Futaba

Futaba R304SB 4ch Rx with Telemetry T-FHSS (S-Bus) (HV) 2.4GHz

The R304SB is a compact little 4 channel receiver using T-FHSS telemetry.
Suitable for HV applications the R304SB has an operating voltage range of 3.6 up to 8.4v.

T-FHSS is a variation of Futaba's FHSS technology with the added bonus of telemetry.
As standard the receiver will monitor its own voltage and transmit that back to your T-FHSS transmitter.
There is also a S.Bus2 port included allowing you to plug in additional futaba telemetry sensors.

Specifications:

• Compact size
• T-FHSS telemetry
• Operating voltage of 3.6 - 8.4v
• Weighs only 6.7g!

Futaba R3206SBM 6-Channel T-FHSS-Air-Mono Micro Indoor Receiver

The Futaba R3206SBM is Futaba's smallest receiver to date. It can be installed in two ways, you can use S-BUS for a direct link to drone controllers or using PWM with up to 6 channels. The R3206SBM uses T-FHSS Air-mono system without the telemetry capability. This opens Futaba users to a new world of micro RC models from indoor aircraft to micro racing drones.

To keep the weight down this receiver does not have plugs and it requires fine soldering to install. This is done by you to match your model. Once installed in you chosen model you will need to use heatshrink to finish.

Specifications:

• Approximately 1 gram in weight!
• Ultra compact for micro models
• Uses the T-FHSS AIR-mono system (no telemetry)
• Wide 3.2 to 8.4V (HV) voltage range
• Battery Failsafe Voltage (Set from transmitter)

The R6303SB has an S.BUS system output port and 3 conventional system channel outputs. It can also be used with conventional system servos, etc. in addition to S.BUS system compatible servos and gyros, etc. When the linking procedure is performed, R6303SB recognizes the signal mode (FASST2.4GHz 7ch mode or 8ch/10ch/Multi-ch mode) automatically.

The R6303SB can change the output CH from seven groups (CH group table). In addition, the operating mode (high speed mode/normal mode) can be selected.
 

• FASST-2.4GHz (7ch/8ch/10ch/Multi-ch) system
• S.BUS port and 3 channels for conventional system
• High-Speed receiver

R6303SB Specifications:

• FASST-2.4GHz System (7ch/8ch/10ch/Multi-ch)
• S.BUS
• 3-channels for conventional system (not using the USB channels)
• Dual Antenna Diversity
• Size: 22.5 x 37.4 x 9.3 mm
• WeighT: 7.2 g
• Power Requirement: 3.7-7.4V
• Voltage Range: 3.5-8.4V

Receiver is brand new, but delivered without original box since it was separated from the radio set

Futaba R7308SB Receiver, FASSTest with Dual Rx Link

R7308SB– FASSTest Bi-Directional Communication System with S.Bus / S.Bus2 Port and 8 Channels for Conventional System Receiver.

The R7308SB is equipped with the Dual Rx Link system allowing a second FASSTest Rx to be connected via an SBUS2 port and offer Rx redundancy.

SIZE:

24.9 mm x 38.8 mm x 14.3 mm / 0.98 in x 1.53 in x 0.56 in

WEIGHT:

11.0 g / 0.39 oz

POWER REQUIREMENTS:

3.7 V to 7.4 V (Voltage Range: 3.5 V to 8.4 V)

EXTRA VOLTAGE PORT:

0 ~ 70 V DC

Futaba receiver antenna, for 2.4 GHz FASST receivers.

Allows the receiver aerial to be deployed outside the fuselage in models with all-carbon canopies or fuselages
The aerial can be replaced by any experienced user.

Set of 2

Original Futaba receiver antenna, for 2.4 GHz FASST receivers.

Length of 150mm for receivers FUTABA 2.4G R606FS, R617FS, R608FS, R6014 and others, most of them are 150mm long
Also fits other brand receivers.

Allows the receiver aerial to be deployed outside the fuselage in models with all-carbon canopies or fuselages
The aerial can be replaced by any experienced user. Set of 2 antennas

Futaba Receiver Connector Top Cover. This optional accessory is useful to cover unused servo ports on your receiver. Package includes five receiver connection covers.

The Futaba R324SBS is a compact and lightweight T-FHSS SR 2.4 GHz receiver with integrated telemetry function and diversity antenna. The transmission mode T-FHSS SR is currently the fastest transmission technology on the market!

S. BUS2 sensors can be connected via the S. BUS2 connection and up to 32 telemetry data sets can be transmitted. The telemetry transmitter integrated in the receiver transmits the telemetry data on the S. BUS2 connection to the transmitter, which displays, announces or outputs them acoustically.

The receiver is particularly suitable for use in RC cars and boats.

