AVIZAR

Made from Stainless steel A2 Hardened 

Pack of 2 screws

Size DIN 912 M3.5 X 10

Made from Stainless steel A2 Hardened 

Pack of 2 screws

Size DIN 912 M3.5 X 12

DIN912 A2 Hex Cap Screw M3.5*14mm, 2 pcs in set, Black Color

Pack of 2 screws

Size DIN 912 M3.5 X 14

Made from Stainless steel A2 Hardened 

Pack of 2 screws

Size DIN 912 M3.5 X 16

DIN912 A2 Hex Cap Screw M3.5*16mm, 2 pcs in set , Black color

Pack of 2 screws

Size DIN 912 M3.5 X 16

DIN912 A2 Hex Cap Screw M3.5*18mm, 2 pcs in set , Black color

Pack of 2 screws

Size DIN 912 M3.5 X 18

Made from Stainless steel A2 Hardened 

Pack of 2 screws

Size DIN 912 M3.5 X 20

Made from Stainless steel A2 Hardened 

Pack of 2 screws

Size DIN 912 M3.5 X 8

Direct Drive 5X3 Propeller - 2 Blade (Set of 2 PROPS)

Please note that differ from Airplanes, Multicopter props are different in way they are defined. so when looking from the front to the back of airplane- this prop is CCW.

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive 5X3 Propeller Green color- 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive 5X3 Propeller  Orange color- 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

 Direct Drive 5X4 Propeller - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive 5X4 Propeller Green color- 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive 5X4 Propeller  Orange color- 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x props CW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive pusher 5X3 Propeller - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive Pusher props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x PUSHER props CCW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive pusher 5X3 Propeller , Orange - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive Pusher props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x PUSHER props CCW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive pusher 5X3 Propeller , Green - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive Pusher props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x PUSHER props CCW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive pusher 5X4 Propeller - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive Pusher props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x PUSHER props CCW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

Direct Drive pusher 5X4 Propeller , Green - 2 Blade (Set of 2 PROPS)

Contains 2 Direct Drive Pusher props, 2 blade style with a 5mm center hub. They come with a set of plastic reducers for smaller shafts
A good prop for small planes and multi-rotors.

Includes

  2 x PUSHER props CCW
  2 x sets of prop reducers

These are commonly used on smaller, high KV motors, such as 1804, 1806 size 1800-2800kv motors or similar.

9 x 4.3 Self Tightening Carbon Fiber Propellers for DJI Phantom 2,3,Vision (L/H & R/H Rotation).

Well made self tightening carbon fiber replacement propellers for the DJI Phantom versions, improve the performance of your Phantom with these more efficient propellers.

Specifications

Delivered as set of 2, (CCW+CW)

• Diameter: 9
• Pitch: 4.3in
• Mounting Thread: 6mm
• Weight: 12.3g per blade
• Rotation: 1 each L/H and R/H
• Material:Carbon

DJI INSPIRE 1 Battery Parallel Charging Board ,charge up to 3 packs.This battery charger board for dji phantom 3 can suit 15A charger adapter.

Rapid Multi-battery charge plate adaptor, up to 3 batteries charge at same time!
Compatible with TB47 (4500mAh) & TB48 (5700mAh) Battery
Support Original charger and the third party adapter!

Package Includes:

1 x Charger Board (Charger & Battery not included)

Charging Hub for DJI Mavic Pro with 4 Inputs.

NOTE:  4 Cables Included

DJI Mavic Pro Aluminum-Alloy Foldable Extender 4-12 Inches Tablet Stand Holder, Snap On / Off Bracket for Mavic Remote Controller

Feature:

• Aviation Aluminum-Alloy Material Made.
• CNC technology.
• High Quality design and Perfect fit with DJI Mavic Pro Remote Controller.
• 120mm-190mm wide support 4-12 inch phone & Tablet, 45 degrees to up and down support a clean view, Tighten & Stable.
• Foldable and Iphone sized.Light weight, only about 227g.
• Convenience to carry outside with other mavic accessories together.
• Just need 2 step to snap on / off with no tools.
• Support Tablet Sunshade & Hanging lanyard.

