Jeti

Aftermarket Radio sticks protection for Jeti DS transmitters , made in france

Protecting your sticks in transport or from any accidental movement

Gray color

The Central Box 210 is a switchboard designed for the complete management of servos in a model.

The Central Box can manage two batteries and fully supports the JETI EX telemetry system. Up to three receivers with serial output can be connected to the Central Box. With JETI DC/DS transmitter, the full potential of the Central Box can be used, such as an easy way to configure the Central Box, EX telemetry and DITEX servos telemetry.Central Box 210 supports up to 15 servo outputs, two battery inputs and incorporates possibility to connect an RC or magnetic switch.

Support of DITEX telemetry servos

• Possibility to connect up to 3 receivers with serial interface (EX-Bus, PPM)
• Built-in Expander function for up to 3 sensors
• Input for magnetic switch or RC switch
• Two MPX battery input connectors
• 100Hz mode of servo outputs (10ms period)
• Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
• Easy settings changes via DC/DS transmitter
• Firmware updates by user
• Suitable for use with high voltage (HV) servos
• Compact size for easy installation
• Aluminum Case for Extra Cooling and Protection

1. Weight [g] 59
2. Dimensions [mm] 66 x 42 x 18
3. Sustained current [A] 20
4. Peak current (2s) [A] 90
5. Number of channels 15
6. Telemetry Yes
7. Operational temperature [°C] -20 ... 75
8. Compatible protocols EX Bus, PPM
9. Supply Voltage [V] 4 ... 14
10. Satellite receiver support Yes
11. Batteries NiXX 4 ... 10
12. Batteries LiXX 2 ... 3
13. Idle current [ľA] 180
14. Number of battery inputs 2
15. Voltage stabilization No

Jeti AC adapter for charging the Jeti transmitter

The Jeti Model AFC 150 amps. connectors eliminate the flashes often witnessed when connecting controllers and battery packs. Size of 5.5mm the female plug sports a SMD resistor that does away with the usual flashed that occur during connection and that can harm the surface of both the male and female plug. The sets contain two male connectors, a usual female and an AFC female connector together with red and black shrink wrap.

Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark

Maximum current 150 amps.

Anti Spark connectors are designed for connection between drive battery and electric motor controller. These connectors are equipped with a circuit to limit the charging current to the capacitors of the controller and thus prevent electrical discharge when connected. By eliminating the occurrence of an electric shock, the service life of the connector in terms of the number of connections and consequently the reliability of the connection is significantly increased. Anti Spark connectors are further characterized by low transient resistance and especially by their ease of use.

 Diameter of connector is 7mm. 2 Pairs

Jeti Altimeter-EX for Duplex 2,4GHz System

MAlti EX is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above sea level and relative altitude above the ground. The sensor also alerts you if any alarm setting is exceeded.
The sensor data can also be transmitted via the Duplex system to the user.

The Duplex system takes advantage of the 2.4GHz band for communication. This system not only transmits control data to the model but also sends data from the model back to the transmitter. The telemetry data collected during operation is shown as actual, measured values in real time on either LCD screen of a connected JETIBOX or on the DC/DS JETI model transmitters.

Main features:

• Measurement of altitude, pressure, and temperature.
• Possible sound alarm signaling using a JETI Tx module (EU only) or JETIBOX profi.
• The device is compatible with EX Bus protocol, i.e. it is possible to be configured comfortably via a special menu in DC/DS JETI model transmitters.
• Firmware updates.

MAlti Technical data:

• Resolution of measured height 0.1m
• Measurement range 300÷1100hPa

Specification:

• Weight [g]     4
• Dimensions [mm]     28 x 16 x 5
• Operational temperature [°C]     -10 > 85
• Supply Voltage [V]     3.5 > 8,4
• Average Current [mA]     15

Jeti Aluminum stick tops for JETI transmitter tray black - red

(Without hopper / base)

Patch cable, both sides with plug suitable for DuplexTU 4x 0.15
This patch cable is ideal for connecting the original RF module and the Duplex TU module.

