Glow Plugs & Acc

Glow Plugs & Acc

Here you can find Glow plugs and accessories related to Glow plugs, Glow starters, etc..

Align Beast-X Governor Sensor TN70/600N/700N  New version #HEGBP002

Align Beast-X Governor Sensor TN70/600N/700N New version #HEGBP002

Suitable for TN70 / T-REX 600N / T-REX 700N.
Must with Microbeast flybarless system. From experience works also on other systems.
Beastx Governor Sensor x 1(28AWG/305mm/6Pin)
RPM Magnet x 2

€14.99


€12.39 Ex VAT
Quantity
Black Cross Hex Socket Spanner 5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

Black Cross Hex Socket Spanner 5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are :5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

€5.00


€4.13 Ex VAT
Quantity
Enya # 3 (Hot) Glow Plug for Nitro Helicopters & Airplanes

Enya # 3 (Hot) Glow Plug for Nitro Helicopters & Airplanes

Enya # 3 Glow Plug for Nitro helicopters: Works excellent with all Helicopter engines, also a general great glow plug for cars, airplanes and boats

A very popular tried and tested 2 stroke plug. Slightly hotter than standard and great for easy starting. A high quality plug.
 

€11.30


€9.34 Ex VAT
Quantity
Enya # 3 (Hot) Glow Plug for Nitro Helicopters & Airplanes , Pack of 10

Enya # 3 (Hot) Glow Plug for Nitro Helicopters & Airplanes , Pack of 10

Enya # 3 Glow Plug for Nitro helicopters: Works excellent with all Helicopter engines, also a general great glow plug for cars, airplanes and boats

A very popular tried and tested 2 stroke plug. Slightly hotter than standard and great for easy starting. A high quality plug.

Set /blister card of 10 x Enya 3 glow plug
 

€95.00


€78.51 Ex VAT
Quantity
Glow plug SE Booster Cord full Set

Glow plug SE Booster Cord full Set

Glow plug SE Booster Cord full Set

€34.00


€28.10 Ex VAT
Quantity
Glow Starter with Meter for Sub-C Battery (Battery not included)

Glow Starter with Meter for Sub-C Battery (Battery not included)

Glow Starter with Meter for Sub-C Battery (Battery not included)

This is a glow starter with aluminum case suitable for most methanol/nitro glow engines.

Specs:

  • Battery Size: Sub-C/SC NiMH (sold separately)
  • Length (total): 148mm
  • Diameter: 26.5mm
  • Weight: 61.5g (without battery)

Not included - Sold separately:

  • Sub-C NiMH battery cell
  • Charger

€24.90


€20.58 Ex VAT
Quantity
Kinisy RPM Sensor Hall effect sensor with 250mm wire

Kinisy RPM Sensor Hall effect sensor with 250mm wire

RPM Sensor – a compact, high-performance solution for accurate RPM detection in demanding RC applications. Designed with precision and ease of use in mind.

Features:

  • LED Magnet Indicator: An on-board red LED lights up when a magnet passes, confirming detection and making it easier to setup.
  • Onboard voltage regulator: Onboard voltage regulator to ensure operation with FBL/RX from all manufacturers and ensures reliable operation.
  • High-sensitivity Hall effect sensor: High sensitivity Hall effect sensor allowing further distance between the magnet and sensor allowing easier setup and more reliable detection.
  • ESD Suppression: Electrostatic discharge protection to prevent unwanted voltage spikes from damaging the RPM sensor or FBL/RX

Included

  • 1x RPM Sensor with 250mm 22AWG cable
  • 2x M2.5 Bolt
  • 2x M2.5 Nylon Washer (1mm)
  • 2x M2.5 Black Carbon Steel Nylon Locking Nut

€17.95


€14.83 Ex VAT
Quantity
MAXX SmartGloo Glow Plug Igniter for MAXX Flybarless system

MAXX SmartGloo Glow Plug Igniter for MAXX Flybarless system

MAXX SmartGloo Ignitor is the most advanced, most smart and most safe glow igniter on the market.

MAXX SmartGloo is an Auto Switch Glow igniter for nitro engines.

  • - Automatically activated glow when it detects the machine starting, no needs to do anything on the transmitter, everything is completely automatic. No need external Glow plug starter. Just mount it on your helicopter and forget about it.
  • - Automatically turn off by 5 seconds timeout.
  • - Smart Safety feature: Prohibiting engine start when detecting high throttle. Only start the engine when the throttle is less than 25%.
  • - High current: 1.3V – 6A maximum output.
  • - Input: 5V to 10V.
  • - Using original components of the world’s leading semiconductor Step-Down ICs.

High performance, needs only 1A/7.4V BEC input for 5A output to glow plugs.

- Very light weight, only a few grams.

- NOTE: Need to place magnets on the engine fan or use the RPM sensor to reads the engine crank shaft.
 - NOTE: This  igniter is only compatible with Maxx Flybarless.

