Fuel Pumps

CNC Electric Bi-Directional Fuel Pump for Nitro/Gas RC (XT60 Connector)

Key Features:

Treaded fuel cap design allows direct installation to Fuel Bottle (CoolPower/Cosmo/Top Power)
All metal core for long live.
Unibody Design to prevent cross contamination.
Ready for both Nitro and Gasoline.
Bi-Direction Fuel Pump.
Operating voltage: 3.7 - 7.4 V (Can be powered by 1S- 2S LiPo).
Convenient XT60 Connector (Female).
Flow Rate: Up to 1000CC/Minutes.
Ultra Portable:186g.
Factory Setting:  "-" is forward , "=" is Reverse
Operating Instruction:
Start with slow speed (~3.7 V).
After the pump filled with switch to high speed (Up to 7.4V ).
For maximum performance, keep length of fuel line at Fuel Clunk less than 30cm.

• High Quality CNC Metal
• Plug-m-play
• Easy to Install
• Select Your Fuel Flow Rate
• All Screws and Zip Ties Incluted

Caution:
The core of this pump is made of high precision and high speed mechanical components; make sure the fuel is clean (Use Fuel Filter as needed).
The Fuel follows through the pump lubricates the mechanical components of the pump. Don't keep the pump running without pumping any fuel; it could cause excessive wear and tear to the mechanical components of the pump
Do not pump high temperature fuel/fluid, thermo expansion could cause excessive wear and tear to the mechanical components of the pumps.

High quality CNC electric fuel pump is designed for nitro or gas for rc models like planes, boats or cars.

Specs:

•     Working Voltage: 4.8-6v
•     Flowrate: 1000cc/minute
•     Lift: 0.8M
•     Weight: 175g

Product Features:

• All-metal gear parts= long life
• Fully enclosed motor design, high security;
• Fully shielded metal housing, no interference;
• Reverse switch
• High efficiency, low operational voltage 4.8v
• Comes with mounting brackets, screws can also be fixed with cable ties can be used;
• Polyurethane seals, fits methanol or gasoline

DLE Manual Fuel Pump

Rechargeable DLE Electric Fuel Pump For Gas/Nitro RC Airplane Aircraft
High Flow Mobile Charging Bidirectional Electric Fuel Pump for Methanol Gasoline for DLE Aircraft Model UAV

Long: 180 mm wide 43 mm oil nozzle length: 10 mm oil nozzle: 5.5 mm
Weight: 497g (single oil pump) oil filter: 6G weight hammer: 20g copper oil nozzle: 6g

Fuel Station Metal 10L with Pump and Battery 3S 2200Mah

•    Tidy, good looking design
•     High-quality steel tank
•     Large footprint for extra stability
•     Bleed/Airation screw
•     Powerful, very quiet pump
•     Refueling and defuelling
•     High quality gear pump with industrial seals
•     High flow rate (1,0 liter of gasoline in 60 seconds at 11,1V)
•     3S 2200mAh Lipo included (Up to 30 liters depending on conveying medium and hose cross-section)
•     Battery voltage monitoring via LCD display
•     Ball Valve for safe storage and transport
•     System connections Festo
•     Gasoline spiral hose ca. 1,0m working length

Specifications:

    Dimensions and contents: 390 x 240 x 215 mm / 10 Liter
    Weight without contents: 3,1 Kg

Hand cranked fuel pump suitable for use with both Glow & Gasoline.
Supplied complete with silicone tubing, filtered pick-up and fuelling nozzle.

Miniature aircraft 90 Degree Fuel Fitting Set, SET OF 1 full 90 degrees fitting

Prolux Fast Fueller Hand Pump - Black/Blue

Hand Fuel Pump for quick clean and easy fueling. Will fill or drain. Complete with fittings

Funky, Functional and Fast Prolux's latest 'Fast Fueller' hand pump is available in two stylish colour finishes of red and blue.
Special TPR material provides a comfortable feel, while an improved gearmesh and overdrive create the large flow rate of 18cc a second.
The advanced pump unit design is compatible with both glow and gasoline fuels and it comes complete with filter nozzle and silicone fuel tubing.

Specifications:

• Dimensions (approximately): 105mm x 52.5mm x 60mm
• New generation fuel pump with compact size
• Double injection, using TPR material that has a comfortable feel
• Improved gear mesh and make the large flow rate 18cc/sec
• Advanced pump unit design, glow fuels and gasoline are both compatible
• Includes filter fuel nozzle and  silicon fuel tubing

Prolux Fast Fueller Hand Pump - Black/Red

Hand Fuel Pump for quick clean and easy fueling. Will fill or drain. Complete with fittings

Funky, Functional and Fast Prolux's latest 'Fast Fueller' hand pump is available in two stylish colour finishes of red and blue.
Special TPR material provides a comfortable feel, while an improved gearmesh and overdrive create the large flow rate of 18cc a second.
The advanced pump unit design is compatible with both glow and gasoline fuels and it comes complete with filter nozzle and silicone fuel tubing.

Specifications:

• Dimensions (approximately): 105mm x 52.5mm x 60mm
• New generation fuel pump with compact size
• Double injection, using TPR material that has a comfortable feel
• Improved gear mesh and make the large flow rate 18cc/sec
• Advanced pump unit design, glow fuels and gasoline are both compatible
• Includes filter fuel nozzle and  silicon fuel tubing

Specially used Silicone Nitro fuel line 5x8mm for Pumps and field boxes

• 5mm ID
• 8mm OD
• Length of 1m

This is a premium translucent innder diameter of 3.2 mm , replacement Tygon fuel line for many small engine applications .Maintains air tight seal on fittings, even in extreme temperatures. Translucent material resists swelling & hardening.

Made for gas engines, pack of 1 meter

Size 3.2 x 6mm

Vertical Pump, with Base.

Works from a 12V power source Alligator style battery clips, Fill-off-empty switch positions.
For use with glow fuel only

Made for gas engines, pack of 1 meter, avaliable in Red or Yellow.