NOTE: When using 7.4 V LiPo batteries as a receiver battery, the connected servos must also be designed for this voltage. The receiver does not have an internal voltage regulator for the servo voltage!

Features:

4-channel T-FHSS SR 2.4 GHz telemetry receiver with S. BUS2

fastest transmission system T-FHSS SR

diversity antenna for optimal reception

gold-plated contacts

telemetry function with 32 channels

S.BUS2Output

Hi-voltage

suitable for RC-cars & boats

The new Futaba R7108SB is a compact and lightweight FASSTest 2.4 GHz receiver with integrated telemetry function. It is based on the well-known Futaba R7008SB. What is new about this receiver is that it also features the older FASST protocols, which can be switched directly at the receiver.

This means that this receiver can also be operated with older FASST systems. Due to the super slim design, the receiver is perfectly suited for models with narrow hulls. The R7108SB has antenna diversity and constantly checks the signal quality of both antenna inputs. This way the receiver switches to the better input signal in a flash and seamlessly.

Technical data:

•     Frequency band: 2.4 GHz
•     Transmission system: FASSTest / FASST
•     Number of channels: 8 PWM / 18 S.BUS
•     S.BUS output: S.BUS / S.BUS2
•     Voltage range: 3.7 to 8.4 V
•     Dimensions: 47 x 25 x 14,3mm
•     Weight: 12g

Futaba receiver R7206SB - FASSTest 2.4GHz 6K S.BUS2 Receiver Dual RX Link

The R7206SB is a FASSTest-2.4GHz compatible receiver. The R7206SB features bi-directional communication with a Futaba FASSTest transmitter using the S.BUS2 port. Using the S-BUS2 port an impressive array of telemetry sensors may be used. It also includes booth standard PWM output ports (CH1-6) and S.BUS output ports. The new R7206SB can also be switched to the Dual RX Link system. This system can ensure safety by mounting two FASSTest receivers in one aircraft.

Specs:

• FASSTest 2.4GHz System
• Bi-directional Communication System
• Dual RX Link System
• S.BUS2 & S.BUS port - 6 channels for conventional system receiver
• Dual antenna diversity
• Size:  38.3x22.5x12.2mm
• Weight: 8.8g
• Power requirement: 3.7-7.4V (voltage range 3.5-8.4V)
• Battery F/S voltage: Sets up with the transmitter

With the Futaba R7208SB, Futaba offers a particularly light and small receiver with telemetry and the new Dual RX function. Its narrow design makes it ideal for use in narrow fuselages.

When the R7208SB is operated in Dual RX mode, a second S.BUS/S.BUS2 receiver is connected to the one on the R7208SB and operated in parallel. Receiver redundancy further increases model reliability: In case of a problem at the main receiver, the system switches to the second receiver in a flash.

An additional S.BUS/S.BUS2 receiver is required to operate the R7208SB in dual link mode.

The R7208SB features antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it in a flash.

Analog or digital servos can be connected to ports 1 to 8. To enable shorter response times, the servo output signal for digital servos can be changed to 6.3 ms (instead of 16 ms for analog servos). The PWM ports can be switched so that channels 9 to 18 can be used alternatively at the ports. Or the ports can be used as additional S.BUS2 ports.

Up to 18 programmable S.BUS servos or other S.BUS components such as gyros, flybarless systems or governors can be connected to the S.BUS port. All S.BUS servos are digitally addressed and can be connected with a single servo line (3 wires). Although 4 servos are installed in a wing, only one servo cable goes into the wing. This keeps the complete wiring very simple and clear. If analog servos are to be used on the S.BUS, they must be connected using a PWM adapter.

S.BUS2 sensors can be connected to the S.BUS2 ports. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter (FASSTest only). This allows the measured values to be displayed or acoustically output at the transmitter. In addition, the receiver automatically always transmits the voltage of the receiver power supply (voltage sensor is integrated) and the signal strength.

The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV!

FEATURES

• Transmission type: FASSTest
• Frequency range: 2.4 GHz
• Channels: 8 PWM / 18 S.BUS
• Transmit power: 100 mW EIRP
• S.BUS Port: S.BUS / S.BUS2
• Voltage range: 3.7 - 8.4 V
• Weight: 11 g
• Dimensions: 24.9 x 38.8 x 14.3 mm

• 8/18 channel FASSTest receiver
• Dual RX Link
• Telemetry with S.BUS2
• Telemetry with 32 channels
• PWM channels 1-8 or 9-16 selectable
• S.BUS / S.BUS2 port
• Hi-Voltage (HV)
• Antenna diversity
• Pulse switching digital servos

Receiver can come with plastic package or bulk (plastic bag)

Sensor telemetry number of revolutions per minute to aircraft propeller blades or helicopters

FEATURES

Length: 160mm with the cable

Weight: 4.9gr

Voltage 3.7 – 7.4v

Rounds per minute: 360 – 300.000RPM

The Futaba S-A601 is a high-torque coreless servo designed specifically for large-scale RC aircraft. With its robust construction, aluminum middle case, and advanced S.Bus compatibility, it delivers exceptional torque, speed, and precision required for demanding flight applications.

