah lipo battery
    •     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    •     Material                             HDPE
    •     Weight                               175g
    •     Size                                    280mm PCD
    •     Flight Controller                Naze32/cc3d
    •     Motor Size                         220x series
    •     Maximum battery size       4s 1800mah

     
    * The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

    SKU: GRAVITY280-WHT
    €119.00
    inc. VAT

     LOW STOCK
  • Gravity 280 FPV Racing Unbreakable Frame - Yellow

    Gravity 280 FPV Racing Unbreakable Frame - Yellow

    The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
    The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included
     
    Main Features:

    •     FPV camera protection
    •     Motor protection
    •     Accessible VTX dip switches from window in Top Cover
    •     Lipo balance lead socket
    •     Battery strap slots
    •     Rubber battery grip pad included
    •     Motor ventilation holes
    •     LED rear bumper for 8 programmable LED’s
    •     Naze 32 LED indicator window
    •     Naze 32 pre-drilled mounting holes
    •     CC3D PDB pre-drilled holes
    •     Large airflow slots in motor arms
    •     Machined channels in arms for motor wires
    •     Pre-drilled Top Cover
    •     Central COG with 4S 1800MAh lipo battery
    •     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

    Specifications:

    •     Material                             HDPE
    •     Weight                               175g
    •     Size                                    280mm PCD
    •     Flight Controller                Naze32/cc3d
    •     Motor Size                         220X series
    •     Maximum battery size       4S 1800Mah

     
    * The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

    SKU: GRAVITY280-YEL
    €119.00
    inc. VAT

     LOW STOCK
  • RaGG-e 200H Racing Frame Black/White/Black

    RaGG-e 200H Racing Frame Black/White/Black

    RaGG-e 200H Racing Frame Black/White/Black

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller

     
     

    SKU: RAG-200H-BWB
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-e 200H Racing Frame Blue/Yellow/Blue

    RaGG-e 200H Racing Frame Blue/Yellow/Blue

    RaGG-e 200H Racing Frame Blue/Yellow/Blue

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller

     
     

    SKU: RAG-200H-BYB
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-e 200H Racing Frame Purple/Yellow/Purple

    RaGG-e 200H Racing Frame Purple/Yellow/Purple

    RaGG-e 200H Racing Frame Purple/Yellow/Purple

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller

     
     

    SKU: RAG-200H-PYP
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-e 200H Racing Frame Red/Yellow/Red

    RaGG-e 200H Racing Frame Red/Yellow/Red

    RaGG-e 200H Racing Frame Red/Yellow/Red

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller

     
     

    SKU: RAG-200H-RYR
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-e 200H Racing Frame White/Black/White

    RaGG-e 200H Racing Frame White/Black/White

    RaGG-e 200H Racing Frame White/Black/White

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    Materials: 12.7 HDPE

    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller
    SKU: RAG-200H-WBW
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-e 200H Racing Frame Yellow/Purple/Yellow

    RaGG-e 200H Racing Frame Yellow/Purple/Yellow

    RaGG-e 200H Racing Frame Yellow/Purple/Yellow

    The RaGG-e 200h is a 200mm HDPE frame designed for 4" props and up to 22 size motors.
    The 200h offers Durability and unparalleled Strength to give any level pilot the confidence in flight, with the knowledge that there will be no more arm changes.
    It protects the vital components in an enclosed shell, without restricting the component selection. Along with the 3d printed Cam mounts and Carbon Fibre Top Plates this frame will grow with your ability in flying.

    Specifications:

    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size: 200mm diagonally, 155mm wide
    • Maximum Propeller: 4"
    • Motor Mount Screw Size: M3 x 6mm
    • Flight Controller Mount: Kiss, NAze F3 or CC3D Weight 130g

    Recommended Parts:

    • 1500 4s Battery
    • 2204/5/6 motors
    • 20a or more ESC
    • Any 36mm flight controller

     
     

    SKU: RAG-200H-YPY
    €64.90
    inc. VAT

     72HR STOCK
  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Black-White-Black

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Black-White-Black

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Black-White-Black,

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-BWB
    €74.00
    inc. VAT

  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-BYB
    €74.00
    inc. VAT

     LOW STOCK
  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Purple-Yellow-Purple

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Purple-Yellow-Purple

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Purple-Yellow-Purple

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-PYP
    €74.00
    inc. VAT

  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Red Yellow Red

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Red Yellow Red

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Red Yellow Red

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-RYR
    €74.00
    inc. VAT

     LOW STOCK
  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame White-Black-White

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame White-Black-White

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame White-Black-White

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-WBW
    €74.00
    inc. VAT

     72HR STOCK
  • RaGG-e WBX 5 Racing Frame Carbon Top Plates 2mm 4K

    RaGG-e WBX 5 Racing Frame Carbon Top Plates 2mm 4K

    RaGG-e WBX 5 Racing Frame Carbon Top Plates 2mm 4K

    This is a RaGG-e alternative bottom and top plates, using lighter material Carbon fibre to reduce the total weight of the frame.
    This manage to drop the weight down to around 106-110g.

