Hand Tools

Hand Tools

Page of 3
3rd Hand assistant- Helping Hand with Magnifier

3rd Hand assistant- Helping Hand with Magnifier

Helping Hand with Magnifier

Component holder from nickel-plated steel with 2 flexible clip terminals, magnifier (2.5-times) and heavy screw feet.
Helping Hand with Magnifier Big Image

You will have a third hand, e.g. to clamp a board, while you do your work with the component.

  • 6 lockable hinges
  • Nickel-plated steel
  • Heavy screw feet
  • Magnifier with 2.5-times enlargement
  • 2 clip terminals

€11.00


€9.09 Ex VAT
Quantity
5 in 1 RC Hex Driver Screwdriver Tool Set interchangeable Bits

5 in 1 RC Hex Driver Screwdriver Tool Set interchangeable Bits

Super hard screwdriver head made by high alloy steel (HSS) ,wear and distortion resisting! Chrome vanadium steel, high hardness, durability.
Ergonomic Anodized CNC aluminum handle , inside place for components and screws!

4 Hex screwdrivers bits in set, with the following sizes.

1.5mm
2.0mm
2.5mm
3.0mm
Wrench Base Handle

€24.00


€19.83 Ex VAT
Quantity
7 in 1 RC Hex Driver Screwdriver Tool Set interchangeable Bits

7 in 1 RC Hex Driver Screwdriver Tool Set interchangeable Bits

Super hard screwdriver head made by high alloy steel (HSS) ,wear and distortion resisting! Chrome vanadium steel, high hardness, durability.
Ergonomic Anodized CNC aluminum handle , inside place for components and screws!

6 Hex screwdrivers bits in set, with the following sizes.

1.5mm
2.0mm
2.5mm
3.0mm
4.00mm
Phillips Bit
Hex Nut Driver 10mm

Wheel Wrench Base Handle

€23.00


€19.01 Ex VAT
Quantity
Align Ball Link Plier Steel treated #K10338A

Align Ball Link Plier Steel treated #K10338A

This is a set of Align Ball Link Pliers. These are for removing and installing ball links without damaging the balls or links. Manufactured from medium carbon steel material these pliers feature heat treated points for maximum hardness and Iron-Nickel Plated Surface to prevent rust. The curved tip allows easy access to hard to reach links. They also have a slot to grasp and hold the link rods while installing or adjusting the links.

€25.19


€20.82 Ex VAT
Quantity
Align Hexagon Screw Driver Set of 4 #hz024

Align Hexagon Screw Driver Set of 4 #hz024

Super hard screwdriver head made by HSS high alloy steel,wear and distortion resisting!

Purifier handle made by aluminum alloy CNC , inside can place components and screws!

Using on heli's M2 socket screw and M3 socket screw!
 

€23.90


€19.75 Ex VAT
Quantity
All around Scissors

All around Scissors

Curved tip specially designed to cut easily different materials, such as polycarbonate and more.

These can also be used for airplane canopies, helicopter windshields and other plastics.
Strong plastic handle for comfort and control.
Lazer made Stainless steel cutting blades

€4.00


€3.31 Ex VAT
CNC Professional RC Tool Multifunction socket bracket Screwdriver holder tray Display stand

CNC Professional RC Tool Multifunction socket bracket Screwdriver holder tray Display stand

Name:dISPLAY tool holder

Material: aluminum alloy

Color: Black

holes(22 mm) :4PCS

holes(18 mm) :12PCS

holes(14 mm) :12PCS

L:212 mm

W:52MM

Note: tools not included

Package List:

1pcs * tool holder

€22.00


€18.18 Ex VAT
Quantity
eMAX Talon Wrench For fpv RACER Series Motors (1pc)

eMAX Talon Wrench For fpv RACER Series Motors (1pc)

eMAX Talon Wrench For fpv RACER Series Motors Excellent looking and practical tool. (1 Toll RED color).

€5.80


€4.79 Ex VAT
Quantity
Engineer PZM-58 Screw Pliers Cover for Neji-saurus GT

Engineer PZM-58 Screw Pliers Cover for Neji-saurus GT

This is a nice addition to the PZ-58 pliers , Cover it , Protect it , Keep it for Longer Life.

See images for better understanding of this small cap,

Note- Plier is Not included with the cover.

€3.30


€2.73 Ex VAT
Quantity
Heat Insulation Silicone Mat with Screw Position for Soldering ,and repairs, Size: 45 x 30 cm

Heat Insulation Silicone Mat with Screw Position for Soldering ,and repairs, Size: 45 x 30 cm

Extremely flexible, even after folded it always returns to its original shape.
Dimensions 450 x 300 mm.
Make your soldering and repair work easy with this multi-functional mat.