Key Features:

• Torque @ 7.4V: 41.0 kg·cm (569.4 oz·in)
• Torque @ 6.6V: 36.8 kg·cm (511 oz·in)
• Speed @ 7.4V: 0.11s/60°
• Speed @ 6.6V: 0.12s/60°
• Voltage Range: 4.8V – 8.4V
• Dimensions: 40.5 × 21.0 × 37.2 mm
• Weight: 74 g
• Motor Type: Coreless
• Case: Aluminum middle case
• Gears: Metal gears
• Bearings: Dual ball bearings
• Compatibility: S.Bus, PWM

Programmable Functions:

• Channel assignment
• Servo direction reversal
• Soft start toggle
• Neutral point adjustment (±300 µs)
• Speed adjustment (0.39 – 9s per 45°)
• Dead band tuning
• Travel range adjustment (50–175%)
• Start power, damping, and holding power settings

Programming Options:

• CIU-2/-3 USB PC Interface
• Directly via compatible Futaba S.Bus transmitters

Delivered With:

• Servo Horns
• Mounting Hardware

The S-A601 is engineered for precision and durability, making it an ideal choice for high-performance RC aircraft enthusiasts seeking top-tier servo performance with fast response and high torque.

Note: Not recommended for use with dry batteries or BEC systems. For optimal performance, use a dedicated power supply.

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

This S-BUS adapter lead connects the gold connector in the root rib to 3 pole socket in the batetry backer.
Both plugs have locks, which ensure a reliable contact, but also easily released. The plug connection is polarity-protected.
Dependent upon the application, the S-BUS wiring may be split at the wing or battery backer.

Futaba S-BUS Surface Adapter cable Female-Female 50 cm, 1mm

set of 1

The Futaba S9075SB is a high-torque digital servo designed specifically for 1/8 scale RC cars and boats. With its robust aluminum case, powerful motor, and advanced S.Bus compatibility, it delivers exceptional torque, speed, and precision required for demanding applications.

Key Features:

• Torque @ 6.0V: 30.6 kg·cm (424.6 oz·in)
• Speed @ 6.0V: 0.14s/60°
• Voltage Range: 4.8V – 6.0V
• Dimensions: 40.5 × 21.0 × 37.4 mm
• Weight: 71 g
• Motor Type: High-power
• Case: Full CNC aluminum
• Gears: Metal gears
• Bearings: Dual ball bearings
• Compatibility: S.Bus, PWM

Programmable Functions:

• Channel assignment
• Servo direction reversal
• Soft start toggle
• Neutral point adjustment (±300 µs)
• Speed adjustment (0.39 – 9s per 45°)
• Dead band tuning
• Travel range adjustment (50–175%)
• Start power, damping, and holding power settings

Programming Options:

• CIU-2/-3 USB PC Interface
• Directly via compatible Futaba S.Bus transmitters

Delivered With:

• Servo Horns
• Mounting Hardware

The S9075SB is engineered for precision and durability, making it an ideal choice for high-performance RC car and boat enthusiasts seeking top-tier servo performance with fast response and high torque.

Note: Not recommended for use with dry batteries or BEC systems. For optimal performance, use a dedicated power supply.

The Futaba S9373SV is a high-performance digital servo designed specifically for 1/8 scale RC cars and boats. With its robust aluminum case, coreless motor, and advanced S.Bus2 compatibility, it delivers exceptional torque, speed, and precision required for competitive racing.

Key Features:

• Torque @ 7.4V: 24.6 kg·cm (341.7 oz·in)
• Torque @ 6.0V: 20.0 kg·cm (277.8 oz·in)
• Speed @ 7.4V: 0.06s/60°
• Speed @ 6.0V: 0.07s/60°
• Voltage Range: 4.0V – 8.4V
• Dimensions: 40.5 × 21.0 × 37.2 mm
• Weight: 76 g
• Motor Type: Coreless
• Case: Full CNC aluminum
• Gears: Metal gears
• Bearings: Dual ball bearings
• Compatibility: S.Bus, S.Bus2, PWM
• Signal Modes: 1520 µs (default)

Programmable Functions:

• Channel assignment
• Servo direction reversal
• Soft start toggle
• Neutral point adjustment (±300 µs)
• Speed adjustment (0.39 – 9s per 45°)
• Dead band tuning
• Travel range adjustment (50–175%)
• Start power, damping, and holding power settings

Programming Options:

• CIU-2/-3 USB PC Interface
• Directly via compatible Futaba S.Bus transmitters

Delivered With:

• Servo Horns
• Mounting Hardware

The S9373SV is engineered for precision and durability, making it an ideal choice for high-performance RC car and boat enthusiasts seeking top-tier servo performance with fast response and high torque.