    SKU: WBXCBNPlates
    €17.90
    inc. VAT

     IN STOCK
  • RaGG-e WBX Carbon Top Plate Standoff/Screw Pack GREEN

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack GREEN

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack GREEN

    Anodized stand-offs and screws for the optional WBX carbon top plate.

    SKU: WBXCBNStndPackGRN
    €6.90
    inc. VAT

     LOW STOCK
  • RaGG-e WBX Carbon Top Plate Standoff/Screw Pack LIGHT-BLUE

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack LIGHT-BLUE

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack LIGHT-BLUE

    Anodized stand-offs and screws for the optional WBX carbon top plate.

    SKU: WBXCBNStndPackLBL
    €6.90
    inc. VAT

     LOW STOCK
  • RaGG-e WBX Carbon Top Plate Standoff/Screw Pack PURPLE

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack PURPLE

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack PURPLE

    Anodized stand-offs and screws for the optional WBX carbon top plate.

    SKU: WBXCBNStndPackPURP
    €6.90
    inc. VAT

     LOW STOCK
  • RaGG-e WBX Carbon Top Plate Standoff/Screw Pack RED

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack RED

    RaGG-e WBX Carbon Top Plate Standoff/Screw Pack RED

    Anodized stand-offs and screws for the optional WBX carbon top plate.

    SKU: WBXCBNStndPackRED
    €6.90
    inc. VAT

     IN STOCK
  • RaGG-E WBX5 Quadcopter Racing FPV Airframe Black/White/Black

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Black/White/Black

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Black/White/Black

    Produced by UK company offering state of the art, high quality racing frames. Expertly milled from ultra-tough HDPE, with unique design features that not only catch the eye, but function to reduce overall weight & increase air flow. These units are able to accommodate a multitude of commonly used components, giving you the freedom to build a serious contender for both the racing and freestyle scenes.

    The RaGG-e WBX5 is a 205mm True X-Frame made of HDPE plastic offers the builder various options of component layout, the HDPE offers protection of vital electronic Components. This Durable frame will not let you down when it matters. And with the new colour scheme, Carbon Fibre Plates and 3D printed accossories this frame can be customised and refined down in weight to around the 100g mark making it a real contender in the race and freestyle scene.

    This frame is designed for 5" props and upto 22 size motors

    • RaGG-e WBX5 FPV Quadcopter Frame Specifications
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:205mm diagonally, 145mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Kiss, Naze or CC3D

    Specs

    • Main Frame.......................................82g
    • Top Plate............................................17g
    • Cam Gaurds.......................................12g
    • Spacer Module.....................................8g
    • Bottom Plate......................................15g
    • 12No. Screws.....................................10g
    • 35mm Standoffs...................................5g
    • 25mm Standoffs...................................3g
    • Total Weight....................................152g
    SKU: WBX5-BWB
    €65.00
    inc. VAT

  • RaGG-E WBX5 Quadcopter Racing FPV Airframe Blue/Yellow/Blue

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Blue/Yellow/Blue

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Blue/Yellow/Blue

    Produced by UK company offering state of the art, high quality racing frames. Expertly milled from ultra-tough HDPE, with unique design features that not only catch the eye, but function to reduce overall weight & increase air flow. These units are able to accommodate a multitude of commonly used components, giving you the freedom to build a serious contender for both the racing and freestyle scenes.

    The RaGG-e WBX5 is a 205mm True X-Frame made of HDPE plastic offers the builder various options of component layout, the HDPE offers protection of vital electronic Components. This Durable frame will not let you down when it matters. And with the new colour scheme, Carbon Fibre Plates and 3D printed accossories this frame can be customised and refined down in weight to around the 100g mark making it a real contender in the race and freestyle scene.

    This frame is designed for 5" props and upto 22 size motors

    • RaGG-e WBX5 FPV Quadcopter Frame Specifications
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:205mm diagonally, 145mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Kiss, Naze or CC3D

    Specs

    • Main Frame.......................................82g
    • Top Plate............................................17g
    • Cam Gaurds.......................................12g
    • Spacer Module.....................................8g
    • Bottom Plate......................................15g
    • 12No. Screws.....................................10g
    • 35mm Standoffs...................................5g
    • 25mm Standoffs...................................3g
    • Total Weight....................................152g
    SKU: WBX5-BYB
    €65.00
    inc. VAT

     LOW STOCK

Manufacturers