8330 Quick Release Folding Propellers for DJI Mavic Pro

Easy-to-fold, powerful thrust, well balanced.
Push type design, easy to mount, secure and durable.
Foldable and light
Push type design allows for quick mounting and detaching.

Dimensions: 21.1 × 7.6 cm
Included: 1x Pair of Propellers

DJI Mavic Pro Accessories Tablet Phone Mount Holder for Remote Controller,Extended 4-12 Inches iPhone iPad Stand Holder,360 Degree Rotating - Black

COMPATIBLE:Perfect design for DJI Mavic Pro
FOLDABLE:Easy to fold and carry.Meantime the whole set of support bracket is easy to install and remove.
PORTABLE:Light weight,only about 195g,Convenience to carry outside with other mavic accessories together.
PROTECTED:There pasted sponge pads on the clamps for good protections.Sponge can protect the edges of the phone and tablet.
STRETCHABLE:120mm-190mm wide support 4-12 inch phone & Tablet ,45 degrees to up and down support a clean view,Tighten & Stable,Will stay in the place you need.

DJI Phantom 2 Vision Quadcopter Rapid Multi Battery Parallel Charger Board Plate

Battery Parallel Charger Board Color: Black Support Phantom 2 vision three batteries charging at the same time. Support DJI Original adapter Support the third party adapter Support three batteries charging Notes

and Function Support the third party adapter. (If you do not use the original charger or our standard 15A power adapter,your voltage must be 12.6V,or the battery charge will be discontent) If you use the third party charger and the current

greater than 6A,do not charge a single battery charge,otherwise there will be problems. Do not move the charging plate during charging,away from the water. If only charge a battery,put it in the battery jay 1. If the original adapter and LED

lights are not lit,please adjustments to ensure good contact with the power supply. Use our match 15A adapter,only need 2 hours while charging three batteries. Package not included DJI Original charge.

Notes:

1. For original 2.0 charger:

Default charge battery one by one,if you want 3 batteries charged together, please open battery switch one by one(short press+long press,Same as power on for Quadcopter)

2. For the third party charger:

The Voltage must be at least 12.6V,Otherwise the battery won't be full filled.
If your charger electric current >6A, DO NOT charge only one battery,it will lead to battery damaged!
If your charger electric current <5A and need charge only one battery,put the battery on the first socket close to the LED Light.

3. Charger plate LED light on means power is ready,

Battery under charging:Battery light-on,
Battery full charged:Battery light-off.

Attention: Never move the charger plate during charging! If loose connection,please cut-off power and re-adjust battery untill. Do not drop this plate in fire or close to water,it is dangerous!

Package included:

1 x Battery Parallel Charger Board, Charger not included

DJI Phantom 3 Battery Parallel Charging Board ,charge up to 3 packs.This battery charger board for dji phantom 3 can suit 15A charger adapter.

Drone Landing Pad 110 cm is an easy to take along landing place for your drone or quadcopter. The Landing Pad has a diameter of 110 centimeters and is easy to attach to the surface thanks to the three pegs supplied. This means you always have access to a landing site if the normal surface is not sufficient. In addition, you also do not suffer from grass or pebbles between the propellers when ascending or descending. The Landing Pad has a bright orange color on one side and a bright blue color on the other side, so you always have an eye-catching landing site.

Main features of the Drone Landing Pad 110 cm:

Landing site for drone or quadcopter
Diameter of 110 centimeters
Remains well thanks to the supplied pegs
Always visible through two color surfaces
Easy to carry
Collapsible to 45 centimeters
Weighs 500 grams

Specifications:

• Landing Pad
• Protective case
• Plastic Pegs
• Stickers

Dual BEC Output 5V 12V Adjustable Voltage Distribution Board

• 5V 12V Adjustable Voltage Dual BEC Output Board ESC Distribution Connection Board for FPV
• Distribution board with two-way BEC output is made of thickened copper foil and turmeric processed on the surface and supporting 100A current.
• Directly poweing a Brushless Gimbal, 5.8G TX & RX system or FPV camera from  12V BEC, while 5V BEC can provide power for Flight control
• 1CH 12V output, 1CH adjustable, support 3-20V adjustable
• Each BEC support 2A stabilized output

Note: Before use BEC output port, please measure the real output voltage first, make sure it meet your requirements. Delivered as 5V output as default

The Boscam RD945 is  one of the best FPV receivers on the market and now it has been made even better thanks to its recent upgrade, which provided an additional 8 channels to make it RaceBand compatible. Note that it still offers all of the 32 traditional FPV channels, so it's fully compatible with other 5.8Ghz gear on the market including Fatshark & ImmersionRC gear.

