SAB Raw/Urukay

Includes:

• Steel Tail Rotor Hub x 1pc
• Steel Tail Shaft x 1pc
• Tail Orings x 1pcs

Used for:

• Goblin Kraken

Includes:

- Aluminum Tail Side Plate x 1pc

- Flanged bearing 6 x 13 x 5 (F686ZZ) x 1pc

Used for:

- Goblin Kraken

Includes:

- Slider Bushing x 2pcs

Used for:

- Goblin Kraken

Aluminum Tensioner Idle x 1set

For: Goblin RAW 700

Includes:

• Titanium Main Linkage x 2pcs
• Ball Linkage x 4pcs

Use for:

• Goblin Urukay Carbon

Includes:

- Aluminum Main Structure Top x 1

- Socket Head Cap Screw M3 x 12 x 5pcs

- Radial Bearing 12 x 28 x 7mm ( 16001-2RS) x 1pc

- Radial Bearing 6x13x5 (MR686ZZ) x 3pcs

Used for:

- Goblin Kraken

Includes:

- Sprag Clutch 17 x 25 x 12 (FE425) x 1pc

Used for:

- Goblin Kraken

HF3C Rotor Head Uruguay Competition Helicopter SAB Goblin

The 2 blades HF3C rotor head was developed with the aim of providing the best results in F3C style flight.

Changing  the rigidity of the dampening system is possible
H0482-70 ( Damper Yellow 70 Shore)
H0482-80 ( Damper Yellow 80 Shore)
H0482-90 ( Damper Yellow 90 Shore)

This item includes:

•  Main Hub HF3C x 1pc
•  Spindle x 1 pc
•  Main Blades Grip Black Matte x 2pcs
•  Main Blades Grip Arm Black Matte x 2pcs
•  Titanium Main Linkage x 2pcs
•  New Design Swashplate x 1set
•  Damper RED 80°, YELLOW 70°, GREEN 90°
•  Hard wares

This item is designed for:

• Goblin Urukay F3C

This is an SAB official nitro conversion for the Kraken model! The kit is manufactured and supported by SAB and includes everything required to convert your electric Kraken kit to a nitro, this conversion includes all the parts such as the fan shroud, fan, clutch, clutch bell, etc. (Excludes motor and electronics).

Includes:

• Finishing Washer M3 x 18goblin-kraken-words-2.jpg
• Servo Spacer x 2
• Finishing Washer M2,5 x 8
• Servo Blockx 2sab-kraken-nitro-conversion-1-woh.png
• Plastic Ball Link M2 x 2
• Uniball M2 maschio x 2
• Nitro Fan A x 1
• Nitro Fan B x 1
• Motor Support DX x 1
• Motor Support LX x 1
• Shaft YS x 1
• Shaft OS x 1sab-kraken-nitro-conversion-ass-woh.png
• Tank Rubber 50 shore x 4
• Clutch x 1
• Fan x 1
• Clutch Support x 1
• Clutch Bell Flange Black Anodizing x 1
• Z26 Nitro Pulley (black anodizing) x 1
• Nitro Pulley Flange x 1
• Motor Frame Spacer x 4
• Engine support spacer x 2
• SAB Fuel Tank x 1
• Alu Tank Support Right x 1
• Alu Tank Support Left x 1
• CF Servo Gas Support x 1
• CF Accessories Support x 1
• Fuel Clunk x 1
• Fuel Nipple x 1
• Fuel Rubber 60 shore x 1
• Better Fuel Stop x 2
• Carbon Insert M2.5 x 4
• Servo Spacer x 2
• CF Sensor Support (2mm) x 1
• H1073 cut slot x 1
• Landing Gear Space kraken Naked x 4
• Main Frame x 2
• Main Frame Spacer x 1
• Cable Pass x 1
• Servo Horn 25T 6mm x 1
• Grommet x 1
• Socket Head Cap M2,5x6 x 2
• Socket Head Cap M2,5x8 x 4
• Socket Head Cap M2,5x10 x 7
• Socket Head Cap M2,5x15 x 4
• Socket Cap M3 x 6 x 1
• Socket M3 x 8 x 9
• Socket Head Cap M3 x 10 x 11
• Socket M3 x 12 x 6
• Socket M3 x 16 x 4
• Button Cap M3x6 x 4
• Button M4 x 8 x 2
• Button M4 x 10 x 4
• Socket Head Cap M4x10 x 4
• Socket M4 x 15 x 4
• Flat M3 x 8 x 6
• Metric Hex Nuts M2 x 1
• Metric Hex Nylon Nuts M2,5 H3,5 x 4
• Metric Hex Nylon Nuts M3 H4 x 4
• Threaded Rod M2x64 x 1
• Radial bearing 12 x 18 x 4mm x 3
• Belt Gates 339-3GT-013 x 1
• Silicone Tube 2.4 x 5.5 x 600mm shore 60 x 1
• Silicone Tube 2.4 x 4.5 x 85mm shore 50 x 1
• Filter 6 x 13.5 x 15mm x 1
• Te 3.2 x 2

SAB main blades 690tbs x 3

Specifically designed for all Goblin 700 and other helicopters class 700

Thanks to the variable profile, "SAB Thunderbolt Blades" can increase the performance of your helicopter optimizing efficiency and enhancing the maneuverability in all flight styles. The bi-directional carbon structure ensures high rigidity and strength necessary to withstand very high stress generated by modern 3D helicopters. Include safety wire to prevent the throwing of dangerous fragments in case of a crash.

