Field Use tools

Pump-action spray to reduce static electricity. which causes glitches, shocks, sparking etc.
Reduce the risk of loosing your heli.

Quantity 50ml

BEASTX Bevel Box and Mounting Frame Set

360° Inclinometer "Bevel Box"

Digital Bevel Box solves the problem just put on the magnetically adhering device and is immediately displayed the exact horizontal angle.
So you can precisely align your tools, rows are marked out accurately.

Measuring range =b1180 degrees, Accuracy =b10,1 degrees
Resolution 0,1 degrees
Waterproof housing (IP 54)
Magnetic Case
Dimensions (W x H x D): 50 x 50 x 32 mm
Operating with 1x Button Cell CR 2032 (in content)

Mounting Frame for Bevel Box (BXA76005)

To adjust the pitch values, simply pull the mounting frame on to the rotorblade.
use for T-Rex 450 up to T-Rex 700

Technical Data:
Material: Carbon, black
Thickness: 2,5mm

Mounting Frame is pre-assembled
You just have to put the Digital Bevel Box into the Carbon Frame and go on !

Content:
scews and acessories
Inclinometer Bevel Box
Bag
Li-Button cell /CR2032

This "economy" spanner set includes just about all the sizes you will ever need on a model heli.
Ideal for you field box and building bench.

Sizes included are : 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm.
Set of 10 spanners

Digital Anemometer with wind temperature measurement instrument

Air speed mesurement with a fan sensor

• Digital display: LCD, 30x26mm, with behind reason lighting (approx. 15s)
• Measuring ranges: 0-30m / s, 0-90km / h,-10-45°C
• Dissolution: 0.1 ms / s, 0.3 kms / h 0.2°C
• Unities: m/s, ft/min, knots, km/h, mph, °C or °F
• Exactness: wind: ±5%, temperature: ±2°C
• Automatic turning off after approx. 15 minutes
• Minimum / maximum air speed measurement
• Average measurement of the air speed
• Undervoltage alarm

Technical data

• Product: HP-866B
• Electricity supply: 2x1,5V AAA
• Power consumption: approx. 3 mA, switched off 5 µ A
• Working data:-10-40°C, relative air dampness =90%rH

Etronix 150A Watt Meter & Power Analyser

Helps to prevent peak currents damaging battery, ESC's, motor, wiring and connectors.
Set cut off voltages, check battery capacity & health.
Confirm proper battery charger operation.
Measure receiver and servo current to determine if a UBEC is needed.

Specifications:

• Operates from 4.8-6.0v
• OV with potential auxiliary battery
• Measures 0-150A resolution 0.01A, 0-60V resolution 0.01V, 0-6554W resolution 0.1W, 0-65Ah resolution 0.001Wh, 0-6554Wh resolution 0.1Wh
• 16x2 backlit LCD display
• Dimensions: 85x42x25mm
• Weight: 82g

Fastrax 19-in-1 Tool Bag Set 3x slot, 3x Phillips, 6x Hex, 4x Nut and 1x 5/8mm Wrench.

If you are after an all encompassing tool set for your r/c vehicle then Fastrax has introduced the perfect cost effective solution with their new 19-in-1 Tool bag.
This set contains everything you need to wrench on your vehicle with a wide range of metric nut drivers, hex drivers and slotted and Phillips head drivers to cover all hardware.
The solid rubber handle features a tightening and loosing ratcheting one-way chuck that also clamps your chosen driver.
All housed in a convenient zipped canvas-carrying case.

Tools Included:

• Hex Drivers: 1.5, 2, 2.5, 3, 3.5, 4mm
• Nut Drivers: 4.0, 5.0, 5.5, 7.0, 8.0mm
• Phillips Head: 00, 0, 1 size
• Flat Head: 2.0, 3.0, 4.0 size
• Spanner: 5mm and 8mm
• Ratcheting Rubber Handle

Fastrax Aluminium Metered Glow Starter with 1800mAh Battery

With this anodised aluminium metered glow starter you can easily tell if the glow starter is drawing any current when attached to the glow plug.
If the meter doesn't move, you will instantly know that either the glow plug is bad or the battery is low.

Fastrax Glow Clip With Plug Driver For 12V

Very handy tool, for Large gasoline engines

Glowplug connector with flexible cable and alligator clips. Extra long claw connector version for RC HELICOPTERS, and cars with combustion engines.
Long-reach 82MM clip, good for RC HELICOPTERS, cars with extreme heat-sink heads
Designed to fit any standard glow plug, this chrome-plated plug socket locks in place with just a press without pushing or twisting

HSS bit Screwdriver set Hex , this set made from Hardened steel

The beautiful CNC handles are knurled and color anodized, and they come with one set of ultra-hardened HSS precision type hex bits.
Handles feel great in your hand, perfect size.
GREAT value on great tools!
Sizes 1.5-2-2.5-3mm

Handle color might vary