Connectors & Cables

JST connectors set Male+Female 170mm. Good for up to 10 amps.

This new item is the Kontronik Anti Spark Connector 5.5mm which is supplied as two pairs of connectors to be used as a pair on a battery and a pair on your ESC.
One of the female bullets includes 3 flat resistors which will reduce or even completely eliminate sparking while connecting the batteries to the ESC
The complete package includes 2 male and 2 female connectors along with red and black heatshrink in various sizes.

Lipo Balance male-male EXTENSION Connector XH 6s, 30cm

its made with wire 22AWG

 Deans-T type male to XT60 female adapter.

This adapter is very helpful when you need to connect heterogeneous connectors

Male to male Patch cable adaptor, fits All Flybarless systems, Data port , connecting a Futaba S.Bus receiver .Gold plated Futaba connectors

Length+-10cm

0.35mm wire, Brown,Red,Orange

Set of 1

Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to iPhone / iPad when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and the lighning end is used with iPhone /Tablet, it support IOS 7,8,9,10, fit for iPhone X / 8 / 7 / 7/ 6 / 5 / SE, iPad / iPad Air / iPad Mini and etc
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

Connector: Micro USB to Lightning ( for iPhone / iPad )
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 40 jumper wires in an assortment of colors. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic circuits. They feature connectors at each end which easily attach to the breadboard, connector or equipment, without the need for soldering. Connections are therefore easy to change and move about the breadboard, which is essential during your prototyping phase.
Each wire measures 15cm long and each pack contains 40 different colored wires to make it really easy to identify them. There are 3 different packs available with different connector options, please refer to the information below for details.

• Pack of 40
• Assortment of colors
• 15cm long (each wire)
• Perfect for prototyping and education

2P Female connector Thin - mini JST, 23cm long

The MR30 ensures a solid high-amp connection, perfect for applications up to 30A constant.

Features

• Lightweight
• Short circuit protection
• Specifications
• Brand Name: Amass
• Item Name: MR30 connector
• Body Material and Surface Plating: Brass and gold plated
• Insulation Material: PA66
• Original Internal Resistance: 0.8MΩ
• 500 Times Internal Resistance: 0.85MΩ
• Max. Continuous Current: 30A (within 30 minutes)
• Max. Instantaneous Current: 40A (within 1 minute)
• Recommended Cable Spec: 18AWG 2.8mm diameter
• Recommended Soldering Spec: 400° C/3S
• Weight: 1.2g/pcs
• Insulation Degree: UL94V-0
• Machine live: 3000 Times
• Suitable for connecting ESCs, Motors, RC Airplanes

MT60 3.5mm 3-pin Motor connector set.

Made from high-temp Nylon and 3.5mm gold plated spring connectors.

Includes:

• 1x male connector
• 1x female connector
• 2 x wire guiding sleeves

Multiplex Power Plug, 6 pin, Set include: 1 x Male+Female

The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs Walkera, Hubsan.. 1s Lipo
Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Walkera, Hubsan 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

This is a set of Special High current connectors with Anti spark adding 4 Pins FOR DATA or misc connection, e.g temp sensor, data, and more.

those are 8mm connector with special Antispark device installed so even with huge power applications  you will avoid Sparks.

Connectors are Gold plated to avoid corrosion and allow perfect conduct.

Possible to buy as 1 set or set of 8 (cost saving)

Color is black

1 set including Male, 1 Female, 1 rubber protection housing

Specification:

• Connector Housing: nylon with fiber.
• 8mm Anti-spark with 5.1 ohm
• Banana material: gold plating brass
• set Weight: 36g
• Under highest temperature: 200 degree
• Biggest wire: 6AWG
• Current: 120A~200A

This is a pack of QS10P Anti-Spark Connectors. Designed to handle some of the most demanding conditions, these QS10P connectors offer incredible current handling and are perfect for high voltage applications. The anti-spark design eliminates the dreaded "pop" when plugging in high voltage batteries along with helping to extend the life of your connectors.

Utilizing a 10mm gold plated brass bullet style connection these QS10P connectors are built for your high current needs. Upgrade your build with a worry free, high current handling, performance battery connection with these QS10P Anti-Spark connectors

Features:

• Anti-Spark Technology
• High Current and High Voltage Capability
• Large 10mm Gold Plated Brass Bullet Connectors

Specifications:

• Flame Retardant Rating: UL94VO
• Contact Resistance: 0.51m
• Rated Voltage: DC 750W (500V)
• Peak Current: 240A
• Constant Current: 180A
• Temperature Range: -30c to 150c
• Material: PA
• Maximum Wire Size: 4-10 AWG

Includes:

• (1) Male QS10P Anti-Spark Connector
• (1) Female QS10P Anti-Spark Connector
• (2) Connector Covers
  

Item Name: Anti spark Connector
Item NO.: QS5-3p
Color: Black
Diameter: 5.00mm
Pins: 3P
Metal Material: Gold Plated Brass
Plastic Material: PA66
Max Current: 40A
Instantaneous Current: 90A
Voltage: up to 300V
Weight: 22.1g
Usage: for UAV, intelli Battery, Charger, RC Drones Boats Mower Electric Car ect.

