AVIZAR

Page of 17
Balance 2S connector Female- Battery side (JST-XH) 2 pair

Balance 2S connector Female- Battery side (JST-XH) 2 pair

JST-XH 2s Lipo Balance Connector Female

Set of 2

€3.00

Inc. VAT
Quantity
Ball bearing Shims 10x16x1  / 10x16x0.3 / 12x18x0.3 set of 10

Ball bearing Shims 10x16x1 / 10x16x0.3 / 12x18x0.3 set of 10

Those are special bearing Shims with Unique sizes to allow ball bearing clearance (set of 10pcs)

Ball-Bearing shim rings serve to compensate for tolerances of bearing components without any other further mechanical reworking.

Also to use friction free between bearing and housing.

Choose size :

10x16x1 
10x16x0.3
12x18x0.3

€6.00

Inc. VAT
Quantity
Ball bearing stainless Shims 20x24x0.5mm, set of 5

Ball bearing stainless Shims 20x24x0.5mm, set of 5

Ball bearing stainless Shims 20x24x0.5mm, set of 5

Preloading your ball bearing system eliminates the extra clearance between the inner race and outer race of the bearing, allowing for smoother mechanical operation. Excessive or insufficient preload, however, can cause more damage than good.

Inner race and outer race bearing shims come in varying thicknesses to help you achieve the right amount of axial preload for your bearings. When installed correctly, bearings shaft shims help prevent misalignment, reduce noise and vibration, improve system rigidity, and extend bearing life. A versatile design also allows use as shaft spacers to align and adjust the spacing between two components.

€6.00

Inc. VAT
Quantity
Bidirectional CNC Hand Fuel Pump H20 High Flow Metal Gears Nitro, Gas, Kerosine

Bidirectional CNC Hand Fuel Pump H20 High Flow Metal Gears Nitro, Gas, Kerosine

The H20 hand pump is made of cnc aluminum with Metal Gears, and delivers about 200ml at 10 revolutions.

The pump using Metal gears, therefore very precise and will work long term.

Fits :

  •  petrol, kerosene, smoke oil, methanol (Nitro fuel)

Included in the set

  • Fuel pump
  • Adapter fuel
  • Fuel filter- Clunk
  • nitro fuel Line
  • Spare Gasket

€49.50

Inc. VAT
Quantity
Black Cross Hex Socket Spanner 5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

Black Cross Hex Socket Spanner 5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are :5.5, 7, 8, 10 M3 M4 M5 M6 Nuts

€5.00

Inc. VAT
Quantity
Black Double Sided Tape 20mm x1m, 3mm thick

Black Double Sided Tape 20mm x1m, 3mm thick

3mm Thick Black Double Sided Foam Tape 20mm x 1 Meter. 

Excellent vibrations absorber. Glue on gyros, FBL units, and more.
This is a strong, general purpose foam tape coated on both sides with an adhesive that will perform in both internal & external applications.

The foam is a high quality polyolefin coated with a high tack acrylic adhesive.
This tape has been designed as an economic solution for your adhesive foam tape requirements.

€3.00

Inc. VAT
Quantity
Blade 130X -UMX battery connector

Blade 130X -UMX battery connector

Blade 130/ UMX battery connector, Make your own battery.

supplied with silicone cable 10cm

€3.00

Inc. VAT
Quantity
Blade Balancer for Helicopter blades, Propellers (complete set)

Blade Balancer for Helicopter blades, Propellers (complete set)

This superb quality universal blade balancer uses a precision machine alloy center beam supported by twin sealed ball races.

Compatible with : Multicopter fixed-wing propellers 250-700 airplanes.

Hole Diameter 2~5mm fixed-wing.

Maglev-method was adopted on the center fixing axis to balance the tested products with zero resistance.

Helicopter blades with Hole screw from 2-5MM,

€23.00

Inc. VAT
Quantity
Brushless gimbal Controller

Brushless gimbal Controller

The gimbal supported 2-Axis brushless motors and is adjustable, so it can be balanced perfectly.

