Producer of Cellpro Power Lab chargers
Revolectrix CellPro Power Lab 8X2 PL8 Duo, delivered with adaptors to JST/XH
Selectable charge rates range 10mA to 40A per channel
Welcome to PowerLab 6, the second offering in the amazing Cellpro PowerLab series from FMA Direct and Revolectrix. Built on the same framework as the original Cellpro PowerLab 8, this latest Battery Workstation provides a virtually identical feature-set as the original. Capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, PL6 is optimized to balance the need for high power, high current operations against the need for small size and affordability. The PowerLab 6 consumes some 23% less volume (size) than the original PowerLab 8.
Delivered with Balancer adaptor only, no extra wires
The industry's first 1344W workhorse! So much more than a charger, we had to call it something else, so we chose to label it a "Battery Workstation". Capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, PL8 represents the end of all speculation about who sells the most powerful battery management system in its class for the best value. If for no other reason, the competition will be scratching their heads trying to figure out how to catch up to this one. Add to these facts, the industry's first, well-conceived plan to support safe parallel charging of virtually any number of same-cell-count packs all at once, and you will realize that the investment in PL8 has paid for itself many times over. You no longer need more batteries. You need a battery workstation that can charge, discharge, cycle or monitor many packs faster than you can fly them to depletion!
Charger delivered with BALANCER adaptor JST XH
This special cable is required to interface the Revolectrix MPA or SPA to the Cellpro 10XP charger. The cable is 12 inches long, and includes a JST XH on one end and a JST PA (Cellpro) connectors on the other end
Hook up your Charger to a lead-acid battery or a large power supply with these heavy duty alligator clips.
Two feet of 10 AWG wire give you plenty of flexibility to make your connection, and with clips rated for up to 60 amps, you can draw all the power you need for even the heaviest load. At the charger end of the cable, a female EC5 connector is ready to make an easy connection to your PL8 or PL6's input cable. can fit other chargers with a chance of the end connector
Input Connectors: Alligator Clips
This special cable is required to interface the Revolectrix MPA or SPA to GT500, GT1200 and other brand, 8 cell chargers having XH compatible balance connectors.
Revolectrix Cell Pro 10 TP/PQ Adapter Board CP10STP/PQ
The Cellpro 10S adapters will interconnect 2s to 6s battery packs. The Cellpro 4s adapters listed on this page may be used with the Cellpro 10s charger by connecting to the 5s-to-4s adapters that come standard with every Cellpro 10s charger. The Cellpro 10s adapters listed on this page will not interconnect with the Cellpro 4s charger.
Alternately, on battery packs larger than 6s that implement the wiring scheme used on Thunder Power packs, you may use two adapters (PN:CP10S-TP/PQ6S) from FMA to charge one pack. One adapter must be plugged into channel one on the Cellpro 10s charger, while the second adapter must be plugged into channel two. Each of the two balancing tap connectors on the pack will then plug into the separate FMA adapters based on the number of series cells in the pack. Example: You have a 10s Thunder Power pack wired as (2) 5s packs in series. The balancing tap connector from the first 5s pack will plug into the 5s port on the adapter and channel one on the CP10s. The balancing tap from the second 5s series pack will plug into the 5s port on the second adapter on channel two of the CP10s. In this example, the second pigtail coming off of each of the CP10S-TP/PQ6S adapters does not get connected to anything. This second pigtail, labeled "Connect for 6s Only" is required only when a single, 6s pack is connected to the Cellpro 10s charger.
Revolectrix MPA Board adapter cable to PL6 and PL8
This special cable is required to interface the Revolectrix MPA to either the Cellpro PowerLab 6 or PowerLab 8 Battery Workstations.
Revolectrix PowerLab 8 Safe Parallel Balance Adapter (JST-XH/EH) Cellpro (JST PA) PowerLab-to-Great Planes (JST XH) or Kokam (JST EH/HR) CP8S-GP/KO6S-PAR
This is the Revolectrix PL8 Safe Parallel Balance Adapter, and is intended for use with the Revolectrix Power Lab 8 charger. This adapter supports one battery pack at a time and may be daisy-chained with other Safe Parallel Adapters. Designed to support multiple parallel pack, node-plus-discharge (high current) charging applications.
Interconnects any 2S to 6S XH/EH balance tap equipped battery pack to the Power Lab 8. Multiple, on-board SMT polyfuses (automatic resetting fuses) protect the adapter and charging circuitry from damage from wrong interconnections, reverse polarity, et
SPA is a Signle-Port Safe Parallel Adapter for charging one pack at a time or safely interconnecting same-cell-count LiPO batteries in parallel via daisy-chaining.
SPA-XH uses the same interconnect cables as the MPA-XH.
The SPA includes a custom header. A single connector supports any cell count from 2s through 8s.
IMPORTANT: SPA-XH is a native XH adapter. It requires a charger capable of running XH WIRING MODE; e.g., Cellpro 10XP, PowerLab series, or other brands which support XH batteries directly.
Copyright © 2000-2019 eRCMarket. All Rights Reserved.