Features:
- This gold plated bullet connector has an anti spark protection
- These are a must for high current/high voltage brushless power systems with intelli batteries, for telemetry or signals
- Sold in pairs Male & Female.

Package Included:
1 x Male Connector
1 x Female Connector

QS8 Anti-Spark Connectors are a high quality, high current connector that is perfect for high voltage applications. Not only is the connector capable of handling spikes in excess of 300 amps, the design provides an anti-spark connection that eliminates the dreaded POP when you plug in the battery helping to extend the life of the connector. High voltage bashers, speed run enthusiasts and pilots of all disciplines can benefit from this advanced connector technology.

The QS8 connector features 8mm bullets that can accommodate wire up to 6awg, inside a heavy duty nylon/fiber composite housing. Plus, an included plastic wire cap covers the soldered connection and eliminates the need for heat shrink to create an incredibly clean installation that works well, looks great and is easy to manage.

NOTE: T-style connector shown in photos is for size reference only, and is not included.

Features:

• Anti-Spark Technology Increases Lifespan of Connector
• 110A Constant/300A Peak Current Rating
• 8.0mm Gold Plated Brass Bullet
• Great for all High Voltage Applications
• Nylon/Fiber Composite Housing
• Package Includes One Female Connector, One Male Connector & End Cap

Specifications:

• Connector Diameter: 8.00mm
• Metal Material: Gold Plated Brass
• Plastic Material: Fiber Nylon Comp
• Flame retardant rating: UL94 V0
• Temperature Range: 200C Max
• Rated Voltage: 600V DC
• Continuous Current: 110A
• Peak Current: 300A+
• Weight: 41g (Male+Female Set)
• Total Length: Approx 70mm (Male & Female w/End Cap)
• Width: 29.5mm
• Max Wire Gauge: 6awg

Includes:

• (1) QS8 Female Anti-Spark Connector
• (1) QS8 Male Antispark connector
• (2) Connector Covers
• (2) Wire Caps ( rubber protection)

RCPROPLUS 6mm REB 6808 S.T. S6 P8 Solderless connectors 8 pair/ Supra X Battery Connector Set (4 Sets)

RC Pro Plus has been at the forefront of battery connector development for years. Providing high quality, and high reliability, RCPP has quickly became a leader within the industry.

Meet the "REB 6808 S6 S.T" aka S6 Solderless connectors! Solderless? Absolutely! Solderless connections are more commonly found in applications outside the R/C industry, and inherently provide lower point of fatigue within the connection.

The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes. With the bare wires exposed, each bullet connector utilizes 2 setscrews (180 degrees apart), to create a secure mechanical connection.

Features:

Use with batteries, speed controllers and chargers

Solderless - Full mechanical connection

Large, low resistance contact patch

'Click' connection

Hassle free assembly

Specifications:

• Peak Current: 240A
• Continue Current: 200A
• Applicable Wire: 8AWG
• Finish Type: 24K Gold Plated 5u"

Meet the "REB 8806 S.T" aka S7 Solderless connetors! Solderless? Absolutely! Solderless connections are more commonly found in applications outside the R/C industry, and inherently provide lower point of fatigue within the connection.

The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes. With the bare wires exposed, each bulle

The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes.
With the bare wires exposed, each bullet connector utilizes 2 setscrews (180 degrees apart), to create a secure mechanical connection.

Solderless Connectors for the connection between ESC and Battery, Charge Lead etc.

Peak Current : 320A
Continuous Current : 260A
Applicable Wire : 6-8 AWG
24K Gold Plated 5u"/Packing : 3 Set/6 Pair (T:6M+6F)

The RC Pro Plus S8 "Solderless" Supra X Battery Connector continues to push RCPP to the forefront of battery connector development. Providing high quality, and high reliability, RCPP has quickly became a leader within the industry. Solderless connectors? Absolutely! Solderless connections are commonly found in high current applications outside the R/C industry, and inherently provide lower point of fatigue within the connection.

The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes. With the bare wires exposed, each bullet connector utilizes one setscrew to create a secure mechanical connection.

