Europe based Mega-Store of RC Helicopters, Drones, Planes

This is the Allign T-Rex TN70 Super Combo Nitro Helicopter Kit. This high end nitro helicopter kit is loaded with updated features that elevate this kit to a higher level of performance and reliability. Equipped with CNC machined metal reinforcement plate and brace for added protection, heat dissipation and improved reinforcement to the mainframe and updated tail belt drive pulley design that effectively reduces vibration and tooth sweeping! In addition, an updated swashplate with an improved mounting rod design that provides supreme reliability and stability while preventing the detachment of the rods during extreme maneuvers.

This particular model comes with all electronics , Motor, Muffler, see details below!

Included in this combo ( Please note we have added better quality electronics )

TN70 kit x 1
690 Carbon Main blades x 1
105 Carbon Tail blades x 1
Align 105 Muffler x 1
OS 105 HZ engine x 1
Savox 1258TG+ or DS725 servo x 3
Savox 1290mg servo x 1
Savox SH1257 midi servo x 1
MAXX SmartGloo Glow Plug Igniter x 1
BeastX FBL unit x 1
Governor Sensor  x 1

This is the Allign T-Rex TN70 Nitro Helicopter Kit. This high end nitro helicopter kit is loaded with updated features that elevate this kit to a higher level of performance and reliability. Equipped with CNC machined metal reinforcement plate and brace for added protection, heat dissipation and improved reinforcement to the mainframe and updated tail belt drive pulley design that effectively reduces vibration and tooth sweeping! In addition, an updated swashplate with an improved mounting rod design that provides supreme reliability and stability while preventing the detachment of the rods during extreme maneuvers.

The body design was engineered to be narrow and efficiently decrease gear abrasion and frame deformation during flights with a lightweight and impact resistant landing skid to increase the overall durability of the T-Rex TN70. Additionally, the Anti-rotation bracket is constructed from metal and wear resistant composite to effectively reduce friction resistance and have better precise servo movement. Another great updated feature is the steel alloy clutch liner that adds durability and increases heat dissipation. Also, the rotor head was updated to a CNC machined LCG (Low Center of Gravity) lightweight aluminum design, paired with a CNC carbon steel grinding spindle to provide excellent stability and flight control! Get the T-Rex TN70 and experience the top level of quality and performance with this powerful Chopper

Features:

• Fast and remarkable carbon fiber tail boom design
• High performance Allign 105 pipe that increases the overall power, reduces the noise and increase flights duration with fuel saving characteristics
• Updated tail belt drive pulley design that effectively reduces vibration and tooth sweeping
• CNC machined metal reinforcement plate and brace for added protection, heat dissipation and improved reinforcement to the mainframe
• Updated CNC machined LCG (Low Center of Gravity) lightweight aluminum rotor head paired with CNC carbon steel grinding spindle to provide excellent stability and flight control
• Engineered narrow body design that efficiently decreases gear abrasion and frame deformation during flights and increases overall durability
• Updated lightweight body design with quick and continuous power response
• Updated lightweight (120g) canopy
• Guide R angle frame design that effectively reduces the hardness and anti-deformation ability
• Updated lightweight and impact resistant landing skid
• More stable widened structure
• Press buckle canopy mounting bolt design
• Anti-rotation bracket constructed from metal and wear resistant composite to effectively reduce friction resistance and have more precise servo movement
• Updated super durable CNC machined Helical thread main drive (107T) gear
• An integrated motor mounting bracket for more efficient heat dissipation
• Properly tightened tail belt through the pulley arm to make maintenance more convenient and the flight more smooth
• Updated torque tube umbrella gear made of industrial grade fiber composite with high rigidity and wear resistance features
• Updated steel alloy clutch liner for added durability and heat dissipatio

Specifications:

• Engine: 105 Nitro
• Length: 1352mm
• Width: 202mm
• Height: 397mm
• Main Blade Length: 690mm
• Main Rotor Diameter: 1543mm
• Tail Length: 105mm
• Tail Rotor Diameter: 279mm
• Fuel Tank Capacity: 630cc
• Weight: Approx. 4110g
• Main Drive Gear: 107T
• Autorotation Tail Drive Gear: 102T
• Tail Drive Gear: 23T
• Gear Ratio: 7.43 : 1 : 4.23

Includes:

• Align 105 High Performance Pipe
• 650cc Fuel Tank
• Governor Sensor
• 690mm Carbon Main Blades
• 105mm Carbon Tail Blades

The classic four-stroke OS MAX engines of the FS-Surpass series are years of proven highly reliable and powerful power units, representing the first choice of modelers in the world for RC models and aerobatic models. This allows you to benefit from a wide range of kits and building plans for model aircraft built for OS engines in recent decades.

