SAB Raw/Urukay

Includes:

- Aluminum Main Pulley Z60 x 1pc

- Metric Hex Nylon Nuts M4 H5 x 1pcs

- Socket Head Cap Screws M4 x 20 x 1pcs

Use for:

- Goblin Kraken

Includes:

- Aluminum Bushing x 1pc

- Steel Washer 1mm x 2pcs

- Steel Washer 0.2mm x 2pcs

Used for:

- Goblin RAW Nitro

Includes:

• Steel Main Shaft 12mm x 1pc
• Steel Washer 12.1 x 16 x 0.1mm x 2pcs
• Socket Hex Shouder Screw M4x 21.5mm x 1pc

Used for:

• Goblin Kraken

Includes:

- Motor Belt GT3 282 -19mm x 1pc

Used for:

- Goblin Kraken

Includes:

• Aluminum Finishing Washer M3 x 2 pcs
• Aluminum Motor Mount x 1 pcs
• Socket Head Cap Screws M3 x 10 x 2 pcs
• Button Head Cap Screws M4 x 8 x 4 pcs
• Steel Washer 5.3 x 15 x 1 x 2 pcs
• Metric Hex Nylon Nuts M5 H6 x 2 pcs
• Set Screw M5x 16x 2 pcs

Use for:

• Goblin Kraken / Raw

Includes:

- G10 M10 Block Nut x 1pc

- G10 M10 Locking Tool x 1pc

- Steel shim 10 x 16 x 0.2 x 2pcs

- Nylon Bolt M10 x 20 x 3pcs

- Nylon Nut M10 x 3pcs

Used for:

- Goblin Kraken

Includes:

- K Gear Z54 1 x 1pc

- Radial Bearing 17 x 26 x 5 (6803 ZZ) x 2pcs

- Collar 17mm x 1pc

- Sprag Clutch 17 x 25 x 12 (FE425) x 1pc

- Shouder Screw M4x 21.5mm x 1pc

Used for:

- Goblin Kraken

- K Slant Gear x 1pc

- Radial Bearing 17 x 26 x 5 (6803 ZZ) x 2pcs

- Collar 17mm x 1pc

- Sprag Clutch 17 x 25 x 12 (FE425) x 1pc

- Shouder Screw M4x 21.5mm x 1pc

- K Gear Out put x 1pc

Used for:

- Goblin Kraken 700

Includes:

- 80 Shore Orings x 6pcs

Used for:

- Goblin Kraken

Includes:

- 95 Shore Orings x 6pcs

Used for:

- Goblin Kraken

Includes:

- K Gear Slant x 1pc

- Socket Hex Shouder Screw M4x 21.5mm x 1pc

- K Gear Slant Out Put x 1pc

Used for:

- Goblin Kraken 700

Includes :

- Plastic Canopy Anti Vibration x 2pcs

- Socket Screw M3 x 10 x 2pcs

- Steel Washer 3.2 x 7 x 1 x 2pcs

Use for :

- Goblin Urukay

Includes:

- Plastic frame spacer x 8pcs

- Double side tape x 8pcs

Used for:

- Goblin RAW Nitro

ncludes:

- Plastic Landing gear support x 2pcs

- Set screws M4 x 4mm x 4pcs

- Metric Hex Nylon Nuts M3 H4 x 4pcs (already assembled)

Used for:

- Goblin Kraken

Includes:

- Plastic Tail Push Rod Support x 1pc

- Socket Screw M2.5 x 12 x 1pc

Used for:

- Goblin RAW Nitro

Includes:

- Aluminum Pulley HTD 3M - Z27 x 1pc

- Socket Head Cap Screws M2 x 5 x 6pcs (already assembled)

- Set screw M4 x 6 x 1pc

Used for:

- Goblin Kraken

- CF ESC Mount x 1pc

- Flat Scew M2.5 x 2pcs

For Goblin RAW 700

- Canopy Yellow x 1pc

- Yellow Sticker Set x 1

- Hardware Set x 1

For Goblin RAW 700

Sab Goblin RAW canopy Orange color including Sticker #H1427

Includes:

• Canopy orange x 1pc
• orange Sticker Set x 1
• Hardware Set x 1

Used for:

Goblin RAW 700

Sab Goblin RAW canopy Red color including Sticker

Includes:

• Canopy RED x 1pc
• RED Sticker Set x 1
• Hardware Set x 1

Used for:

Goblin RAW 700

Includes:

- Aluuminum Rear Servo Mount x 1pc

- Aluminum Finishing Washer M3 x 2 pcs

- Socket Head Cap Screws M3 x 10 x 2pcs

Use for:

- Goblin Kraken

Includes:

- Set Screw M5 x 16 x 10pcs

Used for:

- Goblin Kraken

Includes:

- Socket Hex Shouder Screw M4x 21.5mm x 8pcs

Used for:

- Goblin Kraken

Includes:

- Steel Elevator Servo Linkage x 3pcs

Used for:

- Goblin Kraken S

Includes:

- Steel Pinion out put shaft x 1pc

- Steel Shims 6 x 9 x 0.2mm x 2pcs

Used for:

- Goblin RAW Nitro

Includes:

• New Steel Spindle Shaft x 2pcs
• Steel Pin 5mm x 2pcs
• Socket Screw M2.5 x 8 x 4pcs
• Socket Screw M6 x 10 x 2pcs
• Steel Washer M6 x 2pcs

Use For:

• Goblin Urukay
• Goblin 630/700/770/Competition/Speed Using HPS2/3

Includes:

- Steel Spindle Shaft x 1pc

- Button Head Cap Screw M6x10mm x 2pcs

- Steel Washer x 2pcs

Used for:

- Goblin RAW Nitro

Includes:

- Steel Tail shaft with Tail hub assembled x 1pc

- Tail Oring x 2pcs

Used for:

- Goblin RAW Nitro

Includes :

- Spherical Bearing 12 x 22 x 7 x 1pc

- Radial Bearing 30 x 37 x 4 x 2pcs

- Swashplate Upper Cup x 1pc

- Swashplate Bottom Cup x 1pc

- Swashplate Base Cup x 1pc

- Button Screw M2 x 5 x 3pcs

- Socket Screw M2 x 8 x 3pcs

- Steel Washer 2,2 x 5 x 0,3 x 3pcs

- Socket Screw M3 x 10 x 1pc

(All already assembled)

- Reference pin x 1pc

- Uniball M3x4 5 H3 x 7pcs

Use for :

- Goblin Kraken

Includes:

- Aluminum Swashplate Reference x 1pc

- Socket Head Cap Screws M3 x 10 x 2pcs

Used for:

- Goblin Kraken

Includes:

• Uniball M3 x 4.5 D5 H3 x 7 pcs
• Reference Pin x 1 pcs
• Swashplate Set assembled x 1pc

Use for:

• Goblin Kraken

Includes:

• Spacer 5 x 9 x 0,75 x 2pcs
• 7075 Aluminum Tail Blades Grip x 2pcs
• Socket Head Cap M2x6 x 2pcs
• Button Cap M4x6 x 2pcs
• Bearing 5 x 10 x 4 (MR105ZZ) x 4pcs (already assembled)
• Thrust bearing 5 x 10 x 4 (F5 - 10M) x 2pcs

Use for:

• Goblin Kraken/Raw

Includes:

- Aluminum Tail Spacer x 1pc

- Socket Head Cap Screws M3 x 8 x 4pcs

Used for:

- Goblin Kraken

Includes:

- Carbon Fiber Tail Fin x 1pc

- Orange sticker x 1 set

- White Sticker x 1 set

- Yellow Sticker x 1 set

- Flat Head cap M3 x10 mm x 2pcs

- Metrix Hex Nylon Nut M3 x 2pcs

Used for:

- Goblin Kraken

Includes:

• Tail Pitch Slider Assembled x 1set
• Steel Grip Link Bushing x 2pcs
• Plastic Tail Linkage x 2pcs
• Socket Head Cap Screws M2x6 x 2pcs

Used for:

• Goblin Kraken