Technical features:

• Length : 690 mm [3 BLADES]
• Width : 56/60 mm
• Root : 12 mm
• Bolt Hole : 5mm

- Plastic Ball Link x 2pcs

- Aluminum Bushing x 2pcs

- Carbon Rod 4 x 2.5 x 1pc

- Threaded Rod M2,5 x 40 x 2pcs

For Goblin RAW 700

- Plastic Carbon Rod Support x 1pc

- Socket Head Cap Screw M2.5 x 12 x 1pc

For Goblin RAW 700

SAB tail blades 105mm x 3

Thanks to the variable chord, the "Thunderbolt Blades" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

    Length: 105 [mm] [3 BLADES]
    Width: 27/30 [mm]
    Root: 5 [mm]
    Bolt Hole: 3 [mm]

Thanks to the variable chord, the "Thunderbolt Blades" tail rotor blades offer a more reactive response to the pilot command. That means that the tail moves more rapidly and can allows faster maneuvers, but at the same time the blades offer a better controllability of the helicopter.
Each helicopter requires the best possible matching combination of main and tail rotor blades.
Therefore, we have designed the perfect tail rotor blades to suit all your needs.
High performance carbon fiber tail rotor blades. The blades are pre-balanced and ready to fly.

Technical features:

Length: 105 [mm]
Width: 27/30 [mm]
Root: 5 [mm]
Bolt Hole: 3 [mm]

- Slant Main Gear x 1set

For Goblin RAW 700/URK Genesis

- Socket Head Cap Screw M3 x 14 x 5pcs

For Goblin RAW 700

- Steel Pinion Out Put x 1pc

For Goblin RAW 700/URK Genesis

- Aluminum Swashplate Reference x 1pc

= Socket Head Cap Screw M3 x 8 x 2pcs

For Goblin RAW 700/URK Genesis

- Aluminum Base Support x 1pc

- Socket Head Cap Scew M3 x 18 x 2pcs

- Steel M3 Washer x 2pcs

For Goblin RAW 700

- Aluminum Top Main Case x 1set

For Goblin RAW 700/URK Genesis

Includes:

• Aluminum Finishing Washer M3 x 1pc
• Plastic Wire Cover x 1pc
• Button Head Cap Screws M2,5x6 x 2pcs
• Socket Head Cap Screws M3 x 8 x 1pc

Used for:

• Goblin Kraken

Heavy Duty Tail Pulley 24T Black Anodized

Content:

• Aluminum Tail Pulley 24T x 1
• DIN 12.9 Cone Point Set Screws M4x4 x 2pcs

Use for:

• Goblin 770/770CO/Urukay/Goblin 700 KSE

Delrin Damperner For HPS2/3 Goblin Urukay/630/700/770/Competition/Speed

Includes:

• CNC Delrin Dampener Type A x 3pcs
• CNC Delrin Dampener Type B x 3pcs
• CNC Delrin Dampener Type C x 3pcs
• Steel Shims Ø10 x Ø16 x 1 x 3pcs
• Steel Shims Ø10 x Ø16 x 0,2 x 3pcs
• O-ring 3050 x 3pcs

Use for:

• Goblin Urukay
• Goblin 630/700/770/Competition/Speed Using New HPS2/3
• Goblin Black Nitro

Plastic Ball Linkage Goblin Urukay / HPS2 / HPS3

Includes:

• Precision Plastic Ball Linkage x 5pcs

Use for:

• Goblin Urukay
• Goblin 630/700/770 Competition/Speed using HPS2/3

NOT COMPATIBLE WITH CODE H0346-S 

Socket Head Cap M3x12 (5pcs) for Goblin 630/700/770

Socket Head Cap M3x16 (5pcs) for Goblin 630/700/770

Includes:

• DIN 12.9 Button Head Cap M2x5 x 5pcs

Use for:

• Goblin 380/420/500/570

Highest grade DIN 12.9 quality screw size
5 x Socket Head Cap Screw M2x5mm for Goblin 380/420/500/570/630/700/770

Highest grade DIN 12.9 quality screw size
5 x Socket Head Cap Screw M2x6mm for Goblin 380/420/500/570/630/700/770

Highest grade DIN 12.9 quality screw size
5 x Socket Head Cap Screw M2x8mm for Goblin 420/500/570/630/700/770

DIN 12.9 Button Head Cap M2x4 (5pcs) for Goblin 500/570

Highest grade DIN 12.9 quality screw size

5 x Socket Head Cap Screw M3x10mm for Goblin 500/570/630/700/770

DIN 12.9 Shouldered Socket Head Cap M3x22 screw, Special (5pcs)

For The SAB Goblin 500/570/630/700/770

Highest grade DIN 12.9 quality screw size

5 x Socket Head Cap Screw M3x6mm for Goblin 500/570/630/700/770

Socket Head Cap M3x22 (5pcs) for Goblin 630/700/770

Highest grade DIN 12.9 quality screw size
5 x Socket Head Cap Screw M3x8mm for Goblin 630/700/770