  • ESD-Safe
  • Heat-resistant up to 500°C
  • Pliable, returns to its original shape
  • 3x Small storage boxes and 3x magnetic areas
  • Screw compartments and tool holders
  • Anti-skid and anti-glue

€17.00


€14.05 Ex VAT
Quantity
Hex fold out holder Mini PocketStar With 8 pcs additional tools

Hex fold out holder Mini PocketStar With 8 pcs additional tools

Hex fold out holder Mini PocketStar With 8 pcs additional tools.

Blade

  • Chrome-vanadium steel, through hardened, electro-plated.

Handle

  • Ergonomic, reinforced fibreglass housing, 55 mm long.
  • Application
  • Practical fold out holder for mini keys so they no longer get lost. Particularly suitable for use with the smallest screws, e.g. when tightening screws or for the accurate setting of sensors.

Extra

  • Robust casing with eject button for simple and easy key selection. Hanging loop with matching snap-hook.

Set:

  • HEX tools: 0,7 - 0,9 - 1,3 - 1,5 - 2,0
  • Screwdriver: 1.5 - 2.0
  • Philips: PH00

Made in Germany by: Wiha Quality Tools

€19.95


€16.49 Ex VAT
Quantity
HEX Nut Drivers Wrench Tool set 4.0mm 5.5mm 7.0mm 8.0mm

HEX Nut Drivers Wrench Tool set 4.0mm 5.5mm 7.0mm 8.0mm

Socket Screw Nut Drivers Wrench for RC Models 4.0mm 5.5mm 7.0mm 8.0mm

Hex Nut Driver Set , CNC with comfortable aluminium handle
You know those pesky nuts they hide on the inside of the frame or the ones on the back of the control arms?
Now you can have a nutdriver set that has a long reach to it and get to those places.

Includes: 
  • 1 x 4.0mm Hex key Socket Screw Driver Wrench 
  • 1 x 5.5mm Hex key Socket Screw Driver Wrench 
  • 1 x 7.0mm Hex key Socket Screw Driver Wrench 
  • 1 x 8.0mm Hex key Socket Screw Driver Wrench

All this at an insanely great price. High quality and an outstanding value

€22.00


€18.18 Ex VAT
Quantity
Hex Screwdriver Replacement HSS Bit Long version 0.9/1.3/1.5mm

Hex Screwdriver Replacement HSS Bit Long version 0.9/1.3/1.5mm

Replacement HSS bits for metric hex drivers! The bits made from HSS steel

Please note which screwdriver set is it, those bits have thickness into handle of approx 3.5mm (regardless the size of the bit)

Availiable sizes are:

  • 0.9mm
  • 1.3mm
  • 1.5mm

€4.00


€3.31 Ex VAT
Quantity
Hex Screwdriver Replacement Titanium Coated HSS Bit Long version 1.5/2/2.5mm

Hex Screwdriver Replacement Titanium Coated HSS Bit Long version 1.5/2/2.5mm

Replacement HSS Titanium coated bits for metric hex drivers! The bits made from HSS steel with Unique Titanium coating

Please note which screwdriver set is it, those bits have thickness into handle of approx 3.5mm (regardless the size of the bit)

Availiable sizes are:

  • 1.5 mm ( To fit 2 mm Hex screws)
  • 2.0 mm( To fit 2.5 mm Hex screws)
  • 2.5 mm( To fit 3.0 mm Hex screws)

€5.00


€4.13 Ex VAT
Quantity
Hexa Screwdriver SET

Hexa Screwdriver SET

Super hard screwdriver head made by high alloy steel (HSS) ,wear and distortion resisting!
Anodized CNC aluminum handle , inside place for components and screws!

4 Hex  screwdrivers in set, with the following sizes.

  • 1.5mm
  • 2.0mm
  • 2.5mm
  • 3.0mm


€19.00


€15.70 Ex VAT
Hexagon ScrewDriver Set Black gold with Stainless tips 1.5-2.0-2.5-3mm

Hexagon ScrewDriver Set Black gold with Stainless tips 1.5-2.0-2.5-3mm

Hexagon Screw Driver Set Black gold with Removable Stainless tips 1.5-2.0-2.5-3mm
Those tips are made from Hardened Steel with Titanium plating.

Super hard screwdriver head made by HSS high alloy steel,wear and distortion resisting!

Purifier handle made by aluminum alloy CNC , inside can place components and screws!