In addition to the RD945's wide range of frequencies, it also boasts many other features including, a true 40 channel diversity receiver with dual AV outputs which can be used to feed a monitor or goggles; auto channel search at the push of a button, and a clear LCD display that shows band/channel and the actual frequency number. It also supports a wide input voltage range 6-28v making it compatible with most power sources, including LiPo batteries. Finally, we're also impressed with the construction of the RD945. The Rx is contained within a durable metal case, which also acts to shield the receiver increasing its sensitivity.

Why do I need a diversity reciever?

A diversity receiver is essentially two receivers all in one. In essence, it allows you two mix and match antennas for a solid video link. So it might be that you select a circular polarised omnidirectional antenna, which will provide good reception in all directions in the near field, and a directional high gain patch antenna for long distance flights. The diversity receiver is clever in that it will seamlessly switch between the receiver with the strongest signal.

What is RaceBand?

RaceBand was first pioneered by ImmersionRC to allow more pilots to race together without interferance. Essentially, RaceBand is just another set of 5.8Ghz frequencies, to be specific they are: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917. The difference between the RaceBand and the other 5.8Ghz bands is that RaceBand frequencies are more spread out across its band (37mhz separation) thus allowing more pilots to fly FPV together without their video feeds causing interference with each others.

Note that many shops are still selling the the old FR632 32-channel version, which does not support RaceBand.

Features:

•     48 channels / 6 Bands - includes Race Band channels compatible with Fatshark & ImmersionRC gear
•     Auto channel scan and lock on
•     True 5.8GHz 32CH diversity system with indicator
•     Dual buffered AV output for DVR or second monitor
•     LCD display, frequency and channel synchronous display
•     Power off channel memory

RECEIVER Frequency:

    FR1 to FR6 Bands
 

For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA), see 'related products' below.

Dynam Tomcat servo
For RC Plane Airplane Aircraft Helicopter
RC hobby
Detrum 3.7g Servo
DY-1100 Servo

PUSHROD EASY EZ-CONNECTOR made from stainless steel for 2.1mm, 10pcs

Set including 10 complete connectors.
Made in korea

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: colorless
• Filing gap- up to 10mm
• Bonding time: 55min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

Technical data:
Curing time (25 °C): 210 minutes
Bonding time: 15-25min
Handling strength (23 °C)**: 4 hours
Viscosity: 100,000 to 150,000 MPas
Maximum gap fill: 8 mm
Colour: Dark grey
Elongation at break: 6%.
Heat deflection temperature: 24 h / 23 °C = 60 °C; 2 h / 80 °C = 85 °C
Flexural strength: 90 MPa
Bending modulus: 2200 MPa
Tensile strength: 54 MPa
Compressive strength: 70 %.

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

• Color: Black
• Filing gap- up to 20mm
• Bonding time: 15 min
• Curing time: 150 min
• Pack of 50ml, with 1 mixing tube

Bonding gun (Dispence gun) Not included  

The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

High lap shear strength (up to 39 MPa with CFK cured 2 h over 80 °C according to ASTM D 1002)

Very high impact and peel strength

Good thermal resistance

Thixotropic formulation

Low exothermic reaction and shrinkage

Solvent free

Processing is very easy due to the application with a dosing gun. This also eliminates mixing errors. Elan-tech® ADH 891.892 NF cures at room temperature or elevated temperatures. Post-curing at elevated temperatures is required to achieve maximum temperature resistance.

• Color: Biege
• Filing gap- up to 10mm
• Bonding time: 20 min
• Curing time: 100 min
• Pack of 50ml, with 1 mixing tube

Delivery scope: 50Ml package, with 1 mixing Tube

We recommending to use the Bonding gun (Dispence gun) , Sku is ELIX15138, please order it separately.