Features:

• Use with batteries, speed controllers and chargers
• Recessed plug cavity and solder windows
• Large, low resistance contact patch
• 'Click' connection
• Hassle free assembly
  
  Specifications:
  
• Peak Current: 310A
• Continue Current: 270A
• Applicable Wire: 6 Awg
• Finish Type: 24K Gold Plated 5u"

RCPROPLUS Battery Safety Cap Pro D5/S5 SET OF 8 PCS

RCPROPLUS Battery Safety Cap Pro S7 set of 8pcs

RCPROPLUS Battery Safety Cap w/Flag Pro D5/S5 4PCS

RCPROPLUS Battery Safety Cap w/Flag S7 ,set of 4 pcs

RCPROPLUS Battery Safety Cap with Flag Pro S8 (4 pcs) #RCA1988F

RCPROPLUS High performance Servo connector Leads set DIY assembly pack

RCProPlus Premium Heavy Duty Servo Wire (10 Metres)

RCPROPLUS Pro D6 & S6 Connector Safety Cap with flag, set of 4

RCPROPLUS Pro-D5 Supra X Battery Connector Set. Featuring a unique patented banana plug lock design, these Pro-D5 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.

These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.

Features:

Patented lock design eliminates separation
Use with batteries, speed controllers and chargers
Recessed plug cavity and solder windows
Large, low resistance contact patch
Hassle free assembly
Specifications:
Peak Current: 140A
Continue Current: 100A
Applicable Wire: 10~12AWG
Finish Type: 24K Gold Plated

Bag contains- 8 PAIRS,(4 Sets) (10~12AWG)

RCPROPLUS Pro-S6 Supra X Battery Connector (4 Sets) (8~10AWG)

This is a pack of six RCPROPLUS Pro-S6 Supra X Battery Connectors.
This set includes four male and four female black and red polarized connectors, as well as eight male and eight female bullet connectors and necessary hardware.
These connectors are a great solution for your high current and high voltage demands and are very similar to the PRO-X6 connectors, with the exception these lack the screw-on base and are square, not triangular.
The Pro-X6 connectors offer a large, low resistance surface patch for efficient power transfer, with a connector design that conceals all internals from outside exposure without the use of heat shrink.
Also, when the male and female ends are connected together, they ‘click’, letting you know they’re tightly joined and ready to perform.
In addition, the 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free.  

Specification:

• Applicable Wire     08~10AWG
• Peak Current     260A
• Continue Current     220A
• Max.Volt Rating D/AC     100V
• Contact resistance     0.38m Ohm
• Raw Material     C36 Series
• Standrad Packing     P8 (4 Set 8Pair)

RCPROPLUS RAS 6808 S.T. D6 (Right Angle Socket)

Working DC Max.60 Voltage
Peak Current(A):280
Continue Current(A):240
Can be Applied Simultaneously with REB 6808 Pro D6/DC6/S6(Solder Type)REB 6808 S.T. D6/DC6/S6(Solder-less)

 6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair,(10M,10F)

These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together. Excellent for motors, ESC's, batteries, power-meters and chargers.

Features:

• High voltage
• High current
• Large surface contact
• Recessed wire cavity
• Solder window
• Positive "Click" when pushed together

Specs:

• Peak current: 240A
• Continuous current: 200A
• Suits wire: 8 ~ 10AWG
• Finish: 24K Gold Plated 3 microns
• Quantity: 3 male / 3 female connectors

This is a pack of four RCPROPLUS Pro-X6 Supra X Battery Connector. This set includes four male and four female black and red polarized connectors, as well as four male and four female bullet connectors.

Set including 3 sets, 6 Male+6 Female

These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The connectors also feature a base that screws onto the connector housing keeping all wires concealed, eliminating the need for heat shrink. Also, when the male and female ends are connected together, they ‘click’, letting you know they’re tightly joined and ready to perform.
In addition, the 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free.

Features:

•   Screw-on base eliminating any need for heat wrap
•   Use with batteries, speed controllers and chargers
•   Recessed plug cavity and solder windows
•   Large, low resistance contact patch
•   'Click' connection
•   Hassle free assembly

Specifications:

• Peak Current: 240A
• Continue Current: 200A
• Applicable Wire: 8~10AWG
• Finish Type: 24K Gold Plated 3u

This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector

Set including 8 PAIRS.

Featuring a unique patented banana plug lock design, these Pro-D6 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.

These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.

Cover material:IDEMITSU plastic
Banana connector diameter:6mm
Suggested Wires:8AWG-10AWG
Capacity (Continuous):200A
Capacity (Burst):240A
Banana connector material:Class A Cooper C54 Series
Plating:24K Gold / Flash

Features:
Connection between battery and ESC
Can be used for 4 batteries and 4 ESCs (or 4 charger cables)

Package Included:
4 x Set
8 x 6mm Female& Male Bullet Connector

RCPROPLUS REB 7808 New Anti-Spark (Solder-less Type) Connector Add on

Add A Anti-Spark Connector to your Current Electrical “Negative” Circuit ,only

Specifications:

• Peak Current: 320A
• Continue current: 280A
• Application Wire: 08 AWG
• Packing-Male x2 + F( Antispark) x 2