Field Use tools
Tools used on the field, mostly need items when you go to fly. Dont get caught without those.
SwitchGlo DIY Kit Push-Button & Glow Indicator
Designed for the "do-it-yourselfer" to build your own custom ground switch and glow indicator for SwitchGlo Pro. Perfect for the Scale Modeler who wants onboard glow confirmation while in flight, but also keep the most realistic look without having unnecessary cut-outs in the body of the aircraft. Enjoy the freedom to mount an extra LED and/or push-button anywhere on your plane! The push-button is a secondary 12 second glow trigger while grounded. The LED indicator is for visual confirmation of glow while SwitchGlo/PushGlo is activated. This kit is designed to be cut apart into 2 or 3 pieces, allowing the ability to mount each of them in totally separate locations. This 3-way module includes 18 inches of 4-strand ribbon wire, an external push-button, a board-mounted "super-bright" LED chip, an optional red thru-hole LED with a concealable clear lens, and easy soldering & wiring instructions. |
€10.00
Inc. VATSwitchGlo PushGlo Push-Button Onboard Glow Ignitor w/Alligator Pigtail
This is the SwitchGlo PushGlo Push-button Onboard Glow Driver/Igniter, featuring an Alligator pigtail connection. The PushGlo shares many of the same microprocessor based features as the revolutionary SwitchGlo Pro, such as: selectable glow time, audible “know when you glow” buzzer, spent glow plug detection, auto compatibility with 4 to 9 volt RX battery source, accessory port for optional LED and push button extender modules. PushGlo is a true plug and play device. Simply plug or Y-adapt the power cable into a receiver channel, attach the glow cable onto your glow plug, fix the ground wire to the engine mounting bolt for grounding, and push the button for 12 seconds of glow. Each additional push adds 12 seconds of glow for up to 60 seconds of continuous glow. Terminate an extended glow by pressing the button down for 2 seconds. For a few extra dollars over a conventional glow igniter, PushGlo provides all these features and a load of convenience you never thought possible! Imagine one less clunky, troublesome, battery operated item to carry around. Lose that NiMH powered igniter and start glowing smarter with the PushGlo! Features: |
€39.90
Inc. VATSwitchGlo PushGlo Push-Button Onboard Glow Ignitor w/Clip Pigtail
This is the SwitchGlo PushGlo Push-button Onboard Glow Driver/Igniter, featuring an CLIP pigtail connection. The PushGlo shares many of the same microprocessor based features as the revolutionary SwitchGlo Pro, such as: selectable glow time, audible “know when you glow” buzzer, spent glow plug detection, auto compatibility with 4 to 9 volt RX battery source, accessory port for optional LED and push button extender modules. PushGlo is a true plug and play device. Simply plug or Y-adapt the power cable into a receiver channel, attach the glow cable onto your glow plug, fix the ground wire to the engine mounting bolt for grounding, and push the button for 12 seconds of glow. Each additional push adds 12 seconds of glow for up to 60 seconds of continuous glow. Terminate an extended glow by pressing the button down for 2 seconds. For a few extra dollars over a conventional glow igniter, PushGlo provides all these features and a load of convenience you never thought possible! Imagine one less clunky, troublesome, battery operated item to carry around. Lose that NiMH powered igniter and start glowing smarter with the PushGlo! Features: |
€39.90
Inc. VATSwitchGlo PushGlo Twist-Lock Tool
Custom machined aluminum wrench that fits over the stainless steel barrel of the Twist-Lock Pigtail, eliminating the need for needle nosed pliers. This tool is extremely handy for quick installation and removal of the Twist-Locking cap on motors with either a deep cooling head or mounted deep into a Heli frame . A custom solution for glow plugs that are hard to reach. |
€10.00
Inc. VATTraxxas Tool Kit - 12 Pcs -The Perfect Companion
The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. Tool Kit Features:
|
€33.00
Inc. VAT10 Piece Combination Spanner Set 4-11mm
This "economy" spanner set includes just about all the sizes you will ever need on a model heli. |
€24.00
Inc. VATANTISTATIK 100 Spray- Get ESD electro static away from your Helicopter
Against electro-static charge. A must for Helicopters |
€12.00
Inc. VATBEASTX Bevel Box and Mounting Frame Set
BEASTX Bevel Box and Mounting Frame Set |
€49.99
Inc. VATChrome Vanadium Steel Ball link Plier for RC Helicopter
These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open. High quality chrome vanadium steel material , Slip-resistant handle, easy to hold it and operate. |
€15.00
Inc. VATChrome Vanadium Steel Ball link Plier for RC Helicopter
Deluxe type, ball link plier, multi purpose tool. These are GREAT working pliers! Soft grip handle, curved end of jaws, spring loaded open. Not only the best we've used, also the best value! |
€15.00
Inc. VATEtronix 150A Watt Meter & Power Analyser #ET0506
Etronix 150A Watt Meter & Power Analyser Helps to prevent peak currents damaging battery, ESC's, motor, wiring and connectors. Specifications:
|
€32.90
Inc. VATLynx Heli CNC Ball Link Pliers - 5 to 5.5mm #LX3065
A good and precise (Zero Slop - Full Action) Ball Link Pliers is a dream of every Heli lovers. In Lynx we redesign the classic universal Ball Link Pliers keeping in mind CNC precision manufacturer, ergonomic and easy to use concept. Super balanced and easy to flip (remove / insert operation) to be used or flip on Left or Right Hands per need. I have to admit was not easy to find the good dimension compromise to satisfy so many different Heli linkage design, but we believe that our design, delivery an incredible versatility. We use special Zero Slop Radial Bearing Pivot System to assure the smooth and clamp precision never saw before is a similar Tool... 7075 T6 Alloy Aluminum for the best rigidity and light weight design. Interchangeable Carbon Steel Tips with dedicated asymmetrical geometry to entry everywhere a plastic linkage need be removed / install.
Material: This is a high precision CNC part made from 7075 T6 Aluminum, with Carbon Steel Tips. Matte Black Anodize Color Finish with High Resolution Laser Engraving.
SPECIFICATIONS: - Solid and durable materials construction. - Ergonomically Design works perfectly on right / left hands need. - Precise (no play) Ball Bearing Pivot System. - Designed for 5 to 5.5mm diameters Linkages - Interchangeable Carbon Steel Tips. - Super Light, Professional and Durable. - Special N.A.P.O.S.C. Design Concept (Joe Herison – USA Intellectual Property)
PACKING LIST: 1 x CNC Ball Link Pliers - 5 to 5.5mm – Black Matte Finish. |
€44.99
Inc. VATLynx Heli CNC Ball Link Pliers Tips - 5 to 5.5mm #LX3066
a replacement set for Lynx Heli CNC Ball Link Pliers( LX3065 ) |
€22.60
Inc. VATProp Balancer
Quick, easy and inexpensive propeller balancer. Perfect for quick, accurate balancing at home or even at the field Fingertip Propeller Balancer 1 pc. |
€6.00
Inc. VATWrench Double End Universal Spanner Open End Wrench 3-4mm
Item name: Double End wrench Titanium COLOR |