Generic Upgrades

Landing Skid Nut Red 9-10mm, 600-800 Size Heli

Landing Skid Nut, set of 4 PCS

Direct replacement for Standard Logo 700 Pitch Rod Set.

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment. m3

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment everytime and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustbale linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, option of: 46 or 64mm

Stainless steel control ball with M3 thread 4MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 4mm
Supplied in a pack of 5 pieces

Stainless steel control ball with M3 thread 6MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 4 mm
Supplied in a pack of 5 pieces

Stainless steel control ball with M3 thread 8MM long, and 2.0mm internal hexagon drive.
Ball centre to mounting face distance = 6/8mm
Supplied in a pack of 5 pieces

Full cnc Metal compensator Arms for MS Stinger/iKARUS Viper

Metal Pushrod Heavy Duty with Ball link CNC

Ball link is 31mm long

Thread M3

Rod is 65.5mm long

Set of 1 rod+2 Ball links

Metal tail boom Fin/ Boom support Assembly 21mm diameter

fits all Helicopters with 21mm boom diameter

Adapter plate for Normal servo to fit Small size Micro servo to reduce weight.

Material: High Precision Tolerance CNC Part made with Aluminum 7075T6

High Quality Hardware class 12.9

Including:
1 x cnc micro throttle servo support
4 x hex cup screw M2.5X8
4 x hex cup screw M2X5
4x M2 washer

Set of needle levers for ALL engines such as OS engines .With those levers it will be easier to adjust the engines by remembering visual position

Set comes with 2 levers and screws supplied.

Color can be Silver, Red,Blue (Your choice)

Lynx Heli Innovations always follows new needs and trends.

Nitro is back. Lynx is working on different Nitro expert designs and manufacturing special shaped Carburetor Needle levers that help on Tuning.

Special Shape for easy finger grip. Blue and Red colors for easy management of Max and Medium Needles.

This Lever can work on all Heli Nitro Engine (OS, YS, Novarossi) for helping on the tuning of fine mixing.

Precise CNC Operation to assure tolerance and finish.

Special dimension to assure 360 deg rotation on YS Carburetor.

PACKAGE LIST:

1 x Heli Engine Carburetor Needle Lever RED Color

1 x Heli Engine Carburetor Needle Lever BLUE Color

Spring steel Piano (Music) wire, Straight, Great for making landing gear, cabin struts, and so much more!
Bend to desired shape , Cut to desired length . Great for scratch builders, modelers, crafts, machine shops, and
architectural applications.
Wires are individually packaged in clear plastic tubes and bar coded for ease of sale.

Supplied in Length of 1meter, in sizes from 0.8mm - 2.5mm (Choice)

NEW - NEON COLOURED !!

Made from the same low friction polymer resin as our regular "Rocket" ball links but now in high visibility neon orange, green and yellow.
Suitable for use on 2.0 & 3 mm pushrods but EASILY can be re-drilled to suit up to a 3mm thread if required.

Norlam Standard length shank measuring 22mm from ball centre to the end and are suitable for fitting to 3/16" (4.76mm) control balls.

Shorter are 14mm* good for Servos for tail and other short applications

Available in standard or short body versions.

Supplied in packs of 10

Heavy duty machined alloy servo disc set specifically for the ROBAN 700/800 class mechanics.

20mm diameter with multiple M2 fixing holes at 8mm from centre to provide ideal geometry.

Pack of 3 (Futaba / Align Fitting)

Rocket neon Double ball Links , perfect for airplanes,helicoptes, cars.
6 pieces in a set

Rubber Canopy Grommets 10mm x 5mm, m3 mounting Hole- THIS model fits All helis

Diameter is 10mm

Total thickness of grommet 5mm

Hole M3

set of 4

Rubber grommet 8mm inner diameter for Fuel line

OD is 15mm

ID is 8mm ( perfect for any fuel line or wires installation in the frame)

10 pcs in a bag

RX Antenna support flat mounting black

RX Antenna support for tailboom diameter from 20-30mm

Self Clamping Main Shaft CNC Collar fit shafts of 10mm,

this collar is self clamping, with M3 screw to insure perfect fit. Upgrade for most helicopters with 10MM shaft

Set of 2pcs with hardware

Servo Lever Carbon fiber arm 20mm Type A for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 1g he is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of the servo lever be 1.5 mm, so it is possible to screw a screw M2 readily.

Servo Lever Carbon fiber arm 38mm Type A for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 2.4 g it is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of servo arms are 2.6 mm, it is readily possible to screw a screw M3.

Servo Lever Carbon fiber arm 38mm Type B for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 2.4 g it is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of servo arms are 2.6 mm, it is readily possible to screw a screw M3.

Stainless steel ball Head 4.7mm diameter 4mm tread length 8mm Joint Ball (4pcs)

Specifications:

• Ball is 4.7mm+-
• Length of the ball head( without the ball ) is 8mm
• Length of tread 4mm
• Tread M3
• Material- Hardened steel

Replacement Stainless steel Pushrod 2.5x25mm, 1 pcs

This pushrod is produced with rolled thread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x50mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod 2.5x35mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x60mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 2.5x65mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x20mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x30mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x40mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.

Replacement Stainless steel Pushrod control rod 3x45mm, 1 pcs

This pushrod is produced with rolled tread , therefore its much stronger compared to cut tread.