This is an OPEN SOURCE Project.

 Hardware Features:

  •   ATMega328P microcontroller
  •   Onboard FT232RL for debug
  •   2~6 cells lipo input
  •   3 Channels input
  •   Multiport
  •   UART Port
  •   MPU6050 6 axis gyro/accel with Motion Processing Unit
  •   On board logic level converter

 Other

  •   Dimension: 50mmx50mm
  •   Weight: 25g(include IMU board)

Package content

  •   Brushless Gimbal Controller x 1
  •   IMU board x1
  •   5Pin cable 300mm x1

 

€79.00

Inc. VAT
Quantity
Button Head Hex screw ISO 7380-1 A4 TX M4x6 , 10 pcs

Button Head Hex screw ISO 7380-1 A4 TX M4x6 , 10 pcs

Button Head Hex screw ISO 7380-1 A4 TX M4x6

set of 10 pcs

€2.50

Inc. VAT
Quantity
Button Head Hex screw M3x10 (10 pcs)

Button Head Hex screw M3x10 (10 pcs)

Button Head Hex screw M3x10 (10 pcs)

€2.50

Inc. VAT
Quantity
Button Head Hex screw M3x12 (10 pcs)

Button Head Hex screw M3x12 (10 pcs)

Button Head Hex screw M3x12 (10 pcs)

€2.50

Inc. VAT
Quantity
Button Head Hex screw M3x16 (10 pcs)

Button Head Hex screw M3x16 (10 pcs)

Button Head Hex screw M3x16 (10 pcs)

€3.00

Inc. VAT
Quantity
Button Head Hex screw M3x20 (10 pcs)

Button Head Hex screw M3x20 (10 pcs)

Button Head Hex screw M3x20 (10 pcs)

€3.00

Inc. VAT
Quantity
Button Head Hex screw M3x25 (10 pcs)

Button Head Hex screw M3x25 (10 pcs)

Button Head Hex screw M3x25 (10 pcs)

€3.50

Inc. VAT
Quantity
Buzzer for Pixhawk PX4

Buzzer for Pixhawk PX4

This buzzer is used with Pixhawk and PX4 autopilot to annunciate status tones. The buzzer includes a two-position DF14 connector on one side that plugs directly into the Pixhawk or PX4 FMU board.

  • Connector: DF13 Plug
  • Wire length: 190mm
  • Size: Dia 30mm

€6.90

Inc. VAT
Quantity
Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 5mm

Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 5mm

Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 5mm
Diameter of 7mm allows to pass safely silicone line/tygon or some wiring

Arrange your cabling nicely across the helicopter
Including a Pack of 10

€6.00

Inc. VAT
Quantity
Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 7mm

Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 7mm

Cable - Fuel line Mounting Clamps pack of 10 for fuel line or wires up to 7mm
Diameter of 7mm allows to pass safely silicone line/tygon or some wiring

Arrange your cabling nicely across the helicopter
Including a Pack of 10

€6.00

Inc. VAT
Quantity
CamOne Infinity 142⁰ Lens

CamOne Infinity 142⁰ Lens

FlyCamOne Infinity 142⁰ Lens
Specification: Dimensions: 2 x 1.8 cm / 0.78 x 0.70" Weight: 10 g / 0.35 oz

€32.00

Inc. VAT
Quantity
Canopy Egde protection U channerl Rubber strip, 1m

Canopy Egde protection U channerl Rubber strip, 1m

Protect your canopy edges, or use it as wire protection against carbon frames, use it combined with fuel tanks.. and much more.
this Strip including U shape EPDM. the profile is U shape and its 1.2mm wall thick, fits perfectly 1-2 mm frames.

See images for exact dimensions and sizes.

 

€3.00

Inc. VAT
Quantity
Canopy Egde protection U channerl Rubber strip,Round 1m

Canopy Egde protection U channerl Rubber strip,Round 1m

Protect your canopy edges, or use it as wire protection against carbon frames, use it combined with fuel tanks.. and much more.

