Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

LiPo 3/2800 11.1 V TX transmitter battery, square format.

With PCM protection circuit to guard against deep discharge and overcharging, suitable all Transmitters using 8 cell Nimh/nicd

The battery warning threshold must be raised to 10.8 V!
Dimensions approx. 95 x 30.5 x 27 mm
Weight approx. 160 g

 

FT-120YS 3D muffler. Compared to 90-class, the capacity of this muffler is 20% higher.

RX2SIM Wireless on the simulator!
No more annoying and too short cables between transmitter and RC simulator.

With the RX2SIM you are able to operate many well-known simulators with practically every remote control via radio.
This does not require a student socket on the transmitter, only a receiver suitable for the transmitter with sufficient channels must be available.

The RX2SIM is the link between the receiver and the interface belonging to the simulator.

The RX2SIM receives the receiver signals via a patch cable (included).
Single channels and all common single line receivers (PPM, Futaba S.Bus, SRXL, Spektrum DSM2/DSMX, JR DMSS) are supported.

The RX2SIM generates the corresponding student signal from the receiver signal and feeds it to the simulator interface.

In addition, the RX2SIM can also be operated as a joystick (game device).
All programs that support a joystick can be controlled via the RX2SIM.
This is especially useful because R/C simulators like the neXt CGM R/C Flight Simulator, Aerofly, FMS and also many shareware simulators are controlled with a Joysick interface.

The firmware of the RX2SIM can be updated future extensions can be easily retrofitted.

The RX2SIM supports as receiver system

• individual channels
• PPM-Serial
• Spectrum Satellite (DSM2 / DSMX)
• JR DMSS Satellite
• Futaba S.Bus/S.Bus2
• SRXL
• PPM-Serial Output signal
• Compatible with many well-known flight simulators (e.g. Phoenix R/C Pro Simulator, Real Flight R/C Flight Simulator)

USB modes

• Passive mode (passes a connected interface)
• Joysick emulation (neXt CGM R/C Flight Simulator, Aerofly, Heli-X, FMS, and many more)
• USB2SYS interface emulation (connects BEASTX devices to the PC)

Technical Specifications

• Operating voltage: 3.8V 6.0V (Typical 5V)
• Compatible operating systems: Windows, LINUX and MAC
• Dimensions (LxWxH): 92 x 42 x 20mm
• Weight: 32g

Includes

• RX2SIM USB Interface
• USB extension
• patch cable
• Instructions DE/ENG

New Version 2020 eXtended Long Range System D2 V3

Remote Controller with Radio Control and Mavlink / Transparent Data Link (15-30Km).
It is a professional system with minimalist design prepared for all types of applications FPV with 500mW RF Power and -110dBm of sensitivity to work between 15-30Km (LOS) and with a maximum range of 100km.
Two options available for free ISM band 866-950Mhz or 433Mhz.
Internal battery with duration of approximately 6 hours.
RC and Data Link data are secure with the AES128 encryption algorithm.
Is compatible with transparent data link and with the Mavlink protocol for communication with autopilots such as: Pixhawk, APM or similar.
Also from the XPAD2V3 Remote Controller you can communicate from USB or Bluetooht to routes software compatible with Mavlink such as: Mission Planner, QGround Control, similar or custom software to send / receive transparent data.

CONTENT:

• ​​1- XPAD2V3-89 (866-950Mhz). Remote Controller Radio Control  and Mavlink / Transparent Data Link.
• 1- RXLRS-89 (866-950Mhz). Professional Receiver Radio Control and Mavlink / Transparent Data Link.
• 1- DCDC38/5RC. DCDC Adjustable step down module, INP 4-38V, OUT 1.25-32V(Adjustable), Out current 5A.
• 2- ANTGSM900. Omnidirectional antennas 868-928Mhz 5dBi.
• 1- LAT54_SMAH/SMAM. Cable SMA-Female to SMA-Male, 540mm.
• 1- CABLE_SERVO_HH. Cable Servo RC Female to Female, 200mm.  
• 1- CABLE_EXT_SERVO_MH. Extensor Cable Servo RC Male to Female, 300mm.
• 1- CARXP217. Charger for remote controller XPAD.
• 1- CABLE_PX4_RX. Adapted Cable for Pixhawk-RX, 300mm.
• 1- CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
• 1- XLRS Neck Lanyard for remote controller XPAD.
• 1- Fuse 2A.

Mikado LOGO 800 Landing bow white

Mikado LOGO 800 Landing bow black

Mikado LOGO 800 Lower sideframe left

Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.

Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

1. Sky hero Spyder 6 frame set x 1( no canopy)
2. Motor Avizar 3536-380KV
3. ESC 40 amps
4. Propeller 14"
5. Distribution Board 100Amp
6. Hardware to mount the motors
7. Opale Paramodels Parachute

Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

• Sky-Hero Spyder 700 Kit (SKH00-401)
• ABS Painted Canopy
• 2x Red Color LED Lights (ALULED-016R)
• 2x White Color LED Lights (ALULED-016)
• 2x High Fluorescent Stickers (SKU46635)
• 10% saving coupon for your next order (coupon's details will be sent with the order)

Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

• Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
• Rescue Parachute for Sky-Hero Multicopters (OP17512)