Jeti Central Box 400 with magnetic key

The Central Box 400 is a switchboard designed for the complete management of servos in large to giant models with an emphasis on safety. The Central Box 400 has a unique design that provides overload protection at each servo output. An independent, very powerful BEC (battery eliminator circuit) for each battery input makes the Central Box an optimal solution to connect up to 24 servos. The Central Box 400 can manage the batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus, UDI) output can be connected to the Central Box 400. With a JETI DC/DS transmitter, the full potential of the Central Box can be used, such as easy configuration of the Central Box, EX telemetry, and very fast servo response.

Central Box 400 supports up to 24 protected servo outputs, two battery inputs with voltage regulators and incorporates  possibility to connect an RC or magnetic switch.

Attributes:

• Two independent high-powered BEC´s for voltage stabilization of servos
• Overload protection on each channel
• Overload protection on Rx, Ext, and Switch outputs
• Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus, UDI)
• Built-in Expander function for up to 4 sensors
• Input for magnetic switch or RC switch
• MPX battery input connectors: 2x
• Stabilized voltage output via a pair of MPX connectors
• 100Hz mode of servo outputs (10ms period)
• Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
• Easy settings changes via DC/DS transmitter
• Internal memory for storage of telemetry data
• USB connectivity for connection to PC
• Easy settings changes via DC/DS transmitter
• Firmware updatable
• Suitable for use with high voltage (HV) servos
• Robust metal construction with mounting holes
• LED status indication
• Each output is individually configurable (channel assignment, trim, reverse, ATV)

Specication:

• Weight [g]     270
• Dimensions [mm]     131 x 88 x 19
• Sustained current [A]     30
• Number of channels     32
• Telemetry     Yes
• Operational temperature [°C]     -20 ... 75
• Compatible protocols     EX Bus, PPM
• Supply Voltage [V]     6 ... 17
• Satellite receiver support     Yes
• Batteries NiXX     6 ... 12
• Batteries LiXX     2 ... 4
• Voltage BEC [V]     5 ... 8
• Idle current [µA]     60
• Number of battery inputs     2
• Voltage stabilization     Yes
• Peak current (2s) [A]     230

Jeti Central Box 400 with two satellite receivers Rsat 2 and with RC Switch

The Central Box 400 is a switchboard designed for the complete management of servos in large to giant models with an emphasis on safety. The Central Box 400 has a unique design that provides overload protection at each servo output. An independent, very powerful BEC (battery eliminator circuit) for each battery input makes the Central Box an optimal solution to connect up to 24 servos. The Central Box 400 can manage the batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus, UDI) output can be connected to the Central Box 400. With a JETI DC/DS transmitter, the full potential of the Central Box can be used, such as easy configuration of the Central Box, EX telemetry, and very fast servo response.

Central Box 400 supports up to 24 protected servo outputs, two battery inputs with voltage regulators and incorporates  possibility to connect an RC or magnetic switch.

Attributes:

• Two independent high-powered BEC´s for voltage stabilization of servos
• Overload protection on each channel
• Overload protection on Rx, Ext, and Switch outputs
• Possibility to connect up to 2 receivers with serial interface (PPM, EX Bus, UDI)
• Built-in Expander function for up to 4 sensors
• Input for magnetic switch or RC switch
• MPX battery input connectors: 2x
• Stabilized voltage output via a pair of MPX connectors
• 100Hz mode of servo outputs (10ms period)
• Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
• Easy settings changes via DC/DS transmitter
• Internal memory for storage of telemetry data
• USB connectivity for connection to PC
• Easy settings changes via DC/DS transmitter
• Firmware updatable
• Suitable for use with high voltage (HV) servos
• Robust metal construction with mounting holes
• LED status indication
• Each output is individually configurable (channel assignment, trim, reverse, ATV)

Specication:

• Weight [g]     270
• Dimensions [mm]     131 x 88 x 19
• Sustained current [A]     30
• Number of channels     32
• Telemetry     Yes
• Operational temperature [°C]     -20 ... 75
• Compatible protocols     EX Bus, PPM
• Supply Voltage [V]     6 ... 17
• Satellite receiver support     Yes
• Batteries NiXX     6 ... 12
• Batteries LiXX     2 ... 4
• Voltage BEC [V]     5 ... 8
• Idle current [µA]     60
• Number of battery inputs     2
• Voltage stabilization     Yes
• Peak current (2s) [A]     230

Charger adapter DC-16 For Auto

Jeti DUPLEX 2,4EX 4-point adjustable Harness

For tray of the DC-16 transmitter or consoles from other manufacturers. It is a so-called cross strap and allows to carry the transmitter over long flight times. The Jeti Duplex Harness is equipped with soft cushions in the neck area. High quality embroidered logos duplex.