€22.00


€18.18 Ex VAT
Quantity
Kavan Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

Kavan Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

kAVAN Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

Sock 1 pcs, Iron is not included

€5.90


€4.88 Ex VAT
Quantity
Kavan Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

Kavan Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

Kavan Original Cotton Sock For Sealing Iron / Iron Cotton Cover / Protective Cover

Sock 1 pcs, Iron is not included

€5.90


€4.88 Ex VAT
Quantity
Metric Coarse Threading Die, M1.6 High Speed Steel

Metric Coarse Threading Die, M1.6 High Speed Steel

Metric Coarse Threading Die, M1.6 High Speed Steel

Manufactured to DIN223B  standards  the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

€6.90


€5.70 Ex VAT
Quantity
Metric Coarse Threading Die, M2.0  High Speed Steel

Metric Coarse Threading Die, M2.0 High Speed Steel

Die for 2.0 mm DIN 223B, HSS

Manufactured to DIN223B  standards  the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

€6.90


€5.70 Ex VAT
Quantity
Metric Coarse Threading Die, M2.3  High Speed Steel

Metric Coarse Threading Die, M2.3 High Speed Steel

Die for 2.3 mm DIN 223B, HSS

Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

Set of 1 Die

€6.90


€5.70 Ex VAT
Quantity
Metric Coarse Threading Die, M2.5  High Speed Steel

Metric Coarse Threading Die, M2.5 High Speed Steel

Die for 2.5 mm DIN 223B, HSS

Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads.

€6.90


€5.70 Ex VAT
Quantity
Mikado helicopters Tool Set for VBar Control #05577

Mikado helicopters Tool Set for VBar Control #05577

Stainless steel socket wrench for the finishing caps of all switches

T6 socket wrench for all T6 Torx bolts in VBar Control

Spare plungers for fine-adjustment of the power button

€29.90


€24.71 Ex VAT
Quantity
Mini POCKET SIZE plier with screw extractor PZ-57 jaws neji-saurus Made In Japan

Mini POCKET SIZE plier with screw extractor PZ-57 jaws neji-saurus Made In Japan

This is the Mini size- Pocker size Multi-purpose Extraction Tool for Stubborn Fasteners... Bite it !!, This combi plier *with* 'stripped' screw extracting jaws (watch the VIDEOs), engineer pz-57 gt neji-saurus Japan Made.

Once you hold the perfect Moulded Silicon/Rubber grips, you will understand the quality of this tool. its not another Plier, it is THE one you were waiting for it. Perfect to use in Hobby, Home and almost every possible industry. It works where others failed.

Unique jaws with both vertical and horizontal serrations grip a screw head securely without slipping, helpful in confined area

Just Grip and Turn !! -- Much faster than fluted screw extractor and simpler than vise grip pliers ..... Must in your tool box as a workshop, repair or DIY tool !!

Screw Adapted

  • Dome(Truss) Head
  • Round or Pan Head
  • 2~dia. 5.5mm
     
  • Beyond pliers! (these innovative pliers are presently taking Japan by storm
  • Have you ever been faced with a rusty, stripped, damaged or jammed screw and couldn't remove it? The PZ-58 Neji-saurus can do the job with remarkable ease.
  • These pliers will even remove screws that have special, unique or tamper-proof slots.
  • These pliers have a patented design of vertical and horizontal serrated inside jaws which bite/grip into screw heads of various shapes without slipping.
  • These jaw serrations are what differentiate screw-removal pliers from ordinary common pliers.
  • They are much easier to use than screw extractors or locking pliers precisely because of the way it grips around truss, round or pan head screws.
  • The specially shaped vertically-serrated jaws are designed to work in confined spaces.
  • The elaborate angle of jaw serrations, even allows the jaws to bite and turn truss screws (low-profile dome heads!). Custom protective cap also available as Option.

Be sure to see videos to understand the wonders of this product.

  • Elaborate angle of serrations also enables you to bite a dome head
  • Slender design of jaws ideal for work in confined areas
  • Comfortable grips made of Elastomer (TPR), also good for global environment
  • Spring for repeated work of gripping, turning and releasing
  • Wire cutter equipped

€18.90


€15.62 Ex VAT
Quantity
Multi function combi Screw removal plier extracting jaws engineer PZ-58 Made In Japan

Multi function combi Screw removal plier extracting jaws engineer PZ-58 Made In Japan

Multi-purpose Extraction Tool for Stubborn Fasteners... Bite it !!, This combi plier *with* 'stripped' screw extracting jaws (watch the VIDEOs), engineer pz-58 gt neji-saurus Japan Made.

Once you hold the perfect Moulded Silicon/Rubber grips, you will understand the quality of this tool. its not another Plier, it is THE one you were waiting for it. Perfect to use in Hobby, Home and almost every possible industry. It works where others failed.