Note: Not recommended for use with dry batteries or BEC systems. For optimal performance, use a dedicated power supply.

Futaba SBS-01ML - T16IZ-SUPER Telemetry adapter for Pixhawk (Ardupilot) Drone Flight Controller

Can be monitored by transmitter:

• Battery voltage
• Battery current
• Altitude
• Ground Speed
• Air Speed
• Number of GPS receiving satelites
• HDOP

Specs:

• Length: 180mm
• Weight: 3.6g
• Voltage: 3.7-7.4

*Does'nt work without Ardupilot

New S.BUS2 telemetry temperature sensor - perfect for electric motors etc.

The SBS-01TE may only be used with telemetry enabled receivers that offer S.BUS2 port(s). Please refer to the manual(s) that accompanied your transmitter and/or receiver for proper connection.

• Temperature Range: 0-125°C
• Length: 350 mm
• Weight: 3.8 g
• Voltage: 3.7-7.4V DC

Includes:

• SBS-01TE Telemetry S.BUS2 Temperature Sensor
• Aluminum Tape

Futaba Servo gears special Grease, keep your servos fly long time

A must to use on servos, fits metal and plastic gears, made by Futaba Japan, but fits All servos
Absolutely essential for model helicopters and cars, also for all other applications

Plug for square Futaba series.

Fits all futaba  transmitters with Square plug, to be used to make Trainer or Simulator cables.

Fully Equipped 10 - channel handheld transmitter with integrated telemetry function in 2.4GHz FHSS - T  frequency - hopping technology .
The ideal plant for advanced control of the airplane , helicopter and Multicopter - models , place value on a precise feeling of control .
The T10J allows with your extremely rich features also demanding applications and leaves nothing in terms program-ability almost nothing to be desired. The ergonomically designed transmitter case with known Futaba build quality feels good in the hand and is characterized by conveniently arranged controls .
A 128 x 64 pixels large, back-lit LCD display , with large pixels for better legibility in all light conditions .
The graphically -driven user interface , with the known simple Futaba menu structure makes for easy operation - the menu system can be chosen in 7 languages. The intuitive 3D hot-key allows quick and easy navigation through the menu structure and easy adjustment of all parameters.

Highlights

• T- FHSS 2.4GHz technology
• High interference by rapid frequency hopping modulation (100 times per second . )
• Future-proof (equivalent already the new EU standard of 2015)
• Integrated 32- channel telemetry system with high range
• Telemetry real-time display on a large screen
• Voice output through optional headphones with 3.5 mm jack
• Melody and sound output ( either via internal beeper or optional headphones)
• Vibration Alarm system
• 65 x 34 mm large, back-lit display (128 x 64 dot)
• S- BUS technology for full digital integration of S.BUS servos , S.BUS controllers and sensors S.BUS
• By S.BUS support ideal for helicopter with flybarless systems S.BUS
• Integrated patch antenna for always optimal antenna radiation
• Fully equipped 10 - channel transmitter with 19 controls
• Precision , backlash-free stick with open- stick mechanism
• The stick units for universal mode (Mode 1 and 2) can be user- Changed .
• Supplied with heavy NiMH battery for 10 hours of operation , and charger.

Included:

        T10J Transmitter

• R3008SB Receiver
• Switch Harness
• Neck Strap

1. 10 (8 +2) channels
2. Switching from T- FHSS (10 channels ) to S- FHSS (8 Kan) - modulation.
3. T- FHSS Frequency Hopping technology with integrated telemetry
4. A broad channel spread results in high noise immunity and ultra-fast response times for precise , direct control feel .
5. FEC technique that T- FHSS  receiver scan the input signal continuously and apply an intelligent error correction method to
6. 100mW transmit power
7. No reaction speed loss even with heavily occupied frequency band
8. Real - time response - real-time control
9. Excellent range
10. Ultra-fast , direct, continuous digital modulation for the shortest response times
11. EasyLink - extremely simple , fast binding process between sender and receiver
12. Fast and reliable automatic re- binding , even under difficult conditions
13. Intelligent Servo Timing for uniform servo control and prevention of servo delay differences
14. Dual Antenna Diversity - extremely fast switching between two receiving antennas for optimal reception signal quality (depending on receiver)
15. Integrated range check function to check the reach before the start

Futaba T16IZ-SUPER Mode-1/2/3/4 - Transmitter Only

MODE-1/2/3/4:
This transmitter is set on default Mode-2, with the throttle on the left hand stick and elevator on the right stick. But it can be changed in the software to any of the Mode-1/2/3/4 by the user.