• Two-needle Type 70N carburetor with pressure regulator and improved PD-08 fuel pump ensures highly reliable, stable and regular operation throughout the entire rpm range and during acrobatic turns; as well as easy engine tuning.
• The carburetor can be rotated 180° to direct the main needle and the carburetor lever to the other side to facilitate installation in model engine covers.
• The crankshaft, camshaft and piston ring are provided with a special corrosion-resistant coating.
• Special ball bearings with grease filling and double sealing.
• The expansion muffler with larger volume provides effective damping and gives the engine a deep soft sound.

The FS 120 SIII is a four-stroke engine with a valve train designed for model aircraft of all kinds; it is especially suitable for RC models and acrobatic models. It is equipped with a 70N type two-needle carburetor with a pressure regulator and a PD-07 fuel pump. The basic set includes a new expansion muffler type F-6020. It is also possible to use flexible adapters ("goose neck") with a length of 120 to 240 mm, which are particularly suitable for hidden installation inside the engine cover of mock-ups.

• The crankshaft is threaded for a UNF 5/16-24 propeller nut, a set of OS lock nuts is supplied in the basic engine assembly for reliable fastening of the propeller.
• Recommended propeller dimensions: Sport and Acrobat: 13x11-13", 14x10-11" / Model: 15x8", 16x6-8", 18x5-6" or three-bladed 14x7", 15x8"
• Recommended fuel tank: 450-500 ml; The 450 ml tank is enough for about 14-15 minutes of flight, provided that you are not always flying at full throttle.
• Recommended fuel: at least 18% castor or equivalent synthetic oil, 5-15% nitro-methane.
• Recommended candle: OS MAX type F.

Engine kit includes: FS 120 SIII engine with RC 70N carburetor with pressure regulator and PD-08 fuel pump, F-6020 muffler, owner's manual.

This is a Logo 700 helicopter kit, which was mounted, but not flown.
you can see all photos of it.

Delivered with Rapid FBL blades, and tail blades.
Possible to add Xnova 4035-1000 for 6S setups, or Scorpion 5024-535 for 12s setup 

Special price for motor if purchased with the Logo

Futaba 12Z 12-Channel 2.4GHz TRANSMITTER With TM-14- Second hand

THIS Radio was very little used, but in perfect condition.

Included:

12Z transmitter

2 TX batteries with charger

TM-14 module

R6014 receiver, R608FS receiver

Alu Case, and accessories inside

See more Photos for details

Fits 90/105 size helicopters, according to the strength character of 90/105 engine to design, features much increase the horsepower, fuel-saving, low noise, and the highest air exhaust volume on the market.

Great design and test to three spaces: expansion chamber, accelerated section, silencer chamber, high efficiency and the quick respond of medium speed and high speed, great for 3D flying.

Suitable for most 91-105 Engines

• Size:49.1 x 318 x 81.75mm
• Weight:225g

Accessories:

• 105 High Performance Pipe x 1
• Pressure Nipple x 1
• Pressure Nipple Spacer x 1
• Exhaust Guide x 1(13.5x18.5x79.75mm)
• Muffler Spacer x 2(51x13x1mm)
• Socket Collar Screw x 2(M4x45mm/Tooth Length 21mm)
• Collar Screw x 2(M4x22mm)
• M4 Spring Washer x 4
• Strap x 1(100mm)

The YGE BattSwitch is a very compact buffer circuit that makes it possible to operate a BEC with a buffer battery and switch it off at the touch of a button. It differs from other buffer solutions in that it has no self-consumption when switched off, which means that the battery can remain permanently connected. Furthermore, you can use a battery of any size with a voltage of 5.0V to 13.2V, making it suitable for the smallest helicopters or airplanes as well as for large models. The BattSwitch comes as a pure circuit board and therefore as a kit. Any connectors (e.g. XT30, XT60, XT90, Deans, gold connectors...) or cables can be soldered to the input and output.

BEC voltage and battery must be selected to match each other. We recommend setting the BEC slightly lower than the end-of-charge voltage of the battery.

Examples:

BEC voltage 8.0V-8.2V with use of 2S Lipo.

BEC voltage 12.0V-12.2V when using 3S Lipo.

BEC voltage 7.0V-7.1V when using 2s LiFe.

The battery does not need to be recharged after every flight, as it is kept at the set BEC voltage by the BattSwitch. However, it should be checked and balanced with a charger at least once per season.

