E-flite Blade

BLH3207 Carbon Fiber Main Shaft With Collar Blade MSRX Parts

Description:
- Precision CNC Aluminum Main Rotor Hub.
- All optimized for weight and durability.

Usage:
- Use for Blade 200SRX.

Weight:
- Stock Plastic Main Rotor Hub Set: 1.5(g).
- CNC Aluminum Main Rotor Hub Set: 1.4(g). Lighter weight than Stock: 0.1(g) .

Included:
- CNC AL Main Rotor Hub (1-set).

Complete Red Canopy with Vertical Fin: mCP X

E-Flite Blade 200 SR-X Canopy Mount Set (2 pcs)

E-Flite Blade 200 SR-X Complete Hardware Set

Blade 200 SR-X Main Blade Set White (2 pcs)

E-Flite Blade 200 SR-X Main Shaft w/ Retaining Collar

E-Flite Blade 200 SR-X Main Rotor Hub w/ Hardware

E-Flite Blade 200 SR-X Main Shaft w/ Retaining Collar

E-Flite Blade 200 SR-X Pushrod Set (2pcs)

E-Flite Blade 200 SR-X Rotor Head Linkage Set (4pcs)

Blade 200 SR-X Spindle Set

E-Flite Blade 200 SR-X Swashplate

E-Flite Blade 200 SR-X Tail Boom Support Set (2pcs)

E-Flite Blade 200 SR-X Tail Case

E-Flite Blade 200 SR-X Tail Motor

E-Flite Blade 200 SR-X Tail Rotor Hub Set

E-flite High Current UMX 1S USB LiPo Charger

This replacement E-flite High Current UMX 1S USB LiPo Charger comes standard with the Nano QX2 FPV quadcopter and conveniently charges the QX2 1S LiPo battery from a 5V USB outlet/port.
Standard features include LED status indicator.

Specifications:

• DC Input: 5.0V/500mA
• DC Output: 4.2V/500mA

 Elevator Control Lever Set for B450, B400

Fast Flight Main Rotor Blade Set w/Hardware: mCP X

 Fast-Flight Main Rotor Blade Set w/Hdwe for Blade mCP X BL

Feathering Spindle with/O-rings and Bushings: BMSR

Feathering Spindle w/O-Rings,Bushings, mCP X BL

 Flanged Bearing 2x5x2.5 (2pcs) for Blade 500 3D/X

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 Hardware Set for Blade mCP X BL

Landing Gear w/ Hardware

Blade 180 QX Parts

Landing Skid and Battery Mount Set: BMCX/2

 Linkage Rod/Pushrod set: B450 3D, B400

Lynx Heli Innovations 130 X Tail Grip Set Red Devil Edition 2pcs

Lynx Heli Innovations has redesigned the standard 130 X plastic tail grip, using aluminum alloy.
Our tail grip are weighted with integrated CNC weigh, positioned very close the tail shaft rotation center.
Micro helicopter upgrades can be a trap – often they look nice but do little for function, and only add weight, in particular micro helicopters tail components, were smaller weight difference  can made huge difference in final performance.
We spent hours optimizing the design to achieve the required strength with a final weight beyond compromise. We are pilots, we expect form our upgrade a better performance.
After many flights, we decided on a single 4x1.5x2 radial bearing design. Simple, lightweight and durable. Only 0.35g each grip assembled, with a huge increase in tail precision and strength.
The counter couple weights are sized to reduce the servo load during fly, giving faster tail response, less vibration and increase tail servo longevity.
The details and design of these tail grips add top performance in your 130X tail system.
TIPS FOR THE BEST PERFORMANCE:
Tail grip are weighted and have better performance compare the std one. Reduce 2 or 3 steep tail gyro gain to compensate Lynx tail grip efficiency.

FEATURES:

• Direct replacement for the standard 130 X tail parts.
• Increase tail response and reduce vibration.
• Preassembled with lock thread linkage balls and lubricated bearing
• SST linkage balls to assure durability and wear resistance
• Integrated CNC counter balace weight to reduce servo load during fly maneuvers, giving faster tail response, less vibration and increase tail servo longevity.
• FEA (Final Elements Analysis) design assisted, achieve lightweight and maximum strength.

TECHNICAL SPECIFICATION:

• Tail Grip material: Aluminum 7075-T6 – red anodized finish.
• Bearing Material: SST – ABEC5
• Linkage Ball Material: SST
• Assembly weight: 0.7g (the couple)
• PACKING LIST:
• 2 x 130 X – CNC Tail Grips factory assembly

Main Blade Grips w/Bearings: nCP X/CP S