Jeti

 Replacement battery 3200 mAh for JETI DC/DS-16.

Jeti Transmitter Brackets (Holder TX) DC-16/DS-16

Jeti transmitter DS-24 carboxylic dark blue line

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti transmitter DS-24 carboxylic dark line dark green

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti transmitter DS-24 carboxylic line dark red

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti Transmitter Replacement Momentary Button Switch DC

Jeti Transmitter Replacement Momentary Button Switch DS

Jeti Transmitter Stick Ends DC 23mm M4 (2)

Fits DC-DS- 14/16

Jeti Transmitter Stick for DC/DS-16 & DS-14 - 2 position switch

Jeti Transmitter Stick for DC/DS-16 & DS-14 - 3 position switch

Jeti Transmitter Stick for DC/DS-16 & DS-14 - potentiometer

Jeti Tray for DC-16

NOTE:
Transmitter NOT included

Transmitter tray made of blue acrylic for transmitters DC-16

Ensures ergonomic and effortless control in conjunction with JETI DUPLEX 2.4EX harness (item no. J80001511) even during long flight durations. Both, the DC-16 transmitter and the tray fit inside the carrying case of the DC-16. The clamps are foldable.

Jeti Trim nut black for JETI transmitter DC-24

Matching with the switches on the top of the JETI transmitter tray DC-24

• H: 4,8mm
• D: 9,7mm

Contents:
Pack of 2

Jeti Trim nut black for JETI transmitter DS-24

Matching with the switches on the top of the JETI transmitter DS-24

• H: 4,8mm
• D: 9,7mm

Contents:
Pack of 2

Jeti Trim nut black for JETI transmitter tray DC-14/16 FRONT panel

Matching with the switches on the top of the JETI transmitter tray DC-16

• H: 5,45mm
• D: 10,75mm

Pack of 2

Jeti trim nut silver for JETI Hand transmitter DS-16

Matching with the switches on the top of the JETI transmitter DC-16

• H: 6,2mm
• D: 9,7mm

Contents:
Pack of 2

Jeti trim nut silver for JETI transmitter DC-16

Jeti trim nut silver for JETI Hand transmitter DS-16

Matching with the switches on the top of the JETI transmitter DC-16

• H: 6,2mm
• D: 9,7mm

Contents:
Pack of 2

Jeti trim nut silver for JETI transmitter DS-16

Matching with the switches on the top of the JETI transmitter tray DS-16

• H: 6,2mm
• D: 9,7mm

Contents:
Pack of 2

Jeti Tx Switch nut spanner

Jeti Universal Magnet Switch

Jeti Universal Switch 6A opto

The switch SP 06 opto has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships, and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by  a LED.

Specification:
 

• Weight [g]: 9
• Dimensions [mm]: 27 x 15 x 5
• Sustained current [A]:   6
• Peak current (max 30s) [A]: 10
• Telemetry: No
• Operational temperature [°C]: -10 ... 70
• Recommended input voltage [V]: 3,5 ... 16
• Input voltage max. [V]:   16

Jeti Vario-EX 2 rev.2 for duplex 2.4GHz System

The Vario2 used to measure the rate of descent and ascent and to measure the relative height.

The module stores the maximum rise and sink rate.
The signaling via increase or decrease of the model is output from the built-in transmitter RF module, and displayed on the connected to the transmitter module Jetibox.

In conjunction with a jeti stations not only multiple alarm values ​​can be output, it can also be controlled "commands" such as the switching off or on a landing light when temperature drops below a set minimum flight altitude.

 Measurement of air pressure, temperature

•  Fast and accurate detection of climb or descent
•  audible alarms for duplex transmission modules or JETIBOX professional
•  Use as an expander for other EX-bus sensors
•  In conjunction with MSPEED EXSensor adjustable compensation
•  Motor off function when reaching preset heights (FAI F5J.....)
•  EX-Bus compatible, easy setting in the device list in the transmitter Jeti
•  Possibility updates with UDB Adapter

Technical specifications:

• Dimensions mm     35x16x7
• Weight g     5
• Operating voltage V     3.5 to 8.4
• Current consumption mA     15

The Jeti Max BEC 2 is a linear voltage regulator offering two power inputs for two 2S lithium polymer batteries or 6S NiXX, with a maximum output of 20 amps, a sustained output of 12 amps and a weight of 85 grams. The linear voltage regulation provided by this unit does not contribute to radio interference.

Max BEC 2 can be supplied either by NiCd/NiMH or Li-Po/LiFe cells. This unit is better suited to 2S Li-Poly cells or 5-6 NiMH cells. The input voltage is indicated by four LEDs. If the input voltage is above 7V, all three green LEDs are ON. While the cells are gradually discharging, particular LEDs go OFF depending on input voltage (lower then 7V, 6.7V, 6.45V). If the input voltage is under 6.5V, the red LED goes ON indicating that cells are discharged (if using a 2S Li-Poly this means that the voltage of each cell is below 3.25V per cell).

For best results, ensure that the all BECs are installed at least 2" (50mm) away from your receiver and antenna.

Manufacturer Jeti Model

• Type Linear Regulator w/Switch
• Max Input Voltage 16V
• Min Input Voltage 5.5V
• Output Voltage 5, 5.4, 5.7, 6V Adjustable
• Output Current 12A Continues/20A Peak
• Dimensions 100mm x 29mm x 16mm
• Weight 85g
• Max #Servos 8-10 Analog, 6-8 Digital
• Connector Multiplex
• Applications Airplanes/Helicopters

The Jeti Max BEC 2D Plus EX is the latest linear voltage regulator from Jeti, produced to very high standards in Europe. The Max BEC 2D Plus features a magnetic switch, so there is no mechanical wear-and-tear from switching the unit on and off. The unit also has a large heat-sink to dissipate heat.

