Mikado Logo 700 2016 model
LYNX Two-way fine adjustable Turnbuckle Pitch Rod Set M3 46/64mm set of 2
Direct replacement for Standard Logo 700 Pitch Rod Set. Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m3 Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds. Pack include 2 RODS, option of: 46 or 64mm |
€8.50
Inc. VATMain Blade Holder With Ball Bearings For Mikado Logo 700 #5048
Main Blade Holder With Ball Bearings For Mikado Logo 700 |
€34.50
Inc. VATMikado Anti-Static Cable for Logo 700
Your new LOGO 700 is equipped with a belt drive between main rotor and tail gearbox. Since any belt drive acts as a ribbon generator, it is possible that static discharges occur. Although the R/C electronics are usually positioned at a large enough distance from the assembly, it can still happen that static discharges affect the more sensitive electronics like receiver or flybarless system. This may happen only randomly, ambient temperature and humidity may be catalysts. For that reason, we offer this anti static wire kit, which connects the tail gearbox mounting block with the motor mount. |
€5.90
Inc. VATMikado Blader holder arm set LOGO 700/800 #05049
Mikado Blader holder arm set LOGO 700/800 #05049 |
€23.90
Inc. VATMikado Bolts for counterbearing plate, LOGO 700
Mikado Bolts for counterbearing plate, LOGO 700 |
€6.90
Inc. VATMikado Distance bushing bevel/teeth gear, LOGO 700
Mikado Distance bushing bevel/teeth gear, LOGO 700 |
€8.90
Inc. VATMikado Distance washer blade holder, LOGO 700
Mikado Distance washer blade holder, LOGO 700 |
€11.90
Inc. VATMikado Holder for torque tube, with ball bearing, LOGO 700
Mikado Holder for torque tube, with ball bearing, LOGO 700 |
€20.50
Inc. VATMikado Horizontal fin with clamps, LOGO 700
Mikado Horizontal fin with clamps, LOGO 700 |
€18.50
Inc. VATMikado Maingear 136 teeth, modul 1 LOGO 700
Mikado Maingear 136 teeth, modul 1 LOGO 700 |
€18.90
Inc. VATMikado Motor counterbearing plate, LOGO 700
Mikado Motor counterbearing plate, LOGO 700 |
€22.90
Inc. VATMikado Mounting block for bevel/belt gear, LOGO 700
Mikado Mounting block for bevel/belt gear, LOGO 700 |
€14.50
Inc. VATMikado Servo mounting plates 10+11mm, LOGO 700
Mikado Servo mounting plates 10+11mm, LOGO 700 |
€16.90
Inc. VATMikado Swashplate guide/ canopy mounting, LOGO 700
Mikado Swashplate guide/ canopy mounting, LOGO 700 |
€15.50
Inc. VATMikado Tail boom distance spacer, LOGO 700
Mikado Tail boom distance spacer, LOGO 700 |
€12.90
Inc. VATMikado Tail rotor shaft with bevel gear, LOGO 700
Mikado Tail rotor shaft with bevel gear, LOGO 700 |
€13.50
Inc. VATMikado Upper main rotor shaft support, LOGO 700
Mikado Upper main rotor shaft support, LOGO 700 |