Beam Helicopters

Page of 4
Antirotation Plate

Antirotation Plate

BMH421123 - Antirotation Plate

€3.80

Inc. VAT
Quantity
Ball Link Set

Ball Link Set

Ball Link Set

€7.00

Inc. VAT
Quantity
Ball Link Set

Ball Link Set

Ball Link Set 18pcs

€3.90

Inc. VAT
Quantity
Battery Mount Plate

Battery Mount Plate

BMH421106 - Battery Mount Plate w/Hardware

€9.00

Inc. VAT
Quantity
Battery Mount Plate, Foam: E4-A

Battery Mount Plate, Foam: E4-A

Battery Mount Plate, Foam: E4-A

€6.00

Inc. VAT
Quantity
BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

Beam Brushless motor 4026-530KV, designed for most 550-600 models with up to 12s Lipos.Those motors are produced in Korea, make this product high quality motor.

Specifications:

  • Motor KV - 530KV RPM/Volt
  • Stator Arms - 12
  • Magnet Poles - 10
  • Motor Timing - 5deg
  • Drive Frequency - 8kHz
  • Input Voltage : 3-12s
  • Max Continuous Current - 65A
  • Max Continuous Power - 2850W
  • Weight (g/oz) - 631g / 12.734oz
  • Shaft size : 6mm

 

 

€149.00

Inc. VAT
Quantity
Beam 450 SE Tail Shaft (4)

Beam 450 SE Tail Shaft (4)

Beam Tail Shaft, for SE version only, 4 pcs in set

€6.60

Inc. VAT
Quantity
Beam Autorotation Case Advance

Beam Autorotation Case Advance

Beam Autorotation Case, for beam E4 Advance

€9.00

Inc. VAT
Quantity
Beam Blade Holder Guide Set FBL

Beam Blade Holder Guide Set FBL

This is a replacement Beam Blade Holder Guide Set, and is intended for use with the Beam E4 V2 Advance 450 class helicopter

€8.00

Inc. VAT
Quantity
Beam Control Rod Set (2)

Beam Control Rod Set (2)

Beam Control Rod Set (2)

€5.00

Inc. VAT
Quantity
Beam E4 - Tail Control Rod Set

Beam E4 - Tail Control Rod Set

Beam E4 - Tail Control Rod Set

€11.90

Inc. VAT
Quantity
Beam E4 450 size Autorotation One-way Sleeve

Beam E4 450 size Autorotation One-way Sleeve

Beam 450 Autorotation One-way Sleeve, 2 pcs in set

€4.20

Inc. VAT
Quantity
Beam E4 450 size Tail Pulley (x2)

Beam E4 450 size Tail Pulley (x2)

Beam E4 450 size Tail Pulley (2pcs),

Fits Beam  E4 version 402 and Advance

€7.80

Inc. VAT
Quantity
Beam E4 Advance SE 450 Flybarless Helicopter Kit

Beam E4 Advance SE 450 Flybarless Helicopter Kit

This is the Beam E4 Advance SE 450 Flybarless Helicopter Kit. A slop free CNC rotor head and control system, combined with a unique upright rubber tail servo mount system provides precise control that rivals any 450 size machine on the market. A simple frame design provides full support with two vertically stacked pieces of carbon fiber, high quality aluminum blocks, cross members and boom mounts, as well as carbon fiber trays. Additionally, the SE includes a redesigned tail housing, the ability to choose either a standard flybarless head or a DFC type head, and a fully serviceable swash plate, making the E4 Advance SE a true contender in the 450 class market.