€45.00


€37.19 Ex VAT
Quantity
On Board Glow System Ignition Drive Glow Plug Driver RCXL for Nitro  Model

On Board Glow System Ignition Drive Glow Plug Driver RCXL for Nitro Model

RCEXL on board glow system, can be controlled by hand Button or remote controller, new design with heat sink
perfect for Airplanes or Helicopters and other RC glow engines to insure perfect Idle, avoid Engine cuts

  • Separate design, it can be taken off under remote control mode, to reduce weight
  • Compatible with car engines, with spring lock structure inside, never loose
  • With 3 LED indicators, to know the working state of the drive
  • Manual switch with ring type LED light for decoration
  • Small size, light weight
  • Wide range of voltage, input 4.5V~12.6V

This on board glow system does not have low voltage protection; please pay attention to the battery power during using. (Recommend 2S liPo battery)

€35.00


€28.93 Ex VAT
Quantity
OS #8 Glow Plug (Medium Hot) for 2-Stroke Engines

OS #8 Glow Plug (Medium Hot) for 2-Stroke Engines

This is the OS #8 Glow Plug for 2-Stroke R/C Engines.

The O.S. #8 glow plug is the most widely used O.S. glow plug. This works with most 2-stroke aircraft engines, as well as some 2-stroke car and truck engines.

Features:

Medium heat range plug for most model engine applications

Plug is medium length, without idle bar For all standard 2-stroke engines

Includes: One glow plug and one brass washer

€9.50


€7.85 Ex VAT
Quantity
OS #8 Glow Plug (Medium Hot) for 2-Stroke Engines - Blister of 12pcs

OS #8 Glow Plug (Medium Hot) for 2-Stroke Engines - Blister of 12pcs

This is the OS #8 Glow Plug for 2-Stroke R/C Engines. this is a special deal for 12 pcs of OS8 glow plug.

-Our products comes from OS Japan, it is pure and original product. 

The O.S. #8 glow plug is the most widely used O.S. glow plug. This works with most 2-stroke aircraft engines, as well as some 2-stroke car and truck engines.

Features:

Medium heat range plug for most model engine applications

Plug is medium length, without idle bar For all standard 2-stroke engines

Includes: One glow plug and one brass washer

€135.00

€99.00


€81.82 Ex VAT 27% Off
Quantity
OS ENGINES #G5 Glow Plug Gas Plug G5 GGT 15 #OS71655001

OS ENGINES #G5 Glow Plug Gas Plug G5 GGT 15 #OS71655001

For use with O.S. GG series gasoline powered engines that use a glow plug instead of a spark plug for ignition
Specifically designed for a gasoline/oil mixture
Uses standard glow igniter

INCLUDES

G5 Glow Plug with Washer

COMMENTS

Not for use with glow (nitromethane) powered engines.

€19.90


€16.45 Ex VAT
Quantity
OS Engines Type F Glow Plug Med Four Stroke 4T# 71615009

OS Engines Type F Glow Plug Med Four Stroke 4T# 71615009

OS Engines Type F (4-Stroke) Glow Plug Med Four Stroke # 71615009

For all four-stroke motors including Saito, OS

€15.50


€12.81 Ex VAT
Quantity
Remote glow plug adapter -glow plug Extension with locking silicone cap

Remote glow plug adapter -glow plug Extension with locking silicone cap

Remote glow plug adapter with locking silicone cap

New Locking design, fits All glow plugs

€6.90


€5.70 Ex VAT
Quantity
Remote glow plug adaptor: glow plug Extension with Quick Clip

Remote glow plug adaptor: glow plug Extension with Quick Clip

Alligator Remote glow adapter, easy connection to the glow plug. another choice of the Remote adapters

€6.00


€4.96 Ex VAT
Quantity
Remote Glow plug connector: glow plug Extension with Quick Clip

Remote Glow plug connector: glow plug Extension with Quick Clip

Glow plug connector , with Glow head clip at the end.

€6.00


€4.96 Ex VAT
Quantity
SmartGlow Intelligent Onboard Glow Ignition driver

SmartGlow Intelligent Onboard Glow Ignition driver

SmartGlow is a high-performance, intelligent glow ignition system designed to deliver reliable, consistent glow with up to 14V input. Housed in a CNC-machined aluminum case, it’s built for durability and optimal thermal performance, with the PCB thermally bonded for maximum efficiency.

SmartGlow features an efficient voltage regulator capable of 12V input and outputs a stable 1.5V voltage to the glow plug providing a strong glow!

Features:

  • Glow Plug Detection: Automatically detects if a functioning glow plug is connected to the device.
  • Radio-Controlled Switch: Allows remote operation for added convenience.
  • Onboard Button: Provides easy manual control of the device to ignite the glow plug.
  • LED Indicator: Extremely bright RGB LED indicator which is easy to see in any lighting conditions.
  • Small size, 47.6x9.2mm
  • CNC Machined Aluminium 6061 housing

Included:

  • 1x SmartGlow
  • 1x 250mm 22AWG RX cable
  • 1x 250mm 22AWG Glow plug cable with crocodile clip

€64.00


€52.89 Ex VAT
Quantity
Stainless Large Cross Wrench Hex Socket 5.5mm 7mm 8mm 10mm 17mm

Stainless Large Cross Wrench Hex Socket 5.5mm 7mm 8mm 10mm 17mm

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are : 5.5mm 7mm 8mm 10mm 17mm

€6.00


€4.96 Ex VAT
Quantity