FASSTest System
The T16IZ SUPER transmitter has adopted the bidirectional communication system "FASSTest". Data from the receiver can be cheched in your transmitter.  FASSTest is a maximum 18 channels 2.4GHz dedicated system.

Color Touch LCD Screen
T16IZ SUPER has an HVGA 4.3", full-color, backlit LCD touch screen. The screen is transflective which enables booth indoor and outdoor visibility.

S.BUS2 System
By using the S.BUS2 system, multiple servos, gyros and telemetry sensors are easily installed with a minimum amount of cables.

Model Types

• Multicopter
• Helicopters: 8 different swash plate types are available
• Airplanes: 7 wing types & 3 tail types are available
• Functions and mixers necessary for each model type is set in advance at the factory

Lithium-Ion Polymer Battery
T16IZ SUPER is operated by a 7.4V/2000mAh LiPo battery (included) that is charged with an included USB-A/USB-C cable. USB-A Power adapter is sold separately.

MicroSD Card (not included)
Model data can be saved to a microSD card (SD: 32MB-2GB / SDHC: 4-32GB). When T16IZ SUPER transmitter software files are released, the software can be updated by using a microSD card update.

Edit Buttons
Two edit update buttons are provided and the operating screen can be immediately "Returned" to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor.

Vibration Function
Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer.

Speech Function
A function which allows the system to provide telemetry data audibly. This function can also be utilized with commercial available earphones.

Compatible receivers (as of MAY 2023):

S-FHSS PROTOCOL:

• R2008GS
• R2008SB
• R2106SB
• R2001SB
• R2000SBM

T-FHSS TELEMETRY PROTOCOL:

• R3001SB
• R3004SB
• R3006SB
• R3008SB
• CGY760R

T-FHSS MONO (NON-TELEMETRY):

• R3206SBM
• R3106GF

FASSTest12 and FASSTest18:

• R7003SB
• R7006SB
• R7008SB
• R7108SB
• R7014SB
• R7208SB
• R7308SB
• CGY760R

The long-awaited successor to the best-selling model “T18SZ”, the new T26SZ is now official!

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts. It is also equipped with a number of new functions, including the new communication system FASSTest 26ch. It is a masterpiece that is comparable to the high-end class, and can be said to be the result of Futaba's many years of accumulated know-how and solid results.

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts.

• It is also equipped with a number of new functions, including the new communication system FASSTest 26ch.
• It can be said that Futaba has accumulated many years of know-how and a solid track record.
• It is a masterpiece that is as good as the high-end class.

Features:

• Sub-display
• Lightweight lithium polymer battery
• USB-C charging
• Game controller function (Flight simulator compatible)
• Fast response non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• Receiver with high gain antenna
• Wireless trainer function

• 2.4GHz FASSTest, S-FHSS/T-FHSS system compatible
• Multi-color monitor lamp
• Replaceable switch lever (replacement switch is optional; compatible switches are SE/SF/SG/SH)
• Left and right slide levers (4 systems)
• 6 systems digital trim
• Color monitor with touch panel
• Edit button
• microSD card slot
• Equipped with LT2F2000B lithium polymer battery for transmitter
• User name registration/character input
• Trainer (wireless)
• DLPH-2 operation mode setting function (new feature)
• Receiver output port setting function (new feature)
• S.BUS servo setting function
• Gyro setting function (compatible models CGY755/CGY760R/CGY770R/GYA553)
• Image
• Sound switch
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idle Down
• Swash settings (for helicopter only)
• Timer
• Data reset
• Servo monitor
• Condition selection
• AFR (D/R)
• Program mixing
• Sequencer new features
• Aileron differential
• Flap settings
• Aileron → camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (helicopter function)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function

Box contents

• Transmitter T26SZ FASSTest
• R7208SB Receiver
• Transmitter battery LiPo LT2F2000B

The long-awaited successor to the best-selling model “T18SZ”, the new T26SZ is now official!

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts. It is also equipped with a number of new functions, including the new communication system FASSTest 26ch. It is a masterpiece that is comparable to the high-end class, and can be said to be the result of Futaba's many years of accumulated know-how and solid results.

Futaba's high-end aerial model T32MZ series is loved by many competitors. We want to inherit that DNA and experience the specs and operability at a more reasonable price! This is a model that can fully meet the needs of such enthusiasts.

• It is also equipped with a number of new functions, including the new communication system FASSTest 26ch.
• It can be said that Futaba has accumulated many years of know-how and a solid track record.
• It is a masterpiece that is as good as the high-end class.