Jeti DC - Replacement Switch 1-Spring-DOWN 3-Position

Jeti DC / DS TDx MSW Expansion Module

Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line RED

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line RED

Tray variant of the top-class RC transmitter of JETI model.
The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Features:

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Specifications:

• Weight [g]     1500
• Dimensions [mm]     230 x 270 x 40
• Power Output [mW]     100
• Number of channels     14
• Number of controls     20
• Resolution     4096 steps
• Telemetry     Yes
• Operational temperature [°C]     -10 ... 60
• Operating time [h]     11
• Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

Included:

• JETI DC-16 Transmitter
• Receiver Duplex DR9EX
• Wall Power Supply 110-230V
• JETI DC-16 Transmitter Aluminum Case
• USB PC Cable
• Installation Hex Key Set (1,5mm; 2mm)
• Cleaning Cloth
• Instruction Manuals

Jeti DC-24 transmitter tray carboxylic line dark orange Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap
• REX10A
  
• RSAT-900Mhz

Jeti DC-24 transmitter tray carboxylic line dark red Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray carboxylic line light blue Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray carboxylic line Multimodee

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti DC-24 transmitter tray Multimode

Hardware:

• Clear, timeless form
• Precision production in the EU
• Metal housing
• Versatile adjustable joystick
• Trouble-free installation of stick switches
• Fast, precise stick reactions
• Backlit display
• Color display even in direct sunlight easy to read
• Mechanically protected antenna positioning
• Durable LiIon battery for long term use and low self-discharge
• Integrated charging electronics for the transmitter battery
• Charging option via USB
• Headphone connector
• built-in microphone
• 2 HF modules 2.4GHz
• 4 antennas
• 1 RF module 900 MHz
• USB connectivity to a computer
• Data storage
• Internal PPM
• In / out slot
• Approximately Wireless internal structure
• FM Radio
• Vibrating alert

Software:

• Up to 24 channels proportional
• Digital trims
• Minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
• Time display
• Speech output for alarms and telemetry values
• Clear display of Channel Set
• Simple and logical programming
• mMltilingual
• Audio Player (MP3)

Telemetry:

• Display of telemetry data on the screen in real time
• Recording of telemetry data
• Bidirectional communication via EX protocol and EX bus
• Graphical representation of the telemetry data directly on the display
• Telemetry transmitter

Set contains:

• DC-24
• Alu case
• 900 MHz R.sub.sat
• Power supply
• USB cable
• Cross strap

Jeti Digital Servo High voltage & torque DSHV 3D13T (13kg)

The J3D13T is a precise full-metal digital servo for large models. "Mini" size.

• High torque and speed
• High voltage
• Precision metal gearbox
• Ball bearings
• Watter proof
• Aluminium case

Specification:

• Weight [g]     39,7
• Supply Voltage [V]     3.8 > 8.4
• Torque (6V) [kg/cm]     10.5
• Torque (7.4V) [kg/cm]     13
• Torque (8.2V) [kg/cm]     14
• Speed (6V) [s]     0.17
• Speed (7.4V) [s]     0.14
• Speed (8.2V) [s]     0.13
• Max. current (7.4V) [A]     2.4
• Motor     Coreless DC
• Waterproof     Yes
• Ball bearings     2
• Gearbox material     metal
• Compatible horn (Ø6mm)     Futaba

Jeti Digital Servo High voltage DSHV 4A18.5T (18.5kg)

The J4A18.5T is a precise full-metal digital servo for large models. Standard size.