Our BEC controllers are suitable, except for the YGE 35LVT. When using the BattSwitch with controllers from other manufacturers, please check the buffering capability of the BEC

Safety instructions:
The battery must be fully charged or charged to the selected BEC voltage before first use! The battery switch has no reverse polarity protection and can be damaged if the polarity is reversed.
Connections: The connections are also labeled on the back of the circuit board.

Undervoltage:
Please note that the BattSwitch is purely an electronic switch that connects or disconnects the buffer battery to the receiver system. It has no undervoltage detection, which means that the battery can become permanently over-discharged if it is not switched off. This is because the operational safety of the receiving system is paramount. In the event of a failure of the main power supply, the buffer battery should maintain safe operation for as long as possible and thus ensure a safe landing.
Overcurrent:
The BattSwitch has no overcurrent limitation for the above-mentioned reason. It can be loaded with 30A, making it suitable for large models and current-hungry servos. Make sure that the connected battery is full or has approximately the same voltage as the BEC when switching on. If an empty battery is connected, it will be charged quickly with the maximum BEC current. Our BECs and the BattSwitch can handle this, but most smaller buffer batteries cannot. If a full buffer battery is connected, it is discharged to the set BEC voltage by the receiver system during operation and then kept at this voltage

Technical data:

Suitable battery types: LiPo, LiIon, LiFePo4, NiMh, NiCd
Input voltage: 5.0 - 13.2V
Output voltage: 5.0 - 13.2V
Maximum output current: 30A
Dimensions: 19.5 x 17.4 x 6.7mm
Weight (without connector): 1.5g
Contents: -Assembled BattSwitch circuit board without connector
-2 pieces of shrink tubing

Suitable for TN70 / T-REX 600N / T-REX 700N.
Must with Microbeast flybarless system. From experience works also on other systems.
Beastx Governor Sensor x 1(28AWG/305mm/6Pin)
RPM Magnet x 2

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link

The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price.

 Features:

•     Long range, adaptive and robust remote control system for your aircraft
•     Immune to on-board noise
•     Two-way communication link with real-time link vitals and telemetry
•     Self-healing & frequency hopping (DSSS, FHSS)
•     Adaptive bandwidth control and range optimization
•     RX beacon mode to recover your downed aircraft
•     Super easy binding and configuration via built-in display of your R/C
•     Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
•     Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
•     8 or 12ch output via SBUS/PPM/CRSF on both receivers
•     Ability to fly with multiple friends at the same time (10 or more)
•     Selectable RF power from 25mW to 250mW (local restrictions apply)
•     Transmitter LED shows link health
•     Micro-receiver for smaller drones. Smaller than you think!
•     Software updates via RF Link

 
Technical specifications:

•     Frequency Band: 868MHz- EU
•     Input Voltage: 6.0 - 13V
•     Connector : USB-C
  
•     Power consumption: 1.1W (@10mW) - 2W (@100mW)
•     Dimensions: 65 x 48 x 22 mm (JR module size)
•     Weight: 48g

Package includes

• 1 x TBS Crossfire Micro TX V2
• 3 x TBS Crossfire Nano RX
• 3 x TBS Crossfire Micro Receiver Antenna
• 3 x TBS Crossfire Immortal T V2 Antenna
• 1 x Taranis QX7 Mod
• 3 x Cables and Shrink Tubes set

The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

This is a long version of the Safe product, measuring internal dimensions of 340x70x65mm, fits long Stick Lipos 12s and even some 14S packs- verify the size of your lipo to be sure it fits inside the bag.

The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Instructions to use:

Ensure that charger rate is properly set and polarity is correct

1. Attach charging leads to battery
2. Place battery in LiPo Safe towards the bottom
3. Place LiPo Safe on non-flammable surface
4. Route charge leads through vent at the top seam of the LiPo Safe
5. Close top flap of LiPo Safe and press hook and loop closure fully closed
6. Charge battery using proper charging practices
7. Always practice extreme caution when charging and never leave a charging battery unattended

Please check the Video showing the use of Lipo Safe

This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector

Set including 8 PAIRS.

Featuring a unique patented banana plug lock design, these Pro-D6 connectors securely lock in place handling quick movements and vibrations, commonly found during extreme 3D flights, without coming apart. The stronger jacket and snaps extends the advantages of the previous generation of Supra X Connectors and makes them better.

These connectors are a great solution for your high current and high voltage demands offering a large, low resistance surface patch for efficient power transfer. The 24K Gold Plated bullet plugs feature a recessed wire cavity and solder windows making assembly hassle free, while the sheath uses high temperature capable, impact-resistant plastic imported from Japan.