Features:

• Sub-display
• Lightweight lithium polymer battery
• USB-C charging
• Game controller function (Flight simulator compatible)
• Fast response non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• Receiver with high gain antenna
• Wireless trainer function

• 2.4GHz FASSTest, S-FHSS/T-FHSS system compatible
• Multi-color monitor lamp
• Replaceable switch lever (replacement switch is optional; compatible switches are SE/SF/SG/SH)
• Left and right slide levers (4 systems)
• 6 systems digital trim
• Color monitor with touch panel
• Edit button
• microSD card slot
• Equipped with LT2F2000B lithium polymer battery for transmitter
• User name registration/character input
• Trainer (wireless)
• DLPH-2 operation mode setting function (new feature)
• Receiver output port setting function (new feature)
• S.BUS servo setting function
• Gyro setting function (compatible models CGY755/CGY760R/CGY770R/GYA553)
• Image
• Sound switch
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idle Down
• Swash settings (for helicopter only)
• Timer
• Data reset
• Servo monitor
• Condition selection
• AFR (D/R)
• Program mixing
• Sequencer new features
• Aileron differential
• Flap settings
• Aileron → camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (helicopter function)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function

Box contents

• Transmitter T26SZ FASSTest
• R7214SB Receiver
• Transmitter battery LiPo LT2F2000B

Futaba’s new Potless flagship radio, the T32MZ, is another leap forward in performance, precision and control.

With 18 channels as standard - 16 proportional and 2 switched channels - the T32MZ can be used with up to two MPDX-1 Multiprop Decoders (sold separately) to give up to a maximum of 32 channels. When expanded this way, there are 14 proportional channels (as two are used by the Multiprop Decoders), 2 switched channels and a further 16 multiprop channels. Note that multiprop channels have lower resolution to normal proportional channels and they can’t be used in mixed functions. They are perfect for ancilliary and auxiliary functions such as lights, retracts and scale, non-flying functions.

Main Display

The T32MZ has a huge HVGA (640x240 pixel) full colour backlit LCD touch screen. Its anti-reflective construction means it is perfect for indoor and outdoor use.

Sub Display

A first for Futaba, the T32MZ has a colour sub-display at the top of the transmitter for timers and telemetry information.

High Capacity 6600mAh LiPo battery

A high capacity transmitter battery gives extended operation times.

Quad Ballraced Hall Effect Stick Units

Each stick axis is supported by dual ball bearings and uses non-contact Hall-effect sensors rather than potentiometers. The throttle stick ratchet can be adjusted to sprung self-neutral without removing the back of the transmitter, thus mode changing is simple.

Replaceable Switches

The 4 toggle switches can be exchanged for optional two, three or momentary switches to suit the pilot’s preference.

Operating protocols

Can be used on FASSTest/FASST/S-FHSS and T-FHSS protocols.

Includes

• T32MZ Transmitter (Air Version includes ratcheting throttle, Helicopter Version includes smooth throttle)
• R7208SB Receiver
• LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness
• Tool Box (includes special jig for adjustment)
• Neck Strap
• Transmitter Case


Transmitter Specs:


• Transmitter Frequency: 2.4 GHz band
• Operating System: 2.4 GHz FASSTest/FASST/T-FHSS/S-FHSS System
• Power Supply: 3.8 V L1F6600B Lithium-polymer battery
• RF Power Output: 100 mW EIRP
• Weight (with battery): 1126 g


R7208SB Receiver Specs:


• Size: 38.9 x 25 x 14.5 mm
• Weight: 9g

• 2023 F3A World Championship Lassi Nurila wins using Futaba transmitter.
• 2023 F3C World Championship Hiroki Ito wins using T32MZ.
• T32MZ has undergone minor changes as a commemorative model for winning the F3A & F3C World Championship!
• The casing is premium dark brown, equipped with a new communication system FASSTest 26ch, etc.
• A number of new features have also been added.
• With the numerous know-how that Futaba has accumulated over many years,
• It is a masterpiece worthy of its superlative name, and can be said to be the result of a solid track record that symbolizes winning the world championship.

Specs:

• Sub-display
• Lightweight lithium polymer battery
• Micro USB charging
• Transmitter equipped with GPS
• Non-contact potentiometer
• Highly rigid resin stick
• Stick mode switching function
• New receiver with high gain antenna
• Adopts Windows®CE
• 2.4GHz FASSTest, FASST multi, FASST7ch, S-FHSS/T-FHSS format compatible
• Built-in GPS
• Monitor LED
• Switch lever replaceable type
• Left and right slide lever (S/ST)
• Digital trim
• Touch panel
• Edit button
• SD card slot
• Equipped with LT1F6600B lithium polymer battery for transmitter
• Tool box
• User name registration/character input
• Music playback
• Trainer
• DLPH-2 settings new features
• Receiver settings new function
• S.BUS servo setting
• Servo ID list display new function
• Image
• Sound
• Sub trim
• Balance new feature
• Reverse
• Fail safe
• End point (ATV)
• Throttle cut
• Idol Down
• Swash settings (for helicopter only)
• Timer
• Dial monitor
• Data reset
• Servo monitor
• Condition selection
• AFR(D/R)
• Program mixing
• Sequencer new features
• Fuel mixture (for airplanes and helicopters only)
• Aileron differential
• Flap settings
• Aileron → Camber FLP
• Aileron → Brake FLP
• Aileron → Rudder
• Air brake → ELE
• Rudder → Aileron
• Camber mixing
• ELE → Camber FLP
• Camber FLP→ELE
• Butterfly
• Trim mix
• Air brake
• Gyro sensitivity operation
• V-tail
• Elbeta
• Winglet
• Ladder → elevator
• Snap roll (for airplanes only)
• Multi-engine (for airplanes only)
• Pitch curve
• Throttle curve
• Acceleration (helicopter function)
• Throttle hold (helicopter function)
• Swash mixing (helicopter function)
• Throttle mixing (function for helicopters)
• Pitch → Needle (function for helicopter)
• Pitch → Rudder (function for helicopter)
• Telemetry log function
• Multi-prop function (supports 32ch using optional MPDX-1)

Content:

• T32MZ Transmitter (Air Version includes ratcheting throttle, Helicopter Version includes smooth throttle)
• R7208SB Receiver
• LT1F6600B Lithium Polymer Battery and AC Adapter Switch Harness
• Tool Box (includes special jig for adjustment)
• Neck Strap
• Transmitter Case

Futaba 4PM-PLUS Transmitter with R334SBS receiver

T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:

In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response.
SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system.

T-FHSS MINIZ SYSTEM:
By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated Kyosho receiver RA-42 requires purchase separately.

FHSS MINIZ SYSTEM:
By changing to the MI-FH system in the receiver setting menu, you can use Kyosho Mini – Z FH FS-RM005 module to connect to non-Evo Mini-z.

TELEMETRY SYSTEM:
The T4PM+ transmitter has adopted the newly developed bidirectional communication system “T-FHSS”.

2.4 GHZ SS RADIO COMMUNICATION SYSTEM:
Frequency channel setting is unnecessary: Channel shifting takes place within the 2.4 GHz band automatically. This system minimizes the interference from other 2.4 GHz systems.

MODEL MEMORY FOR 40 MODELS:
Model names can use up to 10 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.

4-AXIS JOG BUTTON:
The (JOG) button can be operated in 4 directions: up, down, left, and right.

ESC-LINK FUNCTION (MC-LINK):
This dedicated function allows you set up the Link software so that your T4PM can control variable frequency and other data changes in Futaba speed controllers (ESCs): MC970CR, MC850C, MC851C, MC602C, MC402CR, etc.

S.BUS SERVO:
This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.

STEERING MIXING:
Smooth cornering is possible by independent left and right steering servo setting.

BRAKE MIXING FOR LARGE CARS (BRAKE):
Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.

GYRO MIXING (GYRO MIX):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.

4WS MIXING FOR CRAWLERS AND OTHER 4WS TYPE (4WS):
This function can be used with crawlers and other 4WS type vehicles.

DUAL ESCS MIXING FOR CRAWLERS CARS (DUAL ESC):
ESCs at the front and rear are controlled independently.

CPS-1 MIXING (CPS MIX):
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.

ANTI-SKID BRAKING SYSTEM (TH A.B.S):
This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.

THROTTLE ACCELERATION (ACCEL):
Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.

THROTTLE SPEED (SPEED):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.

STEERING SPEED (SPEED):
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.

RACING TIMER (TIMER):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Re-/fueling time are indicated by an audible alarm. An up timer is also provided.

FUNCTION SELECT SWITCH (SWITCH)/DIAL FUNCTION (TRIM DIAL):
This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.

TRIGGER POSITION CAN BE CHANGED:
The position of the throttle trigger can be moved forward and backward.

TENSION ADJUSTMENT FUNCTION:
The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.

MECHANICAL ATL ADJUSTMENT:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.

YOUR T4PM-PLUS INCLUDES THE FOLLOWING COMPONENTS:

• T4PM-Plus Transmitter
• R334SBS Receiver
• Dry Battery Holder
• Mini Screwdriver

TRANSMITTER SPECS:

• T-FHSS SR/T-FHSS/S-FHSS SYSTEM, WHEEL TYPE, 4 CHANNELS
• COMMUNICATION METHOD: Bidirectional protocol
• MAXIMUM OPERATING RANGE: 100m (Except the MINIT system) (Optimum condition)
• FOR SAFETY: F/S, B-F/S, ID
• TRANSMITTER FREQUENCY: 2.4GHz band
• RF POWER OUTPUT: 100mW EIRP
• POWER REQUIREMENT: (Dry Cell Battery) Penlight x 3 (4.5 V)
• CURRENT DRAIN: 150mA or less
• TRANSMISSION ANTENNA: 1/2λ di-pole

R334SBS Specs:

• T-FHSS SR
• SIZE: 33.9 x 22.3 x 11.3 mm
• WEIGHT: 7.5g
• OPERATING VOLTAGE: DC 3.7-7.4V

Futaba T6K 2.4Ghz FHSS/S-FHSS/T-FHSS 6ch S.Bus Transmitter & R3008SB Receiver Combo

The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS. *S-FHSS system does not support telemetry function.