Features:

  •   Includes parts for both standard flybarless and DFC type heads depending on pilots flying style
  •   Main shaft for both standard and DFC head types
  •   Non breakable main grip with 3 ball bearing + thrust bearing type vantage
  •   Red swash cap addition
  •   Re-designed tail housing addition
  •   Metal tail control system addition
  •   Now detachable shaft + pulley instead of inseparable previous shaft+pulley set
  •   Re-designed boom brace mount addition
  •   Boom brace connector much longer than previous addition
  •   Re-designed frame addition
  •   Metal tail servo mount for standard and mini size type servo mounting
  •   Innovative design allows for reduced weight, easy servicing and low parts count
  •   Durable Canopy with aerodynamic design
  •   Fully serviceable CNC swash plate
  •   Robust carbon fiber frames
  •   Ultra quiet direct drive tail system

Specifications:

  • Length: 660mm (26")
  • Height: 218mm (8.58")
  • Main Rotor Diameter: 723mm (28.46")
  • Tail Rotor Diameter: 150mm
  • Main Drive Gear: 150T
  • Main Drive Pulley: 51T
  • Motor Pinion: 11T or 13T
  • Gear Ratio: 1:13.6x4.25 or 1:11.5x4.25
  • Weight Less Power System: 645g (22.75oz)

Needed to Complete:

  •   Transmitter & Receiver
  •   Servos
  •   Flybarless controller
  •   Electronic Speed Controller & Motor
  •   Lipo Battery
  •   Battery Charger
  •   Tools

€249.00

Inc. VAT
Quantity
Beam E4 DFC Control Rod Lever

Beam E4 DFC Control Rod Lever

Beam E4 DFC Control Rod Lever

€20.00

Inc. VAT
Quantity
Beam E4 Tail Drive Belt

Beam E4 Tail Drive Belt

Beam E4 tail drive belt

€7.20

Inc. VAT
Quantity
Beam E4 Tail Drive Set with Ball bearings

Beam E4 Tail Drive Set with Ball bearings

BMH421401 - Beam E4 Tail Drive Set with Ball bearings

Fits Beam E4 model 402, and advance

€34.00

Inc. VAT
Quantity
Beam E6 avantgarde Landing Strut Pipes set

Beam E6 avantgarde Landing Strut Pipes set

Beam E6 avantgarde Landing Strut Pipes set

€6.60

Inc. VAT
Quantity
Beam E6 avantgarde Landing Strut set of 2

Beam E6 avantgarde Landing Strut set of 2

Beam E6 avantgarde Landing Strut set of 2

€11.00

Inc. VAT
Quantity
Beam E6 avantgarde O-Ring Set Hard 3d

Beam E6 avantgarde O-Ring Set Hard 3d

Beam E6 avantgarde O-Ring Set Hard 3d, 12 pcs

€6.00

Inc. VAT
Quantity
Beam E6 avantgarde O-Ring Set Hard 3d (6pcs)

Beam E6 avantgarde O-Ring Set Hard 3d (6pcs)

Beam E6 avantgarde O-Ring Set Hard 3d (6pcs)

€3.00

Inc. VAT
Quantity
Beam E6 avantgarde Tail Case Belt Guide Set

Beam E6 avantgarde Tail Case Belt Guide Set

Beam E6 avantgarde Tail Case Belt Guide Set

€14.90

Inc. VAT
Quantity
Beam E6 avantgarde Tail Servo Mount

Beam E6 avantgarde Tail Servo Mount

Beam E6 avantgarde Tail Servo Mount

€7.60

Inc. VAT
Quantity
Beam E6 avantgarde V2 Autorotation Set

Beam E6 avantgarde V2 Autorotation Set

Beam E6 avantgarde V2 Autorotation Set, and is intended for use with the Beam AvantGarde 600 class helicopter.