• High torque and speed
• High voltage
• Precision metal gearbox
• Ball bearings
• Watter proof
• Aluminium case

Specification:

• Weight [g]     74
• Supply Voltage [V]     4.8 > 8.4
• Torque (6V) [kg/cm]     15
• Torque (7.4V) [kg/cm]     18.5
• Torque (8.2V) [kg/cm]     20.5
• Speed (6V) [s]     0.10
• Speed (7.4V) [s]     0.08
• Speed (8.2V) [s]     0.07
• Max. current (7.4V) [A]     5.8
• Motor     BLCD
• Waterproof     Yes
• Ball bearings     2
• Gearbox material     metal
• Compatible horn (Ø6mm)     Futaba

Jeti Digital Servo High voltage HV DSHV 3D8.5T (8.5kg)

The J3D8.5T is a precise full-metal digital servo for large models. "Mini" size

• High torque and speed
• High voltage
• Precision metal gearbox
• Ball bearings
• Watter proof
• Aluminium case

Specification:

• Weight [g]     39,7
• Supply Voltage [V]     3.8 > 8.4
• Torque (6V) [kg/cm]     6.9
• Torque (7.4V) [kg/cm]     8.5
• Torque (8.2V) [kg/cm]     9.5
• Speed (6V) [s]     0.12
• Speed (7.4V) [s]     0.10
• Speed (8.2V) [s]     0.09
• Max. current (7.4V) [A]     2.4
• Motor     Coreless DC
• Waterproof     Yes
• Ball bearings     2
• Gearbox material     metal
• Compatible horn (Ø6mm)     Futaba

Jeti Digital Servo High voltage HV DSHV 4A23T (23kg)

The J4A23T is a precise full-metal digital servo for large models. Standard size.

• High torque and speed
• High voltage
• Precision metal gearbox
• Ball bearings
• Watter proof
• Aluminium case

Specification:

• Weight [g]     74
• Supply Voltage [V]     4.8 > 8.4
• Torque (6V) [kg/cm]     18.5
• Torque (7.4V) [kg/cm]     23
• Torque (8.2V) [kg/cm]     25
• Speed (6V) [s]     0.15
• Speed (7.4V) [s]     0.12
• Speed (8.2V) [s]     0.11
• Max. current (7.4V) [A]     5.8
• Motor     BLCD
• Waterproof     Yes
• Ball bearings     2
• Gearbox material     metal
• Compatible horn (Ø6mm)     Futaba

Jeti DS-12 hand transmitter multimode Yellow

Reserve the new Jeti Duplex DS-12 transmitter already! Once the station is available, we deliver him from the orders in the chronological order.

The new hand-transmitter by JETI offers the high-quality design in an elegant plastic housing, a large color screen and ball-bearing stick units and non-wearing Hall sensors .
The extremely light weight of about 700g and the unique ergonomics of this transmitter can model the heart beat faster.
Integrated is of course the excellent telemetry system by JETI, can be used with which the transmitter programmed on personal preferences!

Specifications:

• Channels: 8 (up to 12 expandable)
• 2.4GHz RF modules: 1
• 900MHz backup system: Optional
• Color TFT: 3.5 inch, 320x240 pixels
• Stick units with Hall sensors: Yes
• Resolution stick: 4096
• Internal memory: SD card, 8GB
• Free mixers: 5 (up to 20 expandable)
• Stopwatches: 3 (up to 20 expandable)
• Values ​​displayed on the display: 10 (up to 40 expandable)
• Spachausgabe for functions: 5 (up to 20 expandable)
• Alarms: 10 (up to 40 expandable)
• Channels for gyroscopic axes: 1 (up to 3 expandable)
• Phases of flight: 3 (up to 6 expandable)
• Flight phase trims: Yes
• DITEX telemetry values: 16
• Lua extensions: max. 10
• MP3 player: Yes
• Microphone: Yes

Optional equipment:

• Logical switches: 0 (up to 16 expandable)
• Sequencer: 0 (up to 6 expandable)
• Motion sensor: optional
• Audio Player: optional
• Telemetry transmitter: 0 (up to 16 expandable)
• Vibrate: optional
• Speech: optional
• Power Balancer: optional
• Function curves: optional
• Gas Limiter: optional
• Variometer: optional

Jeti DS16 carbonline, Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• Jeti Duplex DS-16 Transmitter
• 9CH receiver
  
• Jeti Transmitter Neck Strap
• Jeti Transmitter Aluminum Case
• 110-230V Wall Power charger
• Tx Battery Li-poly 3200mAh 3.7V (1S2P)
• Mini USB to USB PC Cable
• Instruction book

Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4 RED edition

Jeti DS16 carbonline, Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features

State-of-the-art, upgradable firmware which gives you full freedom and complete control.
Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
Mini USB port for firmware upgrades and PC download of telemetry data.
Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
9-point, programmable curve mixes for all 16 digital proportional channels.
You can set up not just dual, but triple rates.
Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
Unlimited use of the on-board 2GB SD card memory.
Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• Jeti Duplex DS-16 Transmitter
• 9CH receiver
• Jeti Transmitter Neck Strap
• Jeti Transmitter Aluminum Case
• 110-230V Wall Power charger
• Tx Battery Li-poly 3200mAh 3.7V (1S2P)
• Mini USB to USB PC Cable
• Instruction book

Jeti DS-24 hand-held transmitter

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti DS-24 transmitter carboxylic line

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti DSM10 Dual switch Mixer

DSM 10 is an electronic switch for switching of two receiver batteries which are connected to one receiver.
The product also includes a receiver current supply switch.
Batteries that are connected to the inputs of the DSM 10 are permanently measured and connected with the aid of a hysteresis comparator either both to the output, or one of both batteries with the higher voltage only.
The DSM 10 exit consists of a MPX connector which can be used for direct connection of the exit to the receiver.
The MPX connector is a fixed part of Duplex receivers with the label EPC (External Power Connector), receivers R14 and R18.

The DSM 10 is not equipped with a voltage stabilizing circuit for the connected batteries.
The voltage at the DSM 10 output will always be equal to the voltage of the connected battery with the higher voltage.
Make sure that receiver, servos and other equippment supplied by the DSM 10 are designed for the given voltage.
The DSM 10 is controlled by a magnetic switch which can be placed outside of the model airplane fuselage.
By touching with a special magnet, the system becomes switched on or off.
The electronic switch in switched on state is characterized by a minimum transitional resistance.

Jeti transmitter DS-24 carboxylic line dark orange

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Features

• 24 full control channels
• 3 HF modules (2x 2.4Ghz, 1x 900MHz optional)
• color display
• 4 types of models (surface / helicopter / multicopter / functional model)
• MP3 player
• Telemetry processes up to 64 sensor values
• Voice input commands optional

Transmitter hardware

Multimode joystick

• Determination of stick positions using Hall sensors (without potentiometer)
• Control path resolution 4096 steps
• color display, backlit
• rotating stick aggregate
• Fully aluminum joysticks / aggregates, adjustable in length, with ball bearings
• internal storage
• integrated LiIon battery for long operating time
• Charger
• Aluminum transport case
• Speech
• headphone jack
• digital trims
• anodized aluminum housing

Transmitter software

• 2.4 GHz DUPLEX EX
• 24 control channels
• customizable menu navigation
• almost unlimited setting options
• almost unlimited number of model memories
• Firmware update via USB
• ultra-fast control reactions
• Power management system for longer operating times
• PC interface
• 4 adjustable model types (airplane / helicopter / functional model; multicopter)
• 8 languages (EN / DE / CZ / FR / IT / PT / SE)

Telemetry functions

• Voice output of telemetry warnings and telemetry values
• Display of telemetry data in real time on the transmitter display
• Record telemetry data
• PC transmission, storage and processing of telemetry values??
• Saving (backup) the model data and transmitter settings on the PC

Delivery contents

JETI handheld transmitter DS-16 II Carbon Line Red Multimode (delivery state mode 2, control mode very easy to change), receiver REX 10, transmitter battery installed, charger for transmitter battery, strap and stable carrying case.