Cover material:IDEMITSU plastic
Banana connector diameter:6mm
Suggested Wires:8AWG-10AWG
Capacity (Continuous):200A
Capacity (Burst):240A
Banana connector material:Class A Cooper C54 Series
Plating:24K Gold / Flash

Features:
Connection between battery and ESC
Can be used for 4 batteries and 4 ESCs (or 4 charger cables)

Package Included:
4 x Set
8 x 6mm Female& Male Bullet Connector

FPV x230 Racer With Gimble,1080P Wide Angle HD Camera RC Quadcopter RTF

• Built-in 120° wide angle and 1920 x 1080P HD camera to get the high quality shooting;
• Equipped with 2200mAh smart flight battery.
• Flip 360° steadily;
• Real-time transmission for FPV action video.

Remote control:

• Built-in video transmitter to improve the transmission quality and reliability of communication;
• Equipped with camera and operation button to control easily.

Package Included:

• 1 x X230 Multicopter
• 1 x Battery
• 2 x ABS 5030 propeller
• 1 x Balance charger
• 1 x Charger cable
• 1 x Adapter
• 1 x 4 pins connection wire
• 1 x Screw bag

Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 100, 200, 300°C.

The station is ideal for home elektronics, school, workshop, service, production and lab.

Among the easy and quick temperature adjustment with the up-/down-buttons in 1°C- and 10°C-steps, it is possible to pre-select 100°C, 200°C and 300°C with the related button.

• Compact, solid and insulated housing.
• Station and soldering iron pod are arrangeable seperately.
• Complete with soldering iron pod and soldering sponge.
• LCD display with ilumination shows must- and actual value.
• Energy display
• 3 pre-selectionable fixed temperatures
• Electronical sensor
• Temperature controll
• Short heating-up time thanks to its generous designed power supply
• Powerful 48W soldering iron for a wide range of application
• Temperature adjustment with buttons from 150 to 450°C, 1°C and 10°C steps
• Optical and accoustic error message in case of malfunction
• ESD protection

Technical Specification:

• Input Voltage: 230V (220-240V), 50 Hz
• Power of soldering iron: 48W
• Fuse: T 1A/250V
• 150°C-450°C temperature adjustment with 1°C- and 10°C-steps
• Display accuracy: 5%
• LC-Display with 3 1/2 digits
• Dimension WxHxD: 210x125x135mm
• Weight 1,8kg

Delivery:

• Soldering station ZD-937
• Soldering iron pod with drawer and soldering sponge
• Soldering iron with tip 1,6 mm
• German and english manual

This "economy" spanner set includes just about all the sizes you will ever need on a model heli.
Ideal for you field box and building bench.

Sizes included are : 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm.
Set of 10 spanners

TITAN DC5 w/ DJI Air Unit BNF built for  the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly!

This model can accept up to 6s, but the motors mounted are designed to be used with 4S.

You can use Any radio you want, you will need to add your receiver and bind and calibrate it.

If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller.

ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires
• Designed to support DJI Digital FPV.

BNF // Parts lists

• 1x TITAN DC5 HD Frame
• 2x TPU camera side plate soft mount
• 1x iFlight Lipo Strap
• 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
• 4x XING 2207 Motor Unibell (4S 2450KV)
• 1x SucceX- F7 Flight Controller
• 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S

Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
See the specs below.

• Anakin club racer Frame kit Xnova 2204-2300Kv motors, esc, props- Included and factory preinstalled.
     Note: if you choose other motors, you will need to assemble the kit yourself, you will receive all components, but not ARF version.
• CC3D Metal Case controller included
• PDB-Bec
• FPV Camera included
• RADIO link AT9 with receiver Sky hero version (white edition ) but not installed

Not included:

• Lipo charger
• Battery 3s 1300-1500 mah
• VTX - optional

Sky hero did it again, with the latest drone technology, you have the possibility to fly the freedom of birds.
With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
Strengthened with flat arms.
this was developed with the vision that FPV racers deserve a near-indestructible machine, agile racer they can trust.
Locked in trajectories and customizable.

General specs of Club racer versions.

• Full carbon frame- Crash resistant.
• Innovative abutted A frame design.
• Minimized vibrations distribution, Optimized shock absorption
• 3K 4mm Carbon
• Sandwitched frame plates

• Fully protected electronics
• Optimized Shape, size and frame thickness, delivering outstanding strength-to weight ratio
• Responsiveness- so rigid, that you feel "At one" with your frame.

ESSENTIALS

•     Entirely designed for racing
•     Flat arms conception for highest impact resistance
•     Simplified option for easy components replacement
•     Low drag, for higher speeds
•     Electronics fully protected

KEY FACTORS

•     Premium choice for FPV
•     High wind resistance
•     Super fast

Customer expected to add and program the machine, its not coming pre-programmed