Unique jaws with both vertical and horizontal serrations grip a screw head securely without slipping, helpful in confined area

Just Grip and Turn !! -- Much faster than fluted screw extractor and simpler than vise grip pliers ..... Must in your tool box as a workshop, repair or DIY tool !!

Screw Adapted

  • Dome(Truss) Head
  • Round or Pan Head
  •  3~dia. 9.5mm
     
  • Beyond pliers! (these innovative pliers are presently taking Japan by storm
  • Have you ever been faced with a rusty, stripped, damaged or jammed screw and couldn't remove it? The PZ-58 Neji-saurus can do the job with remarkable ease.
  • These pliers will even remove screws that have special, unique or tamper-proof slots.
  • These pliers have a patented design of vertical and horizontal serrated inside jaws which bite/grip into screw heads of various shapes without slipping.
  • These jaw serrations are what differentiate screw-removal pliers from ordinary common pliers.
  • They are much easier to use than screw extractors or locking pliers precisely because of the way it grips around truss, round or pan head screws.
  • The specially shaped vertically-serrated jaws are designed to work in confined spaces.
  • The elaborate angle of jaw serrations, even allows the jaws to bite and turn truss screws (low-profile dome heads!). Custom protective cap also available as Option.

Be sure to see videos to understand the wonders of this product.

  • Elaborate angle of serrations also enables you to bite a dome head
  • Slender design of jaws ideal for work in confined areas
  • Comfortable grips made of Elastomer (TPR), also good for global environment
  • Spring for repeated work of gripping, turning and releasing
  • Wire cutter equipped

Optional- Silicone pliers cover 

€23.90


€19.75 Ex VAT
OS Engine Tools Piston Pin Retainer Plier #OS71492000

OS Engine Tools Piston Pin Retainer Plier #OS71492000

A tool to remove and set in piston clips. Tips are curved and an inner side of the tip is grooved to hold a piston clip tightly.

€67.00


€55.37 Ex VAT
Quantity
Precision Adjustable Handle

Precision Adjustable Handle

Handles come with Collet Lock for adjustable blade lengths
Long tapered handle design for reach and accessibility Finger Tip Rotation Control Cap For Precise Turning Handles .
Made in Germany by: Wiha Quality Tools

€6.00


€4.96 Ex VAT
Quantity
Professional HSS 8 in 1 Hex Socket driver Hexagon Screwdriver with interchangeable Bits

Professional HSS 8 in 1 Hex Socket driver Hexagon Screwdriver with interchangeable Bits

Professional Steel HSS 8 in 1 Screwdriver Set RC Repair Tool Kit Hexagon Socket for RC Car Drone Plane Hex Philip Spanner Socket Hexagon

Features:
100% brand new and high quality.
Surface oxidation process, appearance, corrosion resistance
A mesh surface processed rough surface, increasing friction, more comfortable
Hollow handle, with storage function, temporarily inapplicable terminals may be placed in the handle, then remove, if applicable

Specifications:

Handle length:106mm / 4.17inch
material: aluminum
Bits material HSS steel

Package Contents:

1 x 1.5 mm Hex Screw Driver
1 x 2.0 mm Hex Screw Driver
1 x 2.5 mm Hex Screw Driver
1 x 3.0 mm Hex Screw Driver
1 x 0#+ Phillips screwdriver
1 x 1#- Flathead screwdriver
1 x 5.5 mm Socket Key Hex Hexagonal
1 x 4.0 mm Socket Key Hex Hexagonal
1 x Screwdriver handle

€19.00


€15.70 Ex VAT
Quantity
Professional KAVAN Sealing Iron Profi LCD with stand

Professional KAVAN Sealing Iron Profi LCD with stand

Professional modelcraft sealing iron; body body with non-sticking coating, very precise electronic temperature control and digital display of operating temperature on LCD display.

  • For ironing model coating foils and fabrics of all types
  • Precise digital temperature control from 100°C to 220°C
  • Precise temperature display on LCD screen
  • Measurement in degrees Celsius (°C) or Fahrenheit (°F)
  • Precise thermostatic temperature control with LED indication of operation
  • Smooth body with non-sticking coating prevents scratching of the coating
  • Light weight for safe ironing on soft balsa wood
  • Supplied with safety metal stand and sleeve
  • Ergonomically shaped handle for comfortable working
  • Safety automatic shut-off after 6 hours

Set includes: iron PROFI LCD, iron stand, protective sleeve, instructions.