For the first time ever, your models receiver system can be turned ON/OFF with a simple flip of the switch, wirelessly from the Jeti DC/DS transmitters. The R3/RSW receiver fully replaces Jetis Magnetic Switch which is widely used with Jeti Voltage Regulators as well as their Electronic Switches. Simply cut off the existing switch, install a Male JR type connector and plug it to the #3 port of the R3/RSW receiver.

In addition to its magnetic switch feature, the 2D is programmable using the Jeti Box and is also Duplex 2.4EX compatible, allowing audible alarms to be configured for low input voltage or high-temperature and allowing real-time feedback of input voltage and temperature, as well as output voltage selection, wirelessly from the Jeti Box.

Redundant inputs are provided for power-supply and the output features an MPX type socket, directly supporting the Duplex R12, R14, R18 receivers and all Duplex EPC receivers. The maximum burst output is 20A. The recommended input power is 5.5-8.4V, e.g. two-cell lithium polymer batteries or 5-6 nickel-based cells. You may also use 2-cell LiFe battery pack.

Screws and mounting-lugs are included to mount the device in your model as well as the magnetic key and face-plate. Decals are also included to allow the informative cover of the unit to be replicated on the outside of your model.

For best results, ensure that the all BECs are installed at least 2" (50mm) away from your receiver and antenna.nt endurance

Specifications

Manufacturer: Jeti Model
Type: Linear Regulator
Max Input Voltage: 16V
Min Input Voltage: 5.5V
Output Voltage: 5, 5.4, 5.7, 6V Adjustable
Output Current: 12A Continues/20A Peak
Dimensions: 100mm x 29mm x 16mm
Weight: 85g
Max #Servos: 8-10 Analog, 6-8 Digital
Connector: Multiplex
Applications: Airplanes/Helicopters

MULi 6S EX is  a sensor for checking voltage of Li-XX batteries that checks the voltage by service connector of every single cell. It allows you to check the voltage up to 6 Li-XX cells.
You can check voltage of every single cell, store its history (maximum, minimum), total voltage of the whole battery, and the sensor can also give notice of exceeding selected parameters. Data from the sensor are transferred via DUPLEX system.

• Weight     6g
• Dimensions [mm]    36 x 20 x 5
• Operational temperature [°C]    -10 ... 85
• Supply Voltage [V]    3,5 ... 8,4
• Average Current [mA]    9
• Range of measured voltage [V]    0 ... 4,4

Jeti wind and weather protection for Jeti DC Transmitter

NOTE:
Transmitter NOT included

JetiBox Mini Radio Control System.

The JETIBOX mini is used for data readout and parameter adjustment of hooked up equipment.

Due to small size it can be Easily mounted to the transmitter and its CLEARLY Arranged backlit display Enables

excellent readability at any weather coditions. Equipment designated by the JETIBOX COMPATIBLE label is JETIBOX mini compatible as well.

Module MVario is used for measuring the size of climb, descent, and the relative height.
The measurement provides a sensitive sensor of barometric pressure.
Range of the sensor is a 100 - 1100 mBar.
Module MVario records the maximum height, maximum climb and descent of the model.
For display of measured values is used JETIBOX terminal with the possibility of wireless transmission of information in real time using the DUPLEX 2,4 GHz system.
The connection a MVario module and DUPLEX 2,4 GHz system makes possible setting alarm for the climb and descent of the model in four steps.
The range of these steps can be set directly in m/s.

JETIBOX MVario Duplex 2,4 GHz Measure sensors

The measurement provides a sensitive sensor of barometric pressure. Range of the sensor is a 100 - 1100 mBar. Module MVario records the maximum height, maximum climb and descent of the model. For display of measured values is used JETIBOX terminal with the possibility of wireless transmission of information in real time using the DUPLEX 2,4 GHz system. The connection a MVario module and DUPLEX 2,4 GHz system makes possible setting alarm for the climb and descent of the model in four steps. The range of these steps can be set directly in m/s.

Spcification:

• Weight: 6g
• Measures: 20×11×5mm
• Voltage: 3,5-8,4V
• Current drain: 6mA
• Functional temperature: -10-85°C
• Measuring accuracy of absolute/relative altitude: ±9m /±3m

 

JETIBOX is a universal communication terminal, which can be used with any JETI products that are marked JETIBOX Compatible. JETIBOX Compatible products use powerful software to allow easy setup and reading of data using a simple menu driven display on the JETIBOX terminal.

There are now a number of JETI model JBC products for use with the JETIBOX, which due to its features and simplicity is gaining a large number of supporters around the world, and this support in turn is creating demand for an even greater range of JETI model JBC products.
JETIBOX operates as a two–way terminal, showing all data stored in the JBC product. With the use of four buttons, the user can browse the menu and set the selected values to take advantage of the full capability of JBC products.

 It is currently possible with the use of the JETIBOX to program controllers in the SPIN series; the CAR Sensor 3000; REX JBC receivers, and the new transmitter modules, receivers and all accessories in the DUPLEX system. With the JETIBOX connected to DUPLEX transmitter modules, it is possible to have continuous wireless communication with any JETIBOX compatible device in the model.

The JETIBOX may be used on its own for:

•   Measuring the pulse width from the receiver – displaying the pulse width in milliseconds along with the receiver voltage
•   Pulse generation – this feature is useful for initial servo setup in the model, without the need to use transmitters and receivers
•   Servo cycling – this can be used to check the operation and reliability of servos
•   Servo speed measurement – the time taken for the servo to move from one position to another.

Switch caps for JETI Transmitters - BLUE (1x short + 1x long)

Specification:

• Fitting all JETI Transmitters
• Anti-slide-switch caps
• Material: silicone

Contains:

• 1 short switch cap
• 1 long switch cap