System Features:

•     15-model memory
•     Function Voice Telemetry
•     10-character model naming
•     Trims: with storage of digital values
•     Functions: (ATV / EPA) by the end of servo travel adjustment
•     Stroke Servo: 3 settings and exponential function (EXP)
•     4 switches / potentiometer 1
•     Failsafe: adjustable lanes 1-6
•     Mixes planes and helicopters
•     T-modulation FHSS / S-FHSS
•     Stopwatch
•     Offset neutral
•     Trainer Mode
•     Monitor servos
•     Alarm Adjustable battery under multiple voltages
•     Audible and vibrating alarms
•     Port S-BUS

Futaba T7PX Radio Case

12 / 14-channel RF module for converting robbe/Futaba transmitters fitted with the MZ-FM RF module, such as the T12Z, T12FG and T14MZ.

This module was Installed on radio, but very low time of work

The latest practical tests confirm the long range of the Futaba FASST system:
Ground – ground: more than 2000 meters range ! (receiver at 1.5 meters above ground, visual contact)
Ground – air: more than 3000 meters range ! (with visual contact to receiver)

This product is suitable for European region

• 2.4GHz Spread Spectrum radio communication system
• Exclusive ID code to avoid interference from other FASST systems
• Fail Safe (F/S) function, Battery F/S

Specification:

• Communication system: one-way communication
• Antenna: 1/2 wavelength di-pole
• Current consumption: 150mA maximum
• LED (light emitting diodes) indicate the operational status

DIY Trainer cord/buddy cable for futaba radios( square).

Delivered : 2 connectors, Cable 2 meters, Soldering lead, instructions

Save $$$ by DIY, assembly time- 15 minutes.

The teaching hotline between student and instructor!

• Inexpensive accessory increases chances of flying success for first-timers
• Connects between radios in seconds leaves students free to learn and allows instructors to take control in trouble situations
• Generous 6-foot length allows plenty of "elbow room" for instructor and student alike
• Trainer cord for two Futaba transmitters who use Square Futaba adaptor.
• A right-angle bend in the 9C's micro connector allows the transmitter to lay flat.

Fits all futaba radios with Square connector..

Length: 2 meters.

Color: Black

Futaba Transmitter Adjustable Length Lanyard Neck Strap,as well fit all radios

Original Futaba single-point neck strap, orange.
Width approx 30 mm.

Adaptor lead suitable for Futaba or Hitec Round connector

The new Megatech T4PL pistol-grip computer system features a sleek, modern design. The focal point of the transmitter is the backlit screen, which is located in the upper part of the transmitter, where it is clearly visible. For professional RC car and racing boat operators, exploiting 2.4 GHz FHSS technology with Frequency Hopping

No more same-channel interference, virtual immunity to interference, and resistance to background interference - these are the main advantages of FHSS technology.

When designing the T4PL transmitter, which is a completely new development, the various controls were arranged with ergonomic efficiency as top priority. All the controls are well positioned and easy to use. The system is also very light in weight at just 550 g.

The central control area with LCD screen lies in the direct line of sight of the operator, making it easy to read off values even during a race. The mixer functions are virtually identical to those of the proven T4PK(S) professional system.
An innovation in this class of systems is the expansion to four control channels. The separate fourth channel is particularly useful with 1 : 5 scale RC cars for controlling the front and rear brakes separately.

Another new feature is the Crawler function for Trials vehicles. This term refers to a mixer function for four-wheel steering. The front and rear axles can be steered separately, together, in the same or opposite directions, depending on requirements.

The Timer function has also been expanded by a pit-stop timer, to remind the operator to call in for pit-stops in good time.
Switching from S-FHSS (High-Speed mode - only in conjunction with digital servos) and FHSS -mode.
Forty models can be stored in the internal model memory, which is sufficient even for an extensive array of vehicles.

Functions:

30 channels at 1.5 MHz spacing. 2404 ... 2447.5 MHz frequency band.
28 simultaneous users.

Specification:

Weight: 550 g

Frequency band: 2404.00

Current drain: ca 220 mA

Transmission system: FHSS / S-FHSS

Functions: 8/4 Servos