  • this Strip including round U shape EPDM.
  • the profile is U shape and its 5.5mm diameter, with cut to fit perfectly 1-2 mm frames.
  • See images for exact dimensions and sizes.

 

€3.00

Inc. VAT
Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm, set of 4

Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm, set of 4

Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm,

Specifications:

  • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 4x2.5mm), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
  • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 4x2.5mm eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
  • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
  • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
  • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
  • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
  • The CFRP ball joint adapter can be painted easily.
  • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
  • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
  • The result is a high strength component, which does not bear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All CFRP components are manufactured in Germany using the latest CNC machines.

Package including:

1 key

4 Adapters

€8.00

Inc. VAT
Quantity
Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm, Set of 4

Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm, Set of 4

Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

Specifications:

  • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
  • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
  • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
  • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
  • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
  • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
  • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
  • The CFRP ball joint adapter can be painted easily.
  • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
  • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
  • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
  • The result is a high strength component, which does not bear comparison with Duralaluminium.
  • However, it is lighter and vibration resistant.
  • All CFRP components are manufactured in Germany using the latest CNC machines.

Included in the package:

1 key,

4 ball joint adaptor

€8.00

Inc. VAT
Quantity
Carbon Fiber Magnetic Blade Balancer 300mm

Carbon Fiber Magnetic Blade Balancer 300mm

Magnetic balancers are the best form of balancers you can get as frictional losses are virtually zero, giving very high blade balancing accuracy.

High quality carbon fiber reinforced blade balancer.
Height- 300mm

€29.00

Inc. VAT
Quantity
Carbon Fibre Woven Finish Roll Wrapped tube 30x27 1000mm

Carbon Fibre Woven Finish Roll Wrapped tube 30x27 1000mm

Tube is a very high quality carbon fibre tube made with Pullwinding production technology. The material of the tube in question is a mix of glassfibre, carbon fibre and epoxy.
The tube is light weight, strong and stiff and is well suited for demanding applications.
The outer diameter of the tube is 30 mm and inner diameter 27 mm. Length of the tube is 100 cm and the color is black.
Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

  •   Size:30mm out diameter 27mm inner diameter
  •   Length: 1000mm
  •   HYBRID Carbon Fiber
  •   Quantity: 1pc

Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

please advise +- the size how you want them cut, example 50/50cm, 30-70...

€59.90

Inc. VAT
Quantity
Carbon Gyro plate

Carbon Gyro plate

Replacing the plastic plate, Solid mounting , Better damping

Set of 1 plate

€3.00

Inc. VAT
Quantity
Carbon MultiRotor Props 16 x 5,5 (set L+R) CW+CCW

Carbon MultiRotor Props 16 x 5,5 (set L+R) CW+CCW

Ultra Strong and light full Carbon Weave professional multirotor props. These are the stiffest, strongest props you'll find anywhere at this weight.

Size: 16x5.5

set of Left and right Props

€33.00

Inc. VAT
Quantity
CARBON Propeller set 12x5.5 T-motor style CW+CCW

CARBON Propeller set 12x5.5 T-motor style CW+CCW

T-motor style (flat center) Pair of  12X5.5 Carbon Fiber Propellers CW/CCW for multicopter

Specifications:
 

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 12X5.5 cw, 12x5.5ccw
  • High gloss 3K finish
  • Very strong and light weight

Included : Pair: 1 CW, 1 CCW

€18.00

Inc. VAT
Quantity
CARBON Propeller set 13x5.5 T-motor style CW+CCW

CARBON Propeller set 13x5.5 T-motor style CW+CCW

Multicopter T-motor style (flat center) Pair of  13X5.5 Carbon Fiber Propellers CW/CCW

Specifications:

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 13X5.5 cw, 13x5.5ccw
  • High gloss 3K finish
  • Very strong and light weight
  • Included : Pair: 1 CW, 1 CCW