€23.90

Inc. VAT
Quantity
Beam E6 avantgarde Velcro (2 pcs)

Beam E6 avantgarde Velcro (2 pcs)

Beam E6 avantgarde Velcro (2 pcs)

€6.00

Inc. VAT
Quantity
Beam Flybarless Control Rod Guide Set

Beam Flybarless Control Rod Guide Set

Beam Flybarless Control Rod Guide Set (2)

€4.00

Inc. VAT
Quantity
Beam Helicopter E4 Special Edition 450 SE FBL Combo

Beam Helicopter E4 Special Edition 450 SE FBL Combo

This is the Beam E4 Advance SE 450 Flybarless Helicopter combo. A slop free CNC rotor head and control system, combined with a unique upright rubber tail servo mount system provides precise control that rivals any 450 size machine on the market. A simple frame design provides full support with two vertically stacked pieces of carbon fiber, high quality aluminum blocks, cross members and boom mounts, as well as carbon fiber trays. Additionally, the SE includes a redesigned tail housing, the ability to choose either a standard flybarless head or a DFC type head, and a fully serviceable swash plate, making the E4 Advance SE a true contender in the 450 class market.

Head

  • Choice between Flybarless Normal (Standard) and DFC types-depending on ones invidual flying style(contains both FBL Normal & DFC Head set)
  • Main shaft for both Standard & DFC Head types.
  • Non breakable Main Grip 3ball bearing + Thrust bearing type vantage.
  • Red Swash Cap addition.

Tail

  • Newly designed Tail Housing addition.
  • Metal Tail Control system addition.
  • Now Detachable Shaft + Pulley (instead of inseparable previous shaft+pulley set)
  • Newly designed Boom Brace Mount addition.
  • Boom Brace Connector (much longer than the previous one)

Frame

  • Newly designed Frame addition.
  • Metal Tail Servo Mount for Standard/Mini (Savox 1350 type) & Mini size type servos mounting

Included:

  • Beam SE 450 Kit with SWE Main carbon Blades
  • Scorpion Motor 2221-8
  • 40amp esc for helis, e.g Hobbywing or equal
  • 3 Cyclic servos Align or Savox
  • 1 Tail servo Align or Savox
  • FBL unit Microbeast ( possible to change to other choices)

Need to be completed:

  • Radio TX-RX
  • Flybarles System
  • Lipo battery  3s 2200

Specifications:

  • Length: 660mm (26")
  • Height: 218mm (8.58")
  • Main Blade Length: 325mm
  • Main Rotor Diameter: 723mm (28.46")
  • Weight (less power system): 645g (22.75OZ)
  • Main Gear: 150T
  • Main Drive Pulley: 51T

€510.00

Inc. VAT
Quantity
Beam Main Frame Guide Set

Beam Main Frame Guide Set

This is a replacement Beam Carbon Fiber Main Frame Guide Set, and is intended for use with the Beam AvantGarde 600 class helicopter.

€29.00

Inc. VAT
Quantity
Beam Main Rotor Hub

Beam Main Rotor Hub

Beam E4 - Main Rotor Hub

€18.00

Inc. VAT
Quantity
Beam O-Ring Set FBL

Beam O-Ring Set FBL

This is a replacement Beam O-Ring Set, and is intended for use with the Beam E4 V2 Advance 450 class helicopter.

€2.00

Inc. VAT
Quantity
Beam Pitch Linkage Set

Beam Pitch Linkage Set

This is a replacement Beam Pitch Linkage Set, and is intended for use with the Beam AvantGarde 600 class helicopter.

€6.00

Inc. VAT
Quantity
Beam SE 450 Tail Belt Pully

Beam SE 450 Tail Belt Pully

 Beam SE 450 Tail Belt Pully

€5.00

Inc. VAT
Quantity
Beam Tail Boom Brace Set - E600 Avantgarde

Beam Tail Boom Brace Set - E600 Avantgarde

Beam Tail Boom Brace Set

Use for:

  • E600 Avantgarde

€17.90

Inc. VAT
Quantity
Blade Holder Avantgarde

€5.00

Inc. VAT
Quantity
BMH421120 - Front Belt Guide Pulley Set

BMH421120 - Front Belt Guide Pulley Set

BMH421120 - Front Belt Guide Pulley Set

€9.90

Inc. VAT
Quantity
BMH421203 - Linkage Ball

BMH421203 - Linkage Ball

BMH421203 - Linkage Ball, 4.7x4.5mm

€8.00

Inc. VAT
Quantity
Page of 4