WARNING: Before coating, pay maximum attention to remove dust from the model structure and from the entire workshop area. Dust not only deteriorates the adhesion of the foil, but also contains small grains of de-rolled sandpaper, which can in a short time degrade the Teflon coating of the iron and of course also scratch the ironed foil.

    Supply voltage [V]: 230 ; Weight [g]: 390 ; Length (overall) [mm]: 350 ; Length (seal iron body) [mm]: 115 ; Width (seal iron body) [mm]: 59

€57.00


€47.11 Ex VAT
Quantity
Professional ratchet Crimping tool for Coax SMA, SMB, SMC, TNC, N-Type, MCX, MMCX

Professional ratchet Crimping tool for Coax SMA, SMB, SMC, TNC, N-Type, MCX, MMCX

Our tool frame is made  from top quality hardened Steel for long life use, it features a ratchet controlled cycle mechanism to ensure a correct crimp every time and is fitted with a precision manufactured die set to crimp coaxial connectors with very small diameter cables RG316, RG179 , RG174Cables, SMA SMB MCX TNC SMC BNC Connectors.

The Crimp tool hexagonal across flats dimensions are:

.042''(1.07mm)
.068''(1.73mm)
.078''(1.98mm)
.128''(3.25mm)
.151''(3.84)
.178''(4.52mm)

€36.00


€29.75 Ex VAT
Quantity
Professional Universal 0-14mm Reaming Knife Drill Tool Knife Edge Reamer

Professional Universal 0-14mm Reaming Knife Drill Tool Knife Edge Reamer

  • Material: Durable Hard Steel and Aluminum Alloy Handle
  • Professional 0-14mm reaming knife,cut through car and helix body shells with ease.
  • Also great for resizing props.
  • Much better than scissors and allows you to make the perfect hole size.
  • Stainless steel, high quality and durable,very comfortable handle.

€12.00


€9.92 Ex VAT
Quantity
Professional Wire Cutter

Professional Wire Cutter

The Avizar Professional Wire Cutter is a high performance tool specially for modelers that wants to perform a professional quatility work.

€11.00


€9.09 Ex VAT
Prolux Thermal Sealing Iron with Stand Eu 2-Pin Plug #PX1361A

Prolux Thermal Sealing Iron with Stand Eu 2-Pin Plug #PX1361A

PROLUX THERMAL SEALING IRON w/STAND - EU 2-PIN PLUG

For any heat shrink film or fabric covering. Teflon coated shoe and safety holding stand. New design shape makes fillets and curves easy.

Temperature range 55°C to 205°C (131°F to 401°F)

€49.00


€40.50 Ex VAT
Quantity
Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Carry Case

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Carry Case

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Carry Case


Jaw set 58B:0.25-1.5 24-16AWG Suitable for Plug spring terminal

Jaw set 02C:0.25-2.5 22-14AWG Suitable for Pre insulated terminal

Jaw set 06WF:0.25-6.0 24-10AWG Suitable for Tubular terminal

Jaw set 2546B:2.5-6.0 22-14AWG Suitable for MC4 terminal

Jaw set 2549:0.08-1.0 28-18AWG Suitable for Bare terminal

Jaw set 6:0.5-6.0 24-16AWG Suitable for Bare terminal

Jaw set 03H:1.07,1.72,1.98,3.25,4.52 Suitable for Coaxial cable

€39.00


€32.23 Ex VAT
Quantity
Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Soft Case

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Soft Case

Ratchet crimping pliers with Quick release Interchangeable Jaws, set with 6 sets of Jaws and Case

Jaw set 58B:0.25-1.5 24-16AWG Suitable for Plug spring terminal

Jaw set 02C:0.25-2.5 22-14AWG Suitable for Pre insulated terminal

Jaw set 06WF:0.25-6.0 24-10AWG Suitable for Tubular terminal

Jaw set 2546B:2.5-6.0 22-14AWG Suitable for MC4 terminal

Jaw set 2549:0.08-1.0 28-18AWG Suitable for Bare terminal

Jaw set 6:0.5-6.0 24-16AWG Suitable for Bare terminal

Jaw set 03H:1.07,1.72,1.98,3.25,4.52 Suitable for Coaxial cable

€39.00


€32.23 Ex VAT
Quantity
Replacement HSS Bits for RC screwdrivers

Replacement HSS Bits for RC screwdrivers

Replacement HSS bits for metric hex screwdrivers! The bits made from HSS steel ,2 possibilities:

1- has the ultra-hardened precision type hex end
2- has the hardest ball-hex ends we have seen!

1.5, 2, 2.5 and 3mm sizes.

€4.00


€3.31 Ex VAT
Quantity
Page of 3