 

€18.00

Inc. VAT
Quantity
CARBON Propeller set 14x5.5 T-motor style CW+CCW

CARBON Propeller set 14x5.5 T-motor style CW+CCW

Multicopter T-motor style (flat center) Pair of  14X5.5 Carbon Fiber Propellers CW/CCW

Specifications:

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 14X5.5 cw, 14x5.5ccw
  • High gloss 3K finish
  • Very strong and light weight
  • Included : Pair: 1 CW, 1 CCW

 

€19.90

Inc. VAT
Quantity
CARBON Propeller set 15x5.5 T-motor style CW+CCW

CARBON Propeller set 15x5.5 T-motor style CW+CCW

Multicopter T-motor style (flat center) Pair of  15X5.5 Carbon Fiber Propellers CW/CCW

Specifications:

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 15X5.5 cw, 15X5.5ccw
  • High gloss 3K finish
  • Very strong and light weight
  • Included : Pair: 1 CW, 1 CCW

€19.90

Inc. VAT
Quantity
CARBON Propeller set 16x5.0 T-motor style CW+CCW

CARBON Propeller set 16x5.0 T-motor style CW+CCW

CARBON Propeller set 16x5.0 T-motor style CW+CCW

Specifications:

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 16x5.5 cw, 16x5.5 ccw
  • High gloss 3K finish
  • Very strong and light weight
  • Included : Pair: 1 CW, 1 CCW

 

€35.00

Inc. VAT
CARBON Propeller set 16x5.5 T-motor style CW+CCW

CARBON Propeller set 16x5.5 T-motor style CW+CCW

Multicopter T-motor style (flat center) Pair of 16x5.5 Carbon Fiber Propellers CW/CCW

Specifications:

  • Material: Carbon fiber
  • Epoxy resin cover
  • Size: 16x5.5 cw, 16x5.5 ccw
  • High gloss 3K finish
  • Very strong and light weight
  • Included : Pair: 1 CW, 1 CCW

 

€39.00

Inc. VAT
Quantity
Carbon Steel  Finish E-Clip

Carbon Steel Finish E-Clip

The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. The three prongs of the E-Clip make contact with the bottom of the groove and provide a shoulder for effective retention of the assemblies.

Standard material: Carbon Spring Steel SAE 1060-109
Standard Finish: Phosphate and Oil Benefits
Cost effective replacement, durable, removable.

Assortment of E-Clips. Pack of 10 pcs, Sizes of #2-2.5-3-4-5-6 ( Size sometimes shown as # symbol )

€1.90

Inc. VAT
Quantity
Carbon-Fiber 3K Matte twill tube 15x13mm ,1000mm long

Carbon-Fiber 3K Matte twill tube 15x13mm ,1000mm long

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

  •   Technology : 3K Matte Twill Matte
  •   Size:15mm OD/ 13mm ID
  •   Length: 1000mm
  •   Quantity: 1pc

€16.00

Inc. VAT
Quantity
Carbon-Fiber 3K Matte twill tube 20x18mm, 1000mm long

Carbon-Fiber 3K Matte twill tube 20x18mm, 1000mm long

Our carbon tubes also used in Light aviation and UAV, the tubes are tested into Bending force.

Those  Roll wrapped carbon fiber tubes are manufactured by wrapping multiple layers of 12k UD and 3k twill carbon fibre pre-pregs around a metal mold and then cured at high temperature. The UD pre-pregs are used in core layers whereas the twill is on the surface.

Carbon Fiber 3k Roll wrapped high strength carbon fiber tubes matte twill tube finish.

Can be used as replacement for Boom, Sky hero tubes and more.

Specifications:

  •   Technology : 3K Matte Twill Matte
  •   Size:20mm OD/ 18mm ID
  •   Length: 1000mm
  •   Quantity: 1pc

€19.90

Inc. VAT
Quantity
Page of 17