Sale

Brand new motor, never worked, but without original package

High torque brush-less motor with rotating drum and high power neodymium magnets suitable for models of 600 - 700 size, and up to 3000 g in weight. Due to it¡¦s high torque this motor is capable of turning large propellers with a high level of efficiency and without the need for a gearbox. Hardened steel shaft is supported by three ball bearings.

Trainer/High-Wing

• Recommended Model Weight: 2600g
• Lipo: 3S
• Max Current: 37A-60s
• Suggested Propeller: 12x5

Aerobatic/War-bird

• Recommended Model Weight: 2000g
• Lipo: 2S
• Max Current: 37A-60s
• Suggested Propeller: 12x6

3D

• Recommended Model Weight: 1500g
• Lipo: 3S
• Max Current: 37A-60s
• Suggested Propeller: 13x4

Sailplane

• Recommended Model Weight: 2400g
• Lipo: 3S
• Max Current: 37A-60s
• Suggested Propeller: 12x6.5

Equivalent to a .32 2 Stroke or .40 4 Stroke glow engine.

Blade CHROMA with Stabilized CGO2+ 1080p Camera ST10+, Backpack , 3 Lipos.

this product is Brand new- flew 2 times, perfect condition.

Fly to your heart’s content with up to 30 minutes of flight time due to the 5400mAh LiPo 3S battery
Three-axis brushless stabilisation gimbal gives you the ability to record smooth and steady videos
Be able to fly again in no time thanks to the extra full set of propellers supplied

Delivered scope:

Flight-ready Chroma drone with stabilized CG02+ HD camera
ST-10+ controller with touch-screen display
3 x Li-Po flight battery for 30 min. flight times
Flight battery charger with AC adapter
4 sets of Aeronaut carbon Spare propellers
ST-10+ screen shade
USB programmer cable
Backpack

 

Due the bad storage conditions in one of our warehouses, some of our bags got dirty. there is Absolutely no damage to zipper or material, its pure something can be washed. We want you to benefit from it, so we offer the bags at Very special discount. Bear in mind its a limited offer. Each bag is guarantied and will be checked again before shipping. See choice of sizes. Models  delivered in RED-YELLOW-BLACK color  

Free Helicopter Carry bag with each helicopter Kit Purchased. size will be delivered corresponding to the kit

Avaliable sizes 450-500-550-600

PLEASE note its a limited time offer.

Jeti DS-16 Transmitter Carbonline White edition 2.4Ghz Duplex Multimode, metal Case, Charger, Accessories

This is a brand new radio, in a box, but used to show to customers , total of 20-30 min work

This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features

State-of-the-art, up gradable firmware which gives you full freedom and complete control.

Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.

Mini USB port for firmware upgrades and PC download of telemetry data.

Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.

Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.

9-point, programmable curve mixes for all 16 digital proportional channels.

You can set up not just dual, but triple rates.

Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.

Unlimited use of the on-board 2GB SD card memory.

Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.

Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.

Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.

All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.

Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• Jeti Duplex DS-16 Transmitter
• Jeti Transmitter Neck Strap
• Jeti Transmitter Aluminum Case
• 110-230V Wall Power charger
• Tx Battery Jeti
• Receiver 
• Mini USB to USB PC Cable
• Instruction book

CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

this model is demounted from model, its brand new, but some signs of screws from the inside.

Fit motors up to 37mm in diameter.

Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
Double arm, e.g fits co-axial configuration.

Providing perfect Cooling:By conducting heat, and from ventilated design.

An upgrade for Sky hero, possibly fit other machines.

Included :

• 2 Half Arms, Made from CNC aluminum,
• Screws

The night flight with RC helicopter models is unique experience both for the pilot and the spectator. The illuminated MS Composit night blades utilize the same high performance carbon composite technology as other main rotor blades. Fully integrated light and power sources do not influence the blade aerodynamics, and allow for extensive aerobatics. Each blade is illuminated by two bright LEDs, which create two concentric circles. The night blade design makes the blade visible even in eye-level and inverted flight modes. The blade power source is NiMH cell. For cell re-charge we strongly recommend to use MS-00101 Charger.

• Weight: 210 g
• Length: 680 mm
• Blade type: Night-two colors
• Root: 12 mm
• Bolt: 4 + 5 mm
• Profile: 2S
• Recommended for brands: class 60 and 90

Navigator Series MN4014 330Kv Multicopter Motor-Mounted, never used. delivered in bulk. Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run! Features: 600mm soft silicone power wires Sealed Japanese EZO bearings Short, hardened Japanese steel shaft 0.2mm NdFeB stator plates Includes 6mm, 8mm and DJI style prop adapter. Specifications:

•   Model: MN4014
•   Motor size: 44.8L x 34.5D mm
•   Shaft diameter: 4mm
•   Weight: 150g
•   KV(rpm/v): 400
•   Max Power Continuous: 900W
•   Max Current: 30A
•   Max Efficiency Current: 3 - 12A >81%
•   Battery: 4 - 8s LiPo
•   Prop: 13 x 6.5 - 16 x 8
•   ESC: 40A

Like many of you already know, OXY HELI is part of the Lynx Heli Innovations Upgrade Heli Division own by Luca Invernizzi. After over 10 years of incredible upgrade experience and 5 years since the first OXY 3 changed how people looked at micro helicopters, now is time for the first BIG OXY HELI, the OXY 5 MEG (as MEGA).

This is the combo with the following components- be sure its hih quality parts included(brand is stock dependant):
(if you wish to go for other choice of components, please contact us)

Included in the kit:

• BLADES Mah or Align 600mm
• Tail blades Mah/Align/Zeal/ 95mm
• Motor Beam/Scorpion HKX-4025-550KV 6mm shaft
• ESC Hw or Tribunus 12s 80amp
• Servo: Savox titanium gear 1258/1257TG+ tail 1290mg
• Helicopter Bag 600 size

Like many of you already know, OXY HELI is part of the Lynx Heli Innovations Upgrade Heli Division own by Luca Invernizzi. After over 10 years of incredible upgrade experience and 5 years since the first OXY 3 changed how people looked at micro helicopters, now is time for the first BIG OXY HELI, the OXY 5 MEG (as MEGA).

This is the combo with the following components- be sure its hih quality parts included(brand is stock dependant):
(if you wish to go for other choice of components, please contact us)

Included in the kit:

• BLADES Mah or Align 600mm
• Tail blades Mah/Align/Zeal/ 95mm
• Motor HK4-4025-1100 6mm shaft
• ESC Hw or Tribunus 6s 120amp
• Servo: Savox titanium gear 1258/1257TG+ tail 1290mg
• Helicopter Bag 600 size

YUNEEC- Blade chroma GB203 White-GoPRO 3-4 Gimbal with MK58 downlink set

This COMBO is Brand new, Comes without original packaging. Was mounted on Chroma but not used . Gopro3+ INCLUDED

Easy PLUG N PLAY, you will only need to change the CAMERA selection in your control radio to GOPRO
The new GB203 3-Axis self-stabilizing gimbal is designed to work with GoPro’s Hero 3-4 camera, and can be mounted on the TYPHOON/ Blade chroma Multicopter as well as on the Steadygrip G ground handle.
Real time image transmission - which can be viewed on the ST10+ Ground Station - is achieved with the included MK58 Digital Video Downlink Module.
The TYPHOON G package with ST10+, GB203, MK58 and Steadygrip™, works with GoPro Hero3, Hero3+, Hero4 Black and Hero4 Silver.

Set including:

• GB203 gimbal
• MK 58 downlink with cable and antenna
• Gopro 3+